Pro tip, if you have sequential indicators they have their own relay built into them Take off your relay and connect the two pins together with wire or a connector to bridge it, and perfectly working sequential indicators without spending anything You're welcome
Possibly could work on a bike with only 2 pins but mine has six on the relay so don't think it will work I have previously fitted these two different motorcycles it don't work properly these do not have inbuilt resistors but I will try it with my other set thank you
Was just about to try this out just checking comments to see if anyone ealse had jumped the contacts haha ill go try this. I was thinknig this becase i put the led over the battry to make sure they worked as i was getting nothing at all. I think i might stiill need a diode kit as its an old suzuki bandit.
What about flow rate to pass mot I fitted these, yesterday front and back and bridged the relay but was told it would fail mot due to flow rate speed??
@@leejones3061 i had no issues passed mot. My issue was thay the dash indicator didnt flash anymore. Need new relay and resistor kit to fit it. Flow rate wasnt an issue. It is a problem with the relay replacment. But i passed mot with dash issues as you can see indicators from driving position.
How would you work it if only the front ones were sequential and the back ones were regular? Can you bypass the flasher module for just the front ones?
Dear sir, instead of the stock turn signals on my V Strom DL650, 2014, I installed a sequential flow. I installed an automatic relay for the LED lighting instead of the original automatic relay. For the shade, they work a little faster (I honestly don't like it), and the led indicators on the instrument panel are only bright and do not blink. Even when all four indicators are working, the LED indicators do not blink, they just light up. PLEASE help how to make the indicator blink. greeting
Oh my God this video is so cool I didn’t know what I was doing until I watched it thanks a lot Toady when are the next video is coming also I was thinking of upgrading my headlights to one of the new superbright LED is and what about a video on upgrading hp on your bike for cheap😇😎.
Take the relay off completely and put a wire between the connectors that plug into the relay, this will bypass relay and sequential indicators will work.
The sequential indicators do not have a built-in relay so can be fitted to any motorcycle provided they do a LED relay too slow no the flash rate down if not it will not work properly I hope this helps you
Might want to do some research on how that resistor should be wired. Black stays on neg side. Yellow stays on pos side. If I could post a pic I would. But they didn't work because you wired them incorrectly. Kindly :)
Clearly I'm way to late to comment but hopefully you can help me out or someone on here. I purchased the same indicators as you but didn't realise they come with 3 wires, the original only have two so it's got me lost. I noticed you had the red and black wire connected but not the blue? Mine has a black, red & green wire so I don't connect the green? I'm totally lost in what to do, does anyone know where the green wire goes?
@@bOjan1141 I have found these on ebay which I'm thinking of trying so hopefully it might help you as well, no one has helped me but here check these out...Indicator Turn Signals Wiring Harness Adapter 3 Pin For Suzuki SV650/650S SV1000 or put your specific bike ofcourse
You'll have to get a specific LED relay for your bike if you would like to fit LED indicators as they do not have any resistance so they will not flash I did put the link below if you have the same bike if not search LED relay for your specific bike I hope this helps
I fitted sequential indicators front and back yesterday on different bike initial install the indicators wouldnt flow to the end so fitted load resistors that just made them all flash at once hazading so was told to bridge the relay so I did and there all working but was told they, could fail mot due to the flow rate speed I had a led relay as was using led set up just not sequential
I just had my motorcycle MOT'd 2-days ago go and they did not say anything it passed with flying colours as all new Audis and Mercedes have this new feature I can't see it failing if the LEDs and the indicators are working but please update
Put led relay and gets what no matters what side i press on button,its always light left and right on front and only rear on back,dunno whats the problem
It will be the relay you have to get an LED relay as it will not work without it you will have to search online or eBay or Amazon for your bike specific LED relay if they do not do one then you can not get it to work As the problem you are having is your standard motorcycle relay is not capable of delaying the signal that your indicators need I have tried everything else and only the LED relay will work
If you look at the video the first one have internal resistors but will not work that one I actually fitted does not have a relay the relay will slow down the signal so the LEDs will work if you have purchased ones with an internal resistor you might be able to just bypass the relay only if you have two wires simply touch them together and the indicators will become the relays this will only work with a 2 wire relay system if you have more than 2 do not do this as you will damage your bike if you can search online for your bike specific LED relay play it must say LED on it it for it to work correctly I hope this helps
@@sammouss6901 Hi mate. i installed a bike specific 7 pin led relay. Did not change at all ? Still only light up about half way. It is a 2008 gsx 650f .
I'm pretty sure you will need to as the resistance to delay the flashing is inbuilt in a standard bulb with LEDs especially strobing ones there is no resistance so it will only light up a few LED cells the only way to get resistance is to delay it with a resistor you can test it by Simply swapping one indicator but I'm pretty sure you'll need a relay I hope this helps
you can just short the relay with seqencial led indicators and mabie the diodie mod if you have one filliment dash bulb but the circuits in the indercators on these but dont do it to the standard flashing leds they need the led relays off ebay cheap as chips.
I'm sure I put it in the add addwww.ebay.co.uk/itm/4x-LED-Motorcycle-Rear-Front-DRL-Sequential-Flowing-Turn-Signal-Light-Indicator-/133701753225?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
They do not have a name just following indicators I have the link below in my add or try this one www.ebay.co.uk/itm/2pcs-Motorcycle-Sequential-Flowing-LED-Turn-Signal-Indicator-Blinker-Light-/284383815158?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Not sure but possibly some indicators have built-in relays like the first indicator as show in the video so basically if you have for relays it will not work better to buy the indicators without relays then change your main relay and it should work but make sure you can get a LED relay hopefully that should fix your problem the indicators in video you are about £17 for 4 off eBay the main LED relay cost about £7 but it has to be specifically made for your bike and must be a special LED relay to slow down the signal in order for the indicator to strobe I hope this helps
I bought this indicator and I facing the same problem with my Bajaj pulsar rs 200...I search whole internet but didn't find where is the relay's location...some gyz says that pulsar rs 200 hasn't have any relay for indicator...I don't know I faded up.
I have no idea how you could do this the inline indicators do not work but that's the only thing I could suggest or buy another set of Led indicators I'm sure they should be cheaper than when I purchased them
Hi, thanks a lot for the video. I ride a Hornet and my new built in relay signals are not working at all with the original bike relay. I have a 4 pin relay. I tried to search a relay for my motorcycle model but they are not specifying if it does work with the built in relay signals. Someone tried some of them on a 4 pin honda? Thanks
Hello boby bob I think the problem you're encountering is the same one I had you cannot put indicators with relays on relays it simply will not work if you have a simple 4 pin relay it's literally 2 + 2- if you can find out which is Which Bridge the circuit as long as you have inbuilt relays in your indicator it should work the only alternative is if you can get a specific relay for your motorcycle you will have to get the indicators with out a relay and it will work perfectly www.ebay.co.uk/itm/LED-Indicator-Flasher-Relay-4-Pin-For-Honda-CB600F-Hornet-07-11-Fast-Flash-Fix-/175099315275?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0 I have found this relay on eBay it will only work if your indicators do not have a inbuilt relay I hope this helps
If you have standard indicators the relay will not make them flash sequentially you will need to replace your indicators with sequential ones without relays then purchased that relay and it worked perfectly unfortunately if you purchased indicators with relays they simply do not work as they're multi-use not specific for the bike the indicators I bought off eBay were only £20 four of them and the relay will set you back another £10 so for £30 you can get sequential lights small price to pay for such an upgrade just make sure the indicators you buy do not have relays and you're all good
www.ebay.co.uk/itm/233687870828 here you go go I hope this one helps simply typing sequential indicator lights and about 200 will come up on eBay you can now get it in different colours as well
If I've understood you correctly you are on about the background music it's a free app called you cut video editor you'll get free music and be able to edit videos for free
I have a scooter with in front non led and at the back also non LED, i want to keep the non LED in the front but i also want to out the led sequence turn signals at the back. How can I do this? Wich resistor do I have to use
I've put the relay link in the the video it's a 6 or 7 pin relay specifically for this Suzuki but it depends on what indicators you have as this is made specifically for indicators without relays the part number is in the add
As I don't receive any money from anyone I don't put links in but I hope this helps www.ebay.co.uk/itm/303611580047. www.ebay.co.uk/itm/373036251635 hopefully these links work and you can get a link to the indicators and the relay
Just got a gsx650f done the same as you with resisters didn't work your relay guide worked for me good job thanks
Nice one saves a lot of unnecessary messing about thanks for the heads up I’m looking to fit led indicators to my tracer 900gt thanks 😊
please tell me what you did with that extra wire. cant get back light to work i'm guessing the extra wire is for that
Pro tip, if you have sequential indicators they have their own relay built into them
Take off your relay and connect the two pins together with wire or a connector to bridge it, and perfectly working sequential indicators without spending anything
You're welcome
Possibly could work on a bike with only 2 pins but mine has six on the relay so don't think it will work I have previously fitted these two different motorcycles it don't work properly these do not have inbuilt resistors but I will try it with my other set thank you
Was just about to try this out just checking comments to see if anyone ealse had jumped the contacts haha ill go try this. I was thinknig this becase i put the led over the battry to make sure they worked as i was getting nothing at all. I think i might stiill need a diode kit as its an old suzuki bandit.
What about flow rate to pass mot I fitted these, yesterday front and back and bridged the relay but was told it would fail mot due to flow rate speed??
@@leejones3061 i had no issues passed mot. My issue was thay the dash indicator didnt flash anymore. Need new relay and resistor kit to fit it. Flow rate wasnt an issue. It is a problem with the relay replacment. But i passed mot with dash issues as you can see indicators from driving position.
How would you work it if only the front ones were sequential and the back ones were regular? Can you bypass the flasher module for just the front ones?
You need PHD to figure it out. But they looks nice mate. Well done 👍
Dear sir,
instead of the stock turn signals on my V Strom DL650, 2014, I installed a sequential flow. I installed an automatic relay for the LED lighting instead of the original automatic relay. For the shade, they work a little faster (I honestly don't like it), and the led indicators on the instrument panel are only bright and do not blink. Even when all four indicators are working, the LED indicators do not blink, they just light up. PLEASE help how to make the indicator blink. greeting
Oh my God this video is so cool I didn’t know what I was doing until I watched it thanks a lot Toady when are the next video is coming also I was thinking of upgrading my headlights to one of the new superbright LED is and what about a video on upgrading hp on your bike for cheap😇😎.
Nice informative video Sam. Cheers. Ride safe. 👍🏻🏍😊
Thanks for sharing helped me out
I really like these indicators... whats the brand name and model?? You've uploaded ebay links but they don't work....
Nice video. Thanks!
Pls, how can I bypass the motorcycle relay when I'm using built-in relay sequential turning lights.
Take the relay off completely and put a wire between the connectors that plug into the relay, this will bypass relay and sequential indicators will work.
Will this relay work with led lights in front and stock light on back? (Honda cbf 500 - 2004)
wow thank you so much!!! i have the same problem
Ww is max out of the max
The sequential indicators do not have a built-in relay so can be fitted to any motorcycle provided they do a LED relay too slow no the flash rate down if not it will not work properly I hope this helps you
did you map yourself or send ecu away?
Might want to do some research on how that resistor should be wired. Black stays on neg side. Yellow stays on pos side. If I could post a pic I would. But they didn't work because you wired them incorrectly.
Kindly :)
Clearly I'm way to late to comment but hopefully you can help me out or someone on here. I purchased the same indicators as you but didn't realise they come with 3 wires, the original only have two so it's got me lost. I noticed you had the red and black wire connected but not the blue? Mine has a black, red & green wire so I don't connect the green? I'm totally lost in what to do, does anyone know where the green wire goes?
i have the same problem
@@bOjan1141 I have found these on ebay which I'm thinking of trying so hopefully it might help you as well, no one has helped me but here check these out...Indicator Turn Signals Wiring Harness Adapter 3 Pin For Suzuki SV650/650S SV1000 or put your specific bike ofcourse
@@joshuayarker6364 Thank you brother, you saved me. I ordered them hope they arrive fast.
@@bOjan1141 anytime my friend, glad I could help! Hopefully real fast! 🤞
Txn man i doubted about that but was not sure now i know txn
What kind of relay sir you replace?tnx
You'll have to get a specific LED relay for your bike if you would like to fit LED indicators as they do not have any resistance so they will not flash I did put the link below if you have the same bike if not search LED relay for your specific bike I hope this helps
I fitted sequential indicators front and back yesterday on different bike initial install the indicators wouldnt flow to the end so fitted load resistors that just made them all flash at once hazading so was told to bridge the relay so I did and there all working but was told they, could fail mot due to the flow rate speed I had a led relay as was using led set up just not sequential
I just had my motorcycle MOT'd 2-days ago go and they did not say anything it passed with flying colours as all new Audis and Mercedes have this new feature I can't see it failing if the LEDs and the indicators are working but please update
Put led relay and gets what no matters what side i press on button,its always light left and right on front and only rear on back,dunno whats the problem
Hi mate. i have the lights that only the first 3 lights light up. What is the fix for that. Cheers.
I have the same problem on my Kawasaki z800. When I plug them only the first couple light up very poorly.
It will be the relay you have to get an LED relay as it will not work without it you will have to search online or eBay or Amazon for your bike specific LED relay if they do not do one then you can not get it to work
As the problem you are having is your standard motorcycle relay is not capable of delaying the signal that your indicators need I have tried everything else and only the LED relay will work
@@sammouss6901 Does your lights also have their own relay? As in one built in the lights
If you look at the video the first one have internal resistors but will not work that one I actually fitted does not have a relay the relay will slow down the signal so the LEDs will work if you have purchased ones with an internal resistor you might be able to just bypass the relay only if you have two wires simply touch them together and the indicators will become the relays this will only work with a 2 wire relay system if you have more than 2 do not do this as you will damage your bike if you can search online for your bike specific LED relay play it must say LED on it it for it to work correctly I hope this helps
@@sammouss6901 Hi mate. i installed a bike specific 7 pin led relay. Did not change at all ? Still only light up about half way. It is a 2008 gsx 650f .
Iv just bought a set for my adrenaline! Will i have to buy a relay too? Its not just a case of swapping them over?
I'm pretty sure you will need to as the resistance to delay the flashing is inbuilt in a standard bulb with LEDs especially strobing ones there is no resistance so it will only light up a few LED cells the only way to get resistance is to delay it with a resistor you can test it by Simply swapping one indicator but I'm pretty sure you'll need a relay I hope this helps
Ah cool thanks for your response!
you can just short the relay with seqencial led indicators and mabie the diodie mod if you have one filliment dash bulb but the circuits in the indercators on these but dont do it to the standard flashing leds they need the led relays off ebay cheap as chips.
@@spongbob18 thanks pal
In they looked great but you confused me throughout the video. Do you have a Link for the blinkers?
I'm sure I put it in the add addwww.ebay.co.uk/itm/4x-LED-Motorcycle-Rear-Front-DRL-Sequential-Flowing-Turn-Signal-Light-Indicator-/133701753225?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
@@sammouss6901you did but only for the relay!!
what's the name of the brand for the bigger indicators with blue arrows?
They do not have a name just following indicators I have the link below in my add or try this one www.ebay.co.uk/itm/2pcs-Motorcycle-Sequential-Flowing-LED-Turn-Signal-Indicator-Blinker-Light-/284383815158?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0
Where did u buy them indicators cheers
I did put the link in the ad but you have to be careful if you buy one with relay it will not work
Hi, would you have the link to does indicators please can't seem to find them
i think they’re lextek sequential indicators. 16 quid a pair on CMPO
What should i do if i put all 4 on and its working but it cant go left or right only in hazard mode
Not sure but possibly some indicators have built-in relays like the first indicator as show in the video so basically if you have for relays it will not work better to buy the indicators without relays then change your main relay and it should work but make sure you can get a LED relay hopefully that should fix your problem the indicators in video you are about £17 for 4 off eBay the main LED relay cost about £7 but it has to be specifically made for your bike and must be a special LED relay to slow down the signal in order for the indicator to strobe I hope this helps
I bought this indicator and I facing the same problem with my Bajaj pulsar rs 200...I search whole internet but didn't find where is the relay's location...some gyz says that pulsar rs 200 hasn't have any relay for indicator...I don't know I faded up.
ruclips.net/video/CEqlGv6j8qk/видео.html. I hope this helps unfortunately it's not in English but it may give you where to look
Hey, i have the same problem, but what to do if my front turn signals are oem but rear led ?
I have no idea how you could do this the inline indicators do not work but that's the only thing I could suggest or buy another set of Led indicators I'm sure they should be cheaper than when I purchased them
Hi, thanks a lot for the video. I ride a Hornet and my new built in relay signals are not working at all with the original bike relay. I have a 4 pin relay. I tried to search a relay for my motorcycle model but they are not specifying if it does work with the built in relay signals. Someone tried some of them on a 4 pin honda? Thanks
Hello boby bob I think the problem you're encountering is the same one I had you cannot put indicators with relays on relays it simply will not work if you have a simple 4 pin relay it's literally 2 + 2- if you can find out which is Which Bridge the circuit as long as you have inbuilt relays in your indicator it should work the only alternative is if you can get a specific relay for your motorcycle you will have to get the indicators with out a relay and it will work perfectly www.ebay.co.uk/itm/LED-Indicator-Flasher-Relay-4-Pin-For-Honda-CB600F-Hornet-07-11-Fast-Flash-Fix-/175099315275?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=710-127635-2958-0 I have found this relay on eBay it will only work if your indicators do not have a inbuilt relay I hope this helps
Thank you. I think that relay is for flashin only, right? Even if I purchase simple led signals, they won't flash sequencially..
If you have standard indicators the relay will not make them flash sequentially you will need to replace your indicators with sequential ones without relays then purchased that relay and it worked perfectly unfortunately if you purchased indicators with relays they simply do not work as they're multi-use not specific for the bike the indicators I bought off eBay were only £20 four of them and the relay will set you back another £10 so for £30 you can get sequential lights small price to pay for such an upgrade just make sure the indicators you buy do not have relays and you're all good
Can I get the link to buy that light which have arrow shape blue DRL on the back
www.ebay.co.uk/itm/233687870828 here you go go I hope this one helps simply typing sequential indicator lights and about 200 will come up on eBay you can now get it in different colours as well
Wich relais are you using?
If I've understood you correctly you are on about the background music it's a free app called you cut video editor you'll get free music and be able to edit videos for free
@@sammouss6901 no I meant resistor
I have a scooter with in front non led and at the back also non LED, i want to keep the non LED in the front but i also want to out the led sequence turn signals at the back. How can I do this? Wich resistor do I have to use
My original lights are 10W
I've put the relay link in the the video it's a 6 or 7 pin relay specifically for this Suzuki but it depends on what indicators you have as this is made specifically for indicators without relays the part number is in the add
As I don't receive any money from anyone I don't put links in but I hope this helps www.ebay.co.uk/itm/303611580047. www.ebay.co.uk/itm/373036251635 hopefully these links work and you can get a link to the indicators and the relay
Your music's too loud