I'm loving the Classic more and more. It's come so far since I started following your channel on video 1. I can only imagine how excited you are about everything you've done. You should absolutely be proud of it. You're making sure it stays in excellent shape to make you that money! Hope you're doing good, Armin!
can I give you some advice and save u alot of grief. get a can of kleenflow antiseize compound and put that on all nuts and bolts especially if you may have to go there again. especially on exhaust manifold bolts. l know l'm a mechanic and it saves alot of time & money when things twist off and you have to drill and tap stuff.
Hey 👋 love your videos. I been trying to buy this manifold from PAI but they telling me to buy from them I got to a distributer. Can u please send the distributer you used so I could order it. Thanks bro… keep making great videos and helping
I. Know this is a yr old. But how does it perform. And all those diecast manifold suk. I just took off factory manifold on a 2005 magnum RT caz it warped and broke the stud. So a set of shorties took its place. That manifold looks nice..
Exhaust temperature (egt). Not coolant temperature. That is preset by ecm or stats depending on year and setup. Either way the exhaust manifold isn't going to change the coolant temperature. Just EGTs. I run a full tilt manifold on my detroit.
@@TruckerAK yea maybe in a perfect world it might lol have to always take what they say with a grain of salt. Guys that do the marketing are not drivers or mechanics lol
hey trucker ak love the channel. was wondering info on your truck with landstar just had interview and they said truck has to be 2001 eld complaint ..what is yours thanks and keep up the good work
For my experience full tilt is way better I installed one on my Detroit 12.7 with a stage 1 borg warner turbo and I love it but is all depends on how much you want to spend.
Hi Trucker AK , I have a 2005 Detroit Diesel 14.0L and I haven't been able to figure out which of these would be the best fit, 681125HP or 681127HP so maybe you have the knowledge that can help me on that? Thank you in advance !!!
No one compared the size of the ports which give better air flow as well as smooth inside the manifold I look on you tube no one has compared it to stock manifold pai or Pdi
Just double checking, was the total kit $800? Or was that just the manifold? Also, I contacted PAI to check cost and they were not able to help me since I am not a dealer. Do you know who I could purchase the kit through? Thanks for your time.
Man my experience with PAI was a freaking disaster. I called them after seeing your vid and told them I wanted an exhaust manifold for my 2015 Columbia. Even gave them the engine serial number. The guy gave me the part number and price so I approved the purchase. M&D Distributors is who shipped it and low and behold it was the wrong freaking part. Because the old manifold and gaskets came off and there's a freaking month out on a gasket kit I had no choice but to use the new hardware to button up my truck. Called PAI and a clueless rep lady couldn't even pull up the P.O. number. Luckily M&D Distributors is working with me to figure this out. They told me to contact the distributors from now on when ordering parts.
600 is cool but diesel control service now does a 3 program ECM, matched to your engine. Turn a knob and you can have any power rating from 430hp, all the way up to 780hp. I have 430, 550 and 720.
I slapped a 171702 on my S60 12.7L without additional "tune" and I noticed my boost dropped from max 35psi on waste gated stock, to 30psi max. ..... What gives? 🤔
@@johnkovac4436 I already fixed that. It was the 3-piece exhaust manifold leaking. Once I swapped in the 1-piece from PDI .... No more exhaust leaks. I hit 35psi easy. Fuel econ @ 7.5mpg IFTA now even with 43.5K in the reefer box
When you going to the light work on your on truck yourself instead of being in a hurry to talk about what a person need to do lead by example instead of letting your buddy do your work right.
Hello there bud. I'm really proud of you. I know you don't know me but I always love to see young men and women succeed at everything they do.
you seem like a really cool and down-to-earth cat!
Always pre oil the turbo before mounting! Sand the surfaces where the sealings are being placed.
What number sandpaper would be best to do this
Love your videos!! Keep up the great work!!
I'm loving the Classic more and more. It's come so far since I started following your channel on video 1.
I can only imagine how excited you are about everything you've done. You should absolutely be proud of it. You're making sure it stays in excellent shape to make you that money!
Hope you're doing good, Armin!
That sounds awesome now and she looks sick with the new visor and the stacks make her more better then the other classic XL on the roads
Hiiee....super cool 😎 how "to do it" video up close and step by step. Excellent, guys n' gales would be great to hear now 👍
one more thing done for your truck and one more step to having it the way you want it done. Good job cant wait to see how it ends up done.
whats the followup on how this manifold performs egt temps and performance
WoW - Keep On Trucking the dynamic duo - thanks for the info !!!!
can I give you some advice and save u alot of grief. get a can of kleenflow antiseize compound and put that on all nuts and bolts especially if you may have to go there again. especially on exhaust manifold bolts. l know l'm a mechanic and it saves alot of time & money when things twist off and you have to drill and tap stuff.
I'm with you on that one. My biggest nightmare broken exhaust bolts were ISXs.
Hell ya man. Love seeing new parts put on the truck. Your killing it bro
I love what you did to the truck.
Hi awesome video and great to be seeing you more truck looking great loon 🏴🏴🏴
Looks good. You’re lucky you have a Detroit in there. It’s a nightmare job on a CM871 and you need the computer to set the VGT..... sucks
Just saw you in Tulsa Oklahoma
Sweet ride!!! Take it easy bro
That visor is cool asf
Thanks man
Learned some New parts 💯 Appreciate that.
Man I love how you are always looking to up grade stuff on your truck.
Love Detroit 12.7’s. After your review I may purchase one
Hey 👋 love your videos. I been trying to buy this manifold from PAI but they telling me to buy from them I got to a distributer. Can u please send the distributer you used so I could order it. Thanks bro… keep making great videos and helping
U now its going to work bro. Also when r u going to put on your custom interior door panels. Truck looks great.
Yes bring on the door panels lol. Truck looks great keep it up
I. Know this is a yr old. But how does it perform. And all those diecast manifold suk. I just took off factory manifold on a 2005 magnum RT caz it warped and broke the stud. So a set of shorties took its place. That manifold looks nice..
Exhaust temperature (egt). Not coolant temperature. That is preset by ecm or stats depending on year and setup. Either way the exhaust manifold isn't going to change the coolant temperature. Just EGTs. I run a full tilt manifold on my detroit.
Yeah my mistake I meant to say pyro meter readings but from what was said it says your engine will run a couple degrees cooler so we will see
@@TruckerAK yea maybe in a perfect world it might lol have to always take what they say with a grain of salt. Guys that do the marketing are not drivers or mechanics lol
@@02blackLightning 💯💯
My egt runs @ 6-700deg on cruise with stock manifold, on level ground. Where does yours run @?
AWESOME VIDEO!!! It probably wont lower you engine temps but it will lower egts and help with horsepower! Keep up the good work brotha
hey trucker ak love the channel. was wondering info on your truck with landstar just had interview and they said truck has to be 2001 eld complaint ..what is yours thanks and keep up the good work
That's interesting, I wonder if that's a better option then full tilt.
For my experience full tilt is way better I installed one on my Detroit 12.7 with a stage 1 borg warner turbo and I love it but is all depends on how much you want to spend.
@@bebeturbo1
I run full tilt my self with pitsburg power stage 1 and tune, 600hp out of my 12.7 it's incredible.
Yea full tilt is the way to go. I run one on my 3406E.
Hi Trucker AK , I have a 2005 Detroit Diesel 14.0L and I haven't been able to figure out which of these would be the best fit, 681125HP or 681127HP so maybe you have the knowledge that can help me on that?
Thank you in advance !!!
1125😊
Looks good brother! Seriously considering buying a classic... Hopefully soon! I am also from Florida and it would be cool to collaborate one day.
it sounds smoother 👍🎯
Interesting clip, thanks for that.
Nothing to it but to do it. The only time I let a shop work on my trucks was when I didn't have time or I was just plain lazy
Looking on to how to upgrade my manifold and bam I see Minel :)
@Trucker Ak were u losing power before u change manifold?
Who do you order from?, seems like I can't buy it in the pai website
Definitely not gonna lower the engine temp that done through coolant. Now EGT maybe.
LoL 😂 fyi, some people have no idea about engine temp vs egt temp.
If your egt is high going up a really long mountain your coolant temp will go up eventually just saying.
Great video...as always.
Keep safe , love the vids!
No one compared the size of the ports which give better air flow as well as smooth inside the manifold I look on you tube no one has compared it to stock manifold pai or Pdi
What happened to most recent video? Did you take it down?
Hey bro, I know you have a Garret turbo on there now, how do you get such a nice BOV sound? Like what do you have to do to do that?
Hi I'm thinking of buy pai it's been a while since you put it on your truck what do you think of manifold
Didnt you need to calibrate or recalibrate the turbo?
Shouldn’t need to do any calibration on an older fixed vane turbo.
@@brvfd822 👍
😂recalibrate what? It's an old non vgt, non waste gate turbo😅
I called Pai Industries and They do not want to sell to individuals, do you know how to order it please?
Be safe as always keep on trucking 🚚✌☕☕Good 🌅☔☕☕
Good video A. K
Spool up faster? And pyro temp drop?
💯💯
When is the update?
Awesome truck
How's the manifold? Any problems? Working fine?
Still working years later! No issues
Just double checking, was the total kit $800? Or was that just the manifold? Also, I contacted PAI to check cost and they were not able to help me since I am not a dealer. Do you know who I could purchase the kit through? Thanks for your time.
Order it through Rush International
I just got mine today
$1,525 with tax
Notification Squad.
Pai ceramic manifold are no good after 6 months star to leak from the right & left section I put two of
Those to my detroit 60 series
& not good
2 👍up bro
are you going to sell that fld ? plz let me know im interested...
We’re did you get the turbo from why do u think it’s better then pdi and alll the other places
I got the turbo from my load shop Diesel Air just a factory garret
And I’ve talked to a lot of people and a lot of old school truckers and they said they ran it once and it was trash and to stay away
The PDI turbo is just a polished 171702, no big deal.
@@TheRoadhammer379 171702 is non-waste gated
@@TruckerAK looking for a good turbo for my c15
👍👍👍
the classic is looking good
keep it up drive safe
greetings from the Philippines🇵🇭
i have to say
you a great and recbectfull man you know every thing about Your truck keep up the good work my man 🔥🔥🔥🔥
Where are the results or Update?
Noti squad
Smooth
Where the other truck you own
is priced for 1500 5/10/22
What did you expect to gain? Without other mods you're not going to notice any change in performance.
How much was the manifold
Iz kojeg si dijela bosne?
👍🏻
Man my experience with PAI was a freaking disaster. I called them after seeing your vid and told them I wanted an exhaust manifold for my 2015 Columbia. Even gave them the engine serial number. The guy gave me the part number and price so I approved the purchase. M&D Distributors is who shipped it and low and behold it was the wrong freaking part. Because the old manifold and gaskets came off and there's a freaking month out on a gasket kit I had no choice but to use the new hardware to button up my truck. Called PAI and a clueless rep lady couldn't even pull up the P.O. number. Luckily M&D Distributors is working with me to figure this out. They told me to contact the distributors from now on when ordering parts.
Next move is a non wastegated turbo, then a tune. 600hp all day
600 is cool but diesel control service now does a 3 program ECM, matched to your engine. Turn a knob and you can have any power rating from 430hp, all the way up to 780hp. I have 430, 550 and 720.
I slapped a 171702 on my S60 12.7L without additional "tune" and I noticed my boost dropped from max 35psi on waste gated stock, to 30psi max. ..... What gives? 🤔
@@vroor32 you have air but not enough fuel to match more air coming in
@@johnkovac4436 I already fixed that. It was the 3-piece exhaust manifold leaking. Once I swapped in the 1-piece from PDI .... No more exhaust leaks. I hit 35psi easy. Fuel econ @ 7.5mpg IFTA now even with 43.5K in the reefer box
Hey how can I figure out what part number I need
They don’t seem to know
Just call freightliner and give them your vin number and ask them to give you your engine serial number
yo what up Buddy and dad ur going to put some Truck headers on that thing no or what so it can Breath a little and talk to u to A ha ha ha
Frst
When you going to the light work on your on truck yourself instead of being in a hurry to talk about what a person need to do lead by example instead of letting your buddy do your work right.
Damn bro, your comment is borderline incomprehensible. Who tf are you to trash another man when you can't even grasp the use of the English language?