What's funny is I had a strip mounted on the left wall for parts that I wasn't using anymore. It took a while for me to think of moving it to my bench. Then I did, and its awesome.
What I love about the reloading community, whether you have a high end room or a small space in a closet. It’s that at the end of the day we have to same mind set. Enjoyed your video and great reloading setup up. Happy Holidays!
Your one of my original favorite reloaders on the Googletube. I started reloading around the same time and always enjoyed and valued your videos. A giant "perfect" expensive reloading room setup, is not the most important thing, and I think its another part of why I admired your setup. Your powder drop invention I always admired, and I am currently slowly gathering materials to build one. I also really admired your quick change bench mounting accessory setups. Your bin mounting system on the bench is another great creative invention you have made that I plant to copy. Thanks for all you do, for us all.
Very nice of you to say sir! This has evolved one little thing at a time. I replied to you over on Rumble about the powder stand. I am looking for a manufacture to take this on, no strings attached. If you know of anyone in the industry send them my way. Ive got one mfg looking at it. Fingers crossed.
That TUL Organizer is awesome! I am not happy with my paper notebooks at all. I will look for that paper punch as well. Thank your wife for me 😊 I recently bought a Lee Classic Cast Turret Like yours and I am really amazed at its quality. I agree Rumble seems like where we are all going to end up. Thanks again. Paul
Yeah, that TUL is awesome! So is LCT. Ive been on RUclips for a long time. The platform is amazing but there are waves of cultural nonsense that go through without warning. Worse in election season. Its been pretty quiet for a while but I suspect it will change in 2024. Rumble is clunky but free and getting better.
Morning TreeTop, great video on your setup. I'm another that works with limited space, I ended up buying an old solid wood thick top office desk for $15 and putting a Lee Bench Plate system on it to use with my different presses. I also have a Black & Decker Workmate that I made a plywood bolt on top with a bench plate on it as well. Sometimes we have to get creative with what we have to work with.
Nice! We work with what we have and what we can find. I always knew the fancy reloading rooms were not neccessary but very pretty. The quality of some basic tools and equipment and our brains that is most important. Especially when starting out.
Man, what a great video you have a lot of great ideas. I hope some people watch it. I thought I had watched it before but apparently I missed it. Thanks for all the good ideas.
Thanks brother. Two really good ideas I took away from this video were the bin strips on the bench (Im thinking of using washers as my spacers) and the TUL Notebook System (which I had no idea about). Great video. - Jace
Sir, I am truly honored. Thank you very much for honoring my request for a "shop tour". I am still in the process of setting up (I suspect I will be doing that for a while yet - a never-ending work-in-progress type thing). I really liked the information about recording your reloading data - find something that works and go from there - I like your wife's idea notebook. I am also a woodworker (mostly hand tools) so now I'm looking at my very small workshop (10' x 12', with three workbenches) and I'm trying to figure out how I can use one of them for a reloading bench. You have given me a great foundation from which to begin. I am very grateful. I, too served in the military but got out after my four years, and while I suspect (from the name of your channel) you might have flown a small observer plane or a large whirlybird, I served on a big great boat bristling with large caliber weaponry and lobbed rounds into the jungle where those pesky enemy combatants who were dressed in black pajamas typically were found. I didn't get a lot of shooting time (none!) but I made sure we always had comms. Be well, my friend, and again, Thank you.
I sincerely hope you were able to use something from the video. I felt a little self conscience doing it to be honest. Sounds like putting your gear on removable mounts would be good for your situation. It would make your benches multi use. For a while I worked out of one of those job site portable parts bins, they close up and you can carry them like a suit case. I did that till I designated a place to leave set up. Yes I was a helicopter guy, not a pilot just a Crew chief / flight mech. I started on the famous Jolly Green Giants of of the Vietnam era but long after that conflict. Ended up with the mighty PaveLow. Thank you for your service, sometimes I wonder if we shouldn't still have those mighty guns in our battle groups. Don't get frustrated with your wood working and reloading, the Journey is more rewarding than the destination.
It wasn't really a video I wanted to make but I was asked. Organized isn't a word that comes to mind when I look at it when in use LOL. Your set up has really grown over the years... would be a good video as well. I'm glad you still like your stand. I quit making them and gave all the specs to Inline Fabrication. Hoping they start making them. Good to here from you Sir, hope you are well.
I never respond to these but I really appreciated the video. And the little strip idea for the bins gave me a head slap! Really great idea. What thickness was that strapping if you don’t mind me asking? Finding 1 inch by whatever length seems simple enough but much of it seems too flimsy up my way.
good stuff, great video, sir! goes to show that you don't have to spend $10,000 plus worth of reloading bells and whistles to reload accurate ammo! keep up the good work
Thanks for the kind comment! No you really dont need high end stuff to do good work as long as you know your tools. Nothing wrong with fine equipment though if it makes someone happy and confident.
Been following you since i first got into reloading last year. This is great stuff. One question (and I know this is almost a year old) but what is the "crane swingarm" setup you have for your powder dispensers. It's genius!
Something I designed to put a traditional powder measure over the Lee Classic Turret press. I sold them for a while but it got crazy and I wasnt set up for mass production. I gave the whole project to Inline Fabrication. dont think they ever did anything with it. Thinks for watching
TTF, with the exception of the RCBS have almost the same setup with the Lee CTP and Lee C-press (use the C-press mostly for de-capping and bullet resizing.) I also have the Lee Auto-Disk powder drop instead of your Auto-Drum. I use only digital powder scales and ultrasound brass cleaners these days.
Cool! Funny you mentioned the auto disk. I was going through some stuff the other day and found the auto disk. I pulled it out and set it up to see how it did with that cool charge bar. It works slick, but I gota say, it was not as accurate as the auto drum for me. I think the auto drum might leak fine powder worse with really fine powder. But other than that the auto-drum was an improvement. That little C-press is handy. Thanks for watching and commenting. Keep loading.
I think most people are fans of the Lee Auto Drum, but I never learned to use one.I never liked the Lee charge bar accessory and so I ended up getting extra Auto Disks and side-drill the charge holes to accept coarse-thread allen set screws. Screwing the set screws in and out let me fine-tune the powder charge. I can now meter even fine flake powders accurately.
Did you make your powder measure stands? I have RCBS powder measure that I would like to mount about my turret press like you have yours. Thanks for the video, really good ideas.
I did design and make those powder measure stands. I gave the design to Dan at inline fabrication. Not sure if he has (or will) started making them. Glad you enjoyed the video.
The way I overcame flexing of the reloading table surface was to take a half-sheet of 9-ply 3/4-inch oak veneered plywood, cut it in half on the long side, then glue the two cut pieces together for a nominal thickness of 1.5 inches (actual, around 1.42 inches). I covered all exposed wood with several coats of marine spar varnish. This surface will not flex even on the overhangs. You can buy a cheap HF grinder stand and bolt the plywood to it for a nice compact reloading table. Cheers
Well, thought I would see what you have been up to, So, yes, keeping things organized is the priority. thinking things out about how much you shoot is another thing you also need to keep in mind. or if you will start casting bullets, again, room, room, room is what you need. anyway, quality that beats off the shelf ammo can be had without a lot of expensive unnecessary equipment so don't get all caught up in the (Got to have it) mode. Just work on your marksmanship skills because that is where it is at. great video, peace out- Dave
Hey Dave! I didnt even get into the whole casting thing, that rabbit hole goes deep and I'm just a novice. Thanks for saying Hi. Hope you're doing well sir.
I agree it doesn’t take a lot of space and you certainly don’t have to buy the ultra expensive equipment that’s out there today. But the only thing that is troubling is the price of components. I dont know if it’s the manufacturers or the distributors but someone has lost their minds. A thousand primers is almost if not $100 and a pound of powder is almost as high at $75-$95 depending upon what you want. I would seriously consider that when getting into the hobby. At these prices it’s simply not worth it. The factory ammo manufacturers are loading just about every quality bullet you want these days. It really seems like the forces that be are wanting to make it more expensive to shoot so people can’t afford it anymore and our guns will be useless. I see no reason to reload and pay more money per round than I can buy it for already made. I’ve got thousands of dollars worth of equipment that is sitting there doing nothing. And unless these manufacturers and distributors stop charging these prices it will continue to do nothing.
Thanks for watching! I agree that the cost of reloading components particularly powder and primers has really gone up, but the cost of ammo hasnt done much better. Easy spend a $40+ for a box of rifle cartridges. I find myself using lower cost powder like CFE223 or BL-C(2) instead of Varget or H4895. a pound of CFE223 is about $38 and it will do about 150 308 loads. It looks like manufactures are catching up from the extraordinary demand of the civilian market after co vid and Biden panic. Hoping for a continued reduction in pricing in the future as products come back on line.
I hope you are having a good time! Your content is very good and you have a good amount of subscribers. *But your video optimization section area is not correct, SEO score is low. That’s why your video is not reaching more and more people.* As the views increase, so will the benefit. I think your RUclips channel will make your dream come true. I'm a certified RUclips SEO expert with a passion for optimizing and a RUclips channel manager. Can I help promote your channel?
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Here is a link Western Powders load data.
hodgdonpowderco.com/wp-content/uploads/2023/04/WesternPowdersHandloadingGuide8.0_WEB-1.pdf
The metal strip addition for bin organization is a clever idea...I dig it...thanks brother
What's funny is I had a strip mounted on the left wall for parts that I wasn't using anymore. It took a while for me to think of moving it to my bench. Then I did, and its awesome.
What I love about the reloading community, whether you have a high end room or a small space in a closet. It’s that at the end of the day we have to same mind set.
Enjoyed your video and great reloading setup up.
Happy Holidays!
Thanks for watching and happy holidays to you as well.
Your one of my original favorite reloaders on the Googletube. I started reloading around the same time and always enjoyed and valued your videos. A giant "perfect" expensive reloading room setup, is not the most important thing, and I think its another part of why I admired your setup. Your powder drop invention I always admired, and I am currently slowly gathering materials to build one. I also really admired your quick change bench mounting accessory setups. Your bin mounting system on the bench is another great creative invention you have made that I plant to copy. Thanks for all you do, for us all.
Very nice of you to say sir! This has evolved one little thing at a time. I replied to you over on Rumble about the powder stand. I am looking for a manufacture to take this on, no strings attached. If you know of anyone in the industry send them my way. Ive got one mfg looking at it. Fingers crossed.
Very nice presentation TreeTop. I’m sure that you’ve given a lot of new reloaders some great ideas! 🤛🏻🔫🇺🇸
Thank you sir, means a lot coming from you!
That TUL Organizer is awesome! I am not happy with my paper notebooks at all. I will look for that paper punch as well. Thank your wife for me 😊 I recently bought a Lee Classic Cast Turret Like yours and I am really amazed at its quality. I agree Rumble seems like where we are all going to end up. Thanks again. Paul
Yeah, that TUL is awesome! So is LCT. Ive been on RUclips for a long time. The platform is amazing but there are waves of cultural nonsense that go through without warning. Worse in election season. Its been pretty quiet for a while but I suspect it will change in 2024. Rumble is clunky but free and getting better.
I printed out that Western Powder PDF at work. Love True Blue, Silhouette & TAC!
Its a good resource, I wish all data was laid out like that. Little hard to find now. I found a link too it and pinned it at the top of the comments.
Thanks for your great presentation. I'm going to copy some of your set up. Very helpful.
Thank you very much! I'm glad you got some use out of it.
Really like the bin holders. I found a couple of 2 foot pieces that were designed to hold the bins in a dumpster at work,a real space saver.
Good find! This has been a really nice upgrade for me. Should have done it sooner.
Awesome compact gig ya got there 👍👍
Thanks, It keeps growing though. My curiosity gets me in trouble.
Good stuff brother!! ❤❤
Humbling to put out a video like this amongst old pro's like your self. Best of the morning to you sir.
Morning TreeTop, great video on your setup. I'm another that works with limited space, I ended up buying an old solid wood thick top office desk for $15 and putting a Lee Bench Plate system on it to use with my different presses. I also have a Black & Decker Workmate that I made a plywood bolt on top with a bench plate on it as well. Sometimes we have to get creative with what we have to work with.
Nice! We work with what we have and what we can find. I always knew the fancy reloading rooms were not neccessary but very pretty. The quality of some basic tools and equipment and our brains that is most important. Especially when starting out.
No doubt! I suspect there are a lot of us that evolved that way.
Man, what a great video you have a lot of great ideas. I hope some people watch it. I thought I had watched it before but apparently I missed it. Thanks for all the good ideas.
Thanks for the kind words. It took me a while to get this setup working. I hope it gives you some good ideas.
Thanks brother. Two really good ideas I took away from this video were the bin strips on the bench (Im thinking of using washers as my spacers) and the TUL Notebook System (which I had no idea about). Great video.
- Jace
Awesome, thanks for watching and taking the time to comment, glad you found something useful in my ramblings!
Great video, lots of good info and insight and nice, thoughtful bench set-up. Thank you.
Thanks for watching!
I like the metal strip idea for the bins .
Its been a really nice upgrade to my bench. I wish I had thought of it sooner.
Sir, I am truly honored. Thank you very much for honoring my request for a "shop tour". I am still in the process of setting up (I suspect I will be doing that for a while yet - a never-ending work-in-progress type thing). I really liked the information about recording your reloading data - find something that works and go from there - I like your wife's idea notebook. I am also a woodworker (mostly hand tools) so now I'm looking at my very small workshop (10' x 12', with three workbenches) and I'm trying to figure out how I can use one of them for a reloading bench. You have given me a great foundation from which to begin. I am very grateful.
I, too served in the military but got out after my four years, and while I suspect (from the name of your channel) you might have flown a small observer plane or a large whirlybird, I served on a big great boat bristling with large caliber weaponry and lobbed rounds into the jungle where those pesky enemy combatants who were dressed in black pajamas typically were found. I didn't get a lot of shooting time (none!) but I made sure we always had comms.
Be well, my friend, and again, Thank you.
I sincerely hope you were able to use something from the video. I felt a little self conscience doing it to be honest. Sounds like putting your gear on removable mounts would be good for your situation. It would make your benches multi use. For a while I worked out of one of those job site portable parts bins, they close up and you can carry them like a suit case. I did that till I designated a place to leave set up. Yes I was a helicopter guy, not a pilot just a Crew chief / flight mech. I started on the famous Jolly Green Giants of of the Vietnam era but long after that conflict. Ended up with the mighty PaveLow. Thank you for your service, sometimes I wonder if we shouldn't still have those mighty guns in our battle groups. Don't get frustrated with your wood working and reloading, the Journey is more rewarding than the destination.
Great ideas mate cheers for sharing 👍
Thanks, hope you got something out of it!
Great job and enjoyed seeing your setup. Very well done and organized. Still loving your powder measure stand.
It wasn't really a video I wanted to make but I was asked. Organized isn't a word that comes to mind when I look at it when in use LOL. Your set up has really grown over the years... would be a good video as well. I'm glad you still like your stand. I quit making them and gave all the specs to Inline Fabrication. Hoping they start making them. Good to here from you Sir, hope you are well.
Hi thanks for sharing your setup I also have limited space and it’s functional thanks for sharing
Hope there was something useful in it. Thanks for commenting!
Great Stuff. Thx
Glad you liked it!
I never respond to these but I really appreciated the video. And the little strip idea for the bins gave me a head slap! Really great idea. What thickness was that strapping if you don’t mind me asking? Finding 1 inch by whatever length seems simple enough but much of it seems too flimsy up my way.
Lol, I head slapped myself...It's so obvious, why didn't I think of it sooner 😅 anyway it's basic 1/8" × 1" strap. Thanks for watching!
good stuff, great video, sir! goes to show that you don't have to spend $10,000 plus worth of reloading bells and whistles to reload accurate ammo! keep up the good work
Thanks for the kind comment! No you really dont need high end stuff to do good work as long as you know your tools. Nothing wrong with fine equipment though if it makes someone happy and confident.
Been following you since i first got into reloading last year. This is great stuff.
One question (and I know this is almost a year old) but what is the "crane swingarm" setup you have for your powder dispensers. It's genius!
Something I designed to put a traditional powder measure over the Lee Classic Turret press. I sold them for a while but it got crazy and I wasnt set up for mass production. I gave the whole project to Inline Fabrication. dont think they ever did anything with it. Thinks for watching
@TreeTopFlier thanks. Looks like a truly awesome tool that would be a great addition to the IF quick change plates I use.
TTF, with the exception of the RCBS have almost the same setup with the Lee CTP and Lee C-press (use the C-press mostly for de-capping and bullet resizing.) I also have the Lee Auto-Disk powder drop instead of your Auto-Drum. I use only digital powder scales and ultrasound brass cleaners these days.
Cool! Funny you mentioned the auto disk. I was going through some stuff the other day and found the auto disk. I pulled it out and set it up to see how it did with that cool charge bar. It works slick, but I gota say, it was not as accurate as the auto drum for me. I think the auto drum might leak fine powder worse with really fine powder. But other than that the auto-drum was an improvement. That little C-press is handy. Thanks for watching and commenting. Keep loading.
I think most people are fans of the Lee Auto Drum, but I never learned to use one.I never liked the Lee charge bar accessory and so I ended up getting extra Auto Disks and side-drill the charge holes to accept coarse-thread allen set screws. Screwing the set screws in and out let me fine-tune the powder charge. I can now meter even fine flake powders accurately.
Did you make your powder measure stands?
I have RCBS powder measure that I would like to mount about my turret press like you have yours.
Thanks for the video, really good ideas.
I did design and make those powder measure stands. I gave the design to Dan at inline fabrication. Not sure if he has (or will) started making them. Glad you enjoyed the video.
The way I overcame flexing of the reloading table surface was to take a half-sheet of 9-ply 3/4-inch oak veneered plywood, cut it in half on the long side, then glue the two cut pieces together for a nominal thickness of 1.5 inches (actual, around 1.42 inches). I covered all exposed wood with several coats of marine spar varnish. This surface will not flex even on the overhangs. You can buy a cheap HF grinder stand and bolt the plywood to it for a nice compact reloading table. Cheers
Sounds like a nice sturdy work space. Thanks for watching and commenting.
Well, thought I would see what you have been up to, So, yes, keeping things organized is the priority. thinking things out about how much you shoot is another thing you also need to keep in mind. or if you will start casting bullets, again, room, room, room is what you need. anyway, quality that beats off the shelf ammo can be had without a lot of expensive unnecessary equipment so don't get all caught up in the (Got to have it) mode. Just work on your marksmanship skills because that is where it is at. great video, peace out- Dave
Hey Dave! I didnt even get into the whole casting thing, that rabbit hole goes deep and I'm just a novice. Thanks for saying Hi. Hope you're doing well sir.
Good video!
Thanks!
Great video 👍🇺🇸
Thanks Jesse
I’m the same way with the scales. Never thought about till now that you mention it.
Im good at what I do...until I make a mistake, so I have to protect my self...from my self. 😆
you are way more organized then me
Maybe, but that's not how I started off. lol
I agree it doesn’t take a lot of space and you certainly don’t have to buy the ultra expensive equipment that’s out there today. But the only thing that is troubling is the price of components. I dont know if it’s the manufacturers or the distributors but someone has lost their minds. A thousand primers is almost if not $100 and a pound of powder is almost as high at $75-$95 depending upon what you want. I would seriously consider that when getting into the hobby. At these prices it’s simply not worth it. The factory ammo manufacturers are loading just about every quality bullet you want these days. It really seems like the forces that be are wanting to make it more expensive to shoot so people can’t afford it anymore and our guns will be useless. I see no reason to reload and pay more money per round than I can buy it for already made. I’ve got thousands of dollars worth of equipment that is sitting there doing nothing. And unless these manufacturers and distributors stop charging these prices it will continue to do nothing.
Thanks for watching! I agree that the cost of reloading components particularly powder and primers has really gone up, but the cost of ammo hasnt done much better. Easy spend a $40+ for a box of rifle cartridges. I find myself using lower cost powder like CFE223 or BL-C(2) instead of Varget or H4895. a pound of CFE223 is about $38 and it will do about 150 308 loads. It looks like manufactures are catching up from the extraordinary demand of the civilian market after co vid and Biden panic. Hoping for a continued reduction in pricing in the future as products come back on line.
"Multi-use area" aka man cave 😁
That it is, sometimes I just hang out in there.
@@TreeTopFlier "hang out in man cave" - respite at home 😂
I think the poor guy just abandoned all notions of getting into this hobby lol
Ha, maybe my video will serve as a warning, avoid at all costs or you'll end up like the deranged guy in this video.
I hope you are having a good time!
Your content is very good and you have a good amount of subscribers. *But your video optimization section area is not correct, SEO score is low. That’s why your video is not reaching more and more people.* As the views increase, so will the benefit. I think your RUclips channel will make your dream come true.
I'm a certified RUclips SEO expert with a passion for optimizing and a RUclips channel manager.
Can I help promote your channel?
I am having a good time, thanks!