How to Replace A Boat Tilt Trailer Tongue With a Longer One
HTML-код
- Опубликовано: 5 июл 2024
- In this video, I show how to replace the 8 ft boat trailer tongue with an 11 foot tongue. The trailer is the correct size and capacity for a 17 ft Boston Whaler Montauk but a bit short for my tastes. Adding three feet to the length will make it easier to launch without dunking half the truck in the the water at the boat ramp. This will of course change the tongue weight. Once I finish the restoration and have all the components installed in the Montauk I'll check and adjust if necessary.
I'll be making a few minor changes in the future. or one thing, I'll be changing the nuts on all the components to locking nuts. I'll also probably cut the safety chain into two separate units.
Here are some affiliate links to the materials and tools I used in this video:
Dual Fit Coupler: amzn.to/3KDxkLj
Trailer Winch: amzn.to/3ZogLqD
Safety Chains: amzn.to/3SAEXEa
Wiring Harness: amzn.to/3Z6FbFA
Trailer Jack amzn.to/3KBWjyy
Please visit out Amazon Storefront where you'll find many of the tools and materials we use in our videos.
www.amazon.com/shop/josesextr...
00:00 Introduction
00:30 Removing the Winch Post
00:50 Placing the Jack Stands
01:16 Removing the Tongue
02:46 Temporarily Mounting New Tongue
04:38 Marking and Drilling Holes on New Tongue
05:22 Installing New Tongue
11:55 Installing Winch Post and Jack
07:54 Installing new Coupler
08:45 Installing Safety Chain
11:56 Trailer Wiring
#trailer
#boat
#tongue
Now this is the proper way to make ur trailer longer. Not that cutting and splicing the tongue together than most people do. Great job.
Thanks, I appreciate it!
If you take the wench assembly completely off with the roller. Does the boat lean forward at all on the bunks?
It actually sits evenly on all the bunks with or without the Winch. I set the winch height so it doesn't lift or pull the boat down
Where do you get the longer tongue?
I bought tubular steel, 3"x3"x 3/16 thick. aa feet of it. Ran me a bit over $110 in NC