Hustler Raptor Will Not Start
HTML-код
- Опубликовано: 13 май 2022
- Hustler Raptor SD 0 Turn Riding Mower will not Start.
How to check and adjust safety switches.
Hustler Model 936708
How to start and operate Hustler Raptor. • How to Start and Opera... 
Хобби
![Hustler Raptor Mower wont start FIX [ Battery and Starter Solenoid ]](http://i.ytimg.com/vi/VPyG1YJk-j4/mqdefault.jpg)
This video helped me so much!! I got the mower from my father in law who had tried the starter solenoid and had left it as it was, by passing the normal start method. While checking the switch position on the exact same switch, I found that the switch wire was actually damaged and broken in two. I fixed the connections and BINGO, it started like a charm. Thanks for the video!!
I’m glad it was helpful! Thank you for sharing and the kind comment.
Man this is good stuff I have a much older ZTR50 and it has the exact same issue the safety switch was not fully engaged. I only found it by mistake shaking and moving the levers gave me the clue!
Thanks a million for sharing! This exact issue happen to my 42" today and I was able to fixed it.
I'm glad it was helpful and thank you for the kind comment! Please give this video a like and share my channel to help it grow. It would be greatly appreciated!
You are the man and you save me a bunch of money. I had the same exact issue with my 2018 hustler raptor SD with a 60 inch deck. I’ve checked Continuity on my starter relay on the starter on my switch and everything your video helped out very much. Thank you.
I’m glad this video help you!! Thanks for sharing. Please give this video a like and share my channel with your friends to help it grow. It would be greatly appreciated!
Hey Brad, Nice video tutorial, showing how to troubleshoot why this mower will not start!
And showing how to adjust the safety switch.
thx, tommy
Thanks Tommy and thank you for watching and commenting.
I picked a 2013 hustler up for $100 not running- it needed the spring for the belt tensioner and the safety switches adjusted, thanks to u we got us a Great mower that starts and mows good now. Thanks for the Video 👍🏼
Nice!!!!!! Thanks for sharing:)
Thank you so much for this video…our mower just abruptly stopped cranking/ it would turn over but wouldn’t crank. We did everything from change spark plugs to clean carburetor to checking everything possible until we had given up. I told my husband I’d look on RUclips and this was the first video I pulled up, tried it and sure enough after two days of troubleshooting-this was the problem the whole time! Sure wish I would’ve saw this before we went thru the trouble, but none the less, problem solved! Thanks again!!!
Glad to hear you stuck with it until repaired and found the video that was the fix! Thank you for sharing and the kind comment. Please give this video a like and share my channel to help it grow. It would be greatly appreciated.
Very useful! Thanks so much!
Glad it was helpful!
Good job, Thanks for the video.
Thank you for watching, commenting and supporting my channel.
Great video, thank you!
Hi Sam, I'm glad it was helpful! Please give this video a like and tell your friends about my channel to help it grow! It would be greatly appreciated. Thank you for the kind comment.
Thank you. 😀 GOD bless you for this very helpful video. 🙏
I’m glad it was helpful and thank you for the kind comment. Please give this video a like, subscribe if you haven’t yet and share my channel to help it grow. It would be greatly appreciated.
I have a 42'' Huster Raptor but not this exact model. It is very similar to mine and I have had issues starting for years. Today I tried to get it to start for well over an hour and finally gave up. The last time I cut the grass it must have taken 150 tries before it finally started. After watching this video I immediately went to my shed with a flashlight and I have the same safety switches. However, mine appear to go in much farther than the ones on this mower did before adjustment. I was hoping that wouldn't be the case but maybe they still need to be adjusted. Tomorrow I will see if this does the trick.
That did it! Thanks!
I’m glad it was helpful, Thank for for commenting. Please give this a thumbs up!
Thank you so much!!!!
You're welcome! Thank you for watching:)
That was the issue exactly thanks!
I’m glad it was helpful and thank you for the very kind comment. Please give this video a like, subscribe and share my channel with your friends to help it grow. It would be greatly appreciated.
I was thinking it might be some sort of safety switch. My old Toro riding mower has safety switches which are finicky sometimes.
Excellent
Thank you! I'm glad it was helpful.
Good video.
Thanks Jim, I hope your back up and running.
To test them wih a meter, pull the connector off, use alligator clips and clip on the two contacts, set meter to beep ohm continuity, push button in with finger, if beeps continuity and switch is good.
👍🏾
I have the 60 " Hustler Z . It will start but as soon as you pull the handles in it dies. Any help would be greatly appreciated. Tia
Make sure the parking brake is off and pull the handles in at the same time. If that doesn’t work, it would need to be diagnosed with a multi meter.
Thank you. I think it's the safety switch on the seat.
Hey there, I did re-adjust my Steering Levers' safety switches. It helped the mower start once after that, but now back to "nothing" when I turn the key. New Ignition Switch, no change. Turn key: no clicking, no noise, no crank. Nothing. Any ideas what next?
Could be many things, start by re-checking the safety switch adjustment, blown fuse?bad safety switch? bad starter solenoid? To diagnose it properly you would need a either a multi meter or 12volt test light.
Mine started and mine has a rocker switch for up and down and I just bought this yesterday mind you! So I started it lowered the deck....too low so went to raise it and couldn't get it to raise so I shut it off! I pushed the mower switch down and tried to start it and NOTHING! The only thing I see is the fuel guage go up!!! Any ideas?
Turns out, bad Solenoid. New Solenoid DIY, now starts right up like it should. No more grinding.
I got a Hustler Raptor that's keep blowing the fuse every time you turn the key to on position, I replaced the key switch but still blowing the fuse I checked the wire harness and is ok. Do you you have any ideas what could it be?
Impossible to figure out without seeing the machine and not knowing the model or having a wiring schematic to even give you a suggestion. Normally It will be a hot wire going to ground and that is what your looking for. I have seen fuse boxes and fuse connections at the fuse holder fail. Check the simple first, clean battery terminals and make sure the connections are tight at the battery. If you have loose connections, you may have intermittent arcing throwing voltage inconsistently but I do not see that often. I do come across head light wiring that frey and ground but I will assume your machine does not have any. You can also disconnect all of the wiring plugs, then start at the farthest plug in the wiring, leaving the ignition switch in the on position. When the fuse blows, it may get you closer to find where the issue is. If you do find out what happened, please let me know what is was.
@@JohnsonsSmallEngines I have a Hustler Raptor model#938605 with a 23 hp Kawasaki engine . well I use an ohm meter to check the wires ,I notice that the starter solenoid wire going to the starter was showing voltage, so i figure bad solenoid, I removed the starter solenoid ,turned the switch on and did not blow the fuse. I left it alone for awhile and try again and it did blow the fuse with out the solenoid wires been hook up, one thing that puzzle me is I disconnect the negative terminal from the battery and put a meter lead on the negative post and the wire going to the starter and I have voltage this is crazy,
the next day I hook the negative back up and try again and the fuse was ok , i try many time and di good, let it alone for a while try again and the fuse kept blowing again , it must be the ignition switch , this is the second switch I replaced , I'm thinking of cutting the ground wire from the ignition switch. right now and waiting for the starter solenoid to come and try again
Thak you for your reply
Did you get it fixed? I’m just curious what the problem was.
@@djc213 cheap ignition switch, got a different brand
It’s cranking but not turning over
No gas or the choke is not going on correctly.
I was half way done and ran out of gas. Put gas in it and still want start. Used same Gas as the week before. Plugs only a yr old. Fuel filter is full. I'm stumped.
@@medlytek yeah well when I put it away in the fall I left a full tank. After messing with the battery and motor I found out my wife was riding it while I was gone. I filled it up it works fine.
Got the left side you show fine but getting even my female hands in the side you don’t show is nuts! Too many obstacles in that side
This is Hustler's poor quality control. I've had 2 new Hustlers with the sane issue. Both were almost brand new and had this problem. It shows their poor quality control in their assembly process.