█ How to make Pioneer IP-BUS to 3.5 mm Aux Input Cable █
HTML-код
- Опубликовано: 22 фев 2015
- How to make Pioneer IP-BUS to 3.5 mm Aux Input Cable adaptor for Pioneer DEH-P7700MP DEH-P6700MP DEH-P5800MP 8600R
▼How to setup/program the Aux input for a Pioneer ▼
• Video 
Наука
You went the hard way about it bro. Best thing to use is the system panel plugs for your normal ATX computer case. ie: hdd led, power led, reset/power button etc. Just cut them off and slide them on. No need to cut, tape and modify the plug etc.
Thank you for providing this information, really helped me a lot.
It works.Thanks.Volume is OK.
Thanks! It worked and perfect!
berry good thank s man
Thank you.superrrrr
Super video
Can you use the standard white / red cables that you have attached to the unit? And connect them to a mini-jack cable?
Nicee very much
Thanks
What did use for the aux cable
Headphones or a actually aux cord
What did you use as the plug for the cd player
thank s
Plaese help me to connect aux in my toyota car sterio (panasonic)
Muy Bueno me funcionó excelente
Cómo conectaste los cables de auxiliar
what is that small black socket jest near the bus port, when I connect my android phone to aux input, sound is very low I can only hear small sound after reaching maximum volume .. what maybe the cause of my system plz help
Hard way but good job
Thanks a lot! I have a small issue, that i have low volume :/
Hola saludos desde argentina,quería saber cómo conectas el auxiliar 3.5 a los demás cables, muchas gracias
Jald se jald bataiye
its worked thanks for the video... btw volume is too low
E Bn eka wada karanawada
Do 6800 IB work? No sound is calculated.
Hey man i bought ip bus - aux cable on amazon by pioneer and than i connected it nothing happened. is there some way of activation or something? avc hrz08 model
ip bus is for cd changers. you have to put it on cd and play a silent track while playing music through the aux
No, CD Changer won't appear unless there's a digital device live on the bus. AUX is analog. You have to go into 'initial setting' mode and enable AUX on the radio. There are instructions to do this in the manual. Check both the owners manual and the initial setup manual.
Turn off your HU.. Press and hold the power/source knob until the menu comes on. Scroll through until you see AUX 1 turn it on Scroll one more to AUX 2 and turn it on. Power on the HU and figure out which one is aux 1 and aux 2 one will be playing music from your phone. Repeat steps and turn off whichever aux your not using. All pioneers ive ever used aux1 is the ipod input on the front and aux2 is the IP bus
Is the level not too tall? Because it is the normal aux deforms.
other dan going all true this you can use an old pc tower it got cables use the usb 1 that gose to the pc board much easy than doing all this :P
IP-Bus and Aux Pinout NOT in the link
Saludos y si fundiona el auxiliar
You can buy this cable on ebay for 2.99 delivered.
4usd and In Argentina you have to pay double for shipping.
can anybody tell me why the lights on my Super Tuner won't work but you can put a CD in it and the CD plays
display issue ull have to get the display replaced
i wonder whats the jack next to the ip bus jack is for
Andre Samuel it is for the wired remote which is a Mic for using the auto eq and auto time alignment depending on what model u have.
Michael Mayse can it be used as a AUX input
Free dix resivor se oux input kaise nikalen
Song Name Please
IP-Bus and Aux Pinout in this link. don't work
didn't work at all... only used the right side because I only have one speaker (home computer tower project and a surround sound speaker) and I didn't get any sound at all
PLEASE SHOW PINOUT PLEASE
I was going to, but I found a real one on ebay for 7 bucks free shipping.
could've done without music
got no audio, touched the 3.5mm plug tip and my stereo freaked out and shut off
KAT Bradley cugy.6 b 7i boa taoj 0uk. gfh 2
rede de.
I have jvc car tape
plz tell aux input for this
send wtsup no
só gostaria de acertar a hora
That's simple if u have the board like mine but it'll work try holding the disp button or press it there are ways to do this it has to turn off the display after that press and hold the volume button it will open some settings that does not open normally find clock set and just set the time
Музыку в студию
tank you ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۴۸]
I'm making my Pkhshm
Идея хорошая,но реализация-колхоз!
No se ingles, no entendí ni verga..
Al final el escribe "Es muy importante programar la entrada auxiliar ya que no funcionará, con el siguiente video aprenda a programar una entrada auxiliar"
Only a fucking tweaker would go through all this shit instead of buying the cable on ebay for less than $5 shipped. Lmfao
ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۴۸]
I'm making my Pkhshm
ALIREZA, [۱۴.۰۷.۱۶ ۱۸:۵۰]
The socket is not available in Iran
Yuck you not tern on
no entendi nada de tu huevada de video
Al final el escribe "Es muy importante programar la entrada auxiliar ya que no funcionará, con el siguiente video aprenda a programar una entrada auxiliar"
terrible video, most of it of the back of your hand, lots of time spent on showing no new information, and overexposed lighting.
Muy Bueno me funcionó excelente
Cómo conectaste los cables del auxiliar