3:50 what a jerk-off thing to say, speak to me like that and you can hire someone else, and it’s not just this instance I’ve noticed this behaviour, must be an awful place to work…
It looks like the resin was too cold when you mixed it. I usually warm both parts in a warm water bath to about 85F before mixing. This will get rid of the milky appearance and will result in a crystal clear epoxy pour.
As much as I hate corporate nonsense, you should make a checklist for your river tables. Means you can have each step laid out (split slab, flatten slab, make mold, apply mold release, yadda yadda...) And you know when it's done and by whom. Less steps forgotten and you've got a paper record to file away. Your shop is big enough to need this kinda stuff!
They probably do that already but pretending to fumble and bumble around is better content. These guys are pros, pretty sure they have their stuff together
Every pour, complains about bubbles knows they should have sealed the wood. Every pour complains about the mold sticking, knows they should have used release.
Bubbles and sealed, now I'm no expert and I will never build one of these tables, they look cool but I have enough trouble with simple builds. However, I watched someone in Africa do a table poor while they were also selling a pour video guide and they do NOT seal wood edges ever anymore because they say they want the poor to penetrate the wood, and what do I know I know they do not seal edges before a poor and they might not think your comment makes sense. I know everyone who does stuff knows exactly how to do it and why they do it the way they do it :) Have fun with all your builds.
@@basildaoust2821yeah, but in this case he did say something along the lines of “I should have sealed it” and “I should have put mold release”, claiming the RUclips upload schedule needed to be met, thus it coming out not perfect. I also have no idea on builds this big that envolves epoxy and how much these steps would have changed it, but to spend this much time and materials on some thing he knew how to do better is simply a stupid algorithm thing (and lack of planning for extra allotted time)
It looks awesome. In my experience, when you want that level of clarity you need to go so far as to polish the resin to 3k minimum. Then wet sand and polish the finish to at least 10k grit. I know it’s a ton of work. But it is the only way I have managed to get the result I wanted.
to get the clear resin, you need to stir it slow speed until it clear up before pour it in the project. Most manufacturers recommendation for mixing time is not enough. Polishing is just to make shiny at the surface.
The table top is really nice. Love the frosted look and the geometric shaoes but i think yout best creativity was that base. Totally makes the entire table. Brava!👏👏👏
Yes, commonly referred to as the seal coat which he referenced somewhere around 9:30 as he was explaining they didn't really have time to do because video scheduling & weekend. It's a table he was giving away for free, kind of understandable that he took a couple minor shortcuts for timeliness.
I liked that base... black steel contrasts beautifully with the walnut inlays and open spaces 😻 From what I understand (from Rybonator's resin dice videos), to get perfect crystal-clear epoxy you'd want to degas it in a vacuum chamber, pressure cast (not sure where you'd find a dining-table-sized pressure pot!) and then wet sand to 3000+ grit using things like Zona Paper.
@@davidkleinman4920 Agreed, I do not have a vaccuum chamber and I have built clear epoxy tables. I would not wet sand to 3000, but rather wet sand to 1000-1500 and polish from there
Stoked to see a project video come out! How did you expect the resin to be clear though only sanding to 320? I take my resin pieces up to 8000 grit before going in with a grit paste up to 100,000 grit. Then apply finish. Think this would’ve looked incredible if you polished the resin and not the spray finish!
@@ethanlane4734 I use a product called Kustom Grit. Made by Kustom Creations. It’s a 2 part system. Part 1 is rated at 50,000 grit. Part 2 at 100,000. It works well as finish in itself, or you can add to it after. Completely food safe as well. They make a range of products that are all food safe and great!
@@ethanlane4734 3M make a good set of two pastes, but they're quite pricey. I suppose it depends on how often you're going to use it and for what projects - commercial or personal. Maybe make yourself up a little set of 20 test pieces and try out lots of combinations of grit and paste, starting with a budget one from a motor vehicle equipment suppliers.
Table came out super cool. Something with that much work I think definitely would have been fine in a multi video series, that way you maintain the weekly schedule but aren’t as rushed. I know everyone appreciates a full build in one video though too, just a thought. Thanks boys
Before watching, currently at 1:24. Im a Blacksmith, delving into woodworking myself. In my head the ideal solution to making this table to me would be to cut out the negatives, leaving the desired geometric shape behind with a saw from above but not all the way through the slab. Then, you fill the voids with resin, skipping the need for a temporary bottom and having to align small chunks of shapes. After curing you could then just plane sand and polish to dimensions, and plane off the bottom until it fully reveals the resin and pattern.
I do this kind of table for a living and there was two big issues here. Granted clear epoxy is hard work, but it was just a non starter when you didn't seal the edges before the pour, the wood will release a load of bubbles into the epoxy, on top of that the epoxy was slightly crystalized, that's why it looked milky when you poured. It happens when it gets cold, perhaps in transit. To get it back to normal you can't just warm it, it actually has to get pretty hot, you will need a close to boiling water bath. If it's anything but crystal clear when you mix it's going to be cloudy and might not cure properly.
13:05 I like the implication of a larger shop just giving you more room to mess everything up, but now in different rooms... at least when you storm out of one problem, you have another waiting for you!
Not that you'll see but other makers put a tiny amount of blue pigment in to the resin which for some reason makes it super clear and stops it yellowing over time.
Havent watched the video yet, but an easy way to set the pieces with negative space would be to do it without completely cutting through the wood, to cut in the design, but not completely cut through the wood, leaving a wood base at the bottom. Then, after the epoxy cures, lap the top to level it, flip it over and lap to remove the wood until the negative space is revealed. Edit: I literally described exactly what they did, haha.
I have seen tables like this warp before; I put it down to more epoxy being on top than on the bottom causing the timber to warp as the epoxy cures and contracts ! I also found if you place the warped table outside in direct sunlight (heat) and monitor is closely; the epoxy softens and the warp is removed ! I am sure you can work out how I know this lol ?
Awesome. Can't wait to see more updates an projects and many more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Stay squirrely. Keep making. God bless.
Its beautiful and would look perfect in my dining area once my house is done being rebuilt. Fire totaled my home back in Feb, we lost everything. The upside is that the residence is allowing me to do an upgrade Mid-century feel.
i just started the video, and my initial thought is either that, or they poured a first layer or resin, put the slabs in, let it cure, routed the shapes and then poured the rest.
I like that you always give credit to the person you get your ideas from. And I agree, it looks extremely difficult! Great work though, I love your videos
try some release agent, which is used for moulds. like for composites. wax is not good for higher temperatures. something like loctite 770-nc and similar
I love the shape of the tables and the hexagon This looks great. It doesn't matter what you do you always mess up every single time. Be proud of your projects no matter how they turn out cuz I always turn out great 👍
I know John is the main character here but I have to shout out your editor and film guys. They make your videos a 1000 times more enjoyable with all the memes and references and good cuts. Y'all are great 👍
I like this one better than most the rest. If your having trouble getting scratches out, look to the General Aviation industry. A lot of our windshields are plexiglass that require bbuffing to a clear finish, NO scratches. The guys that do that are artists.
I know you are pros but mistakes happen and it warms my heart to know that you can make them as well. If I haven't made a mistake by the end of the day it's because I was not in the shop all day. Strong work.
If your worried about it bieng too thin, and you want it to be thicker, you could pour a second coat of countertop epoxy, it will add thickness and no need to sand and polish.
When cutting out the geometric shapes, don't cut all the way thru. Leave a thin (1/4") piece left to connect the geometric shapes for the pour. Then when you flatten the table, take that thin strip off the bottom to expose the epoxy and shapes.
I think you got it right when you said and I paraphrase "I rushed to get a video ready" problems were sure to follow. Once design was set a combination of changing spindle speed tool size rate of feed and cut depth per pass would have eliminated the tear out issue and undoubtably increased cnc router time substantially. Of course after the fact cnc could have drilled two holes in mold bottom where each seperate piece was located thereby allowing you to screw into slabs from the bottom securing each seperate piece of the project before cnc cutting and as added benifit hold wood pieces down and in place during casting. Without pouring in layers if your casting table is not cooled invites a loss of epoxy clarity. I still like the finished table especially the care you took with the base and will enter contest. Great project. Ray Stormont
Cool looking table, and yes, mistakes always come when you rush it. But it still came out great! A future project I'd like to see from you guys is a Bourbon Barrel cabinet.
If you want a truly see-through epoxy that is basically like glass, you need to not only use a certain type of epoxy that won't cloud up as it cures, but also put it in a vacuum to pull out ALL the bubbles and seal the wood with a brushing of epoxy
I've seen a similar technique used to create a wood and resin table with sensors on the back of each geometric shape that turn on LEDs when something is on top of that shape. It looks pretty amazing. I like the idea of using LEDs under resin tables in general
Wet sand the resin up to 3000 grit then polish the resin to get the clarity your looking for. Then clear coat it if you still want a clear coat over it.
I think you did well, trying things from other makers doesn't mean they should be a carbon copy. I like the milky middle, I think it turned out awesome
To be honest I love to see wood in its natural form, and even the first geometric cut that you said cut uneven, if I were a client, I would have loved that spoil. It would be mine, unique.
I wonder if using a stainless steel table or a mechanics metal work bench would help you disapate heat on the bottom of your pour. could even mount a fan to blow up at the table so any cold air from the air con will be forced back up.
love it 😍 I would of trimmed a few inches off on the end of the table at 20:00 so you don't see that corner of the wood pieces, but love the rest of it
Final product is sharp! I agree with you that the hazy look of the epoxy looks better than the clear. If I was closer Ild try buying the scrapped base from you cause I got a slab that would make a nice desk with that base!
The table is beautiful. I actually like the hazy epoxy. I enjoy working with epoxy as a hobbyist and have had micro-bubbles ruin entire projects so, I’m usually not fond of them :) Black Forest Wood Co. has air conditioning units under their pouring tables. For future builds it might be worth checking into. Heavy D Sparks is auctioning off some industrial air conditioning units, he may have a good deal on something that would work for you.
I like the cloudiness though I'd prefer a galaxyesk swirl on the underside with some magenta purple and gold highlights on a black base. In all honesty I do not like the clear see through resin in tables. The last thing I want to see at the dinner table Is someone's feet.... or worse.
One solution for dealing with bubbles in resin is a pressure chamber. basically crushing the bubbles until they are imperceptible to the eye. If you are going for a crystal clear pour, it is something worth exploring. It is what we do, for Miniature casting to avoid bad casting
For a pressure chamber to effectively work, the piece has to be kept under pressure throughout the entire curing process... Do you not see the overall size of what they're working on? They've also used pressure chambers in past videos so not a new concept. Let's use some logic next time
That epoxy is shrinking as it cures, especially with a pour that size. You could have sealed with a spray poly to eliminate bubbles in the top. Seal coating the back side with epoxy before putting in the mold could have also prevented cupping.
at 2 minutes in the video... i'm hoping to see cnc used to cut MOST of the way through the slabs for the design but not entirely, then epoxy poured in. After the epoxy sets plane down the whole length to cut through the remainder, and BOOM, you can see through each gap without worrying about how to get the gaps perfectly spaced.
I'm making a pre watch prediction. The way I think it should be done is make a table a bit thicker than normal. Leave like 1/4 in or something reasonable left in the depth after doing the CNC for all the geometric shapes. Then after you pour, CNC the last bit of 1/4 of the wood off the bottom.
I love your videos!!! they are very informative both on what to do and not to do 😂 ive watched about all of your videos. Beautiful table who ever wins it will be a happy person 😎
Cool table! The frosted glass look is cool too. Obviously Total Boat is not the right choice in epoxy. Hopefully you got it free. Superclear epoxy seems to be a better choice, based on some other videos I've seen.
Dammit John again a can't win this!! 🏴🏴🏴 You need another shirt run for dammit Chris this time! New Sam seems be killing it although we both no Jordan wouldn't of made those mistakes!😅 Love the build turned out awesome! Think we need see some milling again saw logs smoke hog's oh and shop chef!! Or 1 slab challenge what and how many things can u make from 1 5ft section of a slab! 👍🏴🤔
My god... that wood was gorgeous after you did the initial plane. But great table also. But the naked wood is just absolutely gorgeous chocolaty purple color
Quick question for ya John. How flat is "flat" for a wooden table. I used a router sled and somehow ended up with a .65mm cup on a cookie, I'll take more passes later but it got me thinking about flatness. Would appreciate your thoughts. Love the vids!
Putting down a tarp or towel and spraying it by hand so it damp but not soaking/slippery will stop you from kicking up dust with your steps. Building a sorta cover rig that you can throw a clean tarp over to stop stuff from free drifting into it? Also part of me would say if you could induce positive pressure in the room (aka more air being pumped in than out) so whenever you open the door the air rush out of the room and will blow out any dust that tries to enter along with you. Potential hair/beard nets/covers if you are worried hairs will ruin clear stuff. Ik my ideas arent quick and easy but hope they give you some better ideas.
So awesome to see a brand new video! I just found you a couple of days ago and have been watching/listening to hours of videos! Just amazing. Thank you. (This is from someone that lives in a suburb of Cleveland 😅)
The trick to these tables is DON'T CNC all the way through when cutting the shapes. Leave 5mm of material at the bottom and surface it off after the pour has cured
Assuming i had all the tools you do, I'd flatten the top, then CNC the shapes in almost all the way through, leaving them connected on what will be the bottom, then when you put it in the mold, you can pour, then once its dry, you can plane down the bottom below were the tabs hold the shapes.
Fantastic product John. Could you explain to me what you were spraying that you called the Sweet elixir of the gods? And did you buff all the way to the end or sand beyond 500 grit? That was hard work. I’m very impressed
They mill the channels MOST of the way through the slab, so they are still connected and positioned, then do the epoxy pour into the channels, the negative space, and then remove the slab part that was holding the bits together.
Would have been awesome to lay LED strips along the inside edge of the base frame. Light it up from underneath. To get bubble-free epoxy, you need a degassing vessel. Uses pressure (or rather, lack thereof) to get all of the air out of your resin...
Since they have to cut the table to size afterwards anyway, I have often wondered why they just don’t cut the sides of the mold off anyway, just a nip into the wood/resin would still leave excess.
3:50 what a jerk-off thing to say, speak to me like that and you can hire someone else, and it’s not just this instance I’ve noticed this behaviour, must be an awful place to work…
I love your work and imagination. But I especially love your humor and attitude. You are one of my favorite woodworkers
It looks like the resin was too cold when you mixed it. I usually warm both parts in a warm water bath to about 85F before mixing. This will get rid of the milky appearance and will result in a crystal clear epoxy pour.
it would also help to use a vacuum chamber
Thats an epic tip thanks for sharing!
As much as I hate corporate nonsense, you should make a checklist for your river tables. Means you can have each step laid out (split slab, flatten slab, make mold, apply mold release, yadda yadda...) And you know when it's done and by whom. Less steps forgotten and you've got a paper record to file away. Your shop is big enough to need this kinda stuff!
100
It takes from the RUclips fun 😊
At some point, processes become a necessity. He’s definitely at that point.
They probably do that already but pretending to fumble and bumble around is better content. These guys are pros, pretty sure they have their stuff together
@@GUNSnDOZES surely
Every pour, complains about bubbles knows they should have sealed the wood. Every pour complains about the mold sticking, knows they should have used release.
Bubbles and sealed, now I'm no expert and I will never build one of these tables, they look cool but I have enough trouble with simple builds. However, I watched someone in Africa do a table poor while they were also selling a pour video guide and they do NOT seal wood edges ever anymore because they say they want the poor to penetrate the wood, and what do I know I know they do not seal edges before a poor and they might not think your comment makes sense. I know everyone who does stuff knows exactly how to do it and why they do it the way they do it :) Have fun with all your builds.
@@basildaoust2821yeah, but in this case he did say something along the lines of “I should have sealed it” and “I should have put mold release”, claiming the RUclips upload schedule needed to be met, thus it coming out not perfect. I also have no idea on builds this big that envolves epoxy and how much these steps would have changed it, but to spend this much time and materials on some thing he knew how to do better is simply a stupid algorithm thing (and lack of planning for extra allotted time)
@@basildaoust2821 You are correct!
it's the Malecki Way TM
It looks awesome. In my experience, when you want that level of clarity you need to go so far as to polish the resin to 3k minimum. Then wet sand and polish the finish to at least 10k grit. I know it’s a ton of work. But it is the only way I have managed to get the result I wanted.
Wetsand up to 3k then machine compound and polish should be more than enough
to get the clear resin, you need to stir it slow speed until it clear up before pour it in the project. Most manufacturers recommendation for mixing time is not enough. Polishing is just to make shiny at the surface.
The table top is really nice. Love the frosted look and the geometric shaoes but i think yout best creativity was that base. Totally makes the entire table. Brava!👏👏👏
For the micro-bubbles, black tail studios generally brushes on a coat of epoxy on exposed wood surface to keep it from gassing into the epoxy.
he said in the video he didn't seal it because of this arbitrary deadline he has to post a video on youtube lol
@@LykeArgy The algorithm deadline is no joke though. If you don't keep a consistent upload cycle, it will drop your ass.
Yes, commonly referred to as the seal coat which he referenced somewhere around 9:30 as he was explaining they didn't really have time to do because video scheduling & weekend. It's a table he was giving away for free, kind of understandable that he took a couple minor shortcuts for timeliness.
@@longshot726 forgot about the algorithm since i stopped watching MPMD lol, good point
@@longshot726 this is the first video in three weeks
I liked that base... black steel contrasts beautifully with the walnut inlays and open spaces 😻
From what I understand (from Rybonator's resin dice videos), to get perfect crystal-clear epoxy you'd want to degas it in a vacuum chamber, pressure cast (not sure where you'd find a dining-table-sized pressure pot!) and then wet sand to 3000+ grit using things like Zona Paper.
That is necessary for faster curing epoxy. For this type of epoxy it shouldn’t be necessary.
@@davidkleinman4920 Agreed, I do not have a vaccuum chamber and I have built clear epoxy tables. I would not wet sand to 3000, but rather wet sand to 1000-1500 and polish from there
Stoked to see a project video come out! How did you expect the resin to be clear though only sanding to 320? I take my resin pieces up to 8000 grit before going in with a grit paste up to 100,000 grit. Then apply finish. Think this would’ve looked incredible if you polished the resin and not the spray finish!
What grit paste do you use? I've been trying to find a good one to use for polishing my projects.
@@ethanlane4734 I use a product called Kustom Grit. Made by Kustom Creations. It’s a 2 part system. Part 1 is rated at 50,000 grit. Part 2 at 100,000. It works well as finish in itself, or you can add to it after. Completely food safe as well. They make a range of products that are all food safe and great!
exactly what i was thinking, 320 is fine for wood, but for epoxy or clear coat its still considered very course
Yes and I think taht they forget to sand it in other side of the table
@@ethanlane4734 3M make a good set of two pastes, but they're quite pricey. I suppose it depends on how often you're going to use it and for what projects - commercial or personal.
Maybe make yourself up a little set of 20 test pieces and try out lots of combinations of grit and paste, starting with a budget one from a motor vehicle equipment suppliers.
Table came out super cool. Something with that much work I think definitely would have been fine in a multi video series, that way you maintain the weekly schedule but aren’t as rushed. I know everyone appreciates a full build in one video though too, just a thought. Thanks boys
Looks awesome
Before watching, currently at 1:24. Im a Blacksmith, delving into woodworking myself. In my head the ideal solution to making this table to me would be to cut out the negatives, leaving the desired geometric shape behind with a saw from above but not all the way through the slab. Then, you fill the voids with resin, skipping the need for a temporary bottom and having to align small chunks of shapes.
After curing you could then just plane sand and polish to dimensions, and plane off the bottom until it fully reveals the resin and pattern.
That thing turned out great; I love how the river, the wood sides & the base blend together.
I do this kind of table for a living and there was two big issues here. Granted clear epoxy is hard work, but it was just a non starter when you didn't seal the edges before the pour, the wood will release a load of bubbles into the epoxy, on top of that the epoxy was slightly crystalized, that's why it looked milky when you poured. It happens when it gets cold, perhaps in transit. To get it back to normal you can't just warm it, it actually has to get pretty hot, you will need a close to boiling water bath. If it's anything but crystal clear when you mix it's going to be cloudy and might not cure properly.
13:05 I like the implication of a larger shop just giving you more room to mess everything up, but now in different rooms... at least when you storm out of one problem, you have another waiting for you!
Not that you'll see but other makers put a tiny amount of blue pigment in to the resin which for some reason makes it super clear and stops it yellowing over time.
I never knew that about the blue resin
Blue pigment/correction
Makes sense, as glass has just a tinge of blue to it.
It's really cloudy!!
Havent watched the video yet, but an easy way to set the pieces with negative space would be to do it without completely cutting through the wood, to cut in the design, but not completely cut through the wood, leaving a wood base at the bottom. Then, after the epoxy cures, lap the top to level it, flip it over and lap to remove the wood until the negative space is revealed.
Edit: I literally described exactly what they did, haha.
I have seen tables like this warp before; I put it down to more epoxy being on top than on the bottom causing the timber to warp as the epoxy cures and contracts ! I also found if you place the warped table outside in direct sunlight (heat) and monitor is closely; the epoxy softens and the warp is removed ! I am sure you can work out how I know this lol ?
Blacktail studio.
Yeah, Cam from Blacktail Studio did a video on sun-softening to bend an epoxy slab for a side table. Worth a try if things go a little squacky!
Awesome. Can't wait to see more updates an projects and many more videos soon my friend. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Stay squirrely. Keep making. God bless.
Its beautiful and would look perfect in my dining area once my house is done being rebuilt. Fire totaled my home back in Feb, we lost everything. The upside is that the residence is allowing me to do an upgrade Mid-century feel.
He who is fixed to a star does not change his mind.
I reckon they glued the slabs to a sacrificial board then routed the shapes.
After filling with resin they planed or routed off the sacrificial board.
i just started the video, and my initial thought is either that, or they poured a first layer or resin, put the slabs in, let it cure, routed the shapes and then poured the rest.
this video had me checking my screen for dust just to make sure it didn't come out on the table. Nice build!
It's really nice when a RUclipsr is willing to show their fails and not just their successes. Good on ya.
Mistakes are a major part of his channel. His content would be boring without them.
Don’t rush a build, personally I’d rather see you build your best than a rush job.
Love the design and build- after overcoming the obstacles, it turned out pretty rad! 😎😎
I like that you always give credit to the person you get your ideas from. And I agree, it looks extremely difficult! Great work though, I love your videos
try some release agent, which is used for moulds. like for composites. wax is not good for higher temperatures. something like loctite 770-nc and similar
I love the shape of the tables and the hexagon This looks great. It doesn't matter what you do you always mess up every single time. Be proud of your projects no matter how they turn out cuz I always turn out great 👍
I know John is the main character here but I have to shout out your editor and film guys. They make your videos a 1000 times more enjoyable with all the memes and references and good cuts. Y'all are great 👍
I like this one better than most the rest. If your having trouble getting scratches out, look to the General Aviation industry. A lot of our windshields are plexiglass that require bbuffing to a clear finish, NO scratches. The guys that do that are artists.
The bubbles are all the way through this pour though. Buffing would not make this clear.
19:56 yours can use some LEDs. The tiktok one can't. Great job, even with the mishaps. It's beautiful
I love the way this turned out. Great design.
One of my favorite channels. Always entertaining. Not just the same stuff over.and over again.
if you want that clarity you need to vacum chamber the resin before you pour. makes a HUGE difference on bubbles
I know you are pros but mistakes happen and it warms my heart to know that you can make them as well. If I haven't made a mistake by the end of the day it's because I was not in the shop all day. Strong work.
I like that your content is not your day to day job but something you challenge yourself with.
Next time u do clear resin wet the floor everywhere around the project as it stops the dust from flying around
If your worried about it bieng too thin, and you want it to be thicker, you could pour a second coat of countertop epoxy, it will add thickness and no need to sand and polish.
When cutting out the geometric shapes, don't cut all the way thru. Leave a thin (1/4") piece left to connect the geometric shapes for the pour. Then when you flatten the table, take that thin strip off the bottom to expose the epoxy and shapes.
That's exactly what I was coming here to say
I was just going to comment the same thing
Why would that help
@@smashyrashyBecause it would hold the geometric shapes in place during the pour. Which is precisly what they did.
That's what they did
Turned out great! In spite of the issues along the way. It looks Awesome!
Surely you can use the wooden base in another project. Maybe put a round table top and make it a side table.
I think you got it right when you said and I paraphrase "I rushed to get a video ready" problems were sure to follow. Once design was set a combination of changing spindle speed tool size rate of feed and cut depth per pass would have eliminated the tear out issue and undoubtably increased cnc router time substantially.
Of course after the fact cnc could have drilled two holes in mold bottom where each seperate piece was located thereby allowing you to screw into slabs from the bottom securing each seperate piece of the project before cnc cutting and as added benifit hold wood pieces down and in place during casting. Without pouring in layers if your casting table is not cooled invites a loss of epoxy clarity. I still like the finished table especially the care you took with the base and will enter contest. Great project. Ray Stormont
What a beautiful table. Saw the notification but forgot to watch to today.
Absolutely beautiful! Looks bad ass. Great job guys!
Cool looking table, and yes, mistakes always come when you rush it. But it still came out great!
A future project I'd like to see from you guys is a Bourbon Barrel cabinet.
If you want a truly see-through epoxy that is basically like glass, you need to not only use a certain type of epoxy that won't cloud up as it cures, but also put it in a vacuum to pull out ALL the bubbles and seal the wood with a brushing of epoxy
Cut pattern almost all way through so still all attached. Then plane off?
I've seen a similar technique used to create a wood and resin table with sensors on the back of each geometric shape that turn on LEDs when something is on top of that shape. It looks pretty amazing. I like the idea of using LEDs under resin tables in general
Wet sand the resin up to 3000 grit then polish the resin to get the clarity your looking for. Then clear coat it if you still want a clear coat over it.
Everything I've seen you do has turned out beautiful 😍
It looks very slick even with the cloudy resin. Arguably cooler.
I love It.
Happy accidents make for more entertaining videos...how you overcome those mistakes is the best part!
What yellow pencil are you using at 4:30 ?
GL on the table giveaway everyone! If I win, I'm 2 hours north!
Black Forest has the best acrylic system. Watch some of their videos. You just have to look beyond the fact they are Canadian….lol
We like New Sam.... He's a Romantic. 💕
You got a extraordinary result for the effort ❤😂😂😂😂
Totally awesome, John!!!
I think you did well, trying things from other makers doesn't mean they should be a carbon copy. I like the milky middle, I think it turned out awesome
Looks sweet i prefer the frosted resin look of yours over the clear
I honestly like yours better... the milky makes it really lovely
To be honest I love to see wood in its natural form, and even the first geometric cut that you said cut uneven, if I were a client, I would have loved that spoil. It would be mine, unique.
I wonder if using a stainless steel table or a mechanics metal work bench would help you disapate heat on the bottom of your pour. could even mount a fan to blow up at the table so any cold air from the air con will be forced back up.
love it 😍 I would of trimmed a few inches off on the end of the table at 20:00 so you don't see that corner of the wood pieces, but love the rest of it
Final product is sharp! I agree with you that the hazy look of the epoxy looks better than the clear. If I was closer Ild try buying the scrapped base from you cause I got a slab that would make a nice desk with that base!
I really don't even care that it isn't glass clear - that thing still looks SIIIIIIIIICK!
Maybe you could have used the CNC to make the shapes but leave a thin layer of wood that you could work down after your pour
That’s exactly what they did. “Tell you didn’t watch the video without _saying_ you didn’t watch the video.”
Love your work and the content! Great personality to watch
The table is beautiful. I actually like the hazy epoxy. I enjoy working with epoxy as a hobbyist and have had micro-bubbles ruin entire projects so, I’m usually not fond of them :) Black Forest Wood Co. has air conditioning units under their pouring tables. For future builds it might be worth checking into. Heavy D Sparks is auctioning off some industrial air conditioning units, he may have a good deal on something that would work for you.
I like the cloudiness though I'd prefer a galaxyesk swirl on the underside with some magenta purple and gold highlights on a black base. In all honesty I do not like the clear see through resin in tables. The last thing I want to see at the dinner table Is someone's feet.... or worse.
One solution for dealing with bubbles in resin is a pressure chamber. basically crushing the bubbles until they are imperceptible to the eye.
If you are going for a crystal clear pour, it is something worth exploring.
It is what we do, for Miniature casting to avoid bad casting
For a pressure chamber to effectively work, the piece has to be kept under pressure throughout the entire curing process... Do you not see the overall size of what they're working on? They've also used pressure chambers in past videos so not a new concept. Let's use some logic next time
I just build things with Lasers.... Watching these guys is amazing! I wish I could visit them and see this mad science lab of theirs.
Love watching these vids table came out looking really cool
That epoxy is shrinking as it cures, especially with a pour that size. You could have sealed with a spray poly to eliminate bubbles in the top. Seal coating the back side with epoxy before putting in the mold could have also prevented cupping.
at 2 minutes in the video... i'm hoping to see cnc used to cut MOST of the way through the slabs for the design but not entirely, then epoxy poured in. After the epoxy sets plane down the whole length to cut through the remainder, and BOOM, you can see through each gap without worrying about how to get the gaps perfectly spaced.
You really should just watch the whole video first. 🤦🏻♂️
@@vincedibona4687 damn you're SO right! No one comments BEFORE they watch through!
I'm making a pre watch prediction.
The way I think it should be done is make a table a bit thicker than normal.
Leave like 1/4 in or something reasonable left in the depth after doing the CNC for all the geometric shapes.
Then after you pour, CNC the last bit of 1/4 of the wood off the bottom.
I love your videos!!! they are very informative both on what to do and not to do 😂 ive watched about all of your videos. Beautiful table who ever wins it will be a happy person 😎
Please let the b-roll of the finished project run a bit longer without the video/channel links overlaid. Thank you!
I think it looks great John. Nice job!
Anybody else notice John's looking a lot more in-shape recently? 😅😅😅
Looks fantastic!
Cool table! The frosted glass look is cool too. Obviously Total Boat is not the right choice in epoxy. Hopefully you got it free. Superclear epoxy seems to be a better choice, based on some other videos I've seen.
Dammit John again a can't win this!! 🏴🏴🏴 You need another shirt run for dammit Chris this time! New Sam seems be killing it although we both no Jordan wouldn't of made those mistakes!😅 Love the build turned out awesome! Think we need see some milling again saw logs smoke hog's oh and shop chef!! Or 1 slab challenge what and how many things can u make from 1 5ft section of a slab! 👍🏴🤔
can i get the details on the CNC machine you're using? make/model? thanks
Such an awesome table. I think it is better to be different than the one you were modeling it after. Gives it your character.
Imagine what the next one will look like, especially if he is able to take more time. I'm sure this one has taught him a lot
My god... that wood was gorgeous after you did the initial plane. But great table also. But the naked wood is just absolutely gorgeous chocolaty purple color
Quick question for ya John. How flat is "flat" for a wooden table. I used a router sled and somehow ended up with a .65mm cup on a cookie, I'll take more passes later but it got me thinking about flatness. Would appreciate your thoughts. Love the vids!
Putting down a tarp or towel and spraying it by hand so it damp but not soaking/slippery will stop you from kicking up dust with your steps.
Building a sorta cover rig that you can throw a clean tarp over to stop stuff from free drifting into it?
Also part of me would say if you could induce positive pressure in the room (aka more air being pumped in than out) so whenever you open the door the air rush out of the room and will blow out any dust that tries to enter along with you.
Potential hair/beard nets/covers if you are worried hairs will ruin clear stuff.
Ik my ideas arent quick and easy but hope they give you some better ideas.
The patterns were simply done on a cnc using a half inch wide cutter.
Nevermind, I spoke to soon.
Shirt purchased. My Malecki shirt collection is up to 3 now.
So awesome to see a brand new video! I just found you a couple of days ago and have been watching/listening to hours of videos! Just amazing. Thank you. (This is from someone that lives in a suburb of Cleveland 😅)
The trick to these tables is DON'T CNC all the way through when cutting the shapes.
Leave 5mm of material at the bottom and surface it off after the pour has cured
Assuming i had all the tools you do, I'd flatten the top, then CNC the shapes in almost all the way through, leaving them connected on what will be the bottom, then when you put it in the mold, you can pour, then once its dry, you can plane down the bottom below were the tabs hold the shapes.
Hey man your lookin healthy keep it up!!! Ps love your stuff
Fantastic product John. Could you explain to me what you were spraying that you called the Sweet elixir of the gods? And did you buff all the way to the end or sand beyond 500 grit? That was hard work. I’m very impressed
They mill the channels MOST of the way through the slab, so they are still connected and positioned, then do the epoxy pour into the channels, the negative space, and then remove the slab part that was holding the bits together.
Which is exactly what he does here. 🤷🏻♂️
Would have been awesome to lay LED strips along the inside edge of the base frame. Light it up from underneath. To get bubble-free epoxy, you need a degassing vessel. Uses pressure (or rather, lack thereof) to get all of the air out of your resin...
Since the whole mold stuck. You could have used your CNC mill to cut it off the bottom and a track saw to cut the sides off.
Since they have to cut the table to size afterwards anyway, I have often wondered why they just don’t cut the sides of the mold off anyway, just a nip into the wood/resin would still leave excess.