Nice fence rider, well-executed and good video showing it, but IMO it only works as a safe push stick for narrow cuts. If you're cutting anything wider, you're pushing the wrong corner. Why? Place a book on your kitchen countertop, and push the left corner. The book rotates to the right, which on a cut would be into the fence, where it's safe. Now push on the right corner of the book, where this jig pushes the workpiece. The book rotates to the left, which on a cut would be into the blade, causing it to walk up onto a tooth and kick back. How about instead of attaching a push stick to the fence rider, you attach the right edge of a mini sled to it, say a 20cm square with a small fence on the edge of it that's toward you? A sled's always a good pusher, and guiding it with a fence rider has the advantage of not having to cut miter slot runners for the sled. Just a thought.
thank you 😀 ..yes of course... this push block has been designed for small pieces where a normal push stick is difficult to get between the fence and the saw blade. 🤓👍 ...and yes, I have to admit that I also like to use it for wider pieces... because it works so well. I didn't think at that moment that I couldn't take the pusher with wider pieces. 😳 🤔 Thank you so much for pointing that out. I'll have to take care of it in the future. 👌😀 The idea of making a little sled with a fence rider is great. thank you for that. 🤓 I'm gonna build something like this fast. 😀👍
thank you 😀🖐 You mean like this one?😉 ruclips.net/video/JkBTo-3LiJU/видео.html I also made an update video for it, so that you don't have to change the two boards all the time: ruclips.net/video/Xa4dA3rrWt4/видео.html 😀🖐
Hi Thorsten! Cooles Jig 😂 Das baue ich mir nächstes Jahr nach. 😊 Liebe Grüße, Dieter Ich wünsche Dir und deiner Familie ein friedvolles Weihnachtsfest 🎄
Hi Dieter, vielen Dank 😀🖐 guck dir vorher aber unbedingt noch mein Update Video dazu an: ruclips.net/video/Xa4dA3rrWt4/видео.html Ich wünsche euch auch ein schönes Weihnachtsfest.
Habe ich schon gemacht! Leider kann ich das Update nicht umsetzen da ich einen anderen Anschlag habe wie du. Bei mir geht die andere Seite nicht bis zur Tischplatte. Aber die erste Version ist für mich ganz o. k. 😊
Excellent! It appears that you have a top class table saw design already so I am surprised that company didn't have the solution as part of their design. You should submit your design to them to do in aluminum with a waste wood insert at the bottom. In any event great job!
I truly appreciate your tutorial. Practical device for proud full skilled wood workers. Have you put plan on how to make this device? Without a doubt many carpenters would appreciate this plans
vielen Dank 😀 , ja, werde ich machen 😀 . Nicht alle Ideen sind von mir. Ich lasse mich auch von anderen RUclipsrn oder Pinterest inspirieren 😉 . Das hier war jetzt eine Optimierung und Verschmelzung verschiedener Ideen.
vielen Dank 😀🖐 Ich habe die hier gefunden: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?var=552362696921&epid=4008638852&hash=item3af6638754:m:m3D5N_1P5f_PoTlZWcXx45w
Excellent, but as a suggestion, you should put the name of each of the items you use, if possible, or if you have done so, put the links for your purchase on Amazon, such as the knobs, I loved them but I can't find their correct name and acquire them
thank you 😀🖐 The List of my machines are linked on my website to amazon. The thumb screws are unfortunately not available on Amazon. I found these on eBay: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?epid=4008638852&hash=item3af6638754:g:afQAAOSwdSRZ~Xmo 😀🖐
Thank you 😀🖐 Before you uild this, make sure to watch my Update Video to that Push Block: ruclips.net/video/Xa4dA3rrWt4/видео.html I found these Brass Knobs on eBay: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?var=552362696921&epid=4008638852 😀🖐
Nice job. May I suggest a modification? Just one groove&knob mid-way should be enough (you just loosen it and let the wood block "fall" on the piece to cut and then tie the knob), so you can make the wood "wall" of two different width: one like you did, for "normal" cuts and the opposite side much thinner for very thin cuts and you can change them just by loosening the knob and rotate the block upside down. Just my 2c. Ciao.
thank you 😀 and yes... thats such a great idea.. 😀👍 I think with only one knob I have to attach grip tape in the inner vertical block. But the idea is great... 👌 I think I will make an update video for your idea.. can I show your comment in the video? 🙂🖐
Why wouldn't it work? I will build the update as a completely new push block. If it doesn't work then I still have my original push block available. 😀👍 The video with your comment will of course only come online if it has worked. 😉
thank you 😁 and have fun... I got an idea for an optimisation of this jig. Maybe its an option to mount the second, changeable part directly to the other side.. instead of the backside. then you dont need to change it.. you just can turn it around.
HI. I love this idea and I am thinking in build one for me. Can you tell me where can I buy those brass nuts you use in several of your projects? Thank you.
I was already planning to build a push block, but I'll make this one instead. It looks effective and simple, thanks for the idea and love your video. I just subscribed 😊👍
Thank you 😀🖐 before you build it, whatch my Major Update to this Push Block: ruclips.net/video/Xa4dA3rrWt4/видео.html The new one makes Plate changing unnecessary. You can use it from both Sides. 😀🖐
Das egalisiert diese unhandlichen Schiebestöcke... zumindest bis zu einer gewissen Stärke. Und während man sich dieses Video anschaut, denkt man sich... warum kommt man eigentlich nicht selber auf diese Idee? Ist ja keine Raketenwissenschaft. Aber trotzdem genial. Vielen Dank dafür. :)
Da ich schon meine zehn Finger ausgepackt habe, um vermeidlich längere Texte zu tippen, möchte ich kurz etwas total unwichtiges anmerken. Im ersten Teil des Videos habe ich, dank der Musikauswahl (und vielleicht auch wegen der Anzahl gesprochener Worte), auf Auftritte von Charlie Chaplin, Dick und Doof oder anderer Stummfilm-Stars gewartet. Das Video war also nicht nur enorm lehrreich, sondern auch noch erstaunlich unterhaltsam... ;)
@@thosa thank you did you find everything was accurate fence mitre gauge etc. Planning on building a multi purpose work station grateful for any advice
Adorei, só vale lembrar que caso a distância entre o disco e a barreira for grande e a maquina não possuir splitter isto não deve ser usado pois aplicar força na extremidade da madeira tende a rotacionar a mesma podendo causar kickback. mas com certeza vou fazer um para mim.
Man, what a great idea! And awesome implementation. One question: what is your table saw? Sorry if you've already listed it, I don't know enough German to figure it out :)
Grüss Dich Thosa, ein echt cooles geniales Teil für die TKS. Hast du super gemacht. Gefällt mir sehr gut. Daumen hoch. Die Musik am Anfang hat mir auch sehr gut gefallen. Lg Peter, Leimi´s Werkstatt
😪that version of the saw is not available in the USA, the model available here doesn’t have the sled like yours or the oversized mitre sled. I have a large Delta and I’m very happy with it but I had to make many of the features that seem to have come stock on yours (like your mitre and a crosscut sled) and I like that it’s portable. Mine weighs about 350 pounds.
thank you 😀 I got a simpler idea for that from pinterest and optimezed it for my needs 🤓 the Grrrriper is a bit better for use without a fence.. I plan to rebuild a Grrrriper Version from plywood... 😀 the saw ist this one: Bosch Professional GTS 10 XC amzn.to/2v6JfZC
i haven't been saw shopping for a long time, but i've never seen one with a bed like that... what is brand? you'd think they would ALL have them since every single one of us has had to build a sled!
Nice fence rider, well-executed and good video showing it, but IMO it only works as a safe push stick for narrow cuts. If you're cutting anything wider, you're pushing the wrong corner. Why? Place a book on your kitchen countertop, and push the left corner. The book rotates to the right, which on a cut would be into the fence, where it's safe. Now push on the right corner of the book, where this jig pushes the workpiece. The book rotates to the left, which on a cut would be into the blade, causing it to walk up onto a tooth and kick back.
How about instead of attaching a push stick to the fence rider, you attach the right edge of a mini sled to it, say a 20cm square with a small fence on the edge of it that's toward you? A sled's always a good pusher, and guiding it with a fence rider has the advantage of not having to cut miter slot runners for the sled. Just a thought.
thank you 😀 ..yes of course... this push block has been designed for small pieces where a normal push stick is difficult to get between the fence and the saw blade. 🤓👍 ...and yes, I have to admit that I also like to use it for wider pieces... because it works so well. I didn't think at that moment that I couldn't take the pusher with wider pieces. 😳 🤔 Thank you so much for pointing that out. I'll have to take care of it in the future. 👌😀 The idea of making a little sled with a fence rider is great. thank you for that. 🤓 I'm gonna build something like this fast. 😀👍
@@thosa Great! And I'll look forward to your video! 😀
Push Blocks that are made to fit over the guide are the best and safest! Great one !
😊👍
Das ist ja mal klasse, habe schon viele schiebehalter gesehen, aber noch nie so durchdacht und mit so viel Sicherheit.
Klasse!!!🙂
vielen Dank 😁 ...ich hab mir auch viele angesehen und dann diesen entworfen... Ich lege viel Wert auf Sicherheit 😁
Great jig/ push stick for narrow rips. As a fellow Bosch table saw owner this is on my short list of projects
thank you 😀🖐 but before you build this jig, make sure to watch my update to this puch block: ruclips.net/video/Xa4dA3rrWt4/видео.html 😀🖐
Wow what a simple but amazing idea. This definitely the best push block idea I have ever seen. Nice job, friend
thanks alot man 😀 share it with your friends if you like 😉😀
Best push stick I ever saw. Really cool!
thank you 😀🖐
thosa 👍🏻😊
Nice design. Thanks for sharing! I would imagine one could make a thinner plate to use to push thinner pieces through. Very versatile.
thank you 😀🖐 You mean like this one?😉 ruclips.net/video/JkBTo-3LiJU/видео.html I also made an update video for it, so that you don't have to change the two boards all the time: ruclips.net/video/Xa4dA3rrWt4/видео.html 😀🖐
Wow that’s totally awesome well done
thank you 😀🖐
Excellent build. As always thanks for sharing
thank you 😀🖐
Hi Thorsten! Cooles Jig 😂 Das baue ich mir nächstes Jahr nach. 😊 Liebe Grüße, Dieter
Ich wünsche Dir und deiner Familie ein friedvolles Weihnachtsfest 🎄
Hi Dieter, vielen Dank 😀🖐 guck dir vorher aber unbedingt noch mein Update Video dazu an: ruclips.net/video/Xa4dA3rrWt4/видео.html Ich wünsche euch auch ein schönes Weihnachtsfest.
Habe ich schon gemacht! Leider kann ich das Update nicht umsetzen da ich einen anderen Anschlag habe wie du. Bei mir geht die andere Seite nicht bis zur Tischplatte. Aber die erste Version ist für mich ganz o. k. 😊
I like the table saw and like to know the name brand please, of course I also like the push block and the fact it's adjustable.
thank you 🙈 You can find a list of my machines on my website: www.thosa.info/workshop_machines_and_tools/ 😀🖐
Great build and a well done video. And FINALLY, some decent music!
Is it right for all applications? No. Is it meant to be? No! Great fence rider.
Thank you 😀🖐 It's for small Pieces only. Wider Pieces begin to rotate.
A very clever jig-I’ve not seen one like it before...I WILL make one for my table saw. Danke!
thank you 😊
Wow, das Ding hat "Patentqualität", ehrlich!
Und übrigens, sehr coole Musik!
oh vielen Dank 😊
Ein sehr schönes und gut konstruiertes Tool für die TKS. Daumen hoch 👍 LG Julio
vielen Dank 😊
you give me great ideas thank you love the push block
I really like my microjig push blocks. But I HAVE to make one of these. So much more useful. Couldn't find the plans. But I can improvise.
thank you 😀🖐 there is no plan for this, because the thing has to be adapted individually for each circular saw.
thosa your videos are great. And helpful enough to point me in the right direction to make one for my table saw. Thank you for sharing!!!
You made some dangerous cuts!!
maybe ..
Coole Idee. Werde ich mir auch anfertigen.
viel Spaß 😊
Coole Idee
Und sauber umgesetzt.
Sieht super aus.
vielen Dank 😊
Brilliant Design.
thank you 😊
Excellent! It appears that you have a top class table saw design already so I am surprised that company didn't have the solution as part of their design. You should submit your design to them to do in aluminum with a waste wood insert at the bottom. In any event great job!
thank you 😁 ..yes Im very happy with that table saw.
Very nice and simple. Youve earned another subscriber. thanks.
thank you 😊 and welcome 😁
I truly appreciate your tutorial. Practical device for proud full skilled wood workers. Have you put plan on how to make this device? Without a doubt many carpenters would appreciate this plans
thank you 😀🖐 Yes, the plan is available on my website. 😀👍
Mach weiter so bau ich mir nach finde deine Ideen super
vielen Dank 😀 , ja, werde ich machen 😀 . Nicht alle Ideen sind von mir. Ich lasse mich auch von anderen RUclipsrn oder Pinterest inspirieren 😉 . Das hier war jetzt eine Optimierung und Verschmelzung verschiedener Ideen.
Very nice idea
thank you 😀
Hallo Thosa sehr schöne Idee und sehr schöne Arbeit.
Gruß Markus
vielen Dank 😊
Really nice, thosa!
thank you 😀
Encore une belle réalisation Thorsten !! Merci .Ou avez vous trouvé les écrous moleté laiton svp ?
vielen Dank 😀🖐 Ich habe die hier gefunden: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?var=552362696921&epid=4008638852&hash=item3af6638754:m:m3D5N_1P5f_PoTlZWcXx45w
Ja ..... da kann ich auch nur sagen „top Idee“ und ....... nachbauen. ;-)
vielen Dank und viel Spaß beim Nachbauen 😊
Excellent, but as a suggestion, you should put the name of each of the items you use, if possible, or if you have done so, put the links for your purchase on Amazon, such as the knobs, I loved them but I can't find their correct name and acquire them
thank you 😀🖐 The List of my machines are linked on my website to amazon. The thumb screws are unfortunately not available on Amazon. I found these on eBay: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?epid=4008638852&hash=item3af6638754:g:afQAAOSwdSRZ~Xmo 😀🖐
@@thosa
perfect, with the name you provided me I found something very similar in Amazon EU, thanks for the help
😀👍
Klasse Idee und super umgesetzt
Great Tutorial well done, Thank You. Could you pls tell me where you purchased the brass knobs ?
Thank you 😀🖐 Before you uild this, make sure to watch my Update Video to that Push Block: ruclips.net/video/Xa4dA3rrWt4/видео.html I found these Brass Knobs on eBay: www.ebay.de/itm/Randelmutter-hoch-M3-4-5-6-8-10-Messing-DIN-466-Randelmuttern/253241821012?var=552362696921&epid=4008638852 😀🖐
Fantastic! 5 stars!
thank you 😀🖐 I've got an Update Video to this Push Block: ruclips.net/video/Xa4dA3rrWt4/видео.html 😀🖐
exellent design but the quesation i have is where did you get the brass nuts for the adjustment?
by the way new to your channel, but love it already
thank you 😁 the brass nuts are from eBay. Thats great 😁 ... welcome and have fun 😊
Love the built in cross cut sled. What make is the table saw?
thats a Bosch Professional GTS 10 xc
Bosh gts10 table saw
Nice job. May I suggest a modification? Just one groove&knob mid-way should be enough (you just loosen it and let the wood block "fall" on the piece to cut and then tie the knob), so you can make the wood "wall" of two different width: one like you did, for "normal" cuts and the opposite side much thinner for very thin cuts and you can change them just by loosening the knob and rotate the block upside down. Just my 2c. Ciao.
thank you 😀 and yes... thats such a great idea.. 😀👍 I think with only one knob I have to attach grip tape in the inner vertical block. But the idea is great... 👌 I think I will make an update video for your idea.. can I show your comment in the video? 🙂🖐
@@thosa Yes. But first check it works! :-) If so, I'll make it too.
Why wouldn't it work? I will build the update as a completely new push block.
If it doesn't work then I still have my original push block available. 😀👍
The video with your comment will of course only come online if it has worked. 😉
Nice thank you
thank you 😊🖐
I like this jig very much; I’m building one today! 🙂
thank you 😁 and have fun... I got an idea for an optimisation of this jig. Maybe its an option to mount the second, changeable part directly to the other side.. instead of the backside. then you dont need to change it.. you just can turn it around.
HI. I love this idea and I am thinking in build one for me. Can you tell me where can I buy those brass nuts you use in several of your projects? Thank you.
hi, thank you 😀🖐 I have found it on eBay... 😀🖐
@@thosa Thank you very much. Found it.
😀👍🖐
I was already planning to build a push block, but I'll make this one instead. It looks effective and simple, thanks for the idea and love your video.
I just subscribed 😊👍
Thank you 😀🖐 before you build it, whatch my Major Update to this Push Block: ruclips.net/video/Xa4dA3rrWt4/видео.html The new one makes Plate changing unnecessary. You can use it from both Sides. 😀🖐
@@thosa wow thanks it's even better than the 1st. I already bought the materials to make one, thanks a lot I really appreciate it
You're welcome..😀. have fun 😀🖐
Das egalisiert diese unhandlichen Schiebestöcke... zumindest bis zu einer gewissen Stärke. Und während man sich dieses Video anschaut, denkt man sich... warum kommt man eigentlich nicht selber auf diese Idee? Ist ja keine Raketenwissenschaft. Aber trotzdem genial. Vielen Dank dafür. :)
vielen Dank 😁🖐 Ja. zumindest für schmale Streifen ist dieses Teil hervorragend geeignet..😊 Mein absolutes Lieblingstool mittlerweile.. 👍😊
Da ich schon meine zehn Finger ausgepackt habe, um vermeidlich längere Texte zu tippen, möchte ich kurz etwas total unwichtiges anmerken. Im ersten Teil des Videos habe ich, dank der Musikauswahl (und vielleicht auch wegen der Anzahl gesprochener Worte), auf Auftritte von Charlie Chaplin, Dick und Doof oder anderer Stummfilm-Stars gewartet. Das Video war also nicht nur enorm lehrreich, sondern auch noch erstaunlich unterhaltsam... ;)
vielen Dank 😁🖐 das sollen sie auch sein
😊
Great push block! May make one with 1/8" first layer of plastic for very thin slices. Think of dado stack for slicing boards.
thank you 😁...I will made a separate Tool for those thin pieces.. like slicing to veneer...
Hey great idea what table saw u got if you don't mind me asking
thank you 😀🖐 Its a Bosch Professional GTS 10 XC amzn.to/2v6JfZC
@@thosa thank you did you find everything was accurate fence mitre gauge etc. Planning on building a multi purpose work station grateful for any advice
Yes Im very happy with the Table Saw
@@thosa thank you for your input much appreciated
Bell idea..complimenti ottimo progetto
I loved your idea. Work very nice. I made one, Thanks so much.
thank you 😊
Sehr innovativ! Kommt auf meine Nachbauliste... ;))
vielen Dank und viel Spaß beim Nachbauen 😊
What model bosch table saw is that, that you are using?
this one : Bosch Professional GTS 10 XC + GT: amzn.to/2v6JfZC ( all Tools and Camera Equipment are linked in the Video Description )
Great job!! thanks for share it
thank you 😊🖐 I'm going to make an Update Video to this Jig 😁👍
Sehr cool und Mega praktisch. Daumen hoch 😎
vielen Dank 😊
Sehr coole Idee..!
vielen Dank 😀🖐
Extrem gute Idee!!
vielen Dank 😊
Super Idee!
vielen Dank 😊
Great build, mate 👍
For a fraction of the cost👌
thank you 😊
Adorei, só vale lembrar que caso a distância entre o disco e a barreira for grande e a maquina não possuir splitter isto não deve ser usado pois aplicar força na extremidade da madeira tende a rotacionar a mesma podendo causar kickback. mas com certeza vou fazer um para mim.
thank you 😀 .. yes, I'm very glad that I finally have a machine with splitting wedge. have fun rebuilding it 😀
Great,juist een gemaakt,top!!
thank you 😁
no more scare for my fingers,thanks!!
Ein sehr schönes tool, genial konstruktiert ! Was is deine Kreissäge model ? Gruss
vielen Dank 😊 das ist eine Bosch Professional GTS 10 xc. Das Sägeblatt ist n Freud LP30M.
danke :)
I thought you’re not supposed to have the wood touch the fence if you use the miter? Or it could bind?????
yes, that's right 👍
super, da gefällt mir gut, top !!!
vielen Dank 😀🖐
Ein super Tool! 👍
jaa 😊
so lucky to have sliding table option. we are behind in the US.
Isn't that a Bosch? I believe you can buy that in the US.
Thanks.👍🇬🇧
Really useful for narrow pieces, thanks! I'm impressed with your table saw, who is the manufacturer?
thank you 😀🖐 Its a Bosch Professional GTS 10 XC : amzn.to/2v6JfZC 😀👍
like the push block guess will build one are you using 1/2 plywood?
thank you. I use 18mm for the handle, 20mm the one attached to the handle, 12mm the solid side, and for the changeable holding parts 18mm & 6.5mm
Super Idee, sehr gute Arbeit ! 👍
vielen Dank 😁
excelente
Asuperb idea for DIY!!!!
thank you 😊
Great! I must make one
thank you 😊
Muito bom, prático e ajuda bastante a segurança das mãos.
Thank you 😀🖐 Please make sure to watch my Update Video to this Push Block before rebuild this: ruclips.net/video/Xa4dA3rrWt4/видео.html 😀👍
Top class, thank you.
thank you 😁🖐
Mag switch and gripper work for me thanks though
😊👍
Perfect.👏👏👏🤝
thank you 😀🖐
Man, what a great idea! And awesome implementation. One question: what is your table saw? Sorry if you've already listed it, I don't know enough German to figure it out :)
thank you 😁 I have the Bosch Professional GTS 10 xc. The red blade is a Freud from Italy
Grüss Dich Thosa,
ein echt cooles geniales Teil für die TKS. Hast du super gemacht. Gefällt mir sehr gut. Daumen hoch.
Die Musik am Anfang hat mir auch sehr gut gefallen.
Lg Peter, Leimi´s Werkstatt
Grüß dich 🙋♂️ vielen Dank 😊 ...die zweite Musik nicht mehr? Ich fand die für die Endszene passender.. 😁
für die endszene passender, aber mein geschmack ist es nicht so.
aber da höre ich halt dann weg. bzw. schalte meine ohren auf durchzug *gggggg*
I have seen a few of these pushers over the years and i like that yours is adjustable.
I also love your table saw, what type is it.
its a Bosch Professional GTS 10 XC : amzn.to/2v6JfZC 😀🖐
😪that version of the saw is not available in the USA, the model available here doesn’t have the sled like yours or the oversized mitre sled. I have a large Delta and I’m very happy with it but I had to make many of the features that seem to have come stock on yours (like your mitre and a crosscut sled) and I like that it’s portable. Mine weighs about 350 pounds.
😥
What sliding miter apparatus is that?
The wood part I built is my push block.. The aluminium part is the rip fence of my circular saw. 😀🖐
Excelente idea !!!!
thank you 😊
Awesome 👍
thank you 😊
Nice jig...almost like Grrrriper ;) What table saw is that?
thank you 😀 I got a simpler idea for that from pinterest and optimezed it for my needs 🤓 the Grrrriper is a bit better for use without a fence.. I plan to rebuild a Grrrriper Version from plywood... 😀 the saw ist this one: Bosch Professional GTS 10 XC
amzn.to/2v6JfZC
i haven't been saw shopping for a long time, but i've never seen one with a bed like that... what is brand? you'd think they would ALL have them since every single one of us has had to build a sled!
Its a Bosch Professional GTS 10 xc 🙂 ... I still built a complete cross cut sled as well. There is no better way to saw small parts. 👍
Great saw. Some minor issues with slight wobble on the mitre attachment, but easily fixed.@@thosa
hola DY thosa que paso con los vídeos de la mesa de trabajo la estoy realizando y ya no aparecen
hi, 😀🖐 Welches Video meinst du genau?
Sehr gut!!
vielen Dank 😁
Voll korrekt👍👍
😊
Ja hallo, das ja ne Mega Idee 👍 👍 👍 klasse Super video. Gruß Martin
vielen Dank 😁
Super
thank you 😀🖐
coole idee. was noch fehlt ist eine null spalt einlegeplatte. das loch ist definitiv zu gross für die kleinen sachen.
vielen Dank 😊 ..ja auf jeden Fall 👍 ..ging auch erstmal ums Prinzip 😊
Complimenti thosa ... mi puoi dire la marca del banco Sega e se puoi quanto costa ?? Grazie e ancora complimenti per il gig..😊
vielen Dank 😀 Das ist eine Bosch Professional GTS 10 xc .. kostet aktuell 897€ Ich habe die in der Videobeschreibung verlinkt: amzn.to/2v6JfZC
Bien merecido tu like maestro!!!
vielen Dank 😀🖐
Muy bueno.
vielen Dank 😀🖐
Hi Thorsten, klasse Projekt ;-)
Wo bekomme ich die Rändelmuttern her ?
Gruß
vielen Dank 😀 Die habe ich bei eBay bestellt. Das sind Messing M6.
Danke Dir :-D
muy buena idea ahi va mi like y suscrito
thank you and have fun on my channel 😊
Coole Idee
vielen Dank 😊
Nice
thank you 😊
den bau ich mir nach, wieso kommt man nicht selber auf die einfachsten DInge, danke fürs Video
viel Spaß beim Nachbauen. 😊🖐
Genial!!
vielen Dank 😊
Precisión👌!!
thank you 😊
like to use forstiner bits for radius in projects
ummm whats your tablesaw
?
Bosch Professional GTS 10 xc
Muito bom!!!
thank you 😊
muito fixe
😊👍