Nice work. I was wondering if you are willing to make the dimensions or plans available? Your version seems much more straight forward than others I have seen, so it would be nice to give it a go. Thank you for sharing
Your creations are fantastic but could you PLEASE give measurements for each project when you make the video it would help up your subscribers immensely when we try to build your projects.
So very glad I found you! Immediately downloaded the 1st video I have seen so I can follow along and make the build in my shop. I would pay $$$ to purchase plans, please consider offering this in the future.
As fast as you ran the video I found it difficult to follow so I slowed it down but I still could not follow the work you did here. Don't get me wrong, it is stunning, much better than a purchased one. I could never do this. It was fun to watch you however.
I think the grr-ripper is patented. Making one for yourself shouldn't be an issue but profiting from the intellectual property on a video on a US owned video site might be frowned upon. IANAL.
It's is an excellent inovation of a Pushp - stick into a Push - block to serve all purposes. Can you please make one for me. My name is CHANDAN MAZUMDER an DC I live in New Delhi, the capital of INDIA. How can I contact you personally for this ? Thanks and Regards 😊
Nice. I just didn't like and neither subscribed because it's a bit frustrating watch a video with a project that we have to guess all the measurements and such.
Very good, simple but effective design. I made one this week and am very pleased with the result, and its functionality and safety. Many thanks for sharing your creativity and expertise.
I really enjoy your videos and your knowledge. I am new to your channel but so happy i found you. Creative intelligent and well produced, these are among the finest instructional videos I have seen. Incidentally the hand holds on your cross cut sled are pure genius. Thanks.
Great video. Thanks for sharing. Do you have some drawings with the size of all pieces. If you don't mind could you share those in the video description? Best regards Valentin
I would suggest building this with wood and CA glue and eliminate a lot of the metal hardware. I'd want to eliminate as much risk as possible of hitting a screw or bolt with the saw if I accidentally ran it over the blade. Nice MicroJig copy though.
Glückwunsch !! das ist ein interessantes Teil (sorry bei einem Schweizer antworte ich nur auf Schriftdeutsch, mein Basler Dialekt wäre nicht so gut) Das Ding werde ich mir nachbauen da ich die amerikanischen Plastikteile hasse. In meiner Werkstatt will ab und zu die halbe Familie (alles Südamerikaner) etwas mit helfen und dann wird es gefährlich, denn ich bin der einzige Handwerker der sein Handwerk auch von Grund auf gelernt hat und so habe ich auch Respekt vor den Maschinen. Frage: wo hast Du diesen T-Nut Fräser her (den möchte ich mir bei meiner nächsten Reise in die Schweiz kaufen, das bekomme ich hier in Südamerika nicht
Freut mich wenn es Dir gefällt. Meiner Frau und meiner Tochter ist es zu laut in meiner Werkstatt. Ich habe den T-Nut Fräset in Deutschland bestellt. Ist ein wenig günstiger. Habe ihn hier bei Amazon.de bestellt : www.amazon.de/gp/product/B07F8BDL8P/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
Thanks. I think you mean this one www.amazon.com/Bessey-KLI3-012-12-Inch-Ratcheting-KliKlamp/dp/B00008K2TE/ref=sr_1_47?keywords=bessey+clamp&qid=1573193707&sr=8-47
I’m glad I didn’t see a comment saying to just go buy one. Sure it would be easier, there is some pride in building your own. The big plus with yours is that if it’s not adjusted quite right for the cut and the blade runs into it, the piece that got cut and be easily replaced. I think that if I was going to make one of these, I’d make 2 of them and some spare parts. That way if one gets cut up you have a spare handy to continue. Then when done with the project replace the damaged part with a spare one. And maybe make a wider one or two for better control of larger pieces.
looks great BUT i do agree with the other person. Why no dimensions? i know we can stop and start video while making this but available plans free or what ever is so much more helpful
I use a countersunk drill from Wolfcraft : www.amazon.de/Wolfcraft-2544000-Senkbohrer-mit-Tiefenstopp/dp/B002OHNH16/ref=sr_1_13?__mk_de_DE=ÅMÅŽÕÑ&crid=21TALI39FSR40&keywords=wolfcraft+senker+mit+tiefenstop&qid=1573822399&sprefix=wolfcraft+senker%2Caps%2C161&sr=8-13 . But this one should work in the same way : www.amazon.com/dp/B07KKLCGRY/ref=sr_1_16?__mk_de_DE=ÅMÅŽÕÑ&keywords=countersunk+drill+with+depth+stop&qid=1573822567&sr=8-16 . You just have to choose the one with the diameter you need.
I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
Would love plans for this. :)
great
do you have blueprints for this or at least the measurements for it
Nice work. I was wondering if you are willing to make the dimensions or plans available? Your version seems much more straight forward than others I have seen, so it would be nice to give it a go. Thank you for sharing
Thanks. Maybe i can make plans sometimes.
@@ISIMPLYBUILTIT , thank you. I think there are a few people that would appreciate that
MadAsKiwi i know i would
Me too!
Me three
Your creations are fantastic but could you PLEASE give measurements for each project when you make the video it would help up your subscribers immensely when we try to build your projects.
Guess not..
@@princessanineveh 😂
Should have plans for it…. If not free a little charge for the plans would help out the woodsmiths community.
What material do you use for grip at the base of the push block?
Thanks
So very glad I found you! Immediately downloaded the 1st video I have seen so I can follow along and make the build in my shop. I would pay $$$ to purchase plans, please consider offering this in the future.
As fast as you ran the video I found it difficult to follow so I slowed it down but I still could not follow the work you did here. Don't get me wrong, it is stunning, much better than a purchased one. I could never do this. It was fun to watch you however.
This cool Gripper is waiting on my to do list. Well done!
Any plans for this? Would gladly send some money to you if there were plans for your projects.
is there any chance that you could supply a schematic for this brilliant push block?
Well done!
Do you have any plans for it?
He has plans for safety
Maybe i can make plans sometimes.
I SIMPLY BUILT IT looking foreword for it. I’d love to make one
I think the grr-ripper is patented. Making one for yourself shouldn't be an issue but profiting from the intellectual property on a video on a US owned video site might be frowned upon. IANAL.
His version is not patented…..sorry!
Sehr gut! Like others, wish you had plans. Guess I'll have to design myself. ;-) Danke for the inspiration.
Beautiful construction for a security tool that I really believe is effective. Thanks for sharing.
Thanks
Why is your splitter set so high? Doesn't it only need to be level with the blade?
Possibly to enable installation of a dust guard
Good morning
Do you have the plan of the clamp pusher block please?
Thank you so much.
Beautiful achievement.
It's is an excellent inovation of a Pushp - stick into a Push - block to serve all purposes. Can you please make one for me.
My name is CHANDAN MAZUMDER an DC I live in New Delhi, the capital of INDIA.
How can I contact you personally for this ?
Thanks and Regards 😊
Nice. I just didn't like and neither subscribed because it's a bit frustrating watch a video with a project that we have to guess all the measurements and such.
Please send me measurements, I would like to make one
What size router bit? What width plywood? Thanks in advance. Great video.
Fantastic job, I will try to do it myself. Thank you
do you have the plans available for this push gripper? How about that sanding block? That is really cool.
Hello there. good idea. beautiful device working on a table. congratulations. greetings..
Thank you.
Why so fast? I'm sure anyone serious about this sort of thing would get more info, and enjoyment, = more subs.
Very good, simple but effective design. I made one this week and am very pleased with the result, and its functionality and safety. Many thanks for sharing your creativity and expertise.
I really enjoy your videos and your knowledge. I am new to your channel but so happy i found you. Creative intelligent and well produced, these are among the finest instructional videos I have seen. Incidentally the hand holds on your cross cut sled are pure genius. Thanks.
Thank you so much. I'm glad to read that. I really appreciate that.
I was wanting plans for this if you have them available. Can you please let me know where.
Fantastic job my friend. I will have to watch this a few more times to be capable of making one for myself. Thanks for the great video.
Great video. Thanks for sharing. Do you have some drawings with the size of all pieces. If you don't mind could you share those in the video description?
Best regards Valentin
No i made it without plans. Maybe i can make plans sometimes.
Świetny filmik ! Szkoda tylko, że nie ma podanych wymiarów ...
Do you have any plans for any of your stuff please let me know
Seriously? 😂 I learned SOOOO much!!!! I made the exact same one in as much time as this video ran for. I just followed your steps and kept up!!!
Nice one , LOL
No Talking makes your Videos 80% better ... 👍🏽
Ok. I just speak in more complicated Projects.
I see so many DIY knockoffs of American woodworking products from Europeans. I guess these are very expensive to buy outright?
Pretty expensive to buy a fully optioned Gripper in the U.S. :0)
I love the background sound instead of music. Great edits too.
Any plans available? Tks for sharing
Very nice! What was the material you used to make it grip?
Thanks. It's something like this. www.amazon.com/dp/B07MNW8QR1/ref=sr_1_52?__mk_de_DE=ÅMÅŽÕÑ&crid=ZVYVT0IOIV88&keywords=self+adhesive+acoustic+foam&qid=1573823813&sprefix=self+adhesive+ac%2Caps%2C241&sr=8-52
hello brother a query I write from Venezuela and I congratulate you for all your projects
Thank you so much.
friend good afternoon I can ask you to see if you make several pieces of bone wood "tools can you make ???
Any plans for this push block
Plans would be nice.Thanx.
💥mind blown.....from 6:08 on...My friend, those 11 and I half minutes I just spent here were very well spent. . At the Least. Thank you .
very nice!
grr-rip(per) off :P
Waste of time no plans or size displayed
Could you make available plans or parts list??
Maybe i can make plans sometimes.
Please i need the dimantions in cm.
Thanks
A Grr-Riper push block is $62.00 on Amazon. The time, effort, and money you'd spend on this project to replicate one isn't worth it IMO.
The revenue he made by showing us the video on how he made it ....paid for itself 10x....would have made even more if he made plans to sell
Excelente!, hiciste fabricas la herramienta casera👍.Gracias a tu video inspirado
Gracias. Me alegro si te gusta
Cool! Love to build this one day 😄👍
you forgot to paint it yellow 😁
I would suggest building this with wood and CA glue and eliminate a lot of the metal hardware. I'd want to eliminate as much risk as possible of hitting a screw or bolt with the saw if I accidentally ran it over the blade. Nice MicroJig copy though.
Thanks. I think this screws should not be a problem because they will never came near the blade.
Hope i can have the sizes
Glückwunsch !! das ist ein interessantes Teil (sorry bei einem Schweizer antworte ich nur auf Schriftdeutsch, mein Basler Dialekt wäre nicht so gut) Das Ding werde ich mir nachbauen da ich die amerikanischen Plastikteile hasse. In meiner Werkstatt will ab und zu die halbe Familie (alles Südamerikaner) etwas mit helfen und dann wird es gefährlich, denn ich bin der einzige Handwerker der sein Handwerk auch von Grund auf gelernt hat und so habe ich auch Respekt vor den Maschinen. Frage: wo hast Du diesen T-Nut Fräser her (den möchte ich mir bei meiner nächsten Reise in die Schweiz kaufen, das bekomme ich hier in Südamerika nicht
Freut mich wenn es Dir gefällt. Meiner Frau und meiner Tochter ist es zu laut in meiner Werkstatt. Ich habe den T-Nut Fräset in Deutschland bestellt. Ist ein wenig günstiger. Habe ihn hier bei Amazon.de bestellt : www.amazon.de/gp/product/B07F8BDL8P/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1
Muito bom trabalho...parabéns 😊
Love your channel and everything you build. This is why I watch youtube! Thank you for posting
Thank you so much. I'm glad to read that.
Any plans or dim info?
It's astonishing how many people are asking for plans on a channel called I SIMPLY BUILT IT.
This looks really cool, but are the design documents posted somewhere? It's hard to follow every step from the video. Thanks.
You have the dimensios
Beautiful work as always. What is the name of the clamp with the little black handle?
Thanks. I think you mean this one www.amazon.com/Bessey-KLI3-012-12-Inch-Ratcheting-KliKlamp/dp/B00008K2TE/ref=sr_1_47?keywords=bessey+clamp&qid=1573193707&sr=8-47
I’m glad I didn’t see a comment saying to just go buy one. Sure it would be easier, there is some pride in building your own. The big plus with yours is that if it’s not adjusted quite right for the cut and the blade runs into it, the piece that got cut and be easily replaced. I think that if I was going to make one of these, I’d make 2 of them and some spare parts. That way if one gets cut up you have a spare handy to continue. Then when done with the project replace the damaged part with a spare one. And maybe make a wider one or two for better control of larger pieces.
looks great BUT i do agree with the other person. Why no dimensions? i know we can stop and start video while making this but available plans free or what ever is so much more helpful
Make the plans ! Lol
It would be nice if you explained the what and why of what you are doing, speed pictures just doesn’t make it!
As Norm would say, how about a measured drawing? Great video other than no actual instructions. LOL
New subcriber because of this video, thank you very much for sharing, you just save me a fortune. :)
cool idea, thanks :)
Got to think ya can’t give out plans without breaking pattens or Copyright laws of some sort.
Great review may i ask what type of countersunk drill bit you used on the bosch drill please.
I use a countersunk drill from Wolfcraft : www.amazon.de/Wolfcraft-2544000-Senkbohrer-mit-Tiefenstopp/dp/B002OHNH16/ref=sr_1_13?__mk_de_DE=ÅMÅŽÕÑ&crid=21TALI39FSR40&keywords=wolfcraft+senker+mit+tiefenstop&qid=1573822399&sprefix=wolfcraft+senker%2Caps%2C161&sr=8-13 . But this one should work in the same way : www.amazon.com/dp/B07KKLCGRY/ref=sr_1_16?__mk_de_DE=ÅMÅŽÕÑ&keywords=countersunk+drill+with+depth+stop&qid=1573822567&sr=8-16 . You just have to choose the one with the diameter you need.
@@ISIMPLYBUILTIT Thanks a lot
What anti slip material did you use plss. TIA
I ordered it from Amazon.de : www.amazon.de/gp/product/B00BSAAB1E/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 . Maybe this from Amazon.com could work : www.amazon.com/Weather-Density-Adhesive-Weatherstrip-Insulation/dp/B07477J8KL/ref=sr_1_17?crid=16MTA9VZIZDN9&keywords=self+adhesive+sealing+strip+tape&qid=1573193947&sprefix=self+adhesive+seal%2Caps%2C227&sr=8-17
I made 2 lov them
i like this project, but i got 2 questions for you. nr.1. is that ander 1 you built and nr.2. do you have plans for both of them?
Nice Push block & (Sanding block at 5:16). I gotta find the video to make one of those! :)
Really nice project!
Thanks.
I wish I could order the available plans.Great Gripper. Tks a lot
How many people were also distracted by that amazing homemade sanding block he has?
I dont like video without spoken comments. Too boring. I didnt watch to the end.
Very nicely done, as always!
Thanks.
yeeeaaaaahhhh
nice
now that is impressive! i will try to build one of those one day
Thanks
OTTIMO VIDEO.
ESAUSTIVO E INTERESSANTE NELLE SEGUEZE VIDEO.
SALUTI
SALVIO
Very Very Nice! New project for the summer when I can get into my garage! Too cold here in Minnesota right now! :)
Nice idea on table saw sled for hand holes. They definitely keep hands away from blade.
Amazing job, gave me a bit of anxiety at the very end though near that blade.
great vid and build, thanks
Sell one? I’m new to using my table saw, how much?
It's cheaper to buy one that the cost of ply in Canada
That is so similar to the ones I made that I thought it was the same at first. Great job.
Thanks
Do you have plans for this push block.
Another great video. Real pleasure watching you work!!!
Thank you so much. I'm glad to read that.
Hi.. Was there ever any plans for this done?
Great work! Thank you for sharing!
Thanks
Brilliant!
Thank you.
Nicely done, how you call this router bit type ?
Thanks. It's a T-Nut Router Bit
Sometimes called a key-hole bit too.
Another good one my friend.
Thank you.
Great video nice ideal 👍
Thanks
Nice job. New subscriber
Thanks.
Great Build Sir.👍😁
Thanks.
Excellent. Very well done.
Thanks.