Outside Faucet Replacement: Frost Free Wall Hydrant
HTML-код
- Опубликовано: 7 июн 2024
- Replacing a frost free wall hydrant, also known as a hose bib, sillcock, or lawn service. Showing the complete installation and tips and tricks.
Steps to winterize a frost free wall hydrant.
1. Disconnect hose
2. Turn off the wall hydrant
Steps to winterize a standard wall hydrant.
1. Disconnect the hose
2. Shut off the water supply to the wall hydrant at the inside of the building
3. Open the wall hydrant completely.
𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀
SharkBite Wall Hydrant: geni.us/5RYRRg
PEX Wall Hydrant: geni.us/bJ73ZdO
MIP Wall Hydrant: geni.us/79R2
1/2" SharkBite x 1/2" FIP: geni.us/bzWtO
𝗦𝘂𝗽𝗽𝗼𝗿𝘁
Want to support my channel or give back? Help me improve on these DIY videos by making a financial contribution. All contributions no matter how small are greatly appreciated!
ko-fi.com/prosdiy
Thank you!
𝗖𝗼𝗻𝗻𝗲𝗰𝘁
More DIY videos! www.prosdiy.com
Facebook: / prosdiy
Instagram: / prosdiy
Subscribe: / prosdiy
Amazon: www.amazon.com/shop/prosdiy
Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
Videos produced by Pros DIY (www.prosdiy.com) are provided for informational purposes only. Please check with all national, state, provincial, and local codes and regulations before attempting any work. Pros DIY does not assume any responsibility or liability for any damage or injury from the information provided in our videos. Please hire a licensed, certified, professional. 
Хобби
Great video, kudos for doing such a good job. I LOVED to loop idea and I have been doing plumbing for 46 years and now will be using your loop.
The video covers the main aspects of installation. It is a good idea to provide a service loop between the floor joists. Well done.
Omg. I've watched so many on this topic. But this was the real deal. You rocked it.
Very impressive video. No irritable moments. Clear and concise. No unnecessary prattle. Thanks! :-) (subscribed)
Thank you! Cheers!
That looks great, and thanks for a concise well produced video!
Side note: The hose reel will likely need replacement every year. Unless the customer goes to the effort to use compressed air to get all of the water out before winter, that things will freeze and crack once the temps get cold.
Super helpful video! Thank you.
I especially appreciate the explanation about the service loop.
Very helpful,thanks Patrick!!
Excellent video, great editing! Thanks for sharing the tips!!!
watering in the snow, and then the dog wearing the cone of shame just topped it all off. great video!
Good video, concise and to the point. Thank you.
Love the hand shaking at the hole
one of the best vids ive seen from a trades man to a trades man
Thank you Makaveli Thadon! I appreciate it. Take care!
Thanks for warning us about the extra piping. I didn’t think about that.
you have the best plumbing vids thank you
Best video on hose bibs! I just saw four others
Great video with good information. Thank you!
Excellent video, thank you!
Great Video - THANKS!!
Very good idea to leave a loop inside, especially if access to this pipe becomes impossible after finishing the basement.
This configuration should be part of the construction code.
Great information..especially this time of the year.
Thank you Bobby Whataman Jackson!
Greta video, thank you!
𝗔𝗺𝗮𝘇𝗼𝗻 𝗔𝗳𝗳𝗶𝗹𝗶𝗮𝘁𝗲 𝗟𝗶𝗻𝗸𝘀
SharkBite Wall Hydrant: geni.us/5RYRRg
PEX Wall Hydrant: geni.us/bJ73ZdO
MIP Wall Hydrant: geni.us/79R2
1/2" SharkBite x 1/2" FIP: geni.us/bzWtO
Disclosure: Pros DIY is an Amazon Associate. We earn a small commission from qualifying purchases through our affiliate links at no additional cost to you.
I just managed to install two of these for the first time the other day. You noted at 3:20 that the bib should slope down, at 2:48 I saw the C-shaped plastic shim. That shim is designed to provide the necessary slope as it is wedge-shaped and should have been installed between the bib and the wall.
Thanks for the detailed video! Please say “hello” to your dog for me too.
Thanks for the video
I had a leak inside my wall when I turned the spigot on couldn't figure out why. This video was super helpful. Wish they would've added a service loop!!!
Great stuff. Thanks
Nice work
Great job
Great vid Pat. You are the man! :-) We'd love to send you some Hose Bib Buddy plates if you'd like to demo - since the loose or difficult to secure hydrant is such a frequent problem. I'd like to point out a few things. 1. That our plate is soft aluminum and acts as a sacrificial anode for the little system - to protect the piping, valve, and connections from galvanic corrosion. 2. If replacing, often you have to make the hole bigger to get the old out and the new in. Our plate is super handy to bridge the gap and secure. The hole and the exterior can be sealed with clear silicon rather than cement or mortar. It looks much better and takes less time. (For plumbers this saves time, and possibly a return trip.) 3. The HOSE BIB BUDDY is now in Lowe's Stores too. :-) Thanks again! - Paul from BluMare Research
Thanks Dude, the video helped me out.
Thanks Paul! Cheers!
I was trying to figure out why you are watering your lawn and then quickly realized you were testing out your hard work. Beautiful work and great vid.
Thanks Ken! Ya, I was just messing around at the end. Take care!
Thanks for posting, I have no access to the interior connection without cutting the wall so hoping they included that service extension so I can do the job from exterior only!
I hope so too! If you have to cut the wall to replace, most hardware stores sell a handy spring-fit access panel. Such as: www.homedepot.com/p/Fluidmaster-Click-Fit-8-in-x-8-in-Plastic-Access-Panel-AP-0808/203763985 Good luck on your repair!
Liked this
Total Pro!
I have multiple exterior frost frees on the house. Should they all be fed from the mechanical room area?
Very helpful very interesting good job thank you Bill Brown Doylestown PA AKA dollar bill
Started watching a lot of your vids super helpful! Is there away to install a shorter frost proof wall hydrant? I am about to install a shut off valve but would like a back up. (I live up North.)
Thank you Balkeor, They sell frost proof hydrants in different lengths if needed. I've seen 4", 8", 10", 12"(most common), and 18". The important factor is that the end/shutoff of the wall hydrant is within the warm side of the home. Hope this helps. Cheers!
I've noticed that the vacuum breaker also serves another purpose. Rather than unhooking my hose when freezing weather comes, I can leave the end of the hose open and the vacuum breaker allows the water to flow out of the hose and protect from having the water stay in the frost free hydrant. Do you see it this way?
I literally have to do this job. Mine bust over the winter
Good luck on your repair!
great video.. what was that silicone you used that you could put a screw through for the hose reel?
Thank you Dave. It was an exterior sealant matched to the color of the house (Dynaflex 230). It just helps with any water that might get behind the hose reel and run down the threads of the screw.
I hate stucco finish. good vid
My backyard anti-siphon freeze proof spigot, kitchen sink cold water and dishwasher cold water have the same cold water line / pipe. Recently, the spigot does not deliver water at the same pressure or amount of water as before. I replaced the stem but the problem is still exists. I used a steel wire from a hanger to check the inside of the sillcock and there is a valve at the end of the sillcock which opens when the water is shut off but when the water is turned on again, it closes and blocks water coming out even though the stem is removed from the sillcock. Have you seen any installation configuration like this? Your reply is greatly appreciated.
Nice bedeo
The hose reel water joint connector will split unless you unravel the hose completely and drain all the water out of it
Anyone know if male threads are tapered on the hose bibs? No matter how much teflon I'm using I cannot get it to seal up without a small leak. The threads aren't stripped. In a terrible spot in a crawlspace of course.
How do you secure the bib to masonry when the screw slots don't line up with a competent foundation; i.e. a portion that was previously drilled out? Do you recommend mounting plates for this situation?
I would probably use concrete anchors if possible. In some scenarios where I didn't have enough backing to hold the hose bib in place, I added a sanded, pressure treated wood block with PL premium to the wall and then secured to that. To be honest I've never used a mounting plate but if that is going to work, you could go with that method too.
Why did you remove the service loop at 5:09
I miss the safety glasses. Great vid though!
Are you screwing straight into the silicone? I've never seen that before.
That's how they do it when making penetration in the roof for solar racking
wow..
Did you use pex-al-pex or just regular pex.
Just standard potable water PEX
Legal
Where did you get that hose reel?
Home Depot. It's a Suncast model # WTS175
Hey ... just wondering... how far in do you thread the adapter? I am installing a threaded shower valve. Is there a rule of thumb for noobs?
Unfortunately there's no rule of thumb, as some threads will thread more than others. It is more down to feel on how tight it is (I know this is a poor answer, hah). It's usually around a turn or 2 past hand tight.
@@PROSDIY That I actually quite helpful. In doing some other research it seems there is a hard min of 3.5 total rotations and a hard max of 6. As long as the 2 past hand tight puts me somewhere in there I will go with it.
Of course, I don't have a separate shut off for each valve.
GG
where in canada are u
Hi Dave, I live in High River, Alberta.
@@PROSDIY nice. i figured canada, as i saw many DAHL valves in your vids. DAHL is the best, hands down, and is made in canada. woohoo. lates
I comment
Thank you 😄
I’m not a fan of frost free hose bibs. They have a lot of parts. I like the old school ones better. They are easy to repair.
True. They both have they're pros and cons. The main concern about the old school ones is it's very common to forget about shutting the water off prior to winter.
Poor shamed pooch.
Legal