Amazingly detailed, close-up illustration of new brake shoes installation. As always, beautiful (except for the brief camera tremors section, lol!) camera work & editing.
Thankyou Robert, I'm getting better 👍🏻👍🏻 (shakey camera.... phone updated and switched off anti camera shake thingy somehow) 🙄 but I must say I'm loving Davinci Resolve!!
Great video! You are an excellent teacher. Your brakes are just like the set up on my '68 Fury. When I first got the car in 2009, it had an odd tendency to self over adjust the rear brakes which apparently was an odd '68 only problem. The fix was to get the 1969 and up self adjuster kit which I got from Rock Auto. The new self adjusters look just like what you have on the '72 Chrysler and solved the problem neatly which when I got new brake shoes, there was a use for that pin finally. That brake tool you're using is a godsend. The one I have is at least forty or more years old and saves me a lot of grief.
Thankyou for your kind words Patrick. I do my best to help people do this kind of thing for themselves if they've had no previous experience. It's not as daunting as it first appears when you're able to see how it's done beforehand. By the sounds of it; 68 was possibly the change over year for the self adjusters?!
Great job George. I have a 67 300 which I've done numerous times. Nice tutorials. The only thing I hate about these drum brakes up front is that they are very finiky. You have to adjust both just right so the steering wheel doesn't pull to one side when braking. I also have issues sometimes when making sharp turns you hear the brake shoe grinding against the drum. It mostly occurs when making a sharp right turn.
I'm sorry George, but the brake springs for the rear adjusters were indeed installed correctly. You have them installed backwards. The short end of the springs go on the brake shoe side. Also, the front brakes were pre-assembled onto the backing plate before they are attached to the spindle from the factory for ease of assembly. Good show dude. 😉
Thanks Ghett SUMM, but both sides were different, so I went with what looked and felt safer. Any bad jolt and that short end of the spring would have come out of the shoe for sure, especially on the new shoes anyway 👍🏻 Thanks for the info on the front drums... I wondered why they were so hard to access 🤣🤣🤣
@@SortedGeorgeGarage hi Steve here do you happen to have a contact number you could be reached on ? Questions regarding my 66 new yorker . Send it privately if you like ? Thanks Steve
good video , i have a 70 fury with 4 wheel drums ...i need a spring kit in the front 11 inch drums , are the front kits the same as rear kits ..in the pictures they all look the same
Love the video I got 1967 new yorker really enjoy driving it Got slight issue with it when i brake there a air hissing noise do you have any idea what it could be and what parts it may be
To be honest Kevin, the only thing that would give a hissing sound is air, and the only parts of the brakes that uses air would be the servo, hose from servo to pcv valve or pcv valve itself. I'd start with them. Hope it helps. SGG 😃👍🏻
@@SortedGeorgeGarage its another video. I'm doing my axles too on a 66 windsor. I'm gonna get the MO400 green bearing kit they want that bearing retainer to be within .005" flattness or the bearing will fail. thanks for replying though, God Bless
Spring kit was already on the car. Set for 66 is different from newer models. Self adjusting arm is different on later years. Hope it helps.... SGG 😎👍🏻
@@SortedGeorgeGarage Its on my hot rod which happens to be 55 F100. All I know its a 742 Diff 8 3/4 axle with 11" drums. Currently no self-adjuster just a spring. I'm curious your thoughts though. is it wise to just keep current configuration with no self-adjuster or do you foresee any issues if I upgraded the springs to have a self-adjuster? Any advice will do. I'm learning as I go :) - Great videos btw.
@@jvilledjango Thanks bud, I do my best when filming for close ups etc. So people can see clearly what's going on. I learn as I go too 🤣🤣 I'm no mechanic, just a Fred in the shed showing how easy it is to do 😁😁 Have a look down my list of videos.... there you'll find a video on the brakes of my 72 New Yorker. You can see the slight difference in the self adjustment mechanism. Some people like the self adjusters, some people just ditch them if they can't work out how it all works 🤣🤣 It won't matter either way if you have them or not, it just means you'll have to keep an eye on your rear brakes and adjust manually that's all bud. Hope it helps 😃👍🏻 Enjoy your HotRod 🤘🏻😎 ......SGG
The only thing I noticed you didn't do was clean and put some lithium grease on the shoe platforms. That's a very nice car. I had a 65 Newport years ago.
Amazingly detailed, close-up illustration of new brake shoes installation. As always, beautiful (except for the brief camera tremors section, lol!) camera work & editing.
Thankyou Robert, I'm getting better 👍🏻👍🏻 (shakey camera.... phone updated and switched off anti camera shake thingy somehow) 🙄 but I must say I'm loving Davinci Resolve!!
You are a right proper brake buggerer, Guvnor.
🤣🤣 it's proper innit guv 🤘🏻😎
I just bought a 66 New Yorker and I am watching with interest!
Thanks Zack. I hope these videos help you out 👍🏻
I'm going to do this to my -65 Newport in June. Thanks allot Mister.
You're welcome Ronny 👍🏻
Great video! You are an excellent teacher. Your brakes are just like the set up on my '68 Fury. When I first got the car in 2009, it had an odd tendency to self over adjust the rear brakes which apparently was an odd '68 only problem. The fix was to get the 1969 and up self adjuster kit which I got from Rock Auto. The new self adjusters look just like what you have on the '72 Chrysler and solved the problem neatly which when I got new brake shoes, there was a use for that pin finally. That brake tool you're using is a godsend. The one I have is at least forty or more years old and saves me a lot of grief.
Thankyou for your kind words Patrick. I do my best to help people do this kind of thing for themselves if they've had no previous experience. It's not as daunting as it first appears when you're able to see how it's done beforehand. By the sounds of it; 68 was possibly the change over year for the self adjusters?!
Very clear and most helpful!!
Thanks bud I'm glad it helped 😃👍🏻
Great job George. I have a 67 300 which I've done numerous times. Nice tutorials. The only thing I hate about these drum brakes up front is that they are very finiky. You have to adjust both just right so the steering wheel doesn't pull to one side when braking. I also have issues sometimes when making sharp turns you hear the brake shoe grinding against the drum. It mostly occurs when making a sharp right turn.
Most welcome boss man🤘🏼💪🏼
🤘🏻😎
I have a 68 New Yorker, thanks for the help... although I don't know how u did that lower spring with just pliers. I had to use a puller😮
11:04 those shoes are different. see the pad surface is clocked different from another. 1 is made to go toward the front
16:11 ok you got it
Yeah this gets mentioned at 15.38 👍
I'm sorry George, but the brake springs for the rear adjusters were indeed installed correctly. You have them installed backwards. The short end of the springs go on the brake shoe side.
Also, the front brakes were pre-assembled onto the backing plate before they are attached to the spindle from the factory for ease of assembly. Good show dude.
😉
Thanks Ghett SUMM, but both sides were different, so I went with what looked and felt safer. Any bad jolt and that short end of the spring would have come out of the shoe for sure, especially on the new shoes anyway 👍🏻 Thanks for the info on the front drums... I wondered why they were so hard to access 🤣🤣🤣
@@SortedGeorgeGarage hi Steve here do you happen to have a contact number you could be reached on ? Questions regarding my 66 new yorker . Send it privately if you like ? Thanks Steve
You are correct.
Where did you get the front drums with the studs pre installed? i ordered some from rock auto and they sent me the slip on kind
Dylan they were already on the car. I just bought new shoes etc. I didn't need to buy the drums. Hope it helps.... 👍
good video , i have a 70 fury with 4 wheel drums ...i need a spring kit in the front 11 inch drums , are the front kits the same as rear kits ..in the pictures they all look the same
Hi JG, as far as I'm aware yes they're the same 👍🏻
Love the video
I got 1967 new yorker really enjoy driving it
Got slight issue with it when i brake there a air hissing noise do you have any idea what it could be and what parts it may be
To be honest Kevin, the only thing that would give a hissing sound is air, and the only parts of the brakes that uses air would be the servo, hose from servo to pcv valve or pcv valve itself. I'd start with them. Hope it helps. SGG 😃👍🏻
@@SortedGeorgeGarage I will start there thanks
17:45 ok the axle seal?
At 17.45 there's nothing mentioned in this video regarding an axle seal....😶
@@SortedGeorgeGarage its another video. I'm doing my axles too on a 66 windsor. I'm gonna get the MO400 green bearing kit they want that bearing retainer to be within .005" flattness or the bearing will fail. thanks for replying though, God Bless
Curious what spring kit your'e using here?
Spring kit was already on the car. Set for 66 is different from newer models. Self adjusting arm is different on later years. Hope it helps.... SGG 😎👍🏻
@@SortedGeorgeGaragethanks! Mine dont have a self-adjuster. Just a spring and adjuster. Possibly older?
@@jvilledjango if it'll work then sure. Make sure you have all the correct parts for your car's year 👍🏻 What vehicle do you have?
@@SortedGeorgeGarage Its on my hot rod which happens to be 55 F100. All I know its a 742 Diff 8 3/4 axle with 11" drums. Currently no self-adjuster just a spring. I'm curious your thoughts though. is it wise to just keep current configuration with no self-adjuster or do you foresee any issues if I upgraded the springs to have a self-adjuster? Any advice will do. I'm learning as I go :) - Great videos btw.
@@jvilledjango Thanks bud, I do my best when filming for close ups etc. So people can see clearly what's going on. I learn as I go too 🤣🤣 I'm no mechanic, just a Fred in the shed showing how easy it is to do 😁😁
Have a look down my list of videos.... there you'll find a video on the brakes of my 72 New Yorker. You can see the slight difference in the self adjustment mechanism. Some people like the self adjusters, some people just ditch them if they can't work out how it all works 🤣🤣 It won't matter either way if you have them or not, it just means you'll have to keep an eye on your rear brakes and adjust manually that's all bud. Hope it helps 😃👍🏻 Enjoy your HotRod 🤘🏻😎 ......SGG
The only thing I noticed you didn't do was clean and put some lithium grease on the shoe platforms. That's a very nice car. I had a 65 Newport years ago.
Thanks 66. If you're referring to the 3 pads either side of the shoes, I put copper ease on the back plate rather than the shoes 👍🏻
👍
Hope it helped 318 🤘🏻😎
Hit that subscribe button too 😃
All the best......SGG 👍🏻
@@SortedGeorgeGarage Been sub'd for a while!! 👍👍
@@318willrun Cheers Buddy, thankyou 😃👍🏻
You should be using Channel Lock pliers NOT a ratchet, my Friend.
miss daisy
Job Job