Maybe someone else already suggested this but one way to improve upon this design would be to configure the 2 rollers on the one side to be "slidable" so that you could achieve tighter diameter bends by moving them closer together. Regardless, I love how this was made and plan on making one at some point myself. Props!
Very good video to watch. Thank you for taking the time to make it and put it on RUclips for all to see. Enjoyed you using this tool in the end of the video.
Yep. I need a roller bender. I looked at the price and decided, too much. After seeing this I might make my own but a bit heavier. I am glad I watched the video
That saw reminds me of ones in a place I worked , they had recirculating water- solvable oil for cooling - lubricating and some of the oils were rancid and had bacteria growing in them and the fan on the motor would blow over the oil and into my face so if I had to run it a lot I would have to avoid breathing through my nose as it would mess my sinuses all up. Wonderful memories
I thought that is what used motor oil was for, otherwise you will have a hard time building your own rundbiegemaschine! I have bad sinus issues too, morning, noon and night. It ain’t fun.
So the "roller" is a steel tube inside another steel tube? How do you get smooth rotation under pressure? Do you lubricate the surfaces? Or do they already have low friction plating on them, like electro-less nickel? Thanks.
How nice it is to see a craftsman who de-burrs each hole he's drilled! Thanks for sharing!
Glad to see people making tools instead of just buying them. Nice work
Die beste Idee die ich bis jetzt gesehen habe. Sehr einfach und besonders Platzsparend.
Best DYI roller beneder on the internet. Super simple, really efficient. Genius!!!
Sehr beeindruckend, vor allem die Idee, den Schraubstock in die Vorrichtung zu integrieren
This is one of those ideas where I think to my self “why didn’t I think of that”. Very good.
Good to see someone using proper heat/wire speed when MIG welding. Most are usually way too cold.
Maybe someone else already suggested this but one way to improve upon this design would be to configure the 2 rollers on the one side to be "slidable" so that you could achieve tighter diameter bends by moving them closer together. Regardless, I love how this was made and plan on making one at some point myself. Props!
Do Brasil, rapaz, que ideia fantástica. Você está de parabéns por sua criatividade
Very good video to watch. Thank you for taking the time to make it and put it on RUclips for all to see. Enjoyed you using this tool in the end of the video.
Вот это я пониммю...👍👍👍 это и загибочный станок, и тиски и со временем еще что - то придумается классно 👍👍👍🍺
Не загибочный, а гибочный
Excellent job, showing no need for bearings
lol...somebody really wanted his own roller bender!
Great job....enjoyed the hell out of it.
Yep. I need a roller bender. I looked at the price and decided, too much. After seeing this I might make my own but a bit heavier. I am glad I watched the video
So Alan, you want a larger rundbiegemaschine?
Don’t we all!
All he needs some cutting oil.
Simple and straightforward. Durchgebraten
That works amazingly well for not having any gear reduction or knurling on the driven roller.
That is great! I love these type of videos with good ideas
That saw reminds me of ones in a place I worked , they had recirculating water- solvable oil for cooling - lubricating and some of the oils were rancid and had bacteria growing in them and the fan on the motor would blow over the oil and into my face so if I had to run it a lot I would have to avoid breathing through my nose as it would mess my sinuses all up.
Wonderful memories
I thought that is what used motor oil was for, otherwise you will have a hard time building your own rundbiegemaschine! I have bad sinus issues too, morning, noon and night. It ain’t fun.
Интересно было посмотреть
Пойду попробую с помощью дрели и болгарки повторить.
You deserve a Nobel prize... well done
Не деген керемет, қандай жұмыс істесен да бәрі бар. Бай екен тұрады екен.
VERY NICE!!!!!! EXCELLENT INNOVATION!! I LIKE THE PARIS 500!!!!!!
А если бы ещё и ролики наборные то вообще бы цены не было👍🏻 Классная приспособа😎
Super Idee 👍👍
Excellent travail Monsieur.
Un grand salut de Casablanca " morocco "
Geniale Arbeit. Klasse. Das Beste, was ich seit langem gesehen habe.
super i przedłużenie rączki do grubszej stali.Pozdrawiam z RP.
Great creation and build. Excellent video work! Thanks
That's awesome.
Now i know how to make it.
That is an awesome tool that you made! Props and respect, Turbo!
Simply the best, genial und einfach :-) Muss unbedingt nachbauen D A N K E ♥ Habe mich sofort verliebt ♥♥♥♥
Best one I've seen!
Genius. Simple and effective.
Τι λες ρε φίλε μου μπράβο σου!!!,🇬🇷🇬🇷🇬🇷🇬🇷
You real DIY! You'r idea very nice! Thanks!
Excellent job ! 👍🏻
put simply.......your good......i am impressed
Excellent! AND it works real smooth. 👍👍👍🤑
Great video. Thank you.
Instantly subscribed!!!
OMG your a genius with awesome fabricating skills...Id be interested in buying one should you ever build another one :)
Best bender machine
Давно такое сделал. Два уголка,три болта приваренные и на них три натяжных ролика. За час сделал для сгибания профиля для беседки.
а профиль сгибает 15х15х1,5 и 20х20х1,5?
@@MakcKO71 Сгибает . Только тиски у меня станочные (со сверлильного станка).
Excellent work, a really good idea many thanks
Rất độc đáo , nho gon .😃👍💯
Ótima ideia ao aproveitar a morsa de bancada para nela instalar uma calandra.
That’s just genius 💯🎯
Idéia fantástica.Parabéns pelo vídeo.
Very elegant indeed.
You my friend did an absolutely stunning job. Excellent craftsmanship also. Thanks for sharing 👌
Genial einfach - Einfach genial
super smart build....ill be making one of these.
Muy muy bueno y practico se ve útil muchas gracias por estos vídeos.desde chile
Thats inventive, i like
great job, genius👍
Todo nuevecito. .. hasta la herramienta. 👏👏👏👏👏
Very nice 👌🏻👌🏻👌🏻👌🏻
great work guys do you have video how you made your jig for bending the bars ?
Sehr sehr gut!
Ijin nyimak bosq❤❤❤❤❤❤👍👍👍👌👍🙏
Interesante y rapido de hacer😃🥰💯 bueno👍💪✍️
Супер! Молодец!
Прикольные чтоб сделать нужно обрезной станок,токарный сверлильный полуавтомат гарелку балгарку шуруповёрт и балончик краски ни чего не забыл😀
Nice job simple machine but does the work
GOOD JOB !!!!!! :)
Regards Paul P - PP
Nice video sir.
that was rad. a jig for the vise.
The idea with the vise is brilliant. What is the clearance in the axle / hub coupling ?
Complimenti bella idea Bravo Ciao
beautiful job ! like
Loved it!
Good 👍👍
راك فنان كبير
Cool!! Thanks!
Sangat berguna buat Sahabat-sahabat Kreatif dalam pengembangan Usaha Pengelasan Las Listrik.
Brilliant. Can you make pipe bender? Thnk you
Great job!
Congratulations
Muy bueno 👍👍👍
Nice idea
Nagyon jó!!!!
Steller job!
Лайк 👍👍👍👍
Brilliant!
Nice Build!
Nice round circle!
I'm looking for ideas to make a roller , this is the best , thank you
Excellent job, thanks for sharing.
Excellent and ideal for a small workshop! Have to make one for my vice.
Done
Very Cool 👍
Sehr gut gemacht.
Это где-же столько инструмента набраться ??? А так красиво конечно.
Great beautiful 👍👍👍👏🇧🇪
What a great design good job man
So the "roller" is a steel tube inside another steel tube? How do you get smooth rotation under pressure? Do you lubricate the surfaces? Or do they already have low friction plating on them, like electro-less nickel?
Thanks.
Great job!
Para diferentes diámetros se cambia el del centro?
That's cool
Sehr gute Idee 👍👍👍
Tap n die. Good. Nice work with meatel. U can make. Lil mistakes unlike wood working. Like plasma cutter. Good job sir!
Lovely work
Very nice, thanks for posting.