How To Make A Bass Fishing Lure With Your Laser Engraver
HTML-код
- Опубликовано: 26 июл 2024
- In this episode of Laser Engraving 911 we go off the deep end of the lake and I attempt to make a bass fishing lure using my laser engraving machine and use some other cool tools! In the video you will get to see how I use adobe illustrator to design my lure, and the camera system in the Epilog Edge, as well as my laser engraving machine to cut out the lure and engrave the lure to add texture. Even if you're not into fishing my hope is that this episode will inspire you by showing you unique ways that you can use your laser engraving skills! LINKS TO ALL SUPPLIES LISTED BELOW!
✅Private 1 on 1 Consulting With Michael Laser Engraving 911
sonomalaserengraving.com/prod...
🍩www.buymeacoffee.com/laser911
TIME STAMPS
00:00 Introduction
00:55 Lure Making Supplies For This Project Overview
03:15 Using Adobe Illustrator To Design The Lure
06:08 Laser Cutting The Rough Shapes Out
06:24 Gluing The Two Parts Together
08:00 Shaping The Lure With Belt and Disc Sanders
08:25 Using The Epilog Edge IRIS Camera System To Engrave The Lure
10:40 Drilling A Hole For The Belly Weight
10:52 Inserting Belly Weight
13:12 Priming The Lure With White Paint
14:19 Venture Into Airbrush Painting The Lure
16:20 Adding Color To The Lure With Airbrush
17:21 Adding The EYEBALLS
17:50 Epoxy Coating The Painted Lure How To Guide
19:22 Close Up Look At The Final Fishing Lure
20:32 Adding Some Hardware Hooks and Stuff
20:54 Heading Over To The Lake
21:39 Tying On Our New Lure At The Dock
22:16 First Cast With New Lure.. Uh Oh! Mistakes Are Made
22:31 The Problem I Ran Into
23:39 The Solution To The Problem
26:05 Back Out On The Lake With Lure After Fix!
26:43 A Few Extra Casts For good Measure
27:08 Outro And Final Thoughts On This Project
My Favorite RUclips Lure Maker: / @marlingbaits
Be sure and check his videos out if you want to learn from a pro!
_____________________________________________________
🚨LURE SUPPLIES🚨
✅Belt Sander With 5" Disc: amzn.to/3ELC1zj
✅Desktop Drill Press: amzn.to/3hMvATq
✅NO COMPRESSOR Air Brush amzn.to/3VcJ6yg
✅Bass Wood Sheets ¼" amzn.to/3giLrZx
✅Fishing Eyeballs 3D/2D amzn.to/3Xf5rgq
✅Small Close Eye Screw 0.39 X0.16 amzn.to/3gqVgVj
✅More closed screw options: tinyurl.com/yc83dven
✅Pro Marine Two Part Epoxy: amzn.to/3IzsL3v
✅Steel Split Ring Tackle amzn.to/3tI04bQ
✅Treble Hook Size #6 amzn.to/3EooOLb
✅Cup Turner Tumbler: amzn.to/3hXpVtW
✅Createx Air Brush Paint amzn.to/3OjRoC0
✅Crap Ton Of Lure Parts: www.lurepartsonline.com/
______________________________________________________________
🚨OTHER TOOLS🚨
✅Forstner Drill Bit Set amzn.to/3CyCIKy
✅General Drill Bit Set amzn.to/3CyREZe
✅Bench top Vice: amzn.to/3itKDC7
✅Epoxy Brush: amzn.to/3VXu6nC
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
#luremaking #laserengraving #howtolaserengrave 
Хобби
NICE NICE !!!
Your one and only lure making video showed up in my feed of suggested videos, so I watched it again. I've seen a few others use lasers in the past year as a lure making tool. I hope this wasn't your last build!
Welcome aboard! 🤣 you are literally the only person on RUclips who appreciates my lure making video! This video when I launched it, I thought would do well, but actually no one cared about it,, its a lonely world being a bass fisherman! and even more lonely making your own lures with lasers. 🤣
@@LaserEngraving911 Probably because I'm subscribed to almost 100 channels that make or have made lures, because it is a hobby of mine. I suppose it is a niche.
As a bass fisherman and epilog laser owner as well….this was fun to watch. Fantastic work! Looks like a fun project to make.
Thank You fellow angler! appreciate that!
Once you've made a lure a couple times and know how much weight is needed, you can install the weight before gluing the halves together and then you won't need to use super-glue and baking soda after laser engraving. Great job on the lure build!
Awesome, I for sure am going to do that, I learned a lot from this whole project!
Adhesive instant Hardner will dry the superglue instantly instead of using baking soda. Comes in like an aerosol can
Awesome!
That's one tasty lure 👍 great video. Good luck with your catch
Thanks Buddy!
Very cool. I’m going to give it a try!
Have fun!
You can add a lip to it round bill or square bill
ooh nice!!
Nice Job!
Thank You! 😎
Great video thanks for the info. I love the camera system u have set up!!!! Can i do that using a Universal ULS 3.60, i also use corel for all my design work. THANKS
You absolutely can with your system out without the camera, and yeah Corel will work great. If you want some tips on how to to line up the graphic on the semi finished lure "without a camera" shoot me and email laserengraving911@gmail.com
Another problem is the placement of the ring for attaching line: it should be at the front of the lure, not the top.
Good to know for alternative ring placements! Thanks!
Another question, do you think that airbrush u have would work when painting laser engraved wood if you masked first then engraved thru the mask? I am just getting ready to try your powder coat method. Thanks again for your help!!
It could work yes but hand painting with acrylic paint is much quicker, and thicker! I like using the mask and brush technique for those kinds of projects.
@LaserEngraving911 yes i actually just watched that video today. Thanks for your time