I can’t thank you anough for this video , I was at a loss with my bike … took it to a shop they had it for a month and couldn’t figure out why it would wanna die after it warmed up , I was chasing fuel before I bring it to them and told them that … found out they did the same and after two months just wanted it out of there shop and for me to pay them for there time … got the bike back did some research on crank shaft positions sensors and then saw this video and lone behold I checked the codes and had one for the cps… thank you again Rocco ur the man
Happy to help. Any questions just ask I love to hear when this helps people out. Thank you for watching and all your support Lil. Ride safe and have a great day.
Brother Rocco... You're the best... But how do I clear the existing codes with that red key that flashes for 4 seconds while the ignition is on ? I have a 2005 15th anniversary Fatboy and I can't get that key to go away. Ty in advance, my good man. Oh by the way I did put primary fluid, in the primary and it shifting smooth as silk thank you for your advice. Your the best.
Hey Racco, I have a 2015 sportster 883 iron and it does not have the clicker on the back of the dial. My 2008 sportster nightster did have the clicker. Did Harley Davidson change that up on the 2015 model? Thanks.
@@TwoWheelRocco I replaced a bad ignition switch on a 2005 1200xl and now the speedo is completely non functional but the red security light stays on. Bike fires right up... is this a security feature? Maybe the bike thinks it's being hot wired? 🤷♂️ That's what brought me here.
@@TwoWheelRocco disconnected and re-checked all connections and fuses. Still no speedo, no blinkers or brake lights. Running lights (head/directional/tail all on and work fine though. There must be a fuse in missing or this is a security lock out. Security fob double click blinks lights though so I know that works. Odometer only comes on when I press reset, but won't stay on after starting and won't go into diagnostic mode. I'm stumped. 🤦♂️
Happy to help. Any questions just ask. Thank you for watching and your sub Lee. Ride safe and have a great day. Very rewarding to repair your motorcycle.
I got “no rsp” for the first set of the P codes and U1064 for the SP codes. 2005 sportster won’t turn on or crank. Hit the start button and nothing happens. Replaced the off/run switch and start button. Also replaced the starter relay fuse
Bad positive cable, Test by running power to your starter. They are known to have bad end lead at starter from battery. Let us know how this works out. Thank you for your Sub Sam. Any questions just ask. Ride Safe and have a great day.
Hey Rocco dom again, talked to you in your primary chain adjustment video. It happened to be that my final drive belt was loose because a adjuster broke and loosened the axle any way. So today I was riding into work and glanced down and noticed my engine and battery light were both on. I happened to know this trick and got the same code you showed in this video P0562: battery/ecu low voltage. I cleared the code hoping it might be a fluke but on my way home it the lights came on again. Any idea what that might be? I’m thinking it might be the voltage regulator or maybe the stator? Do you happen to have any videos showing how to replace either one? Don’t really want to have the stealership take care of it! Thanks for the help!
Found you me regulator video. I went out just to check out the connections it looks like I only have one. Also ran the diagnostic again got the same code but also got p/n 32152-07A. Pretty sure it’s a part number but can’t find a part number matching that. Any idea what that might be?
hello friend I have a 2009 injection sportster, I consumed the full tank only 35 miles ago, I changed oxygen sensors and sensor map, where could start to revive thanks.
My 2014 harley iron 883 does not have a reset button on the speedo. I have a check engine light on and have no idea how to identify the code or codes. Any help would much appreciated.
www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791 Hope this helps...Ride Safe and have a great day..Let us know how it works out.
Hey bud , I do actually have a question and appreciate your help. I just got a brand new 2018 streetglide. I started it today and the check engine light came on and is staying on. What do you think the problem might be. I don’t know how to check codes. Appreciate your help. Thanks
.Some of these new bikes are temperamental...I hate to say this Dealer..Let me know how this works out..Ride Safe and have a great day...PS.2018 Milwaukee eight Street Glide is a Great Ride with Cobra exhaust..Check it out ...ruclips.net/video/dCPwadZ9cV0/видео.html
Rocco,, i have problem with my 2011 Sportster 48. The neutral light won't lit up when i turn on the key, and the engine won't start when i press start button. But if i press the clutch lever and then press start button, it's work and engine start correctly. Could you tell me what is wrong with that? Tks Rocco.
@@TwoWheelRocco Have any idea how long you must run the bike in order to induce the codes ? I'd like to assure my self of any historic codes and account for any new on my Xr.
I have a 2015 Harley 72 and with 4,000 miles on it and the engine light is on and there is no reset button on speedo to check and can't find any forms on it any help would be appreciated
Thanks I saw that you sewed somebody diagram from the Harley forum the hit the trip button first then on switch with the key to access the codes and it worked for the 2015 it was my O2 sensor so it turns on immediately as soon as I start to bike but now I know what it is
I can't yet. Im still having issues with my voltpack. Not quite sure if the trouble is due to the cheap batterie or a bad voltpack. I have a 2008 sportster nightster 1200 and the dealer is asking me 180$ for it
I have codes after installing a brake light with built in turn signals. The codes are for the rear turn signals, running and brake light, even though everything is hooked up, connected, and everything works correctly (both turn signals, running light, & brake light). Any suggestions? Should I clear the codes and see if they come back?
Happy to help. Are these OEM Harley Davidson parts? Clear the codes. Let us know how it works out. Thank you for watching and your sub Jay. Ride safe and have a great day.
Harley code. DTC B1006 is displayed when accessory line voltage is greater than 16.0 volts for longer than 5 seconds. DTC B1007 is displayed when ignition line voltage is greater than 16.0 volts for longer than 5 seconds. Check battery leads that they are tight. Do you have any accessories on this bike? If so check those connections. voltage regulator probably it is faulty, check also the Battery ground cable. Test battery charging system. ruclips.net/video/20smKwo7aIY/видео.html. Let us know how this works out. And what the bike is charging at. Thank you for your Sub Sal.. Ride Safe and have a great day.
I have an 02 road glide and while driving down the freeway the check eng. light came on for maybe 15, 20 seconds and turns off it has happened on a couple occasions and also not sure if related but when starting the bike the check engine goes on and of fairly quick but after it is started for 30 seconds it come on again for 15 or so seconds what can this be
@@efrenhurtado5077 Hope this helps. www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791. Let us know how this works out.
Happy to help with the Wide Glide. It's on the tank console. I'll send you a video on that information. Thank you for watching and all your support Joe. Ride safe and have a great day. www.google.com/search?client=safari&rls=en&q=2001+wide+Glide+check+codes&ie=UTF-8&oe=UTF-8
I saw on RUclips a sportster that shows RPM on the digital display where the time is displayed. Is that possible ? If it is can you show us? I don’t want to spend hundreds of dollars to Harley for something I might have already. Just needs adjusting.
That's a dealer Speedo and they do cost about 400 or 500 bucks. They are very popular on the big V twins and kings and soft tails. What year is your Sportster do you have? Thank you for watching and your sub Moto Davison. Ride safe and have a great day.
Hi, i got a problem with my xr1200, all the symbols check enjine, fuel and battery turn on while riding, but its running well. Any suggestions for me to inspect?
Happy to help. I would check the codes. And then take it from there. Let us know how this works out. Thank you for watching and your sub Adnan. Ride safe and have a great day. I wish I had more for you. www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791. Hope this helps.
Hey my check engine light keeps coming on and then my battery gets drained.I took it to the Harley mechanics and changed the rectifier,but the check engine light still comes on and my battery keeps getting drained.What should I do?
Did any body check the code that it is showing. And you stated Harley mechanic, You need to check what code is stored. Let me know the code that was saved. Also what year and miles?
Two Wheel Rocco I had my rectifier changed as well advised by the guys at the Harley service and don’t know why the problem is still going on..any help?
Did you have the Harley Davidson dealer install your rectifier? Sounds like it is bad. PO562 low voltage to your PCM. I would bring it back to dealer if they did the work. Let us know how this works out. repairpal.com/obd-ii-code-p0562
Happy to help. Does it do it this at the same time every time you ride? Thank you for watching and all your support Mickey. I'm leaning towards your Ignition module.. If it happens consistently as it warms up. That's my best guess. Let us know how that works out.
@@TwoWheelRocco yes every time. The plugs are all carbon up. I had ngk I put the old Harley Davidson plugs bag in seem to run better but still wanted to die when it got warm
These Harleys do not like NGK plugs that's just my experience they like copper core plugs Champion 8HC 810 plug. They love AutoZone $3 a plug. I would be concerned with what jets are you running? Did it do this since you owned it or is this something that just started?
Hi Rocco. My sportster 1200 custom. When i stop at trafic light or junction my bike engine tune is low. I check error code , it b2271 ( low voltage ). What should i do ?
Happy to help, what year Sportster. Sounds like your battery is failing. Thank you for watching and your sub Aldrin.. Ride safe and have a great day. www.hdforums.com/forum/touring-models/1126236-help-bcm-code-b2271-battery-suddenly-died.html. let us know how that works out. How old is your battery?
You might have to bring it to the dealer to have them plug it in to scanner. And go a little deeper. Sorry I can't help but that's what I would do. Let us know how it works out. How old is your battery?
@@jimscycleandautotn8508 take a look at this video and yes it is most likely IAC. ruclips.net/video/hzxxamT5HL8/видео.html. Let us know how it works out. Thank you for watching and your sub Jim. Ride safe and have a great day.
Happy to help. This bike was purchased out of the country. I believe its origins was Canada so that's kilometers. Thank you for watching and all your support Adrian. Ride safe and have a great day. That was an all model sportster 883.
Happy to help. I sent you a link. I hope that helpswww.hdforums.com/forum/ignition-tuner-ecm-fuel-injection/462956-bike-won-t-start-code-p0374.html. Thank you for watching and your support George. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco yes thank you , I measured the resistance, it was 607 ohms looked good connector looked good cleaned and reinstalled the crank position sensor .
@@georgegould667 Sorry that's all I got. Check the rest of the sensors connections. When you do figure it out. Let us know please. Ride safe and have a great day. Sorry I couldn't help.
@@TwoWheelRocco oh you have been a big help , I thank you Rocco , in my mind I think it is CPS and still looking for more evidence , the ignition module under the seat on 2006 1200C I cannot find much information on it , that being said there is probably not a lot of trouble with the ignition module .
The yellow light is on as you're checking for codes the red light is a real engine code on your motorcycle. Thank you for watching and your sub Bob. Let us know how it works out. Ride safe and have a great day.
@@bobmiles4587 What do you think the yellow light means. I never seen one. Except when I'm checking for codes, let me know when you find out thanks a lot for your comment Ride Safe and have a great day.
Just trying to help. Thank you for watching and your sub David. Flashing codes works on all motorcycles. Ride safe and have a great day. But Harleys are problematic.
5 years later this video is still helping people out (at least me), thank you.
Happy to help. Any questions just ask. Thank you for watching and all your support Fluffy Bunny. Ride safe and have a great day.
Thanks Rocco, that's a great help. I've had intermittent problems on my Dyna with the engine light coming on. I'll try this out.
Let me know how this works out...Ride Safe..
I was able to locate an electrical problem by checking codes as you demonstrated. Thanks Two Wheel Rocco
Happy to Help my Friend....Ride Safe..
First 10 seconds of this video resolved my issue. Thank you tremendously!
Happy to help. Thank you for watching and all your support huedue. Ride safe and have a great day.
@@TwoWheelRocco you too brother
Thank you so much for this video! Super helpful!
Happy to Help, Any questions just ask. Thank you for your Sub. Ride Safe and have a Great Day.
Well done Rocco! Thanks!
This was really useful , was able to clear the codes and problem was resolved ... saved a trip to the dealer 😁
Happy to help,Thank you for watching and you sub Vivek, Ride Safe and have a great day.
Thanks Rocco, your teaching/explaining is easy and #1. Really appreciate your videos totally the Best!😎🦅
Happy to help. Any questions just ask thank you for watching and all your kind words Dino. Ride safe and have a great day.
I can’t thank you anough for this video , I was at a loss with my bike … took it to a shop they had it for a month and couldn’t figure out why it would wanna die after it warmed up , I was chasing fuel before I bring it to them and told them that … found out they did the same and after two months just wanted it out of there shop and for me to pay them for there time … got the bike back did some research on crank shaft positions sensors and then saw this video and lone behold I checked the codes and had one for the cps… thank you again Rocco ur the man
Happy to help. Any questions just ask I love to hear when this helps people out. Thank you for watching and all your support Lil. Ride safe and have a great day.
Thank You! This Was Super
Happy to Help, Any questions just ask. Thank you for your Sub Harley. Ride Safe and have a great day.
Great video, thanks man
Happy to help. Any questions just ask. Thank you for watching and your sub Derek. Ride Safe and have a great day.
Thanks cleared up a problem I thought I had. I replaced a dead battery and never cleared old code. Thanks
Happy that it helped. Ride safe and have a great day. Thank you for your Sub.
Oh man, thanks! this helped a lot on my 09 Sporty
Happy to help. Any questions just ask thank you for watching and all your support. Ride safe and have a great day.
This video really helpfull 🙏🙏
Happy to help. Any questions just ask. Thank you for watching and all your support raptor. Ride safe and have a great day.
6 years on just helped me 👌
Happy to help. Any questions just ask thank you for watching and all your support David. ride safe and have a great day.
Brother Rocco... You're the best...
But how do I clear the existing codes with that red key that flashes for 4 seconds while the ignition is on ?
I have a 2005 15th anniversary Fatboy and I can't get that key to go away. Ty in advance, my good man.
Oh by the way I did put primary fluid, in the primary and it shifting smooth as silk thank you for your advice. Your the best.
does a code still come up on your cluster? and what code?
Awesome thank you you saved me the shop fees thank you again
Happy to help any questions just ask thank you for watching and oh you support Matt. Ride safe and have a great day. Love those sportsters.
Excellent video, clear explanation smd therefore very helpfulm thsnk yoa
Happy to help. Any questions just ask. Thank you for watching and all your support Geoff. Ride safe and have a great day.
Hey Racco,
I have a 2015 sportster 883 iron and it does not have the clicker on the back of the dial. My 2008 sportster nightster did have the clicker. Did Harley Davidson change that up on the 2015 model?
Thanks.
www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791
Hope this helps. Ride safe and have a great day.
Short sweet and to the point. Thank you
Happy to help. Any questions just ask. Thank you for watching and your sub Tickettothemoon. Ride safe and have a great day.
@@TwoWheelRocco I replaced a bad ignition switch on a 2005 1200xl and now the speedo is completely non functional but the red security light stays on. Bike fires right up... is this a security feature? Maybe the bike thinks it's being hot wired? 🤷♂️
That's what brought me here.
Disconnect the battery. Reconnect and see if it changes let us know. look at the fuse box for the cluster Speedo. being bad.
@@TwoWheelRocco disconnected and re-checked all connections and fuses. Still no speedo, no blinkers or brake lights. Running lights (head/directional/tail all on and work fine though. There must be a fuse in missing or this is a security lock out. Security fob double click blinks lights though so I know that works. Odometer only comes on when I press reset, but won't stay on after starting and won't go into diagnostic mode. I'm stumped. 🤦♂️
@@FreeAdvice4All Sorry that's all I got, I would bring it to the dealer and have them plug it in. Let us know what it ends up to be, sorry about that.
Rocco 😏😏😏 Luv it !
Ty Ty Ty. i had no clue.
Happy to help. Any questions just ask. Thank you for watching and your sub Lee. Ride safe and have a great day. Very rewarding to repair your motorcycle.
I got “no rsp” for the first set of the P codes and U1064 for the SP codes. 2005 sportster won’t turn on or crank. Hit the start button and nothing happens. Replaced the off/run switch and start button. Also replaced the starter relay fuse
Bad positive cable, Test by running power to your starter. They are known to have bad end lead at starter from battery. Let us know how this works out. Thank you for your Sub Sam. Any questions just ask. Ride Safe and have a great day.
Hey Rocco dom again, talked to you in your primary chain adjustment video. It happened to be that my final drive belt was loose because a adjuster broke and loosened the axle any way. So today I was riding into work and glanced down and noticed my engine and battery light were both on. I happened to know this trick and got the same code you showed in this video P0562: battery/ecu low voltage. I cleared the code hoping it might be a fluke but on my way home it the lights came on again. Any idea what that might be? I’m thinking it might be the voltage regulator or maybe the stator? Do you happen to have any videos showing how to replace either one? Don’t really want to have the stealership take care of it! Thanks for the help!
Found you me regulator video. I went out just to check out the connections it looks like I only have one. Also ran the diagnostic again got the same code but also got p/n 32152-07A. Pretty sure it’s a part number but can’t find a part number matching that. Any idea what that might be?
ruclips.net/video/zSOYLiCkw74/видео.html Replace Voltage Regulator..Hope this helps. Let me know this works out.
hello friend I have a 2009 injection sportster, I consumed the full tank only 35 miles ago, I changed oxygen sensors and sensor map, where could start to revive thanks.
Happy to help..Ride Safe and have a great day.
My 2014 harley iron 883 does not have a reset button on the speedo. I have a check engine light on and have no idea how to identify the code or codes. Any help would much appreciated.
www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791
Hope this helps...Ride Safe and have a great day..Let us know how it works out.
Just bought my 2017 Harley has almost 6000 miles is it common for engine light to come on for oil change
That does not sound right that light come on for oil change..Let me know how that works out.
Hey bud , I do actually have a question and appreciate your help. I just got a brand new 2018 streetglide. I started it today and the check engine light came on and is staying on. What do you think the problem might be. I don’t know how to check codes. Appreciate your help. Thanks
.Some of these new bikes are temperamental...I hate to say this Dealer..Let me know how this works out..Ride Safe and have a great day...PS.2018 Milwaukee eight Street Glide is a Great Ride with Cobra exhaust..Check it out ...ruclips.net/video/dCPwadZ9cV0/видео.html
Ughhhh. Thanks a lot. That really pisses me off exspecially with 800 miles. Thanks though. And I will keep you updated. Thanks a lot.
Rocco,, i have problem with my 2011 Sportster 48. The neutral light won't lit up when i turn on the key, and the engine won't start when i press start button. But if i press the clutch lever and then press start button, it's work and engine start correctly. Could you tell me what is wrong with that? Tks Rocco.
It sounds like the bike is not in neutral. Do you have it in gear?
Thanks man
Happy to help..Ride Safe and have a great day.
THANK YOU!
Happy to help. Any questions just ask. Thank you for watching and you sub Dean. Greeting from Florida. Ride safe and have a great day.
Thanks, Rocco!
Happy to help. Any questions just ask. Thank you for watching and your sub Carl. Ride safe and have a great day.
Shout out Rocco, appreciate the walk through.
Happy to Help, Any questions just ask. Thank you for your Sub Justin. Ride Safe and have a Great Day.
@@TwoWheelRocco Have any idea how long you must run the bike in order to induce the codes ? I'd like to assure my self of any historic codes and account for any new on my Xr.
@@DiogenesOfDelaware New code can show up as soon as you start the bike. I understand your question. Thank you for watching.
I have a 2015 Harley 72 and with 4,000 miles on it and the engine light is on and there is no reset button on speedo to check and can't find any forms on it any help would be appreciated
Thanks I saw that you sewed somebody diagram from the Harley forum the hit the trip button first then on switch with the key to access the codes and it worked for the 2015 it was my O2 sensor so it turns on immediately as soon as I start to bike but now I know what it is
Happy all went well, Ride Safe and have a great day. @@brianking2798
What was the first year for Harleys with a check engine light?
Don't Know..
Hi Rocco. Can you tell me why my sportster starts running when I only press the fuel pump switch. She starts automatically without crancking it
Sounds like starter relay bad...Let me know how this works out.
Two Wheel Rocco finally it was a faulty starter switch
Happy to hear you are back on the road....Ride Safe and have a great day.
I can't yet. Im still having issues with my voltpack. Not quite sure if the trouble is due to the cheap batterie or a bad voltpack. I have a 2008 sportster nightster 1200 and the dealer is asking me 180$ for it
Let me know how it works out.
I have codes after installing a brake light with built in turn signals. The codes are for the rear turn signals, running and brake light, even though everything is hooked up, connected, and everything works correctly (both turn signals, running light, & brake light). Any suggestions? Should I clear the codes and see if they come back?
Happy to help. Are these OEM Harley Davidson parts? Clear the codes. Let us know how it works out. Thank you for watching and your sub Jay. Ride safe and have a great day.
@@TwoWheelRocco not Harley parts but sounds good, thanks!
Hey Rocco my 2008 harley davidson sportster 1200 is showing code b1006 any ideas
Harley code. DTC B1006 is displayed when accessory line voltage is greater than 16.0 volts for longer than 5 seconds. DTC B1007 is displayed when ignition line voltage is greater than 16.0 volts for longer than 5 seconds.
Check battery leads that they are tight. Do you have any accessories on this bike? If so check those connections. voltage regulator probably it is faulty, check also the Battery ground cable. Test battery charging system. ruclips.net/video/20smKwo7aIY/видео.html. Let us know how this works out. And what the bike is charging at. Thank you for your Sub Sal.. Ride Safe and have a great day.
Rocco checked battery was the negative cable was loose no more code u saved me some money ..THANKS
@@baltazar9865 Happy to read all is well.. Ride Safe and have a great day.
Have a 2000 wide glide engine goes on and off I can't get it to run diagnostic just get 01-10 clear
Is this a carbureted bike?
Let me know if you have any questions.
I have an 02 road glide and while driving down the freeway the check eng. light came on for maybe 15, 20 seconds and turns off it has happened on a couple occasions and also not sure if related but when starting the bike the check engine goes on and of fairly quick but after it is started for 30 seconds it come on again for 15 or so seconds what can this be
Thank my friend
Happy to help, Thank you for watching and your Sub enrique. Ride Safe and have a great day.
Hi ¡¡¡¡ Rocco for Sportster Super Low 2013 this tutorial work it ??? please
How can I help?
@@TwoWheelRocco For Check Engine Light Code and Clearing, I need to know if works for Sportster SuperLow 2013
@@efrenhurtado5077 Hope this helps. www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791. Let us know how this works out.
what year is your sportster? I have a 1998 1200 and this will not work for me
Will not work on 1998 XL Sportster...Sorry.
Thanks
Happy to help. Any questions just ask. Thank you for watching and all your support Rugershooter. Ride safe and have a great day.
Having trouble clearing the codes. When clear pops up and I click it the code still pops up?
What is the code?
Will this work on 2001 fxDWG?
Happy to help with the Wide Glide. It's on the tank console. I'll send you a video on that information. Thank you for watching and all your support Joe. Ride safe and have a great day. www.google.com/search?client=safari&rls=en&q=2001+wide+Glide+check+codes&ie=UTF-8&oe=UTF-8
I saw on RUclips a sportster that shows RPM on the digital display where the time is displayed. Is that possible ? If it is can you show us? I don’t want to spend hundreds of dollars to Harley for something I might have already. Just needs adjusting.
That's a dealer Speedo and they do cost about 400 or 500 bucks. They are very popular on the big V twins and kings and soft tails. What year is your Sportster do you have? Thank you for watching and your sub Moto Davison. Ride safe and have a great day.
@@TwoWheelRocco I have the original speedo. It’s a 2012. Your welcome
My pleasure.
Hi, i got a problem with my xr1200, all the symbols check enjine, fuel and battery turn on while riding, but its running well. Any suggestions for me to inspect?
Happy to help. I would check the codes. And then take it from there. Let us know how this works out. Thank you for watching and your sub Adnan. Ride safe and have a great day. I wish I had more for you. www.hdforums.com/how-tos/a/harley-davidson-sportster-how-to-obtain-diagnostic-trouble-codes-412791. Hope this helps.
Its work but the fuel symbol still on, i thing sensor problem. Anyway tqvm for ur lesson.👍🏻
@@adnanyusof6 Ride for a little and see if tank sensor starts to work.
@@TwoWheelRocco yesterday i ride about 70km, fuel light still on.
@@adnanyusof6 problem lies in the fuel pump in the tank needs to be serviced.
Yes it is
Ride Safe...And Ride Safe..
Hey my check engine light keeps coming on and then my battery gets drained.I took it to the Harley mechanics and changed the rectifier,but the check engine light still comes on and my battery keeps getting drained.What should I do?
Did any body check the code that it is showing. And you stated Harley mechanic, You need to check what code is stored. Let me know the code that was saved. Also what year and miles?
Two Wheel Rocco hey It’s a 2011 sportster 8077 miles and the code which appears is PO562
Two Wheel Rocco I had my rectifier changed as well advised by the guys at the Harley service and don’t know why the problem is still going on..any help?
Did you have the Harley Davidson dealer install your rectifier? Sounds like it is bad. PO562 low voltage to your PCM. I would bring it back to dealer if they did the work. Let us know how this works out. repairpal.com/obd-ii-code-p0562
Two Wheel Rocco also my battery is 9 years old I think that might be the problem,and yes the dealership installed the rectifier
Mine doesn’t have a reset button
Hey Rocco. My 06 1200. Dies when it heats up I've changed everything but spark plug wires. Any ideas? Thank you!
Happy to help. Does it do it this at the same time every time you ride? Thank you for watching and all your support Mickey. I'm leaning towards your Ignition module.. If it happens consistently as it warms up. That's my best guess. Let us know how that works out.
@@TwoWheelRocco yes every time. The plugs are all carbon up. I had ngk I put the old Harley Davidson plugs bag in seem to run better but still wanted to die when it got warm
These Harleys do not like NGK plugs that's just my experience they like copper core plugs Champion 8HC 810 plug. They love AutoZone $3 a plug. I would be concerned with what jets are you running? Did it do this since you owned it or is this something that just started?
@@TwoWheelRocco my brother told me to get the ngk plugs out. I never changed the jets just cleaned them
Would the ignition module throw any codes? And is it easy to swap out?
Can you tell me why my key symbol stays on
that would be security system. Does it stay on all the time. Do you have and key fob for your alarm.
Hi Rocco. My sportster 1200 custom. When i stop at trafic light or junction my bike engine tune is low. I check error code , it b2271 ( low voltage ). What should i do ?
Happy to help, what year Sportster. Sounds like your battery is failing. Thank you for watching and your sub Aldrin.. Ride safe and have a great day. www.hdforums.com/forum/touring-models/1126236-help-bcm-code-b2271-battery-suddenly-died.html. let us know how that works out. How old is your battery?
My sportster recon from Japan. A Year build 2009. I bought 2015
You might have to bring it to the dealer to have them plug it in to scanner. And go a little deeper. Sorry I can't help but that's what I would do. Let us know how it works out. How old is your battery?
I bought my battery 2 year ago & keep it at my garage. I'm using the battery 1 year ago.
I just doing the code error. Now I saw ECM ( N ) & BCM (N)
High startup idle even when warm ? Iac sticking ?
Do t see any codes, throttle cables seem to be good , adjusted correctly
@@jimscycleandautotn8508 take a look at this video and yes it is most likely IAC. ruclips.net/video/hzxxamT5HL8/видео.html. Let us know how it works out. Thank you for watching and your sub Jim. Ride safe and have a great day.
@@TwoWheelRocco thanks brother , have a blessed week
Happy to help. Let us know how this works out.
@@TwoWheelRocco musta been a gremlin passin through lol
Is that showing too speed 220 what kind of harley you got bro I wish mine said that and it's a 1200 custom sheesh 😢
Happy to help. This bike was purchased out of the country. I believe its origins was Canada so that's kilometers. Thank you for watching and all your support Adrian. Ride safe and have a great day. That was an all model sportster 883.
@@TwoWheelRocco thank you for the helpful video.
@@TwoWheelRocco thank you for the helpful video.
How do I find the list of codes and meaning?
Write the code down, Google it and you'll have your information, Hope this helps. Ride safe. Have a great day.
I have code PO374 , do you know what that code means on my 2006 sportster 1200 C ?
Happy to help. I sent you a link. I hope that helpswww.hdforums.com/forum/ignition-tuner-ecm-fuel-injection/462956-bike-won-t-start-code-p0374.html. Thank you for watching and your support George. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco thank you
@@TwoWheelRocco yes thank you , I measured the resistance, it was 607 ohms looked good connector looked good cleaned and reinstalled the crank position sensor .
@@georgegould667 Sorry that's all I got. Check the rest of the sensors connections. When you do figure it out. Let us know please. Ride safe and have a great day. Sorry I couldn't help.
@@TwoWheelRocco oh you have been a big help , I thank you Rocco , in my mind I think it is CPS and still looking for more evidence , the ignition module under the seat on 2006 1200C I cannot find much information on it , that being said there is probably not a lot of trouble with the ignition module .
tanque cacahuate: 3.3 Gals=12.5litros
Como faço na 883 ano 2020?
Happy to help. Any questions just ask. Thank you for watching and all your support Colsas. Ride safe and have a great day.
what was the problem on your Bike?did you fixed it ?
Front O2 sensor. Code gone. What code are getting? Thank you for Watching.
@@TwoWheelRocco the same code as you in your video
@@TwoWheelRocco 0562
@@TwoWheelRocco I've look the EFI code table and it says low voltage battery
@@TwoWheelRocco my code is P0562
whats a yellow engine light mean
The yellow light is on as you're checking for codes the red light is a real engine code on your motorcycle. Thank you for watching and your sub Bob. Let us know how it works out. Ride safe and have a great day.
@@TwoWheelRocco wrong , but thanks for the reply
@@bobmiles4587 What do you think the yellow light means. I never seen one. Except when I'm checking for codes, let me know when you find out thanks a lot for your comment Ride Safe and have a great day.
@@bobmiles4587 www.hdforums.com/forum/sportster-models/1219794-engine-light-stays-on.html. Hope this helps. Red is oil, yellow is a code present.
Why would you have to do that oh I know why because Harley's are JUNK
Just trying to help. Thank you for watching and your sub David. Flashing codes works on all motorcycles. Ride safe and have a great day. But Harleys are problematic.
Well done Rocco! Thanks!
Well done Rocco! Thanks!
Happy to Help..Ride Safe..