Nope bulldozer was a pioneer of true multicore home cpu I have 8320 and havent any problem with games Why ? I OC it to 2600 NB and 2133 RAM and 4.2 core with undervolting it to 1.200 It boosted it significant Even if he loaded over 90% it still smooth and my 1070 loaded 97-100% in any games such as assassin series or the last of us(93%) The only game I like and I hate -Arma3 It always loaded 1 core to 100% and almost no load to another But other games 60-90 % with GPU close to 100% FX for 80 usd lasts for me 12 years and still will be in my kid PC Dont hate it only because u dont know how to OC it right The memory speed is the key
Цікаво булоб подивитись на "нову" реверсію плати машиніст Х99 RS9 (v5 чи v6, не пам'ятаю) де: 8 фаз, замість 6-ти, з активним охолодженням; чипсет Q87(але не точно, можуть буть й інші В85, С226); наче, як 4канали!; інший аудіо чип; два М2 розєми + WiFi; 6 SATA; мікро АТХ, теж червоно-чорна; та ще щось... Коротше переробка у кращій бік, по бахатому)) Обзори у вас цікаві, дякую!
@@Miyconst так, в назві RS9. За версію, вичитав у описі, якогось магазину. Вони чорно-червоні із кулером в радіаторі охолодження фаз. Переважно продаються, як збірки, але можна замовити й окремо плату. Середня ціна 2500-2600.
thank you so much, such a quality content may i ask something. in my country machinist x99 is not easy to find do i have other options for motherboard?
JGINYUE JW-JY-X99M - about 70-80 USD 2 NVME M2 4 channel DDR3 2133 (bios already has timing control) -supports desktop and server memory 8 channel (4x2) VRM And its white ) I added 2666v3 for 12USD and 4 desktop DDR3 1600 modules for free ( OC to 1866 10-10-10-28 = 54500 read and 45500 write speed) Cheapest upgrade ever )
@@BK2Modder Motherboard Name JGINYUE X99M-PLUS D3 (it has 'clone' with ddr4 ram -slightly more cost) Just seek where u can cuz I bought it from local eshop and not aliexpress directly
@@arcadeslum5882 It depends on where u are I bought it into local e-shop cause it was significantly cheaper than aliex Second name of this board is JGINYUE X99M PLUS D3 (D4 for DDR4)
The problem with this mobos is it's lifespan. When buying a gaming pc i expect it to last at least 2 years but it takes 8 -11 months for this mobo to dead . Thanks for your hard work.
Silly question - for boards like that, as in weak VRM and better not to take risk with TUB. Wouldn't it be better to take v4 Xeons overall? Tho I mean WHEN the board supports DDR4 and not DDR3* but about DDR3 - yea, video proven full that going with that memory fort those boards is just very bad thing to do
First, thanks for being the first RUclips member on the channel! Second, yes, you are right. The DDR4 version with V4 CPUs make much more sense but in this case I didn't have much of a choice. Currently I am working on a mini X99 PC with X99-PR9, so hoping to make some comparisons there.
No, it's no difference since the motherboard has only two memory channels. As long as you put one memory stick on each side of the CPU it will be the same as four sticks.
@@Miyconst Sorry for bothering you but I have another question. Which bios from your application I can use with this motherboard for turbo unlock (2673v3)?
Yeah, considering that high end quad channel DDR3 builds can get very close to low-speed DDR5 in raw bandwidth and are actually better in latency, the real reason DDR3 builds aren't as good today is that the CPUs that support it are quite dated. Sure modern RAM has some notable advancements, such as efficiency, but aside from quantity it's still one of the least important things when building a PC.
hi sir! this pr8 work with 3 ram sticks? or with only 4? i have 2x8 and i got another 8gb ram but the system doesn’t work when i put the 3 sticks…. i was thinking about got another one stick and will be 4 sticks, using full 4 slots! all my 3 8gb sticks are absolutely the same type! it will work?
Dear friendly friends, my neighbor only had non ecc ram, one is hynix 8gb ddr3 1600Mhz 1.5v and the other is kingmax 8gb ddr3 1600Mhz 1.5v, if purchased combo pr8+e5-2666 v3 are you endorsed or not? Thanks.
Hi! I just bought this mobo with 2697V3 and 4x16GB Micron server memory and do not want to boot. Vga and CPU cooler is spinning, but no screen. Do you have any idea?
@@ngocthienta5299 that's great that the v4 xeons do. They'll be terrible still for gaming and processes that want less cores and higher clocks. Cuz u can turbo unlock other xeons, but obviously not the v4.. or can you? You're the first I hear from, that ddr3 can be used in particular v4s.
@@yasirrakhurrafat1142 no you can't apply Turbo Unlock for V4, but from what I read it seems that their single core performance is still superior to v3
@@ngocthienta5299 V4 superior to V3 only on equal frequency . V3 with turbo unlock faster than V4 . But for most games it doesn't matter due to V4 performance enough to fully load middle class GPU
Hello Miy, what would be your motherboard recommendation under 50$ for someone building their first x99? I guess Mr9A is the best in this price (during sales event) but I may be wrong. I'm seeing all your videos but its easy to get lost with all Machinist, Huananzhi, Jguunye and all other MBs. I'm planning to pair with a 2680v4 mainly for gaming. Thanks!
So I decided to buy the same motherboard and processor since together they cost under 40$. But my problem is that my system won't boot when I enable above 4g decoding and resizable bar. Any idea what could be the problem?
Your RX 580 might be incompatible with Resizable Bar, especially if it's a Chinese one. CSM is enabled by default and must be disabled for Resizable Bar.
@@MiyconstI disabled CSM and finally got it to work but the colors are messed up on bootup like the machinist bootup screen and the bios. It's all fine when I get into windows tho.
Hi, I've got a problem with two different rigs on Xeon but the problem is the same - when I instert 4 ram modules(4 gb each module), there is no signal on the monitor but the PC boots up. When I eject one ram module (the closes to the usb and other jacks on the left), the PC starts normally with 3 ddr modules. Modules are ok, the slots are clean. The problem is the same on two different rigs!! How is that possible?! My rigs are: Alzenit x79 + Xeon 2630 v2, the other rig: Machinist x99 RS9 + Xeon 2630 v3. Has enyone come across such a problem?
@@artur19846 better use 3 ddr to activate 3 channel mode But maybe u will try with differnt power source one more try ? Sometimes changing PSU is the solution
In a Budget build you wanna get the most for the buck , since you use AMD cards i recommend to add a run with AFMF ( if DX10/DX11/Vulcan Game ) since AFMF is integrated in the regular Driver . As i see it , there is basically no downside if you use it with a Freesync Monitor aside a added Latency of 20-40 ms . Yes , the FPS will dip in fast movements b u t they wont dip under the FPS in native resolution ( or mabe 5% because AFMF needs a little compute Power ) but in 95-99 % of the Time you get nearly double the FPS and its worth it in my eyes especially with low-mid Tier GPUs which are in the GPU Limit . Some Games are better played without AFMF like competetive 1st Person online Shooter Games but more than 80 % are better played with AFMF , at least if your GPU is unable to produce more than 60-70 FPS and you want 120 FPS for a smoother Gameplay .
@@andrasszentannai6993 yes, but I can guarantee absolutely nothing when it comes to the Chinese motherboards. It should work but may also brick your motherboard.
2650в4 збірка буде коштувати стільки же, в іграх бальш менш однаково себе покаже а споживати буде в 2 рази менше, отже і материнка проживе довше і витрати на електрику менші ), а краще докласти 10 євро до 2680в4
@@Miyconst я сам тестував 2650в4 з рх6600, я такі комплекти перепродаю, чудово все працює в іграх. Кіберпанк High (default) 90 fps, Forza 5 Hi 114 fps (без ReBar, з ним десь 120+), Hogwards HI ~70fps, COD Warzone (ultra+fsr-q) ~95 fps, може на 10% повільніший від 2680в4, але всеодно достатньо для любої гри за такий бюджет. а якшо макс графіку ставити то упреться у відеокарту. Я також мав 2640в4, так от 2650в4 токи більше фпс малює в іграх не дивлячись на нижчу частоту (більше кеш, ядер та память 2400). Навіть Фаркрай Нью Давн бенч 67 фпс середні на ультрах намалював.
@Miyconst Is it possible to post a video about the best Xeon gaming cpu ? Creating a cpu list from the best to the worst for V4 version, without taking care about pricing! THANKS :)
Hello my friend. I watched a video of someone I’m subscribed to and he recently built a workstation for video editing and said he got a lot of help from your channel. I’m also looking to do this. My daughter has a TikTok with a couple videos with over a million views. She makes them on a cheap AF ryzen 3 7000 series Lenovo laptop. I want to make her a machine that will make editing her videos easier for her. But that’s all it would be for. We both have our own am5 gaming rigs. I want to build her the cheapest beast of a video editor I can. Where should I even start
Why not use the AM5 rigs for video editing? If your daughter is fine with a laptop, any modern PC will be a major upgrade and enough for her. Something like Core i5-13500, RTX 3060/4060/Ti, 32 GB RAM, 1 TB SSD.
@@Miyconst I haven’t actually built her rig just yet. I built my am5 rig soon after release of am5. So went cheap. And cut some corners that shouldn’t have been cut for what I actually wanted in the long run. I’ve since literally replaced every single thing on my build save for my motherboard. So all I have to do is buy an am5 mobo for her and she will have a ryzen 5 7600 non X, 32gb Kingston fury CL32 5600, 800w evga gold ge non modular, ek nucleus lux240 aio, rosewill prism s500 and a choice between the Intel arc a750 and the rx7600 as I bought both. My current rig is: MSI Pro B650p WiFi Ryzen 7 7800x3d Sapphire Pulse RX7900xt 64gb Corsair Vengence CL30 6000 Corsair iCUE 4000d RGB airflow Corsair h100i elite capallix xt And I dunno. 🤷 Maybe I just want to use old hardware to prevent ewaste?
If you already have most of the components - go with the planned AM5 build but don't install two GPUs, just go with Arc A750. Test how it works with her editing software and swap with the Radeon if Intel is too bad. When thinking about the environment, keep in mind that all Chinese Noname products are made with violation of all possible environmental norms and working conditions.
Hi is it possible to use Machinist X99 MR9A PRO MAX with I7 Xtreem although it has Q87 chipset not a real X99 which supports overclock for those cpus? My setup has the same cpu E5 2666 V3 10C 20T paired with Machinist MR9A PRO MAX X99 with turbo boost unlock so the 10C are running all the time on 3.59 Ghz. And I am using a 6 pipe air cooler max temp I have seen in hot days was 80 degrees. 32GB DDR4 RAMS.
An almost 10 year old cpu with 15 year old ram tech on it getting this sort of performance is a thing of beauty tbh
Very true.
Yes it's from an Era when machines and computer were made to last longer, they were built tough.
@@arghyaprotimhalder5592 nah X99 is just really good. 3rd-7th gen intel core sucked with 4c for years and Bulldozer was a disaster
Nope
bulldozer was a pioneer of true multicore home cpu
I have 8320 and havent any problem with games
Why ? I OC it to 2600 NB and 2133 RAM and 4.2 core with undervolting it to 1.200
It boosted it significant
Even if he loaded over 90% it still smooth
and my 1070 loaded 97-100% in any games such as assassin series or the last of us(93%)
The only game I like and I hate -Arma3
It always loaded 1 core to 100% and almost no load to another
But other games 60-90 % with GPU close to 100%
FX for 80 usd lasts for me 12 years and still will be in my kid PC
Dont hate it only because u dont know how to OC it right
The memory speed is the key
@@kishirisu1268 Example please .What game?
Nice video bro, as always. Slava heroyam!
Just found this channel, and gotta to say i love the content! Keep up the good work 💪
Thanks for the support!
should I be fine with 450 watts PSU with this cpu?
Thank you very much for a great video.
Цікаво булоб подивитись на "нову" реверсію плати машиніст Х99 RS9 (v5 чи v6, не пам'ятаю) де:
8 фаз, замість 6-ти, з активним охолодженням; чипсет Q87(але не точно, можуть буть й інші В85, С226); наче, як 4канали!; інший аудіо чип; два М2 розєми + WiFi; 6 SATA; мікро АТХ, теж червоно-чорна; та ще щось...
Коротше переробка у кращій бік, по бахатому))
Обзори у вас цікаві, дякую!
Цікаво, ця оновлена версія так само називається? Щось не можу знайти її на Алі.
@@Miyconst так, в назві RS9. За версію, вичитав у описі, якогось магазину.
Вони чорно-червоні із кулером в радіаторі охолодження фаз. Переважно продаються, як збірки, але можна замовити й окремо плату. Середня ціна 2500-2600.
thank you so much, such a quality content may i ask something. in my country machinist x99 is not easy to find do i have other options for motherboard?
What other motherboards can you buy? I need to know what sites and/or stores are available in your location to be able to suggest something.
will aliexpress not ship to your country? thats the way I think most people get them.
JGINYUE JW-JY-X99M - about 70-80 USD
2 NVME M2
4 channel DDR3 2133 (bios already has timing control) -supports desktop and server memory
8 channel (4x2) VRM
And its white )
I added 2666v3 for 12USD and 4 desktop DDR3 1600 modules for free ( OC to 1866 10-10-10-28 = 54500 read and 45500 write speed)
Cheapest upgrade ever )
Neat! Do you happen to have a link to a listing for this board?
@@BK2Modder Motherboard Name JGINYUE X99M-PLUS D3 (it has 'clone' with ddr4 ram -slightly more cost)
Just seek where u can cuz I bought it from local eshop and not aliexpress directly
where to buy?
@@arcadeslum5882 It depends on where u are
I bought it into local e-shop cause it was significantly cheaper than aliex
Second name of this board is JGINYUE X99M PLUS D3 (D4 for DDR4)
Can it run 8 channel ddr3. I am in need of 256gb ram
The problem with this mobos is it's lifespan.
When buying a gaming pc i expect it to last at least 2 years but it takes 8 -11 months for this mobo to dead .
Thanks for your hard work.
It's a problem with anything you buy on AliExpress. Some items last for years, others only several months.
Uhm I have x79 motherboards from Aliexpress still working fine after 4 years...
@@stephendetomasi1701 same, with 2689 at that.
Please make that video, I want to see the difference in performance with turbo boost and quad channel DDR3 🙏
Silly question - for boards like that, as in weak VRM and better not to take risk with TUB. Wouldn't it be better to take v4 Xeons overall?
Tho I mean WHEN the board supports DDR4 and not DDR3*
but about DDR3 - yea, video proven full that going with that memory fort those boards is just very bad thing to do
First, thanks for being the first RUclips member on the channel! Second, yes, you are right. The DDR4 version with V4 CPUs make much more sense but in this case I didn't have much of a choice. Currently I am working on a mini X99 PC with X99-PR9, so hoping to make some comparisons there.
@@Miyconst net month will go higher with the membership, this month is a bit rough but hey - doing my part :D
No worries, don't take too much pressure, family and personal wellbeing goes first.
Bom dia, valeu!. Um abraço
omg amazing
Quality Upload.
Hi, thank you for your work! Will there be a big (or any) difference if I use 2x16gb over 4x8gb with this particular motherboard?
No, it's no difference since the motherboard has only two memory channels. As long as you put one memory stick on each side of the CPU it will be the same as four sticks.
@@Miyconst Sorry for bothering you but I have another question. Which bios from your application I can use with this motherboard for turbo unlock (2673v3)?
@@Kruku007 I would go with the safe option of -50/50 voltage reduction.
You should never be a ddr3 snob it still works wonders 🤩
Yeah, considering that high end quad channel DDR3 builds can get very close to low-speed DDR5 in raw bandwidth and are actually better in latency, the real reason DDR3 builds aren't as good today is that the CPUs that support it are quite dated. Sure modern RAM has some notable advancements, such as efficiency, but aside from quantity it's still one of the least important things when building a PC.
It surely does, just sucks twice as much power, compared to DDR4.
hi sir! this pr8 work with 3 ram sticks? or with only 4? i have 2x8 and i got another 8gb ram but the system doesn’t work when i put the 3 sticks…. i was thinking about got another one stick and will be 4 sticks, using full 4 slots! all my 3 8gb sticks are absolutely the same type! it will work?
my motherboard is a pr8, the same as the video
It should work. Make sure that you install the memory like XXCPU_X or X_CPUXX.
Dear friendly friends, my neighbor only had non ecc ram, one is hynix 8gb ddr3 1600Mhz 1.5v and the other is kingmax 8gb ddr3 1600Mhz 1.5v, if purchased combo pr8+e5-2666 v3 are you endorsed or not? Thanks.
What is the cooler exactly are u using?
Not sure if you'll respond but my e5 2666v3 is overheating and I'm using a deepcool gammax, what cooler were you using?
DeepCool Gammax is a decent cooler. Check mounting pressure and airflow inside your chassis. Also what is your ambient temperature?
@@Miyconst my mounting is pretty good and no gaps between the cpu and the cooler. My ambient temperature is around 35°c here
I've also experienced the same issue with the xeon E3 1220, 60°c to 70°c on 13% load.
@@Miyconst I think that it's a defective cooler since some of the metal things are bent
35C is a pretty high ambient temperature and you need to ensure very good airflow in the chassis. The cooler might be defective as well.
Надо делать unlock turbo boost, тогда не будет таких просадок фпс! 2666v3 очень удачный проц
Hi! I just bought this mobo with 2697V3 and 4x16GB Micron server memory and do not want to boot. Vga and CPU cooler is spinning, but no screen. Do you have any idea?
Please join my Discord, post some pictures and describe your problem, maybe I will be able to help.
@@Miyconst Done.
Can you make a TBU bios for PR8? I found just for PR9.
Hello! I have question should I be fine with 450 watts PSU with this cpu?
Please watch this video: ruclips.net/video/lc-Q37lSXHs/видео.htmlsi=TwTwKIX3LMqDoUcE
I have the same configuration with a 650w 80plus gold psu what is the best graphic card that I can buy for my pc ?
I would say something like RX 5700XT or RTX 2060 Super / 2070 would be the max.
Try V4's that are not listed on ark site, like 2683v4, 2686v4, with ddr3
Yeah, these V4s are also potentially interesting, pretty bad for gaming though.
2683v4 doesnt support ddr3, only 2676v4, 2686v4 and 2696v4 do
@@ngocthienta5299 that's great that the v4 xeons do.
They'll be terrible still for gaming and processes that want less cores and higher clocks.
Cuz u can turbo unlock other xeons, but obviously not the v4.. or can you?
You're the first I hear from, that ddr3 can be used in particular v4s.
@@yasirrakhurrafat1142 no you can't apply Turbo Unlock for V4, but from what I read it seems that their single core performance is still superior to v3
@@ngocthienta5299 V4 superior to V3 only on equal frequency . V3 with turbo unlock faster than V4 . But for most games it doesn't matter due to V4 performance enough to fully load middle class GPU
Poderia adicionar essa placa mãe em sua ferramenta para fazer modificações na bios ? Desde já agradeço
It's the same motherboard as X99-PR9.
Hello Miy, what would be your motherboard recommendation under 50$ for someone building their first x99? I guess Mr9A is the best in this price (during sales event) but I may be wrong. I'm seeing all your videos but its easy to get lost with all Machinist, Huananzhi, Jguunye and all other MBs. I'm planning to pair with a 2680v4 mainly for gaming. Thanks!
MR9A is the obvious choice if you can get it for ~$50, for now.
So I decided to buy the same motherboard and processor since together they cost under 40$. But my problem is that my system won't boot when I enable above 4g decoding and resizable bar. Any idea what could be the problem?
What is your GPU? And did you disable CSM?
@@Miyconstmy GPU is an RX580. I didn't touch the CSM so it is the default. Should it be enabled?
Your RX 580 might be incompatible with Resizable Bar, especially if it's a Chinese one. CSM is enabled by default and must be disabled for Resizable Bar.
@@MiyconstI disabled CSM and finally got it to work but the colors are messed up on bootup like the machinist bootup screen and the bios. It's all fine when I get into windows tho.
@@yourbluewaffle that's a common problem with the older GPUs and Chinese motherboards.
How did u put all the cores at 3,2 ghz with that motherboard PR8 without turbo boost ??
E5-2666 V3 is a special CPU, it boosts up to 3.2 GHz without TBU.
@@Miyconst thank you i was trying to find it on mi899 and it wasn’t there 😂
Hi, I've got a problem with two different rigs on Xeon but the problem is the same - when I instert 4 ram modules(4 gb each module), there is no signal on the monitor but the PC boots up. When I eject one ram module (the closes to the usb and other jacks on the left), the PC starts normally with 3 ddr modules. Modules are ok, the slots are clean. The problem is the same on two different rigs!! How is that possible?! My rigs are: Alzenit x79 + Xeon 2630 v2, the other rig: Machinist x99 RS9 + Xeon 2630 v3. Has enyone come across such a problem?
This is a typical Chinese problem when the memory power delivery system is not good enough for four memory sticks.
@@Miyconst Thanx a lot! I didn't know that. Should I install 8+8 Gb in dual channel?
@@artur19846 better use 3 ddr to activate 3 channel mode
But maybe u will try with differnt power source one more try ? Sometimes changing PSU is the solution
@@artur19846 You can do 2 x 8 GB or 3 x 8 GB, since those motherboards have a slot per channel, it doesn't hurt to have three sticks installed.
@@Miyconst Thank you! Is there a blacklist of the motherboards wich have this 4 module problem?
Can you make a tutorial how to undervolt for Xeon E5 V4? Couldn't find it anywhere
As far as I know it's not possible.
Do you know what it performs like in Warzone or mw3 with like 1070 or 2060
Warzone can use multiple CPU cores, so just check what GTX 1070/RTX 2060 is capable of in Warzon and that's gonna be about it.
The CPU ist good for 90-110fps in Warzone with GPUs like the 1080, Vega 56, 6600,..
Would u like to do some vid abaut dual processors on one pc(for example 2x xeon+ x99)
Not really. I see no point in such configurations.
In a Budget build you wanna get the most for the buck , since you use AMD cards i recommend to add a run with AFMF ( if DX10/DX11/Vulcan Game ) since AFMF is integrated in the regular Driver . As i see it , there is basically no downside if you use it with a Freesync Monitor aside a added Latency of 20-40 ms . Yes , the FPS will dip in fast movements b u t they wont dip under the FPS in native resolution ( or mabe 5% because AFMF needs a little compute Power ) but in 95-99 % of the Time you get nearly double the FPS and its worth it in my eyes especially with low-mid Tier GPUs which are in the GPU Limit . Some Games are better played without AFMF like competetive 1st Person online Shooter Games but more than 80 % are better played with AFMF , at least if your GPU is unable to produce more than 60-70 FPS and you want 120 FPS for a smoother Gameplay .
Whats the performance loss between ddr4 and ddr3?
It depends on the motherboard. I would say almost zero difference for gaming.
How do you set sync all core on this Mach. PR8?
Do you mean how to implement Turbo Boost Unlock? It is the same BIOS as X99-PR9.
@@Miyconst Well, then i can flash it with your tool. Am i right?
@@andrasszentannai6993 yes, but I can guarantee absolutely nothing when it comes to the Chinese motherboards. It should work but may also brick your motherboard.
@@Miyconst Well, You Are Great! It looks like working well… 😁👍👊 Thanks a lot!!!
2650в4 збірка буде коштувати стільки же, в іграх бальш менш однаково себе покаже а споживати буде в 2 рази менше, отже і материнка проживе довше і витрати на електрику менші ), а краще докласти 10 євро до 2680в4
Де можна побачити тести E5-2650 V4? Тактова частота в 2.2 - 2.9 ГГц натякає на жахливу продуктивність в забавках.
@@Miyconst я сам тестував 2650в4 з рх6600, я такі комплекти перепродаю, чудово все працює в іграх. Кіберпанк High (default) 90 fps, Forza 5 Hi 114 fps (без ReBar, з ним десь 120+), Hogwards HI ~70fps, COD Warzone (ultra+fsr-q) ~95 fps, може на 10% повільніший від 2680в4, але всеодно достатньо для любої гри за такий бюджет. а якшо макс графіку ставити то упреться у відеокарту. Я також мав 2640в4, так от 2650в4 токи більше фпс малює в іграх не дивлячись на нижчу частоту (більше кеш, ядер та память 2400). Навіть Фаркрай Нью Давн бенч 67 фпс середні на ультрах намалював.
@@yuralmspw4911 якщо є можливість - залий якісь відео в Ютуб та протестуй щось з того, що я тестував. Дякую.
I have the same board but the bios files are corrupted where can i get the bios files for this board
Check my Mi899 application and GitHub repository.
I sent the board to more than one maintenance shop and they all said that the BIOS file is corrupted. Can I buy the BIOS files for the x999 pr8?
Why should you buy it? Just download for free from Mi899 GitHub repository.
@@Miyconst Unfortunately, I did not find anyone else x99 pr9
@@Miyconst I hope you can help me
@Miyconst Is it possible to post a video about the best Xeon gaming cpu ? Creating a cpu list from the best to the worst for V4 version, without taking care about pricing! THANKS :)
Go for E5 2696v3
Hello my friend. I watched a video of someone I’m subscribed to and he recently built a workstation for video editing and said he got a lot of help from your channel.
I’m also looking to do this. My daughter has a TikTok with a couple videos with over a million views. She makes them on a cheap AF ryzen 3 7000 series Lenovo laptop. I want to make her a machine that will make editing her videos easier for her. But that’s all it would be for. We both have our own am5 gaming rigs.
I want to build her the cheapest beast of a video editor I can. Where should I even start
Why not use the AM5 rigs for video editing? If your daughter is fine with a laptop, any modern PC will be a major upgrade and enough for her. Something like Core i5-13500, RTX 3060/4060/Ti, 32 GB RAM, 1 TB SSD.
@@Miyconst I haven’t actually built her rig just yet. I built my am5 rig soon after release of am5. So went cheap. And cut some corners that shouldn’t have been cut for what I actually wanted in the long run. I’ve since literally replaced every single thing on my build save for my motherboard. So all I have to do is buy an am5 mobo for her and she will have a ryzen 5 7600 non X, 32gb Kingston fury CL32 5600, 800w evga gold ge non modular, ek nucleus lux240 aio, rosewill prism s500 and a choice between the Intel arc a750 and the rx7600 as I bought both.
My current rig is:
MSI Pro B650p WiFi
Ryzen 7 7800x3d
Sapphire Pulse RX7900xt
64gb Corsair Vengence CL30 6000
Corsair iCUE 4000d RGB airflow
Corsair h100i elite capallix xt
And I dunno. 🤷 Maybe I just want to use old hardware to prevent ewaste?
If you already have most of the components - go with the planned AM5 build but don't install two GPUs, just go with Arc A750. Test how it works with her editing software and swap with the Radeon if Intel is too bad. When thinking about the environment, keep in mind that all Chinese Noname products are made with violation of all possible environmental norms and working conditions.
Does the motherboard report correct power consumption??
Please watch the review: ruclips.net/video/j58Fpm0uetI/видео.htmlsi=xkML_e2gR85xk9uQ
@@Miyconst Is pr8 same as pr9 but DDR3 only, what CPU cooler is that, impressive it can handle 145 watt
Yes, it's the same, just DDR3 RAM slots. That CPU cooler is Intel OEM, not sold any longer.
@@Miyconst mi899 tool work or need to make custom bios using tool?
Please watch the video 😀
hi, Can you recommend me a cheap motherboard for a 6800k, pleaseeee
Machinist X99-MRA9 Pro.
@@Miyconst What is the difference with the non-pro version, outside of the cost?
@@hadez2021 the VRM, 6 vs 8 phases.
You should also include a modern similar budget cpu for some reference
Do you have any modern CPU + motherboard + RAM combos for €80 Euros in mind?
Hi is it possible to use Machinist X99 MR9A PRO MAX with I7 Xtreem although it has Q87 chipset not a real X99 which supports overclock for those cpus?
My setup has the same cpu E5 2666 V3 10C 20T paired with Machinist MR9A PRO MAX X99 with turbo boost unlock so the 10C are running all the time on 3.59 Ghz. And I am using a 6 pipe air cooler max temp I have seen in hot days was 80 degrees.
32GB DDR4 RAMS.
Чому не виходить відео на українській мові?
Як не виходить? Перше посилання в описі.
🔵🟡 4ever