2003 Toyota Tacoma Spark Plug Replacement 1995-2004

Поделиться
HTML-код
  • Опубликовано: 6 май 2022
  • 2003 Toyota Tacoma Spark Plug Replacement 3.4l. Step by Step Guide on replacing spark plugs on your toyota tacoma 3.4l. Best Spark Plug for your Toyota Tacoma. How to Check the spark plug gap and what the gap should be. Torque spec for spark plugs on 3.4l toyota. How to replace spark plugs on a toyota tacoma step by step. How to change the spark plugs on a toyota 3.4l v6 engine.
    My Instagram Page - / backyard_chevy
    Backyard Chevy is a participant in the amazon affiliates program. As an Amazon Associate I earn from qualifying purchases
    I assume no liability for anything you choose to do to your own car. Due to factors beyond my control, All Repairs you perform to your car are performed at your own risk. I assume no liability for property damage or injury incurred as a result of any information contained in this video. Use this information at your own risk.
  • Авто/МотоАвто/Мото

Комментарии • 47

  • @kainoa003
    @kainoa003 5 месяцев назад +4

    Great Step by Step Instructions! Most DIY videos leave out a step or two assuming you know what to do, but you go the extra step by showing us everything, really appreciate it!

  • @dellalderman8011
    @dellalderman8011 24 дня назад

    Wow. That engine is so clean!! Mine has 336,000 plus miles on it. Valve covers leaking oil and covered with mud and dust. Great video by the way.

  • @frogfoot198
    @frogfoot198 Год назад +6

    Your camera work was outstanding. Easy to see, no hands or head in the way, easy to follow your directions. Thanks.

  • @heatblur1
    @heatblur1 5 месяцев назад +1

    Great video! Direct and to the point... No fluff or loud obnoxious intro. Excellent camera work...Thank you.

  • @dozerboy67
    @dozerboy67 11 месяцев назад +3

    Outstanding presentation sir, I thought for sure I was screwed when it came to working on my 2000 Toyota 4runner, even though it’s 23 years old! After watching your video, I’m quite certain I’ll wax that pup! Thank you for a clear and concise explanation of the process! 🙏💪👊🤙

  • @catering1988
    @catering1988 Год назад +5

    Amazing tutorial, very detailed, helps out a ton. Keep up the great work. Thank you

  • @josefrancisco-uu2xi
    @josefrancisco-uu2xi 9 месяцев назад

    Best video presentation from A - Z. Thank you.

  • @warm4023
    @warm4023 Год назад +3

    I had a cylinder 6 misfire in my 04 Tacoma. Great video! Detailing and explaining all parts of the job. Also thumbs up on the next video to change the wires!
    Thank You!

    • @backyardchevy328
      @backyardchevy328  Год назад

      Thank you🙂 so glad to hear u had a misfire and dont still have it👍

    • @bfields1448
      @bfields1448 9 месяцев назад

      ​@@backyardchevy328I just started getting a misfire on 3 and 6 cylinders and I checked them and they're getting fire, changed plugs and coil and still misfire idk what it is

  • @AT-qu1ek
    @AT-qu1ek Год назад +1

    Great tutorial! Many thanks!

  • @WookieLove1
    @WookieLove1 3 месяца назад

    Superb instructional video! Kudos!

  • @cabbott8
    @cabbott8 Год назад

    Excellent detail.

  • @champasackniladet4261
    @champasackniladet4261 3 месяца назад

    It’s great video, thanks

  • @wyattturna3535
    @wyattturna3535 Год назад +1

    PERFECT CLARITY!!

  • @BlackedOutRant
    @BlackedOutRant Год назад +1

    I would say to check the ignition plugs to make sure the connector doesn’t come off onto the spark plug. I made that mistake and had to replace two of those as well

  • @stevanrose7439
    @stevanrose7439 Год назад

    I had a misfire on my 02 Tacoma and went after the number 5 plug because it is the easiest to get to. When I was talking it out I thought I was breaking my ratchet because of how hard it was coming out. That plug was bad so the misfire went away. The rest of the plugs came easy. With 6 new plugs it runs like a top.

  • @godis...7837
    @godis...7837 2 года назад

    Great video again BYC.

  • @onmyway2heaven
    @onmyway2heaven 10 месяцев назад

    Thank you 😊

  • @donburns2123
    @donburns2123 6 месяцев назад

    Great video, Im going to try and change mine this weekend. I have a 2004 Tacoma 3.4L . Are the plugs the same for a 2004? I accidentally broke the top covering on the plug wire connected to the #4 coil I thought that I had to take that off to remove it. Does the coil have to grip the end of the plug with a locking sound? I pushed it down but didnt feel a secure grip when I tightened the screw for the coil?

  • @ilblues
    @ilblues Год назад

    Thank you.

  • @Miles-wy1zr
    @Miles-wy1zr 8 месяцев назад

    Just got a 1995 tacoma with this engine. Previous owner put single electrode platinum ngks. I keep getting a misfire with codes p0300 p0301 and p0303. He also put aftermarket ignition coils. Could single electrode spark plugs cause the misfire? Does it hurt the engine? I just ordered a set of Denso duel electrode spark plugs, wires, and ignition coils. Hopefully that clears up the misfires

  • @sk8nchill52
    @sk8nchill52 2 года назад +1

    Perfect thank you! I have a misfire on 3 and 6…. Probably the coil that controls them both

    • @backyardchevy328
      @backyardchevy328  2 года назад +1

      Yea that sounds like itd be a bad ignition coil since that one powers both of those

    • @bfields1448
      @bfields1448 9 месяцев назад

      ​​@@backyardchevy328I have same problem replaced coil and 2 plugs and still misfire. Even checked the wires and plugs with a tester and it's getting fire. Idk

  • @billmoore7305
    @billmoore7305 4 месяца назад

    👍Thank you sir!

  • @anwarbhatti1400
    @anwarbhatti1400 Год назад

    What is the fuel average per litre in city and high way

  • @CtznofEternity
    @CtznofEternity Год назад +4

    Question: NGK states specifically to not put Anti-Seize on since their plugs have trivalent plating, providing corrosion resistance. They even say it could be detrimental to your engine if you do so and it's completely unnecessary. Have you ever had an issue with this?

    • @bovideos9751
      @bovideos9751 Год назад +2

      The people at NGK (or any other spark plug maker) are not the ones removing the spark plugs after 100k, 200k, 300k+ miles. I always add some anti-seize and am careful not to over-torque the spark plugs. Here is some additional evidence: ruclips.net/video/oGlccL25i9Y/видео.html

  • @WilliamEaton-hf3im
    @WilliamEaton-hf3im Месяц назад

    Which coil pack is number three

  • @BAGAKOOS
    @BAGAKOOS 2 месяца назад

    How often should these spark plugs be replaced. I recently bought an ‘03 Toyota Tacoma with about 135k miles on it and everything works fine, it’s my backup vehicle. But I’m wondering what time of preventative maintenance I should look into doing. Thanks.

  • @thebrowithnoname1703
    @thebrowithnoname1703 Месяц назад

    Anyone know torque specs for a 2003 Taco 4 cylinder (2.4)?

  • @Orthodoxology
    @Orthodoxology Год назад +1

    I don’t have twin ground and need a quick temporary fix. Will the single ground work?

  • @jakefarm1280
    @jakefarm1280 2 года назад

    Would the NGK laser platinum #4302 spark plugs also work?

  • @santiagonovelo5747
    @santiagonovelo5747 11 месяцев назад

    I lose the spark plug connection cables

  • @full_metal_everything6929
    @full_metal_everything6929 2 года назад +1

    Helllooooo🥰

  • @energy_sage
    @energy_sage Год назад

    Replaced the plugs and the truck idles horribly, almost stalling out. What happened the job isn’t that complicated

    • @solaireofastora2959
      @solaireofastora2959 Год назад

      Did you ever get this solved? I encountered the same issue.

    • @SgtBergin
      @SgtBergin Год назад

      Did you get it fixed. Might look a buildup around the throttle body.

    • @flyingkangaroos1439
      @flyingkangaroos1439 Год назад +1

      Check and make sure you didn’t accidentally pop off or loosen a vacuum hose.

    • @energy_sage
      @energy_sage Год назад

      @@solaireofastora2959 yes I did finally had to take it to a shop I couldn’t figure it out. They said I crossfired a vacuum line which doesn’t make sense. I made sure to put everything back how it was and even took photos for reference. Don’t know if what they told me was true and they just said that to get some money out of me but whatever they did fixed it.

    • @CtznofEternity
      @CtznofEternity Год назад +1

      @@energy_sage I know this is late but I had the same issue. All I did was put 2 cans of B12 Chemtool Fuel Injector Cleaner after filling it with gas and it fixed the problem for me. If the fuel injectors are clogged then this could be something to troubleshoot.