#8 Cutting T slots. Mastering Carveco in minutes.
HTML-код
- Опубликовано: 2 авг 2024
- Mastering Carveco in minutes: #8 lightning-fast tutorial cutting T slots
In this quicky tutorial I show how to program in Carveco to cut a T slot in a work piece.
I show how the machine cuts the T slot in the end of the tutorial.
Check out Carveco software with the link below.
Carveco link
carv.eco/3IkbxWz
Leighton's video
• Carveco Maker Tutorial...
PWNCNC link
Https://pwncnc.com/?ref=D7STa4Rxeaj8P
00:00 Introduction
00:10 what tool is needed
00:52 my tool example
01:46 how its done
02:52 what's going to happen
04:27 simulation
05:18 cutting the slot
06:04 thank you like and subscribe please Хобби
This was one of the first things I wanted to learn how to do back in the day! This is the best I have ever seen it taught! Thank you, Vernon! Have fun at WORKBENCHcon!
Thanks Dana! I’ll be sure to report how things went this year @workbench
Thanks for the reference info. I'm sure I will use this!
You’re very welcome
Safer to force the green Start Node to be at your defined end location. Don't want CarveCo deciding to plunge half way along the slot!!
More than one way for sure I’ve always had success my way
By setting the plunge depth the same as the cut length of the bit I’ve never had an issue