Saab 9-3 Quick Fix - ECU Removal and Replacement
HTML-код
- Опубликовано: 10 сен 2024
- ECU Marriage: blog.uobdii.co...
Check out my new shirts here:
teespring.com/...
teespring.com/...
Merchandise/Website: autoautopsyyt....
Instagram: @Auto.Autopsy
Twitter: @AutoAutopsyYT
Email: AutoAutopsyYT@gmail.com
Outro song: • Koven x ROY KNOX - Abo...
Praying to the Saab Gods that my code P0638 and P0245 go away after doing this or I’m totally lost. Your videos are immensely appreciated. It’s cuz of guys like you that the Saab community continues to live on strong 💪
I am right with you brother. I’ll find out the answer to this tonight.
I was really nervous about this and thinking it was an unusual thing to need- my other non Saab cars have not needed a replacement ECU- much relieved !!!
It is a fairly common problem on the T8 cars unfortunately
Thank you for posting consistently.....................................
I try
Nice vid, thanks, ecus allways worry me on saab.
Heat soak on the 2.0 turbo,
And, water ingress on the 1.9 tid diesel, where the ecu is mounted behind the lower front bumper.
The kit to space the ecu
To prevent heat soak is ok, but save yourself a hundred bucks, I made my own out of heat resistant plastic, covered with foil, four extended screws and eight nuts.
Manifold, space, plastic shield, space, ecu. Wiring loom is long enough, and it works well.
Allways enjoy your vlogs.
The kit is perfectly good too and is supporting small businesses!
Wow thank you so much, found some calcium deposits in mine, tore a piece of an old air filter and brushed if off! Like new again.
where more exactly?inside the casing of the ecu or on the conectors ?
Adding the ecu is actually pretty easy besides having to search through forums for security access
yep
Some excellent advise ! Have got a spare one labelled and put away - there is a company in U.K. that rebuilds T8 units for £325
nice; that's a bit expensive...you can still find used ones for cheaper than that!
@@AutoAutopsy yes have a secondhand one at £120
remap included -the £325 is a refurbished one - having spacer fitted on Tuesday - spacer kit arrived quickly from Martin in Taiwan - ordered Sunday delivered to my door on Thursday 👌
name of UK company? link?
On my 03 saab 16th pin broke. Now it doesn't deliver power properly, check engine always on, can't go more then 3k rpms if I do then no more power untill I delete codes or let the engine cool down. Can I fix it somehow or just buy a new one?
I installed the ECU insulator kit that I got from "the man down under" on my 2006 Sport Combi. What is supposed to be 15 min. job took my bro-in-law and me 90 mins. LOL. Our big problem was that we could not get the intake hose free of the throttle body. It seemed welded in place so we had to work around it as I didn't want to ruin it. Other then that the installation was straight forward.
For $90 US (including shipping) I think that it was worth it to hopefully extend the life of the ECU. My car is now at 84,000 mi.
Jeez! Lol. Good to hear. I might end up getting it
Hi I have question I have car saab 9-3 2.0t 2006 shoe me code p0606 control module processor performance DTC severity 3 of 3. Stop and repair vehicles immediately to prevent interrelated . Can u explain us where we can buy that part? Do I go to the junk yard and get it or can u tell me where else I can get it from please?
Bring back the Saab company!
!!
In the middle of this now except its 2023 and ecu's are hard to find and Not Cheap lol
Found a dude on ebay who clones my ecu to another one that they sell. Will report back!
1:45 My main question is, why the heck is the ECU there of all places? Exposed to the heat, even though it's under a cover... Shoooo... I'd move it to another locations that's better for it so it doesn't "Heat soak" or something... I could be wrong but still, kind of a bad place to place an ECU.
agreed, idk why....smh :/
A mechanic I spoke with said it wouldn't work if I just plugged it in. He said the ecu needs to register with the vin?
He wants me to pay 200 to have him tune it or something
Yes the ECU needs to be married: ruclips.net/video/p4JbHSR6FMg/видео.html. If you happen to be local to phoenix, az, I’d do it for $75. If so, DM me on IG: @auto.autopsy
Thanks! This was super helpful.
My Saab 93 is showing an error code of p1523 throttle mechanical cannot reach closed position. Do you know what part i’d need to change?
Real quick question. I got a donor ECU that needs to be flashed, do I need a tech 2 or other ways? And how much would this cost if I brought the ECU to a shop? Thanks
Been dealing with some misfires lately and barely made it home last night. Got codes p0201, p0203 and p0204 injector open circuits. P0301 cylinder 1 misfire. Is this what a bad ecu will do or might there be something else to check? Always helpful vids, thanks for posting
Thank You...We Appreciate You!!!!
Happy to help!
Thanks man I thought it was under the seat mine had flooding inside
can a bad ecu cause turbo not to go all the way into boost my 9-3 isn’t going into full boost
I commented on one of your videos last week. Thought it was a boost problem but I got the p0204 p0203 p0201 and p0245. All those point towards a fried ECU from what im reading on forums. Can i use one from a 2007-2011 and does it need to be from a car with manual transmission? (Mine is manual) its a 2007 93 2.0t
Nope just make sure the part number is the same
I know this video is a year old. I am having trouble finding ecu for a 2007 9-3t, any recommendations?
Saab 2004 93 ARC 2.0T P0687 p0686 any ideas? I got a donor car same year, but it's a linear and 5 speed manual. Went to swap the ECU because I'm hearing that's the likely problem, but when I turn the key, nothing happens. I heard it needs to be flashed, no idea how I do that or how much it would cost. Any help would be very appreciated. Thanks.
This might be a dumb question but is the ECM what controls the spark and fuel delivery? I've had this issue of cylinder number one leaving the fuel injector wide open continuously. I was told that I needed a new computer but I wasn't completely confident that that was the answer. Any thoughts?
I have a 2007 Saab 9-3 2.0 and it does the same thing and it blows white smoke out the back with gas and they said it’s the ecu and I got it sent away to get reprogrammed and it should be here tomorrow I’ll let you know what happens
@@kevincarboni5072 thank you.
^
@@kevincarboni5072 how did it go?
???
Is this ECU the same of PCM?
Hey man, do you disconnect the battery on your 9-3 whenever you work on electrical stuff? Is it necessary?
not necessary for a lot of stuff, but it's definitely not a bad idea!
Si Disculpa tengo un saab 2005 93 que no me quiere este prender le doy al switch y no da nada a él está está perfectamente bien pero siempre me hace lo mismo que crees Que será Me podrás ayudar
Have you tried jump starting it or replacing the battery? if it has no power i would start with simple solutions like that.
Should you disconnect the battery if you are doing this?
No you dont need to. I didnt.
Wouldn’t be a bad idea but I don’t think it’s required.
not a bad idea, but necessary as others said
Hey. Where can I get a reliable ECU for my 06 9-3 2.0T? Mine in failing. I don’t really trust eBay.
hey my ecu is broken and now i found one but its not from a car with the same specs like mine is...(part number aint the same too) well could i still just marry it with tech 2 and i would be good to go?
if the part number is the same it should work
So I have a 2008 93 aero and I’m looking to install the turbo x rear spoiler on my car, do you know the best way of going about that?
you'll have to drill holes in the trunk lid
How can I program now ECU using Autal 906s pro scan tools
You can’t. You need a tech2 or OBD red cable tool with software on your computer: ruclips.net/video/p4JbHSR6FMg/видео.htmlsi=5YhQpiixvTAN5wj4
I have a 2003 5 speed manual I think the ecu is bad. I have a 2007 rusted out part car that is an automatic. Can the ecu from the 2007 automatic be married to the 2003 manual.
yes it can; there's information online regarding the process
thanks for the video, i will leave a like for sure.. do you know if fuel injectors need to be replaced when ECU is replaced due to code p0201? thanks
not usually; i would avoid driving it until you get a replacement ecu though
I'm getting a bunch of codes for all fuel injectors stuck open, turbo wastegate malfunction, catalytic converter threshold, and traction stability. I believe my ecu is the culprit. I have a 2005 9-3. Now I grabbed a 2004 and 2005 donor ecus from a junk yard... my fiance mixed them up. Will they both work in instance for an ecu swap?
both will work, but they need to be married to the car with a tech2
If I had to replace the ecu with one from another car what else will I have to transfer from the Doner car as I don't have access to tech2
Please see this video here: ruclips.net/video/p4JbHSR6FMg/видео.html
hi i got a new refurbished ecu he couldnt get the data off my old one so i had to take the car to them , picked car up got half way home the engine light come back on so drove it home as it drove normal tried it again it had loss of power i checked it with my cheap scan tool it comes up knock sensor 1 circuit bank 1 or single , i rang the place where i got ecu from he told me to send it back which i did i fitted it yesterday 20 min engine light came back on checked with my code reader it says the same thing knock sensor 1 circuit bank 1 or single. ant suggestions where to look thank you
You don’t need to take the data off your old one. You just need to put the new one in and marry it
ruclips.net/video/p4JbHSR6FMg/видео.html
Hi, you need reteach new ecu by tech2 otherwise would not start up your car. Or is it plug and play?
No, not when it’s the same ECU. This video was made for demonstration purposes. If you are putting a new/different ECU in, it will need to be married, as I said. Not if it’s the same one though.
What happens if u dont do the gift thingy? Cant i just replace it with another same model??
Gift thingy? Do you mean marrying the ECU? That is required (and can be done by the seller of the ECU sometimes) to ensure the vins match
@@AutoAutopsywhat happens if u dont do it? Im about to order a Tech2
I have a 2008 Saab.. could u tell me if the ecu is in the same location ? Could anyone tell me..? I would greatly appreciate it. I can’t find much info online. Thanks so much.
any 2.0 9-3 will have it in the same location
Do i need to disconnect the battery before replacing the “new” one?
Ideally yes.
I send my ecu to a guy who clone it to a new one, because of the P2045 P0201,2,3,4 causing misfire, the engine start to shake after the replacement… he asked me if I disconnected the battery before.
hi i just scanned my Saab 93 2006 model the code is P0606 i rang a place here in Australia he said it could be loose computer ground blown computer fuse or a sensor how would i know which one it could be
check both.start with the fuse
@@AutoAutopsy where would i find the fuse and what number would it be please
I’ve had my SAAB for 5 years now, unfortunately the last 1 1/2 years haven’t drove it. Can you give me an idea on how to find out if it’s bad? My car runs normal for a minute or 2 then engine light comes on & Runs Really Rough No power.
i would start by scanning the codes with an OBD2 tool
Hello. I am currently in CIM confusion hell lol
I was wondering if I purchased a used CIM and ecu of of a 2006 saab 9-3 and install both on my 2004 9-3 would it be logical to assume that it will work?? Assuming I have a key that is also married to that replacement CIM
It should. Although different years and different part numbers so I’d be wary of that
Did it work? Can u give me an update please?
Thanks!
:)
Hola amigo!! Estoy por reemplazar la ecu de mi saab 93 2006 2.0t he pensado en clonar la ecu tienes algún vídeo sobre que plataforma usar? he leído acerca de trionic- can flaser? Cualquier ayuda se agradece desde ya
You'll need a tech2 to marry the new ECU; i don't have any videos on that process
www.trionictuning.com/forum/viewtopic.php?f=68&t=8094&sid=0ad1e5ee03b763f1e06b4d7db3b748bc
Hey man, my 2006 Saab 9.3 2.0T has a few codes from my check engine light. Steering wheel lock malfunction, anti lock malfunction, stabilizer malfunction that pops up on my car randomly sometimes. I don’t work on my car myself. I’m too worried I’ll destroy it. Are theses problems common? Or should I be thinking about another car. Last time I took my saad to the shop it cost me over 100 for spark plugs. And since I owned this Saab I only had to replace the starter and get a new fab. I love this car it’s just extremely hard to find part and a mechanic to work on it.
location?
This man will get you sorted, especially if you're in the Phoenix area ^
Indian sadly.
Indiana
My dad bought the same make and model as you and we have the same problems😑 it seems to be working good as of now, but it also used to start smoking. We tried going to shops, but they can’t seem to find the problem.
Will any ecu from a 2.0T work from 2003+ or is it year specific?
Sometimes part numbers are different. Check and confirm it’s the same
Do you happen to have videos of any walkthroughs of the tech 2? Like what do I need to purchase , where , did you need a kandi , and what type of computer do I need etc ?
I could do one at some point; you need something with windows 10, a saab card, candi if you're working on NG 9-3's.
Thanks bro
No problem
Perfect time for my P0245 code. Seem like my ECU is done. Do you know where I can find a replacement or refurbished ECU? Mine is only 2010, so any used one should be older than mine. If my 10 years old one failed, why I go buy a used one? I'm in Texas, maybe it get something to do with it.
saab facebook groups; they're littered with people who can replace/clone an ecu for you
@@AutoAutopsy Thanks.
Those groups are full of dick butts tho so be careful.
Do you absolutely need a tech2 to replace the ecu ? Is there another way ??
you need a tech2 to marry the ecu; chances are you can find someone relatively close to you who has one. I would advise posting your problem and location in some saab facebook groups
@@AutoAutopsy Thanks. Anyway I can download the softwares needed on a laptop ?
Greetings bro... Any recommendations of where to purchase a new ECU already programmed for my 2006 9-3 or should I program it myself with Tech 2
Hirschmann Koxha are a good company for that
Donde comprar una ecu nueva ya programada?
i would post on some saab facebook groups to find a new one; it'll be the cheapest and easiest way
Where do you recommend buying a ecu?
Facebook groups are the best place to find them secondhand
Got lucky, no vacuum lines for me 😂 I assume someone else relocated it because my ECU looks pretty clean
Or they might be different for other model years. Not 100% sure tbh
@@AutoAutopsy also possible, I have a 04 linear
Is it hard to code the new ecu?
You need a tech2 with security access
Can you drive without an ECU?
The car won’t start or crank without one lol
I need ecu fo my saab9-3 2005 2.0 turbo
eBay, facebook groups, etc.
Is there a difference between the ECU and ECM? And what about the PCM?
ECU/ECM are the same, as is PCM i believe..usually all referred to as an ECU (on these cars at least)
unbolted all the intake system to change the PCV valve and it's really not that difficult. I though it was worse XD
ooof
@@AutoAutopsy all of that for nothing because it was good 😂
But cleaned the LPG system and intake at the same time
Too bad they moved away from putting them in a closed cavity in the top of the fenders like the old 900 Classic. Dry and cool.
Yep.... :(((
688000km no ecu problem
wow
Noti gang!
:)
You should get a cold air intake in the Saab 9-3
i'm happy with this
Scotty’s Kilmer latest video trash talked Saab and called them trash
Really what’s the name of the vid
I found it
Scotty kilmer also loosens engine pulleys by jamming spanners against them and cranking the engine... I get a strange vibe from that dude
link it! smh
He also has videos that praise Saab too.
my saab is shootin a code of P0687
So, plug and play is a big LIE?...
no, it needs to be married
Also don't use official torque values for the ignition coils ... I already broke 2 bolts. Lucky me I managed to get them out. It was scary.
jeez
Is Ecu and TCM the same thing on 2004 Saab 9-3 Linear Turbo..Automatic Transmission
no