I want to try something like this. I was thinking about doing an acrylic surface or maybe pouring and epoxy surface. Thanks Jason! Your an inspiration to use all.
my workshop is just down the rd from some docks...iv'e put the word out to them that i'll buy their old lifting chains..im just waiting for them to start rolling in.
Great table Jason I love the abstract/ steam punk design. I don't know about your area but here in the states items like this sell very well and in the right market fetch nice price tags! Great work and sea ya Thursday nights.
I've found using vinegar to remove rust is the easiest way just put normally vinegar in a bucket put the chain in leave it overnight when you take it out wash it well with tap water and dry with a compressor It works for taking scale off as well
That's a good tip Daniel. I've used a vinegar bath to remove rust in the past and it does the job well. I tend to make my videos on the hop and don't normally have the time to prep the materials before hand. All told..i love the sound of air tools in the workshop.😁
Seriously, how you think up these projects is genius, but the way you carry out the builds takes a master craftsman.... Another job well done... Two thumbs up... Carry on the great work... And never getting tired of the music.....
thanks Robert..massive compliments there!!! this idea was born of necessity ..needed a table..haven't got the cash to buy one..but i did have some scrap chain :)
omg, that is so damn cool! I think you set a record for tack welds in the process. I've got a 14ft tow chain in my garage just waiting for a project like this.
I'm currently building a stand to hang a log I found in a creek. I'm using an old large linked logging chain. I'm thinking about sandblasting the chain where I'll be welding. Have you thought about blasting your rusted steel instead of wire brushing it? Nice job on the table.
Hi Saint...sand blasting is a great option, sadly i don't have the right gear here at the shop. most of my projects are built in an ad hock fashion..i pick up the material and then just start building. going forward i plan to get a sandblaster (or maybe build one) Thanks for the comment :)
I'm going to attempt making a video of my build. It's a project I started in the fall and stopped because of winter. Doing this project outside. Shed is to small and my home/cabin is not much bigger. If you're curious about the end result I'll send ya notice when it's done. Made a video of the log that's posted. Godspeed brother.
The end result will be this. It's not welded at this point. facebook.com/photo.php?fbid=10212942591113743&set=a.1045585994123.9001.1659853151&type=3&theater
i love it , just one thing could you pull back the camera please so we can see the whole thing as your making it. im guilty of the same with my camera work. i will like im already subscribed. many thanks simon
Certainly better than any store bought table, and you can say 'I made it myself'. I kept watching not knowing what design you had in mind, and you surprised me completely. Is a chain chair next?
Excellent Vid Jase! That damn chain ain't cheap ,,but sometimes at auction I find good long pieces . Planning on using a similar idea in a big plasma cut out clock /sign I'm making ,but just as an outer border. What goes on top ? Plexi ? Do you have a run in setting on that unit ? I have my set fairly high to give me a little softer start with a big gas wash,,but it's a pain in the ass when I do a lot of tacks ,so I adjust it to almost no run in
I love working with chain...but only clean chain..i have the unit set with a 70% start up for .5sec then down slope for .5sec 1 sec post flow..works awesome normally but struggles when earthing is poor (this chain was dirty) however the set adjusts itself when tack welding to suit the material. can't wait to see the clock!
Well i wondered what you were doing mid way lol, Thick its absolutely great Jase bro. AND ALL READERS DON'T FORGET ROB NURDENS CHANNEL 8pm THURSDAY's WITH JASON GUIDO VINCE AND IAN....... Drop by and have a laugh or two.
jason andrews -Thanks for your reply! I make similar items and just started to finally make some money on my items. Thanks for the inspiration! If you ever need anything from here in the states let me know and I'll see what I can do to get it to you.
Hi Joshua, thanks for watching my videos buddy. im glad to see that you are making money from you work..i wish you all the best and if i can ever be of any assistance please feel free to inbox me. why not come join us for our live chat show this thursday at 8pm (uk time) on the Rob Nurden channel?
it's a table? it holds beer. this was one of my 1st videos on youtube and i was still finding my way re how to film, what music i should use. one thing i learned early on was to appreciate other peoples talents and effort..whether they were to my taste or not..i notice that you make amazing creations and you have a great talent..i'm sure one day your channel will get noticed and you will accrue far more views and subscribers than you have.
Интересное исполнение и хорошая работа, автору спасибо!!!
Спасибо, мой друг
I want to try something like this. I was thinking about doing an acrylic surface or maybe pouring and epoxy surface. Thanks Jason! Your an inspiration to use all.
thanks for watching it John...it was one of my favourite builds,,,still using the table in my garden
Cool project and awesome music.
thanks Jason :)
Looks like a lot of work but I bet it's a little therapeutic to do that. I can't wait to make something like that!
Loved making it Mike. go for it!
Glass top look good
Thanks, we used polycarbonate for safety.
Another great build mate.....keep the vids coming...five stars..
Thanks rob. Next one planned and coming soon
Execilliant job on the table Jason, roll on the next project.... Cheers.
Thanks Dave...thinking maybe a couple of chairs to match..just need some more chain.
People put out chain all the time. I usually find it strung across some poles in drives. Just cut it, and roll it up. Help yourself!
hahaha..i've thought about that myself.
jason andrews
yeah you just have to do the picking in out of the way places. Which is where chains normally grow best anyways.
my workshop is just down the rd from some docks...iv'e put the word out to them that i'll buy their old lifting chains..im just waiting for them to start rolling in.
Nice work! Thanks for sharing
thanks for watching.
That thing came out crazy sick.Man you always have some awesome ideas👍.
thanks Ervey
Great table Jason I love the abstract/ steam punk design. I don't know about your area but here in the states items like this sell very well and in the right market fetch nice price tags! Great work and sea ya Thursday nights.
thanks Tim..here the market isnt so good
I've found using vinegar to remove rust is the easiest way just put normally vinegar in a bucket put the chain in leave it overnight when you take it out wash it well with tap water and dry with a compressor It works for taking scale off as well
That's a good tip Daniel. I've used a vinegar bath to remove rust in the past and it does the job well. I tend to make my videos on the hop and don't normally have the time to prep the materials before hand. All told..i love the sound of air tools in the workshop.😁
Seriously, how you think up these projects is genius, but the way you carry out the builds takes a master craftsman.... Another job well done... Two thumbs up... Carry on the great work... And never getting tired of the music.....
thanks Robert..massive compliments there!!! this idea was born of necessity ..needed a table..haven't got the cash to buy one..but i did have some scrap chain :)
Cool man. nice work. Original design.
Thanks buddy
Awesome buddy
omg, that is so damn cool! I think you set a record for tack welds in the process. I've got a 14ft tow chain in my garage just waiting for a project like this.
Thanks for watching and commenting Gordon. It took a lot of tacks for sure...have to make a couple of stools to go with it next. 😁
This project is something I would love to weld up with my everlast. There are a lot of tack welds to be sure but the results are fantastic!
that's badass right there sir
Looking good
Thanks Olivier
I'm currently building a stand to hang a log I found in a creek. I'm using an old large linked logging chain. I'm thinking about sandblasting the chain where I'll be welding. Have you thought about blasting your rusted steel instead of wire brushing it? Nice job on the table.
Hi Saint...sand blasting is a great option, sadly i don't have the right gear here at the shop. most of my projects are built in an ad hock fashion..i pick up the material and then just start building. going forward i plan to get a sandblaster (or maybe build one) Thanks for the comment :)
I'm going to attempt making a video of my build. It's a project I started in the fall and stopped because of winter. Doing this project outside. Shed is to small and my home/cabin is not much bigger. If you're curious about the end result I'll send ya notice when it's done. Made a video of the log that's posted.
Godspeed brother.
The end result will be this. It's not welded at this point.
facebook.com/photo.php?fbid=10212942591113743&set=a.1045585994123.9001.1659853151&type=3&theater
i'm not on fb but i have subbed you so will get the notification. i cant wait :)
Cool idea. How much does it way?
this one weighs about 15kg
that is badass sir
Thanks Christie
Hi. How many volts did you use with micro-wire welding?
i love it ,
just one thing could you pull back the camera please so we can see the whole thing as your making it.
im guilty of the same with my camera work.
i will like im already subscribed.
many thanks
simon
this was very early on in my youtube infancy Simon lol..hopefully my newer videos are a better viewing experience👍 Thanks for your support buddy :)
table lookin nice
cheers Nath...i use it daily in the garden
Certainly better than any store bought table, and you can say 'I made it myself'. I kept watching not knowing what design you had in mind, and you surprised me completely. Is a chain chair next?
Thanks Karen. As soon as I can lay my hands on some suitable chain then chairs are next.
Hi what size mig welding wire please
0.8 mm
nice one Jason 😃
Thanks Hazey
Excellent Vid Jase!
That damn chain ain't cheap ,,but sometimes at auction I find good long pieces .
Planning on using a similar idea in a big plasma cut out clock /sign I'm making ,but just as an outer border.
What goes on top ? Plexi ?
Do you have a run in setting on that unit ?
I have my set fairly high to give me a little softer start with a big gas wash,,but it's a pain in the ass when I do a lot of tacks ,so I adjust it to almost no run in
I love working with chain...but only clean chain..i have the unit set with a 70% start up for .5sec then down slope for .5sec 1 sec post flow..works awesome normally but struggles when earthing is poor (this chain was dirty) however the set adjusts itself when tack welding to suit the material.
can't wait to see the clock!
good job
Thanks buddy
Nice table frame Jason!👍. Now where's the beers mate? :)
sat on the table mate...chillin :)
Oops - my pint slipped through and ended up on the floor...
What a great idea. I hope you don't mind when I steal this idea and use my everlast welder to make one for myself do you?
You go for it buddy...would love to see that everlast being used..you gonna video and share?
Nice build. Jerk sent me
hey thanks lil Dog, subbed back :)
Well i wondered what you were doing mid way lol, Thick its absolutely great Jase bro.
AND ALL READERS DON'T FORGET ROB NURDENS CHANNEL 8pm THURSDAY's WITH JASON GUIDO VINCE AND IAN....... Drop by and have a laugh or two.
Thanks Wayne, ive picked up some more chain to make some stools to go with it.
That should be good to watch..
i'll make sure i get good footage for you
Are you using gas or flux core wire?
Hi Joshu, I'm using gas mate
jason andrews -Thanks for your reply! I make similar items and just started to finally make some money on my items. Thanks for the inspiration!
If you ever need anything from here in the states let me know and I'll see what I can do to get it to you.
Hi Joshua, thanks for watching my videos buddy. im glad to see that you are making money from you work..i wish you all the best and if i can ever be of any assistance please feel free to inbox me. why not come join us for our live chat show this thursday at 8pm (uk time) on the Rob Nurden channel?
Who else can see the little boy with glasses in the center of the table sending a text???
thats probably me taking a pic with my phone Meet lol
The bottom of gas bottle used as template
always a use for scrap Alexander
Seriously ! It doesnt turn , move etc.! Just welded chain....LOL( and that" screaming "for music )
it's a table? it holds beer. this was one of my 1st videos on youtube and i was still finding my way re how to film, what music i should use. one thing i learned early on was to appreciate other peoples talents and effort..whether they were to my taste or not..i notice that you make amazing creations and you have a great talent..i'm sure one day your channel will get noticed and you will accrue far more views and subscribers than you have.
bRILLIANT!
Thank you buddy
سبحان الله وبحمده سبحان الله العظيم
Sorry, not sure what you're saying..but thanks for the comment