I just wanted to thankyou for this video. I had a dead MP2 battery. I followed your steps and charged my battery with a 12v rc charger like you said @ 2.0a for 30 mins. Reassembled and now I have a working battery! Battery had only 2 charges before it went dead. Again THANKYOU! 🙂
It just doesn't work, i've tried with two batteries. As you can see in the video the LEDs are working but i guess that is just function of the current capacity. He is faking the connection to the charger simply because it won't charge. BMS is not providing/requesting current once you turn on the battery most likely because it is in a sort of safe mode (i guess saved in an eeprom). There are some videos about i2c communication with BMS but people reported it is not working anyway
Thanks for sharing your feed back on fixing the mavic battery! kindly advice my mavic was crashed in pool, (drone I had recovered it) but battery was similar case but gradually its dead even no blinking light. I can fix it with the same way which you did? let me know thanks
This was what i was looking for, as i understand this it is effectively resetting the microprocessor on the main battery circuit board... bravo!! 👍🙌🙌🙌🙌🙌🙌🙌
*arkadaşım ben geldim herzamanki gibi güzel bir video hazırlamışsın ellerin dert görmesin o değerli yorumlarınıda kanalımda görmek isterim bu kardeşinide unutmayasın herzaman yanındayım allah kolaylık versin iyi günler diliyorum görüşmek üzere hoşçakal mektubuma burada son verirken önce......acele cevap beklerim!!!*
I just got a brand new battery and first time I tried charging it, it's blinking like your was. Is the idea just to remove all power from the circuit board for a minute then reconnecting power resets the battery somehow?
i have a similar problem, my battery says broken cell but is charging and all only one cell voltage is lower similar to not balanced, with 2 cells at diffrente voltage: cell's 4.24V then 4.23V then 3.87V?
I didn't understand what you done? You only disconnected the battery positive cable is that to empty the accumulators? What was the proble a circuit board error? Thanks
@@hobbychanel5798 I see, similar to a batery reanimation, like wen some one uses the batery all the way to zero percent and the batery will not charge again it need some stress inpulses to start charging again/some times, other times over discharge kills the batery or the cell
Hi...I from Brazil... my battery dont charger... the volt is 11,50... I remove red cable...balance cable... qnd no fix the ploblem...what to you beleve? Tks
Big like amazing vid ..realy informative..thanx for sharing
It's okey 👍🏽
I just wanted to thankyou for this video. I had a dead MP2 battery. I followed your steps and charged my battery with a 12v rc charger like you said @ 2.0a for 30 mins.
Reassembled and now I have a working battery!
Battery had only 2 charges before it went dead.
Again THANKYOU! 🙂
good
It just doesn't work, i've tried with two batteries. As you can see in the video the LEDs are working but i guess that is just function of the current capacity. He is faking the connection to the charger simply because it won't charge. BMS is not providing/requesting current once you turn on the battery most likely because it is in a sort of safe mode (i guess saved in an eeprom). There are some videos about i2c communication with BMS but people reported it is not working anyway
I had to leave a comment just because it worked for me too thanks alot for your video.
Super icad çokk beyendimm👍👍🔔🔔
Hello friend my super 👍 Very good your vídeo
hello, do you have any other procedure? this didn't work. cells are charged, but the controller does not allow charge or release energy.
👍 Danke und Liebe Grüße aus Germany😉
Çok güzel anlatım ve çekim olmuş emeklerinize sağlık
Thanks for sharing your feed back on fixing the mavic battery! kindly advice my mavic was crashed in pool, (drone I had recovered it) but battery was similar case but gradually its dead even no blinking light. I can fix it with the same way which you did? let me know thanks
Nextsss.... ish orrrkehh!
Verriiii guuuud videeooohhh!
Dude. You killed it. Many thanks! It is OK ❤️. Peace.
thanks for your video
Thanks for sharing knowledge 🙏🙂
This was what i was looking for, as i understand this it is effectively resetting the microprocessor on the main battery circuit board... bravo!! 👍🙌🙌🙌🙌🙌🙌🙌
So if I had error on battery then I have to reset it right?
Nice reviewing different devices👍👍
On and off the charger while working the indicator for a few minutes at a time can do the same thing. 3rd round and battery is now taking charge.
Hi, how exactly you do this? I'm having difficulty figuring this out to fix my battery
Günaydın kardeşim güzel paylaşım için teşekkürler
bilgilendirme için teşekkürler sonuna kadar izlendi
Like 17
Əməyinizə salık
thank you my friend. good video. 👍👍👍now i understand.
Thank you so much! It worked like a charm !
did u try this out bro? is it work?
Very nice Video! I have a similar battery
I will try. I hope it resets.... OK !
Thank you
Good job
Çok güzel video👍34🍃🍁🍀
Like #159. Very interesting video! Thanks for sharing!!
Excellent video I’m going to try
Did you try it?
He changed the internals from the good battery to the shell of the bad one
Jack Frost ,I am thinking the same thing .
Nice video likes48
It's not Okay didn't work for me still getting that flashing green light.
The best my battery have the same problem... solutins excellent
Güzel paylaşım emeğinize sağlık👍
Good
Good Sharing
guzel video olmus Erhan abi,benimde 2 pro arizali bataryam var, drona drek taknca calisyo,yani direk 16v verdigi icin,halbuki oyle olmamasi lazim.
Gud job
💔🌷💃😁wao buen trabajo mi amigo saludos desde maryland 👍🇺🇸
Great job dear👍❤👍
Great video what was the temperature used on the solder iron?
guzel paylasim
Great job Hobby please, I have a Mavic Air battery dead for a year, will it be charging 12V and 2 m It will charge again. Success on your channel.
Thank you
Great idea! Many thanks.
its ok! next ! great video!
A big thanks
Someone needs to figure a way to jump the pins on an unopened battery to reset it and get it to charge
Am I right in thinking by removing the positive connection then Reconnecting your trying to reset the board .
Good evening dear 👍
Is the BMS board not locked, sir?
Приветствую, я так понял видео о реанимации батареи к квадро коптеру, ЛАЙК!
Hayırlı geceler kardeşim ben geldim burdayım ya siz neredesiniz
*arkadaşım ben geldim herzamanki gibi güzel bir video hazırlamışsın ellerin dert görmesin o değerli yorumlarınıda kanalımda görmek isterim bu kardeşinide unutmayasın herzaman yanındayım allah kolaylık versin iyi günler diliyorum görüşmek üzere hoşçakal mektubuma burada son verirken önce......acele cevap beklerim!!!*
Привет!!!лайк за видео 👍👍👍
Emeğinize sağlık komşum ☺️
Hediye bıraktım çok güzel olmuş ellerine sağlık banada gelisen sevinirim☕👈
YİNE MUHTEŞEM VİDEO42
I just got a brand new battery and first time I tried charging it, it's blinking like your was. Is the idea just to remove all power from the circuit board for a minute then reconnecting power resets the battery somehow?
Cable disconnection charges the battery with a 12-volt charger.then glue the cables again
How did you cut the case of this Mavic Pro Battery? I have a battery doing the exact same thing and its only got 13 charges on it..Thank you
right, hey here's how you fix it. But im not showing you how to actually get in the case. Okay guess im just buying a new battery then.
@@kylehanz1230The case is glued as is next to impossible to take it off without damaging it
👍🏻👏🏻
Yine yineden harikalar
:) :) :)
Canyou a same video about mavic air batterie. Thank you, I have two and no flash and no charge.
measure how many volts the battery shows
you open batterie number 4 and you tested batterie number 1
👍👍👍👍
So discharge the capacitors on the board and reconnect voltage. Resets chips?
Abimmm bilgilerincun coxxxxccc sagol
Thanks mate!
Teşekkürler tanıtım için...
Thank you , you just saved me 100€ thanks!!
Good 👏
Yusuf Pirgali
did you try ?
Güzel kolay gelsin 👌🏻👍🏻
Tanks for it
Guzel video
36 like süper 👍
Kolay gelsin başarılar 👏
Hello sizin videolar iyi ki var yeni cihazları tanırken yabancı dilde öğrenicez Erhan bey
😀 😀
👏👏👏
Çok güzel olmuş
Stay connected
контролер не заблокировался после отключения питания балансира и силовых проводов
Can you recommend a good reliable replacement battery for the mavic pro 1?
What have u done with how it's repair ..give me some knowledge
Lo que hiciste fue un reset de la plaqueta?
I have tried this methode but doesn't any good for my case...
how good are you at this :)
i have a similar problem, my battery says broken cell but is charging and all only one cell voltage is lower similar to not balanced, with 2 cells at diffrente voltage: cell's 4.24V then 4.23V then 3.87V?
You changed the batteries..
I didn't understand what you done? You only disconnected the battery positive cable is that to empty the accumulators? What was the proble a circuit board error? Thanks
when the battery falls below the minimum it does not charge. You need to charge the battery with a 12 volt charger
@@hobbychanel5798 I see, similar to a batery reanimation, like wen some one uses the batery all the way to zero percent and the batery will not charge again it need some stress inpulses to start charging again/some times, other times over discharge kills the batery or the cell
@@RicardoTheCraneOperator yes
it's ok
you are hilarious great job next time do it in the Russian language we can translate.
I just do it like your video....but it don't work. That voltage baterry was 12v by other charge...can you tell me how to fix it...
THANK YOU
tried that several times with no success. still blinks with no charge taken from the charger
40+подписка 😊 привет! Вот и я уже с тобой 😊
It's okay...
Лайк
Dizem se tira o possitivo da placa ela morre de x
Hi...I from Brazil... my battery dont charger... the volt is 11,50... I remove red cable...balance cable... qnd no fix the ploblem...what to you beleve? Tks
Çok iyi👍👍
It's ok
VOLTAJJJjjjjjJJJJj like much. SHARGER guut GUUUTTTTTTTT