@@Adam-ve5gg I’m doing great thank you. I’ve been on a stop gap with modeling lately. But I have a couple models being prepared, so hopefully those will be finished soon. :-)
@@Dmytro_Bricks I mean, it's not bad for anyone if the revell kits are out of stock :D I didn't bring myself (and my crying wallet) to look after the Tamiya kits here in Hungary.
Dude, your models are next level. I don't know anyone near me that is also into miniatures so it's rough to keep the hobby going when you don't know anyone who can appreciate your work.
A few things about using resin for water... First, make sure you seal any of the ground surface you're going to fill with resin to make sure that the foam underneath is protected. Some resins "eat" foam, so you have to be careful about that. Second, resin will usually "creep" up vertical (or angled) surfaces. It forms a meniscus around all parts that are submerged in it. This can ruin the effect of the water and your model in it. Sometimes this effect is on the heavy side, which is difficult to fix, if not impossible. Sometimes it is just a very thin layer of resin (small fillet and a thin film) that creeps up, which can be fixed with some brushed on clear flat or paint effects. Good luck with it. I'm a model train guy, but I'm getting a lot of fantastic paint/weathering tips from you channel... Thanks for sharing!
IMPORTANT: you need to seal the water cavity with something like woodland scenics flex paste. When the 2 part epoxy resin combines, it heats up and will dissolve styrofoam. Nice job on the dio!
That is good advice, ma friend. I still tremble with horror when I think what happened to my underwater P38 lake crash diorama. It was after endless hours of preparing the model and the seabed when the final step - the pour - went south after 5 minutes. The resin heated up so much that the styrofoam dissolved and gassed out, even through the generous layer of plaster and sand that I made the ground out of. The gasses formed very large and ugly bubbles which were caught in the - then already gelatinous- resin, thus being trapped forever. Everything was ruined. It turned out the resin was mislabeled and not up for 5cm thick pours.
Hey Night Shift, I looooove those streak effects. They just add so much age to the model for what seems like such a simple addition. I think it especially works on this model, since it's more of a greasy color than a dusty color. Very well done.
I don't even know how I found your channel - I don't really even care for tanks that much. But I have watched almost all your videos at this point, I love your channel so much. Your models are wonderful, you're so entertaining, and you are just so amazingly talented and lovely!!
Finally it’s Friday! Been looking forward so much! I love your work and this diorama in particular, uncle. I already can’t wait for the next video I asked last week, but I’m asking again: can you build a Strv 103 sometime? It’s one of my favourite tanks, it’s very unique and it would be really cool to see you build one. Massive support from Sweden :)
@@NightShiftScaleModels I’m super happy right now! You have responded to my comment, which I never thought were gonna happen. You inspire me so much! :D I’m thinking of getting the trumpeter Strv, looks good enough to me :)
night shift If got some advise for the resin water for the diorama. there is this guy on youtube and his channel name is plasmo plastic models. There is a video of him making a KV 2 standing left alone in a river. There he also shows tricks to make the water look as realistic as posible
Man it looks better and better every day! I would love to see you do the m41 walker bulldog!!! It’s my favorite tank and if there’s anyone I know that can knock it out of the park….it’s you! You’re the best man keep it up
This is the video I have been waiting for! If I think about WWI tanks, I always think MUD! Despite this, I appreciate your loyalty to the reference material, and I think that the rain marks and streaking look spectacular! This looks great with the rust effects, it will fit in very well with the watery ditch!
Well, wet mud definitely has light reflection depending on the dirt to water ratio. I have some of the AK wet mud and splash mud and both products are nice.
Im still waiting for the day you take on the challenge of a Warhammer 40k model and make it your own in-world, dirty, rusty, busted out, blown out model. I really want to see your take on an out-of-proportion, out-scale model with realistic paint style. Its always a present to see you work on *anything*, and im glad to be able to support you in your work and projects.
I think an interesting diorama could be a burnt out T-55/T-64 from desert storm, popped turret and all all the internal stowage scattered around it, maybe a coalition soldier inspecting it
I think it would be a cool idea if during a future diorama you made some makeshift grave markers (straight sticks or crosses) with custom wood planks or twigs and add a small trinket or two (pocket watch, bible, smoking pipe bandana/handkerchief, etc) with a helmet to top it off. Another idea I had that I thought would be cool is one of the russian tanks that have had it's turret blown off in an ammo cook-off.
Very nice Unc😍 Just looking through my pic collection and came across a Scammell Pioneer, Me wants one n would love to see you make one come to life! TFS, GB :)
Love your stuff, Martin! A thought, dare I....!: more mud/dirt on other horizontal (or close enough) surfaces? Getting into the wrecked tank's history, ue how did the mud get there? kinda stuff. Like on the shelves under the gun shields, and maybe the glacis plate, just a touch? Just a thought; love your modelling Martin, and I'm glad to find your Friday vids, right after work.
I recommend you check out Thalasso Hobbyer for the resin pour. He works with a lot of water resin. Having used it in the past, it can be rather nerve wracking.
I am looking forward to make one like this because I am at the Munich model store and here are a lot of trains, tanks, materials...And also here is the same kind of Tamiya Mk1...P.S. LIKE!!!!!
WW1 modeling is a subject that you seem to have brought to life in the last few episodes.. normally people want sexy modern equipment .. I would like to see more of this subject , what was it like for the men who lived through it frozen in time ( your inspirational photo)yet brought to life in a diorama that you are doing. Nice work
Your model is looking excellent, I truly appreciate the theme and scene you have chosen for this kind of diorama. If I may give a suggestion, you might want to make a desert tan helmet cover made out of linen cloth or gunny for one of the discarded helmets, they were used pretty often back then, since they provided an excellent base for camouflage and dind't reflect light wen they got wet. I know, I know, I'ts really time consuming and completely unnecessary, but it would be an excellent base for unique weathering on worn down cloth soaked up with mud, and it would just give an extra small detail for the diorama. Just a suggestion, but anyways, I truly love this project, and I'm looking forward to seeing it being finished, so keep up the good work.
@@NightShiftScaleModels Well, I think they would give a lovely tone for the scenery, although it is completely understandable if you wouldn't like to bother with them. These are like the rusty gradient on the gun mantlets of the tank: Little, overall insignificant details, which, when inspected closely, give the real charm of the masterpiece. They are a testimony of precision and care. But a strong feeling tells me, you already have way more of those on the diorama than what is required. :)
That looks absolutely awesome. A joy to watch! Excellent tip on poking the half-dried mud effects. Never thought of that :) At 10:30. Can I ask, when you say enamel dust. Is that over an actual product like 'dirt and dust' effects that I see ? It may have been earlier on in the video but there is so many products to keep track of! I'm not too sure which to buy first but like the sound of that oil over enamel dust. Cheers!
Have you ever considered making a Bob Semple tank? They were so successful that not a single unit was destroyed in combat! They also looked very ... unique.
Can I ask questions I had a fire in my condo And a lot of acrylics and other paints have been removed into a storage center Are they going to be ok When I get them back in 5-7 months
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I can’t wait to see more future destroyed models. Maybe a Tiger II diorama with a popped turret. Would love to see your take on it. :-)
Or, more relevant, a T-72 with a popped turret
Hey Modkits, how are you, hope you are doing well, when can we expect new model i really love your models!
@@Adam-ve5gg I’m doing great thank you. I’ve been on a stop gap with modeling lately. But I have a couple models being prepared, so hopefully those will be finished soon. :-)
@@Modkits131 Awsome! Nice to hear that you are well! :)
@@garfieldvevo yeah, I would also rather prefer a modern tank instead.
I can't believe the Chi-Ri was 3 years ago already...Time flies with exellent content !
Thank you uncle for taking that honest work opportunity! 🥺❤ and can't wait for how bonkers the finished thing will look!
This series is amazing , I look forward to every one with anticipation.
Excellent Night Shift, keep the good work up.
I'm stoked for this bad boi, might buy one myself if I find one :D great work!
I’ll get one and paint it as a space marine landraider.
Takom kits are 20€ cheaper than official stuff anyways
I am now in Munich, there are two of those bad guys here, a lot of Rewell models that are out of stock...
@@Dmytro_Bricks I mean, it's not bad for anyone if the revell kits are out of stock :D I didn't bring myself (and my crying wallet) to look after the Tamiya kits here in Hungary.
Thank you , Uncle Martin .
🐺
The tank already looked awesome, with the weathering techniques it's even better!
As soon as I see your notice I start looking forward to getting time to watch and hearing, "mu friend" I love it.😂
7:09 Ah yes, my favorite weathering material is real dirt from Nightshift's garden.
Best of luck for the resin pour. Fantastic build and painting job so far.
I love the track doing the “O”
Really nice attention to detail
Love the content man, hope to see a a7v in the lineup
I love your method of painting the exhaust, it always looks so cool!
This is the best thing right after my last final exam
Dude, your models are next level. I don't know anyone near me that is also into miniatures so it's rough to keep the hobby going when you don't know anyone who can appreciate your work.
You should add water puddles in grooves on the top of the tank
A few things about using resin for water... First, make sure you seal any of the ground surface you're going to fill with resin to make sure that the foam underneath is protected. Some resins "eat" foam, so you have to be careful about that. Second, resin will usually "creep" up vertical (or angled) surfaces. It forms a meniscus around all parts that are submerged in it. This can ruin the effect of the water and your model in it. Sometimes this effect is on the heavy side, which is difficult to fix, if not impossible. Sometimes it is just a very thin layer of resin (small fillet and a thin film) that creeps up, which can be fixed with some brushed on clear flat or paint effects. Good luck with it.
I'm a model train guy, but I'm getting a lot of fantastic paint/weathering tips from you channel... Thanks for sharing!
IMPORTANT: you need to seal the water cavity with something like woodland scenics flex paste. When the 2 part epoxy resin combines, it heats up and will dissolve styrofoam.
Nice job on the dio!
That is good advice, ma friend. I still tremble with horror when I think what happened to my underwater P38 lake crash diorama. It was after endless hours of preparing the model and the seabed when the final step - the pour - went south after 5 minutes. The resin heated up so much that the styrofoam dissolved and gassed out, even through the generous layer of plaster and sand that I made the ground out of. The gasses formed very large and ugly bubbles which were caught in the - then already gelatinous- resin, thus being trapped forever. Everything was ruined. It turned out the resin was mislabeled and not up for 5cm thick pours.
Hey Night Shift, I looooove those streak effects. They just add so much age to the model for what seems like such a simple addition. I think it especially works on this model, since it's more of a greasy color than a dusty color. Very well done.
Really testing my reflexes. Never clicked so quickly. (Actually maybe second time)
I don't even know how I found your channel - I don't really even care for tanks that much. But I have watched almost all your videos at this point, I love your channel so much. Your models are wonderful, you're so entertaining, and you are just so amazingly talented and lovely!!
Finally it’s Friday! Been looking forward so much! I love your work and this diorama in particular, uncle. I already can’t wait for the next video
I asked last week, but I’m asking again: can you build a Strv 103 sometime? It’s one of my favourite tanks, it’s very unique and it would be really cool to see you build one.
Massive support from Sweden :)
Thanks! If only there was a good kit of thee Strv :) I hope Takom might release it in the future
@@NightShiftScaleModels I’m super happy right now! You have responded to my comment, which I never thought were gonna happen. You inspire me so much! :D
I’m thinking of getting the trumpeter Strv, looks good enough to me :)
I did get the 1:72 Trumpeter kit. It's... Ok. Not bad. The tracks are awful though. :)
@@andli okie thanks, I’m thinking about the one in 1:35, do you think it’s as good/bad? :)
@@wi-fi3231 actually don't know, sorry :) best of luck though!
Amazing work, this has been my favourite of your builds. Looking forward to seeing more.
night shift If got some advise for the resin water for the diorama. there is this guy on youtube and his channel name is plasmo plastic models. There is a video of him making a KV 2 standing left alone in a river. There he also shows tricks to make the water look as realistic as posible
Very attractive vignette so far. Fingers crossed for the muddy water but I have confidence you've pulled it off and it looks appropriately mucky :)
The quality of your work is absolutely outstanding. This is a real art form. I like many others look forward to your releases.
i'm so excited for that next episode! This project has been so cool to watch
Wooah I watched the whole thing up to now in one sitting. Now we wait for the dirty resin-water outcome.My fingers are crossed.
Great looking result. I find myself leaning more and more on oils, as well. They blend, fade, and feather with minimal effort.
Very nice job on the diorama.
Man it looks better and better every day! I would love to see you do the m41 walker bulldog!!! It’s my favorite tank and if there’s anyone I know that can knock it out of the park….it’s you! You’re the best man keep it up
Another fascinating chapter, Martin. Thanks again for sharing and have a great weekend.
The best project in your channel for today! Can’t wait for the next episodes.
This is the video I have been waiting for! If I think about WWI tanks, I always think MUD! Despite this, I appreciate your loyalty to the reference material, and I think that the rain marks and streaking look spectacular! This looks great with the rust effects, it will fit in very well with the watery ditch!
Great progress again. I can't wait to see the finished Diorama!
Awesome as usual and so many tips 😀.
Only thing I would tone down is the exhaust pipe wrapping 🤔.
I would pour s small amount of resin just around the tank first where it connects so that sir from the tank doesn't lead to a ton of bubbles
You’re amazing man! Can’t wait for next episode already! Thanks for all your hard work making your videos, there’s so much work in every video. 👍
Yay! Every friday feels like christmas!
Put this on a flat canvas it would be called a work of art...it IS a true work of art
Nice looking tank… looking forward to next week
Outstanding details as usual...Truly fantastic!
Weathering excellent as always. Bravo
Wish u best with the water, hopefully see more of experimenting and doing what you haven't done yet, or long time. Looks soo dope tho
Love your work, these models are so nice to look at even through a screen lol
I just found your channel while looking for some weathering info, amazing knowledge here, I'm gonna use it for sure!:))
Well, wet mud definitely has light reflection depending on the dirt to water ratio. I have some of the AK wet mud and splash mud and both products are nice.
Lovely!
Lol I would have called it finished but it looks much better amazing job man keep up the work
Another helpful video, Uncle--good work!
Im still waiting for the day you take on the challenge of a Warhammer 40k model and make it your own in-world, dirty, rusty, busted out, blown out model. I really want to see your take on an out-of-proportion, out-scale model with realistic paint style. Its always a present to see you work on *anything*, and im glad to be able to support you in your work and projects.
I think an interesting diorama could be a burnt out T-55/T-64 from desert storm, popped turret and all all the internal stowage scattered around it, maybe a coalition soldier inspecting it
Loving this project....
Good luck, can't wait to see the final product!
I do have to say, i think with such a wide tank, seeing faded soldiers boot mudprints after scavenging the tank would be awesome
Yesssss just in time for my lunch break.
dude : doesn't look like much? maaaaan it looks supreme.
Happy Friday Uncle Nightshift!
Incredible work as always!
5:01 Mind Blowing Realism!
I think it would be a cool idea if during a future diorama you made some makeshift grave markers (straight sticks or crosses) with custom wood planks or twigs and add a small trinket or two (pocket watch, bible, smoking pipe bandana/handkerchief, etc) with a helmet to top it off.
Another idea I had that I thought would be cool is one of the russian tanks that have had it's turret blown off in an ammo cook-off.
Very nice Unc😍 Just looking through my pic collection and came across a Scammell Pioneer, Me wants one n would love to see you make one come to life! TFS, GB :)
I love your work it is so cool how you can do all these types of weathering and make your model look awesome. I how to reach this level one day
You got me into models thank you!!!!
Best part of Friday.
Always enjoyable. Not a fan of epoxy. I can use effectively if need be, but not a fan.
Love your stuff, Martin! A thought, dare I....!: more mud/dirt on other horizontal (or close enough) surfaces? Getting into the wrecked tank's history, ue how did the mud get there? kinda stuff. Like on the shelves under the gun shields, and maybe the glacis plate, just a touch? Just a thought; love your modelling Martin, and I'm glad to find your Friday vids, right after work.
That awesome mate can’t wait for the next one!
I recommend you check out Thalasso Hobbyer for the resin pour. He works with a lot of water resin. Having used it in the past, it can be rather nerve wracking.
Sans mots , sinon absolument EXTRAORDINAIRE.
I am looking forward to make one like this because I am at the Munich model store and here are a lot of trains, tanks, materials...And also here is the same kind of Tamiya Mk1...P.S. LIKE!!!!!
Woo can't wait
WW1 modeling is a subject that you seem to have brought to life in the last few episodes.. normally people want sexy modern equipment .. I would like to see more of this subject , what was it like for the men who lived through it frozen in time ( your inspirational photo)yet brought to life in a diorama that you are doing.
Nice work
i think the tank would have a bit of grime right?
I wonder if a few drop of flat vms in the freeze could cut the gloss. without messing with it glue-ness
Very nice!!
Actual tankers: oh no! RUST....
Modelers: oh YES... rust.
Its amazing how a bunch of little details reach that level of realistic
Yeeee exactly
Fantastic work 👌
Another GREAT vid.................... 👍👍👍
Your model is looking excellent, I truly appreciate the theme and scene you have chosen for this kind of diorama. If I may give a suggestion, you might want to make a desert tan helmet cover made out of linen cloth or gunny for one of the discarded helmets, they were used pretty often back then, since they provided an excellent base for camouflage and dind't reflect light wen they got wet. I know, I know, I'ts really time consuming and completely unnecessary, but it would be an excellent base for unique weathering on worn down cloth soaked up with mud, and it would just give an extra small detail for the diorama. Just a suggestion, but anyways, I truly love this project, and I'm looking forward to seeing it being finished, so keep up the good work.
Tamiya actually included these in the kit as well! I should've thought of that!
@@NightShiftScaleModels Well, I think they would give a lovely tone for the scenery, although it is completely understandable if you wouldn't like to bother with them. These are like the rusty gradient on the gun mantlets of the tank: Little, overall insignificant details, which, when inspected closely, give the real charm of the masterpiece. They are a testimony of precision and care. But a strong feeling tells me, you already have way more of those on the diorama than what is required. :)
You should do something "on time" like fully destroyed russian column or something. Good job. Love your skills.
Great work on this
Love it ! Cant wait for next video 😍
Is this art? Definitely
That looks absolutely awesome. A joy to watch!
Excellent tip on poking the half-dried mud effects. Never thought of that :)
At 10:30. Can I ask, when you say enamel dust. Is that over an actual product like 'dirt and dust' effects that I see ?
It may have been earlier on in the video but there is so many products to keep track of!
I'm not too sure which to buy first but like the sound of that oil over enamel dust.
Cheers!
Have you ever considered making a Bob Semple tank? They were so successful that not a single unit was destroyed in combat! They also looked very ... unique.
Amazing work as always!
Ingenious!
Beautiful work!
Reading about oil chests from the period. Letting oil and grease run out on the ground is where it's at.
Really nice work!
Outstanding video.
😎outstanding my friend
Great. Please can you tell me wish brushes you are using?
Absolutely amazing … 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👍🏻
How's the leg NS?
Top tutorial, awesome vids.
What about diorama of crashed ww1 plane?
Great video as always, keep it up, great and relaxing stuff
Can I ask questions
I had a fire in my condo
And a lot of acrylics and other paints have been removed into a storage center
Are they going to be ok
When I get them back in 5-7 months
6:20 Why were the Wilder paints discontinued? Does anyone know?
Is white spirit being used to blend the rust effects?