@@Rust_Rust_RustI'd rather work honestly, I couldn't sit around for 8 days at home anyways. But that's what happens when you help run a company. People nowadays know nothing about work. 😁
Look. Any bricklayer can do a nice job but speed is key when you're working on price. Bricklaying is all about the amount you're laying and on jobs where quality matters more than quantity, the customer has to be willing to pay a lot more. Quality has taken a back seat for the most part because everyone undercuts everyone and it's been this way for years. I don't understand why you're trying to encourage him to do better. If you knew anything about bricklaying you'd understand that he's top tier. So stop being so patronising.
35 years exp ..I'm no Mason, just a wood butcher, however .. DON'T TOUCH THE LINE! Js ... And please feel free to correct me ...don't move the line until the run is done. Right? (Right) 🔥
@@jontullett9068 in the USA, a bricklayer installs, brick and concrete blocks, and the like. A mason is quite a bit more, he does stone, usually he also does fireplaces, not every bricklayer can do this things with finess! Jim
@Jim Pie Mason is much different than a bricklayer. Not better but different. I've been a Mason for 30 years. Stone, stucco, tile, fireplaces, brick buildings, chimneys, block and all of the layout.
@@brikkijim One of my friends was a mason for 30 years before he retired. He could do it all, his work spoke for itself. However, the one thing he couldn’t do was touch the tools and brick, after he retired because if he did and was caught he would loose his $450 month pension and insurance if they caught him. He worked hard and his brick hands showed it. God bless you!
Never seen one either, but it looks too flimsy to me. I like the idea of the spring, but if it's not binding to the block you can't pull it very tight. Of you look at the line, it's easy to loose.
That's how we do in Guam, USA and Micronesia and it's the best. Pour concrete from the top, including the beams and roof later. The place where Category 5 Hurricane 🌀 is very common.
I was a Mason tender In the union we built schools and this is how every Mason worked.those block weight alot that's for sure. We used 12 in block alot of the time those suckers are 55 lb a block . Number 7 rebar everyother cell so much grout lol .
I've laid tens of thousands of 12 inch block, and have never laid or seen anyone lay one like that, a solid sure but not a 12, much less an 8. Furthermore I've never seen a 12 that heavy, even 16x16 column blocks are 50 lbs or less. 55 lbs is way too much for me, what were they solid split face, or fluted?
I used to labour to two old men in 60s an they still could lay 5 inch solids an 9inch booster s FRM tarmac .them old brickies showed a young lad how to always have a bucket an thick bristles brush to clean shovels an mixer no brick in mixer.
The only thing I see that's a little off. Is the chicken leg was put on the last block that was installed and you can't pull? That line tightening to keep a belly out of it. Yet chicken line need to be 22 and a 1/2 blocks behind the last one installed on both ends. Or you need to use flying block instead of chicken leg. That way you can get a good pool get to stretch out of that line specially If it's a new ball align you're using. Now if I could i'd like to just throw out a hint to all people who install block. Picture that block is a big brick and then lay the block that way one-handed center Webb. Keep your hand away from the line and. Put another 50 to 75 block in the wall everyday that adds up if you're getting paid by the block And if you are you just gotta raise. Not bad I decided everything look pretty smooth. I would hire this Mason. Good luck everybody goodbye.
I always wondered why do cinder blocks had holes and later in time I found out that cinder blocks where made specifically for cement to be poured in and capped off. My neighbors cinder block wall was not filled and the ”masons” said there was no need because it will not be barring any structural weight and after 3 years one good earthquake of a 4.4 brought the row of blocks down like dominos.
Block homes are never filled 100 percent. That's too expensive. The corners are filled and other middle sections with rebar. There are houses that have poured concrete walls, so 100% concrete and rebar, but no blocks.
Ppl think this is easy as pie. Masonry isn’t easy. Which is why every masonry company is always hiring. Which is why I love being in this industry. Not many can do it, most just talk about it on RUclips comment section. Lol. This guy has a lot to learn, but good for him, seems dedicated. It will pay off for him. He’s on his way. You gotta do it everyday to master every technique. Only comes with experience. Beauty about this trade too is not many young ppl getting into it. Certainly not for everyone.
The second video title pointing out laying “heavy / hollow” blocks. Us Yanks simply call them blocks / cement blocks / CMU’s and anyone that’s grabbed them knows they’re not light… but it’s understandable for a “Bricky” to mention the weight. However, those are certainly rough textured block. If you tried to hand float those you’d be there all day! JS
Grab that block by the wide middle piece set it down with ease, face both sides clean mud after its faced then lay the next block same way ... 25 year veteran right here... me.
Работа красивая, но не понятно зачем в пустотах арматура, если бы она была в углах здания то понятно, но и там нужен не прут, а каркас, если пустоты будут заливать то здание станет холоднее и опять таки нужен каркас, а не прут по центру пустоты, он там не работает.
А можно так - Проклятые капиталисты вместе с продажными учёными и инженерами придумывают всё более изощрённые технические приспособления и способы эксплуатации рабочего класса. :-)
Here in The United States in The State of Florida most of our homes are built out of these blocks, and then what we call “Stucco” finished to add texture. I think hideous. However, due to hurricanes this is the safest way to do things. We also refer to these as “cinderblocks”. However, I love seeing England and The Other Marvelous Nations of Great Britain still using brick as they always have 🧱. It’s a true form of art, and in my opinion the most stunningly allure of them all to this day. Here in The U.S. one single traditional “red brick” at the hardware store’s roughly about $2.50-$3.00 USD in 2023. I think that’s why we don’t see entire homes or building built in them anymore. In closing, keep up the fantastic work. P.S. my home’s brick trimmed from the ground to about quarter way up. Wish the entire place was 😎 Subscribed
My first home in Glenview, was brick half way up, and the cedar siding was attached to the studs. We cut away the attachment trim and we used a brick that was very close to the old one, and we bricked to the top. There was a limestone sill, which we took and reset it. took 2 days, 2 bricklayers for 8 hours and 3 bricklayers for 8 hours. It cost me $800 in 1980. The cost for doing it with aluminum siding was about $1200. It was Saturday one week and the next Saturday. He and a friend were the helpers on the job, mixing the mortar, handling all the brick(2500) and moving the scaffold. There was 2 large windows in the front, the brick we used was a beige color, we did a large triangular diamond with black brick, this completed the stunning brick addition.
I'm curious about tolerances because here in Australia the latest brick & block work I've been seeing on new builds is of extremely poor quality. Large gaps right down to one block sitting on top of another with all the mortar squeezed out to nothing. Alot is rendered over or coated with membrane finishes so it's hidden but peoples are paying big $$ for complete shite. So sad to see 😞
I've had 8 days off... Now all my videos are about construction. It's a sign it's time to go back to work.
Definitely in the same boat as you!
8 days damn, lucky fker.
Lol
@@mrsmith2904 if you dont even get 8 days you are doing slave labor 😂
@@Rust_Rust_RustI'd rather work honestly, I couldn't sit around for 8 days at home anyways. But that's what happens when you help run a company. People nowadays know nothing about work. 😁
Look like you're doing a good job mate but you have some tough critics out there, carry on, excellence is a journey, perfection is the destination.
Kyuh 😀 🐵 the first thing we had to 😂about
A flower for your kind words, my friend
✨🌺✨
Hes not to bad here. I said not to bad it could be better.
Look. Any bricklayer can do a nice job but speed is key when you're working on price. Bricklaying is all about the amount you're laying and on jobs where quality matters more than quantity, the customer has to be willing to pay a lot more. Quality has taken a back seat for the most part because everyone undercuts everyone and it's been this way for years.
I don't understand why you're trying to encourage him to do better. If you knew anything about bricklaying you'd understand that he's top tier. So stop being so patronising.
@@craigread5603I don't think Charlie is worried about what people think. He makes so much money I doubt he's time to read comments 😂
The line is looser than a streetwalkers snatch.
Taught to not let go of the trowel and to not touch the line as much, mason in Colorado
Exactly..you were taught Right..
And you still can’t build crap.
Same
You are correct. My old boss was taught by the Sicilians and that was a big NO touching the line
35 years exp ..I'm no Mason, just a wood butcher, however .. DON'T TOUCH THE LINE! Js ... And please feel free to correct me ...don't move the line until the run is done. Right? (Right) 🔥
Finally, someone that is doing the mortar bed properly! Great job, you’re a real mason! My hats off to you!
No we are bricklayers, whos mason
@@jontullett9068 in the USA, a bricklayer installs, brick and concrete blocks, and the like. A mason is quite a bit more, he does stone, usually he also does fireplaces, not every bricklayer can do this things with finess! Jim
It gets filled with concrete dude. More concrete equals a stronger wall. Mortar is only to hold the blocks until it’s poured.
@Jim Pie Mason is much different than a bricklayer. Not better but different. I've been a Mason for 30 years. Stone, stucco, tile, fireplaces, brick buildings, chimneys, block and all of the layout.
@@brikkijim One of my friends was a mason for 30 years before he retired. He could do it all, his work spoke for itself. However, the one thing he couldn’t do was touch the tools and brick, after he retired because if he did and was caught he would loose his $450 month pension and insurance if they caught him. He worked hard and his brick hands showed it. God bless you!
Supposed lay those with 1 hand Charlie!
Never seen a line dog look like that. Looks better than the normal ones
What's wrong with a little block of wood?
Dori block by BT engineering aus
Never seen one either, but it looks too flimsy to me. I like the idea of the spring, but if it's not binding to the block you can't pull it very tight. Of you look at the line, it's easy to loose.
Thanks turbosloth
That's how we do in Guam, USA and Micronesia and it's the best. Pour concrete from the top, including the beams and roof later. The place where Category 5 Hurricane 🌀 is very common.
Where in Guam par?
Keren orang2 di luar sana mah pengerjaannya kerapian yang di utamakan,🎉🎉🎉❤
That wall has a distinct bow in it. Your midline support is pulling the line off the straight position.
Yeah you can see it kicking out or in after the support or profile.
Work for 40 years never seen nobody work like that
I was a Mason tender In the union we built schools and this is how every Mason worked.those block weight alot that's for sure. We used 12 in block alot of the time those suckers are 55 lb a block . Number 7 rebar everyother cell so much grout lol .
I've laid tens of thousands of 12 inch block, and have never laid or seen anyone lay one like that, a solid sure but not a 12, much less an 8. Furthermore I've never seen a 12 that heavy, even 16x16 column blocks are 50 lbs or less. 55 lbs is way too much for me, what were they solid split face, or fluted?
One-hand that block!
Hand covered in muck 😅
I used to labour to two old men in 60s an they still could lay 5 inch solids an 9inch booster s FRM tarmac .them old brickies showed a young lad how to always have a bucket an thick bristles brush to clean shovels an mixer no brick in mixer.
Вообще пролив раствора полностью препятствует проникновения холода жары !
Арматура же есть, заливать будут.
Why don’t you butter the block your laying so you doing have a big hole in your joint 😅
Отличный каменщик, раствор во всех стыках, кладка - монолит. Русские так не могут строить.
Брехней не занимайся Саша,как раз русские и так делают ,если им всё предоставляют .И это возможно русский работает, только за границей.😊😊😊
The only thing I see that's a little off. Is the chicken leg was put on the last block that was installed and you can't pull? That line tightening to keep a belly out of it.
Yet chicken line need to be 22 and a 1/2 blocks behind the last one installed on both ends.
Or you need to use flying block instead of chicken leg.
That way you can get a good pool get to stretch out of that line specially If it's a new ball align you're using. Now if I could i'd like to just throw out a hint to all people who install block.
Picture that block is a big brick and then lay the block that way one-handed center Webb.
Keep your hand away from the line and.
Put another 50 to 75 block in the wall everyday that adds up if you're getting paid by the block And if you are you just gotta raise.
Not bad I decided everything look pretty smooth. I would hire this Mason.
Good luck everybody goodbye.
Lines on the wrong side also.
that looks like it will be strong 👍
Suppose to have washouts on first course. Clean out all your fallen mud, cover washouts, fill with concrete.
Great job Charlie
Per continuare ad alzare i ferri devi legarli con il filo di ferro uno accanto all'altro
Muito bom e criativo
I always wondered why do cinder blocks had holes and later in time I found out that cinder blocks where made specifically for cement to be poured in and capped off.
My neighbors cinder block wall was not filled and the ”masons” said there was no need because it will not be barring any structural weight and after 3 years one good earthquake of a 4.4 brought the row of blocks down like dominos.
Block homes are never filled 100 percent. That's too expensive. The corners are filled and other middle sections with rebar. There are houses that have poured concrete walls, so 100% concrete and rebar, but no blocks.
Great work lad. Making trady’s cool one block at a time.
Ppl think this is easy as pie. Masonry isn’t easy. Which is why every masonry company is always hiring. Which is why I love being in this industry. Not many can do it, most just talk about it on RUclips comment section. Lol. This guy has a lot to learn, but good for him, seems dedicated. It will pay off for him. He’s on his way. You gotta do it everyday to master every technique. Only comes with experience. Beauty about this trade too is not many young ppl getting into it. Certainly not for everyone.
POR FIN UN ALBAÑIL PROFESIONAL QUE ECHA PASTA EN MEDIO
In the states we lay em one handed. Keep up the work
Very glad to see you placing mortar in the cross members
Atleast he's got Rebar in it and will concrete fill them. I just rebuilt a 5 ft Block Wall because the last guy didnt.
Alright definitely a block layer from up North we don't lay as good as break down south but keep the good work up watch them head joints
Great block laying 👌
But who does your concrete footings??
great job
The second video title pointing out laying “heavy / hollow” blocks. Us Yanks simply call them blocks / cement blocks / CMU’s and anyone that’s grabbed them knows they’re not light… but it’s understandable for a “Bricky” to mention the weight. However, those are certainly rough textured block. If you tried to hand float those you’d be there all day! JS
Lol. Those are Haydite's!!!
You Sally's! Come lay some 12'' concrete blocks with us!😂
Woah that is a lot of work
Nice back spread👍
Grab that block by the wide middle piece set it down with ease, face both sides clean mud after its faced then lay the next block same way ... 25 year veteran right here... me.
His back hand spread 👀 pretty good I seen he had to cross Web it thicken that spread up a little more I like the spead lead and line dog 🐩 🤟🏻🤟🏻🤟🏻🤘🤘👀👍
Try laying 9x4's in Northern Ireland. We rarely use breeze blocks. Also in footings- foundations we use 12x4's which are heavier again
Wow 10.000 years ago they did this with 10 ton blocks
Now you overseas know how to lay some good structural bricks, but we are blocklaying machines in the USA.
i am from India. your work is awesome
😊kyuh 13th August is 7 and I will need
Такие блоки кладут дырами вниз. С обратной стороны ровная постель под раствор.
Нет, такого не бывает! Все делают тяп-ляп, а этот умник делает качественно! Такого быть не может! А я понял - он себе строит! 😂😂😂
Buen trabajo felicidades el material que usa para poner los bloques es fino
Buen trabajo saludos desde Tijuana ✌️👌👍🐓
They look like lightweight block 👍🧱✌
Haydites
Работа красивая, но не понятно зачем в пустотах арматура, если бы она была в углах здания то понятно, но и там нужен не прут, а каркас, если пустоты будут заливать то здание станет холоднее и опять таки нужен каркас, а не прут по центру пустоты, он там не работает.
Вот что значит развитие! Всё для людей, всё продумано для более удобной, правильной и приятной работы
А можно так - Проклятые капиталисты вместе с продажными учёными и инженерами придумывают всё более изощрённые технические приспособления и способы эксплуатации рабочего класса. :-)
Your definitely one of the better brickies on tik tok!.
We would use a nail way back when, some good kit about nowadays fella.
La junta está mal tomada
Se coloca mezcla en la cara que da al interior y en exterior.
Así no ingresa humedad
Mexicano chingon !!
El maestro que le enseño, no tenia buenas practicas
My dad laid block for over 60 years. He made it look easy.
Perfetto 📐, la malta non stenderla tutta ma al momento della posa del blocco. ( si asciuga )
You need to learn,you never touch the line when you put the block , always remember
Isn't the line should be on the back the brick to allow for more freedom? And when i was laying bricks, we would run like 6 lines. Anyway continue 😮
Каждый сходит с ума по своему
When you build a cement brick foundation. Why not fill the entire wall with mortar while it's being laid? Wouldn't that make it last forever??
Cheap modern US slap stick construction won’t permit that. 😀
You're doing good work out there and I love it. Please, can I come and join you out there? I am Mason / Tiler
Here in The United States in The State of Florida most of our homes are built out of these blocks, and then what we call “Stucco” finished to add texture. I think hideous. However, due to hurricanes this is the safest way to do things. We also refer to these as “cinderblocks”. However, I love seeing England and The Other Marvelous Nations of Great Britain still using brick as they always have 🧱. It’s a true form of art, and in my opinion the most stunningly allure of them all to this day. Here in The U.S. one single traditional “red brick” at the hardware store’s roughly about $2.50-$3.00 USD in 2023. I think that’s why we don’t see entire homes or building built in them anymore. In closing, keep up the fantastic work. P.S. my home’s brick trimmed from the ground to about quarter way up. Wish the entire place was 😎 Subscribed
My first home in Glenview, was brick half way up, and the cedar siding was attached to the studs. We cut away the attachment trim and we used a brick that was very close to the old one, and we bricked to the top. There was a limestone sill, which we took and reset it. took 2 days, 2 bricklayers for 8 hours and 3 bricklayers for 8 hours. It cost me $800 in 1980. The cost for doing it with aluminum siding was about $1200. It was Saturday one week and the next Saturday. He and a friend were the helpers on the job, mixing the mortar, handling all the brick(2500) and moving the scaffold. There was 2 large windows in the front, the brick we used was a beige color, we did a large triangular diamond with black brick, this completed the stunning brick addition.
I'm curious about tolerances because here in Australia the latest brick & block work I've been seeing on new builds is of extremely poor quality.
Large gaps right down to one block sitting on top of another with all the mortar squeezed out to nothing.
Alot is rendered over or coated with membrane finishes so it's hidden but peoples are paying big $$ for complete shite. So sad to see 😞
Looks like there's gonna be weak spots,like where there's hardly any morter!!! Let's get it done right not half assed!!!😮😮😮
You must have been trying to hit a hight because them bed joints are tiny as hell.. I get it the struggle is real Mason brother
Chingona herramienta
could you build a extension with those blocks or is it illegal?
That's called Quetta bond you fill all.the voids and rebar with wet concrete at the end. Strangest bond in the world for hurricane proof houses😂😅
Bootery in motion.
The plural for block is block just like the plural for deer is deer, not deers.
Thanks for getting that middle rib, the young fellas usually rush by that one.
This s make me wanna go build a random wall. Or try to. Try to in my case, but this is awesome
Way too much mud Charlie! Gonna fill the wall with mortar!
Yes. That is great. But what these steel bars for ? Why not kept together into a concrete colom?
Guys I think this do deserve 1 million wait no I don’t think I know
Excelente trabalho
When you lay block never touch the line
You end up slowing the other masons on the wall
Everyone talks about the line but gauging of your last block is more of a worry. 😂
Ont a beau dire: c'est un métier : bravo
Покажите это видео турецким застройщикам 😂
I always did Doubles..
Outside string would be easier
Con i ferri all interno non può crollare addosso il muro se c'è un terremoto
Line way to slack! 😉
Of course what country this shallow and good blocks
Put line on back of block
100 percent right twice as hard the paying customer get line in on his side
Wow amazing
Got to be a quicker way to put the joint in.
I find that there's a waste of cement while building hollow bricks wall. Seen this in Saudi Arabia.
the right tool does half the work
Tighten that line up
Si esos huecos estuvieran llenos si creo que sería una buena construcción
NUNCA HE ENTENDIDO POR QUE SE PONEN VARILLAS EN EL EJE NEUTRO DEL MURO WTF... dónde quedó la física
Rough bricklayers, you would never get a job in Australia
Y las varillas quedan así o después la rellenas con concreto?
We have cender blocks at home and this is the first time I have seen anyone actually use them with morter in a permanent way
Regular size regular weight blocks in Canada. 8" are incredibly light compared to 12".
I do commercial Masonry work her in The states and you are right and they are nothing compared to 12” split face
@@Joe-ce8jo couldn’t imagine those 🤯. At least £5 per block??
you need to learn how stay off the line
And they look like lightweights
What's up with that line dog
Керамзитоблок вроде, такой крупнопустотный используют для сараев
Average bricklayer gets paid $25 an hour… I hope this guy isn’t getting paid $25 an hour…it wouldn’t be worth all the stress!
lol average in Ontario Canada is 40 plus 25 lol who works for that
Great job
Super!👏👏👏👏👏👍🧱🏤🏣🏢
Jolie travail 👌