The CB or C6 error code on a Samsung washer indicates that the washer is in calibration mode. Calibration mode recalibrates the washer's weight detection, which can help balance the washer, improve its performance, and reduce noise and vibration. The washer will exit calibration mode automatically once the process is complete.
Glad to know. If you still have problems, try putting fewer clothes in. With front loaders, the weight from the wet clothes (esp blankets, etc) can speed up wear & tear on the machine.
Good job checking the filter. Did you check your hose for coins or objects? If code still appears, might check the pressure switch or drain pump. Note-I'm not a repair person.
@@ericxxonvfI learned that one of the most common reasons for spin/balance problems is that the load of clothes is too heavy. So if you tried fixing and still have a problem, try adding fewer clothes.
Does this work on top load too? Every time I wash, it gives me the uneven code! Then when I try to open it (to balance). It won’t unlock until all the water goes out (which it automatically starts doing when I hit the pause). Once it drains (but still beeping). I hit the pause again and it starts filling up again until I hit it twice to open😩
@@Thisday2564 I never fill up my washer more than 3/4 way, and sometimes smaller. This trick may have worked, as I tried it and my next loads haven’t given me this message. 🤔. I called someone out (before I realized it stopped doing it) and they said nothing shows it should be going out of balance (no hitting or banging). So they said the only thing it could be is the board which is about $800…. For that price I can buy a new washer. Anyway, it’s working fine now and I’m thinking it was this, so thank you (for now😂)
You'll know if your machine makes alot of noise when spinning. It will also not stay in the same place as the whole machine moves and shakes when off balance. If it still happens after calibrating, then try adding fewer clothes. Does this answer your question?
I did it I did it all by myself a single female 60 year old change the suspension springs and recalibrate the machine by myself🎉🎉 thanks guy
Way to go!
Short and CONCISE. Well done and thank you.
Thank you for your feedback and you are very welcome!
Okay bc all them other videos was taking me to hell n back lol 😂
This is the greatest video on RUclips. I dont even know if it will work for me but its straight to the point 🔥
Thank you ! Just what it needed !
Glad it helped!
THANK YOU SO MUCH IT WORKED!!!!!!
You're so welcome! Glad it worked!
Thank you very very much for this!!!
You're very welcome!
Thank you 🎉!!!
You are so welcome!
Has anyone tried drilling holes in the top of drum ring from the bottom to allow water from it drain????
The CB or C6 error code on a Samsung washer indicates that the washer is in calibration mode. Calibration mode recalibrates the washer's weight detection, which can help balance the washer, improve its performance, and reduce noise and vibration. The washer will exit calibration mode automatically once the process is complete.
That is correct.
Thank youuuuu!!!
You are most welcome. 😊
Think you👍
You're so welcome. 😊
Thank you I forgot how to do it I didn't want to call Samsung again
You are most welcome.
Thank you
You are very welcome!
Thank u so so much 🙏🙏
You are very welcome.
Thank you 🙏🏿
You are so welcome
Nice. Hope this helps. Thanks.
Hope so!
Thank you it. Seems to be doing something
Glad to know. If you still have problems, try putting fewer clothes in. With front loaders, the weight from the wet clothes (esp blankets, etc) can speed up wear & tear on the machine.
When it stops, it throws the sc code again. I have already cleaned the filter.
Good job checking the filter. Did you check your hose for coins or objects? If code still appears, might check the pressure switch or drain pump. Note-I'm not a repair person.
What about diagnostic
? What do u mean?
@@Thisday2564 hold spin and soil then power it on, for some reason my champagne Samsung doesn’t do that
@@ericxxonvf sorry, maybe you have a different model.
@@Thisday2564 oh
@@ericxxonvfI learned that one of the most common reasons for spin/balance problems is that the load of clothes is too heavy. So if you tried fixing and still have a problem, try adding fewer clothes.
Thank you so much❤
You're so welcome
Does this work on top load too? Every time I wash, it gives me the uneven code! Then when I try to open it (to balance). It won’t unlock until all the water goes out (which it automatically starts doing when I hit the pause). Once it drains (but still beeping). I hit the pause again and it starts filling up again until I hit it twice to open😩
Worth a try to see if it works. Have you also tried adding fewer clothes to your load?
@@Thisday2564 I never fill up my washer more than 3/4 way, and sometimes smaller. This trick may have worked, as I tried it and my next loads haven’t given me this message. 🤔. I called someone out (before I realized it stopped doing it) and they said nothing shows it should be going out of balance (no hitting or banging). So they said the only thing it could be is the board which is about $800…. For that price I can buy a new washer. Anyway, it’s working fine now and I’m thinking it was this, so thank you (for now😂)
@@denisegomez755 Thanks for the update. So glad it's working!
- - - is all that came up. The >|| button won't do its job
@nicolehickman9492 so sorry, it sounds like something other than a calibration problem.
Is it normal this washer throws a lot of water while rinsing and spins?
You might need a technician. Have you tried looking online or contacting Samsung?
Does it throw code Ur?
Si funciona!!
So glad!
Tried it didn’t work for my top load
Sorry it didn't work. Was the drum full or empty?
Que es lo que hace??
Equilibra la carga para que no rebote. 😊
Mine won’t drain the water but I’m getting that error code
Sorry that your washer isn't draining. Might be a problem other than calibration.
Just didn’t mine
Not sure what that means
So when do you do this?
You'll know if your machine makes alot of noise when spinning. It will also not stay in the same place as the whole machine moves and shakes when off balance. If it still happens after calibrating, then try adding fewer clothes. Does this answer your question?
My washer never finished the spin cycle when i clean a king size pillow, always off balance error. Takes me so long to do my bedding
So sorry, that's frustrating. Might be a different problem....or maybe too large a load.