Thank you so much it worked , i went and bought the same size tools and new sensor and went changed it my self saved about 1 hour of labor from mechanics,,, god bless you wish you more wealth and health love you guys , a sub for ever
Thank you so much. All the videos have all the valueable information in them. Even if you are taking it to any shop you have a better idea what and about how much it should cost if you provide the right part.
Part number for oil pressure sensor D12 23713681. To be able to unplug computer harness you have to use first 12 mm socket, then unplug like he do on video. Sensor harness remove turning to left and socket for sensor is 30 mm must be deep one. I hope this help.
Update... When you move sensor harness to the left side all the way up, then in my case I have to use long screwdriver and put it under that plastic and pushing up from left and right side,then i finally take of the harness from sensor...it was pain in the ass. Then take rachet and deep socket 30mm and take out sensor. You don't need to remove fuel sensor at all. Oil sensor is on the top, fuel is on the bottom. Just in case you don't have sensor you can use sensor for fuel put it on oil sensor spot and bad one put it back on fuel spot. For fuel is not important like for oil and at least it will get you home with out shitty noise and red triangle.
HI, love your videos :) I have a 2012 670 with a automatic and D16. I keep getting the same warning for my coolant temp but every time i pull over and check it its full.And the gauge on the dash showsd good normal operating temp around 185. I think i may need a new sensor the STOP warning and buzzer and the critical message are a bit annoying. Do u have any videos replacing that sensor?: Thanks ....Neil
I just changed my oil pressure/temp sensor with after market but now I get no temp reading is this because aftermarket? I tried 2 different ones same thing no temp reading my original OEM would read temp I had to change because the head of the sensor was damaged and leaked.
@@otrperformance I have a stop engine fault light come on but did not shut the truck off. fuel level is good gauges good all levels good. Diagnostic saying or oil thermostat active
Thank you so much it worked , i went and bought the same size tools and new sensor and went changed it my self saved about 1 hour of labor from mechanics,,, god bless you wish you more wealth and health love you guys , a sub for ever
Thank you so much. All the videos have all the valueable information in them. Even if you are taking it to any shop you have a better idea what and about how much it should cost if you provide the right part.
Very valuable information indeed great help Thanks
Thank you for everything. You saved me again
Happy to help!
The one below that is the crankcase pressure sensor.
Are the pressure and temp sensor the same or two different ones
Part number for oil pressure sensor D12
23713681.
To be able to unplug computer harness you have to use first 12 mm socket, then unplug like he do on video. Sensor harness remove turning to left and socket for sensor is 30 mm must be deep one. I hope this help.
Update...
When you move sensor harness to the left side all the way up, then in my case I have to use long screwdriver and put it under that plastic and pushing up from left and right side,then i finally take of the harness from sensor...it was pain in the ass. Then take rachet and deep socket 30mm and take out sensor. You don't need to remove fuel sensor at all. Oil sensor is on the top, fuel is on the bottom. Just in case you don't have sensor you can use sensor for fuel put it on oil sensor spot and bad one put it back on fuel spot. For fuel is not important like for oil and at least it will get you home with out shitty noise and red triangle.
Can you do coolant temp.sensor replacement please?
Btw you doing a great job!
Do you have video of crankshaft position sensor.
After step one notice the location of sensor and cus for about 2 mins
HI, love your videos :) I have a 2012 670 with a automatic and D16. I keep getting the same warning for my coolant temp but every time i pull over and check it its full.And the gauge on the dash showsd good normal operating temp around 185. I think i may need a new sensor the STOP warning and buzzer and the critical message are a bit annoying. Do u have any videos replacing that sensor?: Thanks ....Neil
Thank you
I just changed my oil pressure/temp sensor with after market but now I get no temp reading is this because aftermarket? I tried 2 different ones same thing no temp reading my original OEM would read temp I had to change because the head of the sensor was damaged and leaked.
Thank you very much.
@@otrperformance I have a stop engine fault light come on but did not shut the truck off. fuel level is good gauges good all levels good. Diagnostic saying or oil thermostat active
d 13 2015 Volvo stop engine fault
Diagnostics read :oil thermostat sensor temp
sir what is the cause of the volvo d13a fmx,.the smoke is white?
It is the same spot for the 2007 D16?
Can this cause the engine brake not to work properly if not reading?
Give us a call at 586-799-4375 and our tech team will be happy to answer your question.
Can i get part number please i have volvo 2007 D12
Why green ? Is this a mp7 ?
where is the oi pressure sensor located on the d12 volvo
oil
I changed the sensor now it has the STOP warning light, beeping and cuts off
Anyone have the part number to this sensor?
Is this d12 engine or d13??
The video was done on a D12. Thanks for reaching out!
Felt like I was in Mexico.
Like
This video about nothing....
❤