The content Fitzee continues to put out is more valuable than most any other channels I know of... the what, how and why explanations then the step by step is invaluable to us shade-tree garage guys... thanks Fitz
TIM, IKR. MORE INFORMATIVE THAN SHOP TEACHER AND HOW TO ILLUSTRATION BOOKS. NO SUBSTITUTE FOR EXPERIENCE! AND FITZ HAS DECADES! I WISH MORE PEOPLE WERE AS GOOD AT THE WORK THEY DO AS FITZ IS! ITS BE A FAR BETTER COUNTRY!
Thank you for all your content -- I know this video is almost 2 years old but it's so helpful for me to learn from you and utilize the techniques and thought process when approaching my own work. You're a true artist. Many thanks from a younger generation!
There's only "ONE" guy in my city that I know that does this type of fabrication on cars and trucks. All the Restoration shops keep him busy. He is in high demand
@billoneil397 Agreed. There was a time when you either rolled up your sleeves and got good at something or you went hungry. Not saying those were better times, but ...
Fitzee, the more that I watch your videos, the more faith I find within myself to accomplish my restoration task at hand. My 67 Mustang Fastback is riddled with rust; you've given me the info and the inspiration that I needed to get with the program. I'm almost 70 now and a retired automotive and engine mechanic by trade. I'm a good welder and have the skills for that, welding sheet-metal doesn't scare me, but I'm not a body man. I don't have tons of money for all kinds of special metalworking tools, but I have the time and the tools that you use. I can't say thank-you enough for sharing with me the expertise that you possess. This is definitely one of the best instructional channels on RUclips. Thanks again.
Fitzee I love watching someone that takes a challenge and makes it look new again. What you are doing is a dying art and I for one will miss it. Thank you for sharing with us!
Fitzee, when I was in my 20s I would be working on something that my GPA needed repaired and I would use the old vise and ball-peen hammer and my amagination manipulate the metal to get what I
Thank You so much for taking the time to do the filming, good explaining, editing and all that to share your expertise and talent! When watching your work I never feel anxiety or stress for the process or outcome. (As opposed to watching many other persons working with something.) I like the way you take it as it comes and always find your way to the goal. Nice and easygoing with excellent craftsmanship and high entertainment level! Sincerely Anders Retired mechanical engineer Scania Trucks Sweden
i have been watching your videos for a while now, and as a panel beater myself for more than 38 years.,..i can say that you are a very good professional!..congrats!
Next week, he'll teach us how to build an entire car, starting with only a fuse box and a 6 inch section of the firewall....! You're -- that -- good, buddy!
Fitzee says "never get overwhelmed". . . That might be most valuable advice, cause this looked to be an overwhelming task, but not getting overwhelmed and taking it a step at a time Fitzee makes it simple! Getting an urge to get back a my third, thanks Tony!!
What I like about your work Fitz is that your techniques is what many true welder fitters do to fabricate things properly. I was a welder fitter for many years and in the old days we had pride in doing our work right. I can still hear my father say if you can't do a job correctly don't bother doing it in the first place. And what I like about your work! is that you kept the seams and folds in the body work to make it look original which makes car or truck or whatever your restoring to be more valuable in my opinion with proper inspections. I use to do collision work and got out of it, and became a welder fitter cause I got sick of working with rusty of junkers. When I left the body trade I began to see a lot of butchering jobs in the trade. I once saw this old italian guy replace a center post in a car with a two by two and a gallon of mud. I couldn't believe what I was witnessing. These kinds of jobs actually put peoples lives at risk. He obviously had no conscience to be doing that type of work to make a buck! it sicken me. I seen many horrific jobs done without any integrity like that. That is why many folks today stay away from collision repair vehicles because of butchers like that. If it was done right like the way you do things! there is nothing wrong with collision repaired vehicles. I have a close friend whos a autobody man and he does great work as well I've bought many cars from him over the years. Why because he can be trusted with his work ethic and Like yourself I'm quite sure you can be as well. Keep the video's coming bud. I enjoy them thoroughly..
Once I saw a German guy post something about a Italian guy ' and it stopped me from reading the post and then I replied to that comment. Sadly I did not read into it any further.
Understanding the fundamentals of auto body paneling is the key of repairing what seems to be un-repairable. Tony masters this very well. Thanks for showing in details.
I have a project that has been stalled for sheet metal for years now...Every time I start watching your videos, I just want to get out there and fabricate it all up. You're the best man, I love working with sheet metal and learning from you! THANK YOU!
You're a mad man. Crazy nuts in replacing all the metal in that ole Datsun. ( LOL) Very nice work. all looks O.E. WOW. Looks like you get as mush or more rust your way than we get in Indiana. Everything rusts. Hopefully we get to see this baby all finished.
Not to many of these geniuses left, thanks. I used to get 75 dollars to braze a half rear quarter panel on a full size, in the 60's and 70's, a lot of work with that t formed chest pin to put pressure on the joint. Not to speak of how much trouble it was to keep it straight. Great video Fitzee, thanks again.
Fitzee, you have the patience and the desire to do what others wish they had. I have watched your videos for some time now and have gained skill from you. I love a challenge and am a self taught mechanic and body man. Love your channel.
Good evening from Ohio. As always exceptional work. Currently working on a Trans Am that my son gave up on cause all the all the rot. I’m a lot more confident now because of your videos. Thanks.
Excellent job fitzee. I don’t know how many of us career restorers would attempt such a project without trepidation. My word! My hats definitely off to u. Really enjoy your tips and tricks and downright grinding wizardry👍. Very entertaining and truly worth watching because u have the talent and imagination to figure out very ingenious ways to get the job done. I hope all yr following appreciate wat they see. A down to earth excellent teacher sharing his craft. Please keep making us stick around
As a tradesman myself work like this is why we love our jobs, some trade work can be called art, and this is an example of art. That is why not everyone can do this type of work, you need to be artistic and feel the work forming under your will and knowledge. Great work Fitzee, I know how long this stuff takes, and how much patience you need.
I have been watching your videos now for about one year and have to tell you Fitzee - you are a true craftsmen. Thank you - this info goes a long way to helping me on my own Mini Moke restoration. Keep em comin!
Absolutely amazing how you reproduce stamped pieces with flat metal, if we had shop teachers like you there wouldn't be a rusty car anywhere, once again you've pulled the rabbit out of your hat, great tips 👍
Beautiful work and and so well explained. You made that complicated corner look so easy. Thanks for the great videos. I watch them all and always learn stuff.
As normal you have done it again. You are the MASTER when it comes to these type of jobs. I learn so much every time I watch your videos. You make it look so easy and I know it isn't. There are so many little pieces ,it's like a gig saw puzzle. Thanks again for your time and showing us less fortunate souls how it's done. Ronnie.
You did it again, Tony. An incredible piece of work that not many others would ever attempt let alone be able to pull off half as good as what you did. Todays lesson: Patience and being one with the metal. You never fail to come through with exceptional videos. Kudos!
I live here in California and if someone wanted a repair done with rusty metal like that, the body shops would not accept it. The person would have to go to a restoration shop paying top dollar and even they would look for a better cab before they would attempt any repair. I don't know if this is normal work in areas of the world that has rust issues but that was one hell of a repair. You basically took something that is not repairable, and turned it into something not only repairable, but repaired and it's not like it's a Rolls Royce or a Maserati, I mean it's a Datsun. Thank you for this video! Ed D
Fitzee, when I was in my 20s I'd be working on the vise with a ballpeen hammer and my amagination for my Gpa and I got 'er done...l would think to myself " man this is so cool !"... " this is like blacksmithing " I had thought, little did I know it was actually an art or lost art as some of the guys are commenting with the excellent work you do, now I'm by no means comparing myself to you because that it even close. You are amazing because of your years of experience in manipulating metal. But the point is anyone can use their imagination and get 'er done if they'd just try, the beauty of it all is that metal is is so workable and forgiving that a person can do anything with it if they would just try. And sir you make it easy to learn from. Who would have thought after all these years that I was actually working art in that little room out side of my Gpa's house and then years later come to realize that I mighty of been on to something great, I only just realized that tonight watching this video. Thank you so much for the inspiration, by the way...l am 56 years old now and that memory has always been there but you 'sir'
Continuing the comment; you sir are the Cat's meaw what a privilege to learn from you! Please keep the work coming its so worth it to us! Great job my man and Bravo for sure.
I can't begin to tell you how appreciative I am of your videos. Your teaching ability and willingness to share what you know and take the time to record it for others I am sure has been as invaluable to others as it has been for me. Thanks so much.
Tony: "I hope the tips are good..." Me: How am I not being charged tuition for this?!" By far this is the metal repair content I've ever seen in my life! When people ask why I shipped both of my cars 2,300+ miles from SC to NL, I saw them video like this that Tony has put out. Absolutely amazing craftmanship with the simplest tools!
Years ago, a friend built his own home. When asked how he did it, he said "One board at a time." That's what you know how to do, Fitzee: One piece at at time. One bend at a time. One weld at a time. Excellent!
Hi Fitzee ive been repairing rust in cars for 40 years and ive learnt so much from you, I had to repair the step in an old hyundai van and looning at the many curves and folds I thought this is beyond me. Then i saw this video and copied the methods and it was so easy , time consuming but i did a great repair to a complex area of 3 panels together but by cutting the whole rusted section out and making its component parts one by one i have saved an old van that panels cant be bought for. Thank you .
Fitzee you are fascinating to watch you work metal. You simplify it so that it looks so easy. But we all know that it is not. Every time I watch one of your videos I learn something. Please keep them coming.. I am not done learning.
Nice work..I'm 70 now and have been doing rust repair for most of my life'. You are making part that I have trouble making with my E, Wheel and bead rollers, Good job and keep doing what you do. You from the bay bye, no from the peer dear.
More, why didn't I think of that? Love the punch marking the points for the bends, so as to have both sides marked. Thanks so much again for making it easier for us.
I was looking at another channel and I came across your channel. I have been trying to do the corner piece of my car for days and could not of figured out how to do it. but after watching you do it, it gave me the confidence. Thanks for taking the time to show us your talents. Grate video man.
Fitzee; I've enjoyed all your video's..Your editing is fantastic, almost seamless..like your welds. You cram so much content into each one. I also appreciate your music choices.
Amazing as always. I did my first cut and butt yesterday 🙂 I remembered to cut at an angle like you said. Very easy and turned out well. Very pleased. Thanks Tony Graham
Watched the video twice: each step makes sense but the end result looks like magic. Decades of experience makes it look so easy and effortless. Best video on metal work
After watching all the one hit wonders online, finally an old school master craftsman who is willing to share true wisdom. Makes me proud to be a Newfoundlander😊
Hi Fitzee, you are a master. I work on my old rusty truck now and then, and I use every little tip from your show. Cheers all the way from Costa Rica. Keep up the good work!!
Holds up a partial rusty piece of metal ,,,,..I'm gonna use this as a guide / template and build a truck around it......LOL, no doubt about it brother, you do good tidy work, the thought process and plan of attack works very well for you. . 👍👍 Closest thing to factory as you are going to get.
Fitzee is definitely a 'metal man', give him an engine a gearbox, and a license plate, and he'll build the rest very well. Outstanding body work, strong frames and crossmembers, etc., but when he takes 3/4 of a rusted out fender, quarter panel, or pickup bed and cuts off the bad part and fabricates the rest of it a piece at a time to 'factory new' (or better) looking - blows me away, that is pure experienced skills, and know-how he's passing along to us all.
I so love watching your videos so much hands on I really like how you explain step by step you give the average joe confidence to work on there cars Thank you 🇦🇺
As always very informative and no fuss Your giving me motivation to get back into my 1977 mk2 escort. Thank you and we all love the long videos keep them coming stay safe mate
gotta love the CT Hat. a friend of mine owned one of the canadian tires in St John's up until a couple of years ago. I'm just about to tackle another funny rust area on my restoration project this video came just in time!
love watching you do your ''MAGIC'' you keep it simple and to the point. needs to be done in sections, one thing at a time . super helpful< use your tips on my 1940 dodge fargo extended cab resto ! BY far you are the best thing on youtube Knowledge and patience and no bull and pride in your amazing workmanship thanks FITZEE ps its 405 am where I am at lol
Been watching your videos for some time and this one inspired me to have a go at straightening out a crumpled lower section of a 1942 Nash fender, which I had previously considered hopeless. Love your common sense, basic tools, "...don't be overwhelmed" approach. The fender section came out far better than I expected and I'm very pleased with the result. On future projects I'll be looking for my "inner Fitzee" as Matt The Scrap Whisper says. :) Thanks Fitzee!
I was watching another channel today where the creator was repairing a rusted out diesel tank. He showed a patch panel he had fabricated and said: “I’m channeling my inner Fitzee”....
I say a lot, that nothing worth a damn is given away free. But here, this information you’re sharing is worth it’s weight in gold. Fritz, your the man. Ty!
I am watching this out of necessity for a project. Fitzee makes excited to learn this trade. If he has a kid I hope and pray that they take advantage of the knowledge this man possesses.
simply wow sir amazing work and the end result is awesome and the best part was as you mentioned you did it with simple tools .... no bead roller or english wheel or pixie dust haha truly amazing craftmanship
Sir, it was such a pleasure to watch this video from the beginning till the end. I love the process and watching it done step by step makes it easier to learn more from it, I need to do a similar job in the near future and it helped me a lot. 🔧
My father, Mel told me "God is in the details" as a lesson about doing things right the first time. I have learned that the devil is in those details as well. Nice job of it Fitz.
Most certainly a very professional and scientific approach!!! Your recognizing the need to maintain the location of that bottom right corner reflects a combination of observation and analysis skills and experience that is rare and a genuine pleasure to watch! Your accomplishment of this fine work with only tools available to the shade tree mechanic such as myself is an additional plus! Subscribed!
Yes, controlling rust is more important now than ever. There are no more cars with chassis, so we must keep rust under control if we are to get up to 10 years out of our cars. My car was made out of Zinc coated metal and after 19 yrs, it has no rust!!
@@simonwalters6733 you asked why someone would "dislike" his video - I'm telling you its because some guys are snobby metal working purists , they don't like piecework , everything has to be moulded and hammered into shape- THATS why they dislike' - and that's why I say "STUPID"- Check your comprehension
They are what are called "sociopaths". They get their jollies by finding a popular channel and immediately put a "thumbs down" on each new posting. They don't even bother watching the video.
Fitzee I like how you take your time and get it right.....better than NEW! no hack jobs!...... Theres a guy outta Chicago area that does the same thing with wrecked cars, even some that some other corner cutter has hacked! better than new and safer as well that's a job well done!
I heard about him from Homebuilt by Jeff in AUS. Then, more recently, from Rennch. I always think it's cool when people shout out other channels I watch!
Wow - so much learned in this video which I can apply to my restoration. I admire the way you can look at a complicated piece like this corner and make it into a great step by step tutorial. Thanks Fitzee. 👍
The content Fitzee continues to put out is more valuable than most any other channels I know of... the what, how and why explanations then the step by step is invaluable to us shade-tree garage guys... thanks Fitz
TIM,
IKR.
MORE INFORMATIVE THAN SHOP TEACHER AND HOW TO ILLUSTRATION BOOKS.
NO SUBSTITUTE FOR EXPERIENCE! AND FITZ HAS DECADES! I WISH MORE PEOPLE WERE AS GOOD AT THE WORK THEY DO AS FITZ IS!
ITS BE A FAR BETTER COUNTRY!
Thank you for all your content -- I know this video is almost 2 years old but it's so helpful for me to learn from you and utilize the techniques and thought process when approaching my own work. You're a true artist. Many thanks from a younger generation!
Magnificent craftsmanship far out of any one's league!!!
You seem so modest you do understand there are people out there who can't do what you do with high-tech equipment
That I agree with for sure Sir and that is bad.
@@endall6783 agreed. this level of fabrication is a dying artform.
Now I wonder why I spent sooooo much money on tools...wish I had found him 40 years ago. Now I’ve lost my excuse to buy more toys...I mean tools😕
There's only "ONE" guy in my city that I know that does this type of fabrication on cars and trucks. All the Restoration shops keep him busy. He is in high demand
@billoneil397 Agreed. There was a time when you either rolled up your sleeves and got good at something or you went hungry. Not saying those were better times, but ...
You've taken a seemingly overwhelming job, broken it into sections and thought us how to rebuild it to last. Thank you for your efforts.
Fitzee, the more that I watch your videos, the more faith I find within myself to accomplish my restoration task at hand. My 67 Mustang Fastback is riddled with rust; you've given me the info and the inspiration that I needed to get with the program. I'm almost 70 now and a retired automotive and engine mechanic by trade. I'm a good welder and have the skills for that, welding sheet-metal doesn't scare me, but I'm not a body man. I don't have tons of money for all kinds of special metalworking tools, but I have the time and the tools that you use. I can't say thank-you enough for sharing with me the expertise that you possess. This is definitely one of the best instructional channels on RUclips. Thanks again.
This man is with out a doubt the god of metal just think how many cars would be saved if this stuff was tough in welding school
Fitzee I love watching someone that takes a challenge and makes it look new again. What you are doing is a dying art and I for one will miss it. Thank you for sharing with us!
What a fantastic job! Not only the metal work, but the video editing also. A perfect documentary!
Fitzee, when I was in my 20s I would be working on something that my GPA needed repaired and I would use the old vise and ball-peen hammer and my amagination manipulate the metal to get what I
Brilliant work, no special tools, no magic just methodical common sense. Thank you.
Thank You so much for taking the time to do the filming, good explaining, editing and all that to share your expertise and talent! When watching your work I never feel anxiety or stress for the process or outcome. (As opposed to watching many other persons working with something.) I like the way you take it as it comes and always find your way to the goal. Nice and easygoing with excellent craftsmanship and high entertainment level!
Sincerely
Anders
Retired mechanical engineer
Scania Trucks
Sweden
i have been watching your videos for a while now, and as a panel beater myself for more than 38 years.,..i can say that you are a very good professional!..congrats!
Next week, he'll teach us how to build an entire car, starting with only a fuse box and a 6 inch section of the firewall....! You're -- that -- good, buddy!
I'm amazed that anybody would give Fitzee a thumbs down
LOL 😂😂
@@mnmccallum2385 Jealousy, the ugly sister of envy.
I don't understand why the depths of sentiments are so profound, it's kind of disgusting
I’m sure he’s come close to building an entire car with the amount of rust on some of them lol
Fitzee says "never get overwhelmed". . . That might be most valuable advice, cause this looked to be an overwhelming task, but not getting overwhelmed and taking it a step at a time Fitzee makes it simple! Getting an urge to get back a my third, thanks Tony!!
. . . At my Tbird, darn auto correct
What I like about your work Fitz is that your techniques is what many true welder fitters do to fabricate things properly. I was a welder fitter for many years and in the old days we had pride in doing our work right. I can still hear my father say if you can't do a job correctly don't bother doing it in the first place. And what I like about your work! is that you kept the seams and folds in the body work to make it look original which makes car or truck or whatever your restoring to be more valuable in my opinion with proper inspections. I use to do collision work and got out of it, and became a welder fitter cause I got sick of working with rusty of junkers. When I left the body trade I began to see a lot of butchering jobs in the trade. I once saw this old italian guy replace a center post in a car with a two by two and a gallon of mud. I couldn't believe what I was witnessing. These kinds of jobs actually put peoples lives at risk. He obviously had no conscience to be doing that type of work to make a buck! it sicken me. I seen many horrific jobs done without any integrity like that. That is why many folks today stay away from collision repair vehicles because of butchers like that. If it was done right like the way you do things! there is nothing wrong with collision repaired vehicles. I have a close friend whos a autobody man and he does great work as well I've bought many cars from him over the years. Why because he can be trusted with his work ethic and Like yourself I'm quite sure you can be as well. Keep the video's coming bud. I enjoy them thoroughly..
Once I saw a German guy post something about a Italian guy ' and it stopped me from reading the post and then I replied to that comment. Sadly I did not read into it any further.
I watched in awe. I wouldn't have a clue how to tackle a job like this but....Now I do. THANK YOU FITZEE!
Fitzee - Metal Head Genius. Thank you so much for all your tips, tricks and inspirations!
best part of this channel is Fitzee is showing us DIYers how to do this using basic tools. Other channels with fancy expensive tools isn't for me.
Understanding the fundamentals of auto body paneling is the key of repairing what seems to be un-repairable. Tony masters this very well. Thanks for showing in details.
I have a project that has been stalled for sheet metal for years now...Every time I start watching your videos, I just want to get out there and fabricate it all up. You're the best man, I love working with sheet metal and learning from you! THANK YOU!
Well stop stalling and get out at it. Show us your work when it's done too. Love seeing projects.
Me too! I just pulled the body off my car and am finally starting to Fitz it. Oops, I meant Fix it!
Wow fantastic work, I'm just getting into welding at age 53, it's great to be able to watch experts like yourself. Keep up the great content..
You're a mad man. Crazy nuts in replacing all the metal in that ole Datsun. ( LOL) Very nice work. all looks O.E. WOW. Looks like you get as mush or more rust your way than we get in Indiana. Everything rusts. Hopefully we get to see this baby all finished.
The care and pride you take in your work is amazing. With just simple tools you out do all the fancy body shops!
Learnt so much from your videos and without it I would never of been tackling my 1970 VW Type 3 rusty project
Thanks mate
You are amazing, the logic you show how the panels are assembled makes perfect sense on how to properly replicate the panels.
Your a steel surgeon. It is wonderful to see your skill being demonstrated.
Fitzee you are the true metal master buddy.
Not to many of these geniuses left, thanks. I used to get 75 dollars to braze a half rear quarter panel on a full size, in the 60's and 70's, a lot of work with that t formed chest pin to put pressure on the joint. Not to speak of how much trouble it was to keep it straight. Great video Fitzee, thanks again.
Fitzee, you have the patience and the desire to do what others wish they had. I have watched your videos for some time now and have gained skill from you. I love a challenge and am a self taught mechanic and body man. Love your channel.
Just watching you work a body man can an amazing amount of knowledge. Thank you for the continuing education.
In awe sir - very nice work. Being able to virtually hang out quietly, and observe, while you work away is great - thanks very much.
Good evening from Ohio. As always exceptional work. Currently working on a Trans Am that my son gave up on cause all the all the rot. I’m a lot more confident now because of your videos. Thanks.
Excellent job fitzee. I don’t know how many of us career restorers would attempt such a project without trepidation. My word! My hats definitely off to u. Really enjoy your tips and tricks and downright grinding wizardry👍. Very entertaining and truly worth watching because u have the talent and imagination to figure out very ingenious ways to get the job done. I hope all yr following appreciate wat they see. A down to earth excellent teacher sharing his craft. Please keep making us stick around
The expression "cutting corners" just got a whole new meaning to it ...
Amazing job ! 👍
All I can say is genius! I could never have figured this mess out before watching this. Now I'm sure that I could do this.
Your videos are about the only ones I watch a 100% all the way through. Absorbing the knowledge.
As a tradesman myself work like this is why we love our jobs, some trade work can be called art, and this is an example of art. That is why not everyone can do this type of work, you need to be artistic and feel the work forming under your will and knowledge. Great work Fitzee, I know how long this stuff takes, and how much patience you need.
I have been watching your videos now for about one year and have to tell you Fitzee - you are a true craftsmen. Thank you - this info goes a long way to helping me on my own Mini Moke restoration. Keep em comin!
Love the extra long vid Fitz! Especially when it covers sheet metal fab, thank you!
Biggest lesson for me in this video is to take your time! Thanks for another great video.
Absolutely amazing how you reproduce stamped pieces with flat metal, if we had shop teachers like you there wouldn't be a rusty car anywhere, once again you've pulled the rabbit out of your hat, great tips 👍
Great to see a newfoundlander on here. Awesome metal work. Quite the project.
Beautiful work and and so well explained. You made that complicated corner look so easy. Thanks for the great videos. I watch them all and always learn stuff.
Always a treat to watch you reverse engineer body parts and panels. Thanks for sharing your knowledge and experience.
Another metalworks masterclass from Fitzee. Please, get your popcorn bucket, your beer, seat, enjoy and learn. Thank you "Maestro".
As normal you have done it again. You are the MASTER when it comes to these type of jobs. I learn so much every time I watch your videos. You make it look so easy and I know it isn't. There are so many little pieces ,it's like a gig saw puzzle. Thanks again for your time and showing us less fortunate souls how it's done. Ronnie.
You did it again, Tony. An incredible piece of work that not many others would ever attempt let alone be able to pull off half as good as what you did. Todays lesson: Patience and being one with the metal. You never fail to come through with exceptional videos. Kudos!
I live here in California and if someone wanted a repair done with rusty metal like that, the body shops would not accept it. The person would have to go to a restoration shop paying top dollar and even they would look for a better cab before they would attempt any repair.
I don't know if this is normal work in areas of the world that has rust issues but that was one hell of a repair. You basically took something that is not repairable, and turned it into something not only repairable, but repaired and it's not like it's a Rolls Royce or a Maserati, I mean it's a Datsun.
Thank you for this video!
Ed D
Everytime I think you showed us how to tackle a hard fix, you come up with something more amazing.
Fitzee, when I was in my 20s I'd be working on the vise with a ballpeen hammer and my amagination for my Gpa and I got 'er done...l would think to myself " man this is so cool !"... " this is like blacksmithing " I had thought, little did I know it was actually an art or lost art as some of the guys are commenting with the excellent work you do, now I'm by no means comparing myself to you because that it even close. You are amazing because of your years of experience in manipulating metal. But the point is anyone can use their imagination and get 'er done if they'd just try, the beauty of it all is that metal is is so workable and forgiving that a person can do anything with it if they would just try. And sir you make it easy to learn from. Who would have thought after all these years that I was actually working art in that little room out side of my Gpa's house and then years later come to realize that I mighty of been on to something great, I only just realized that tonight watching this video. Thank you so much for the inspiration, by the way...l am 56 years old now and that memory has always been there but you 'sir'
Continuing the comment; you sir are the Cat's meaw what a privilege to learn from you! Please keep the work coming its so worth it to us! Great job my man and Bravo for sure.
Thank you so much for kind words
I can't begin to tell you how appreciative I am of your videos. Your teaching ability and willingness to share what you know and take the time to record it for others I am sure has been as invaluable to others as it has been for me. Thanks so much.
Love your craftsmanship! Thank you for sharing!
Tony: "I hope the tips are good..."
Me: How am I not being charged tuition for this?!"
By far this is the metal repair content I've ever seen in my life! When people ask why I shipped both of my cars 2,300+ miles from SC to NL, I saw them video like this that Tony has put out. Absolutely amazing craftmanship with the simplest tools!
Shhhh nobody knows yet. Lol
Merlin of metal, the wizard or welding, the barb of the bend strikes again. Love watching you work these old cars.
Years ago, a friend built his own home. When asked how he did it, he said "One board at a time."
That's what you know how to do, Fitzee: One piece at at time. One bend at a time. One weld at a time.
Excellent!
Hi Fitzee ive been repairing rust in cars for 40 years and ive learnt so much from you, I had to repair the step in an old hyundai van and looning at the many curves and folds I thought this is beyond me. Then i saw this video and copied the methods and it was so easy , time consuming but i did a great repair to a complex area of 3 panels together but by cutting the whole rusted section out and making its component parts one by one i have saved an old van that panels cant be bought for. Thank you .
Fitzee you are fascinating to watch you work metal. You simplify it so that it looks so easy. But we all know that it is not. Every time I watch one of your videos I learn something. Please keep them coming.. I am not done learning.
Fitzy love your work love your accent and the way you talk. But hows crusty do'n
Nice work..I'm 70 now and have been doing rust repair for most of my life'. You are making part that I have trouble making with my E, Wheel and bead rollers, Good job and keep doing what you do. You from the bay bye, no from the peer dear.
More, why didn't I think of that? Love the punch marking the points for the bends, so as to have both sides marked. Thanks so much again for making it easier for us.
I was looking at another channel and I came across your channel. I have been trying to do the corner piece of my car for days and could not of figured out how to do it. but after watching you do it, it gave me the confidence. Thanks for taking the time to show us your talents. Grate video man.
Fitzee; I've enjoyed all your video's..Your editing is fantastic, almost seamless..like your welds. You cram so much content into each one. I also appreciate your music choices.
Amazing as always. I did my first cut and butt yesterday 🙂 I remembered to cut at an angle like you said. Very easy and turned out well. Very pleased.
Thanks Tony
Graham
This man is a Canadian national treasure. Thanks for the knowledge Fitzee.
Watched the video twice: each step makes sense but the end result looks like magic. Decades of experience makes it look so easy and effortless. Best video on metal work
This guy does fantastic work.Extremely knowledgable with a lifetime of experience. Great vid
After watching all the one hit wonders online, finally an old school master craftsman who is willing to share true wisdom.
Makes me proud to be a Newfoundlander😊
Tony that’s really just superb, very interesting one, what a challenge that presents. Thanks.
Hi Fitzee, you are a master. I work on my old rusty truck now and then, and I use every little tip from your show. Cheers all the way from Costa Rica. Keep up the good work!!
Holds up a partial rusty piece of metal ,,,,..I'm gonna use this as a guide / template and build a truck around it......LOL, no doubt about it brother, you do good tidy work, the thought process and plan of attack works very well for you. . 👍👍
Closest thing to factory as you are going to get.
Fitz is the Man . thanks for taking the time for Us to digest your Knowledge
Fitzee is definitely a 'metal man', give him an engine a gearbox, and a license plate, and he'll build the rest very well. Outstanding body work, strong frames and crossmembers, etc., but when he takes 3/4 of a rusted out fender, quarter panel, or pickup bed and cuts off the bad part and fabricates the rest of it a piece at a time to 'factory new' (or better) looking - blows me away, that is pure experienced skills, and know-how he's passing along to us all.
Always amazed by your patience while working around problems that arise. Thanks for sharing your experience and gifts!
Super job again . RUclips should give you a crown for your head All hail king fitzzy the king of RUclips teaches
I so love watching your videos so much hands on I really like how you explain step by step you give the average joe confidence to work on there cars
Thank you 🇦🇺
How did 1h 13 minutes literally feel like 10 minutes ?! I’m speechless mate ! The tips were more than good ! They were amazing !
As always very informative and no fuss
Your giving me motivation to get back into my 1977 mk2 escort. Thank you and we all love the long videos keep them coming stay safe mate
You’re good at what you do! You’re showing me how to look at mass produced vehicles with a different set of eyes. The dissections are amazing Fitzee
gotta love the CT Hat. a friend of mine owned one of the canadian tires in St John's up until a couple of years ago. I'm just about to tackle another funny rust area on my restoration project this video came just in time!
love watching you do your ''MAGIC'' you keep it simple and to the point. needs to be done in sections, one thing at a time . super helpful< use your tips on my 1940 dodge fargo extended cab resto ! BY far you are the best thing on youtube Knowledge and patience and no bull and pride in your amazing workmanship thanks FITZEE ps its 405 am where I am at lol
Been watching your videos for some time and this one inspired me to have a go at straightening out a crumpled lower section of a 1942 Nash fender, which I had previously considered hopeless.
Love your common sense, basic tools, "...don't be overwhelmed" approach. The fender section came out far better than I expected and I'm very pleased with the result. On future projects I'll be looking for my "inner Fitzee" as Matt The Scrap Whisper says. :)
Thanks Fitzee!
I was watching another channel today where the creator was repairing a rusted out diesel tank. He showed a patch panel he had fabricated and said: “I’m channeling my inner Fitzee”....
Watch Wes Work 🙂. One of my other favorites.
@@glanzaguy9187 Me too
@@glanzaguy9187 ⅚56iiii6665⁵5hý
I say a lot, that nothing worth a damn is given away free. But here, this information you’re sharing is worth it’s weight in gold. Fritz, your the man. Ty!
This goes beyond car restoration: It’s a forensic reconstruction effort!
I think you've just created a new autobody repair term. Welcome to Fitzee's forensic fabrication.
I am watching this out of necessity for a project. Fitzee makes excited to learn this trade. If he has a kid I hope and pray that they take advantage of the knowledge this man possesses.
Amazing fabrications skills there fitzee, you don't just do a cracking job you explain everything you do spot on too, I love your videos
simply wow sir amazing work and the end result is awesome and the best part was as you mentioned you did it with simple tools .... no bead roller or english wheel or pixie dust haha truly amazing craftmanship
Sir, it was such a pleasure to watch this video from the beginning till the end. I love the process and watching it done step by step makes it easier to learn more from it, I need to do a similar job in the near future and it helped me a lot. 🔧
Stick around? MOST CERTAINLY!! I am glad that I did- I've been instructed by one of the best YT gurus. Many thanks! I've learned A LOT!!
My father, Mel told me "God is in the details" as a lesson about doing things right the first time. I have learned that the devil is in those details as well. Nice job of it Fitz.
Most certainly a very professional and scientific approach!!! Your recognizing the need to maintain the location of that bottom right corner reflects a combination of observation and analysis skills and experience that is rare and a genuine pleasure to watch! Your accomplishment of this fine work with only tools available to the shade tree mechanic such as myself is an additional plus! Subscribed!
You should do a whole episode about different scenarios of metal rust-protection.
Please do!
Yes, controlling rust is more important now than ever. There are no more cars with chassis, so we must keep rust under control if we are to get up to 10 years out of our cars. My car was made out of Zinc coated metal and after 19 yrs, it has no rust!!
Amazing workmanship and very informative too. Thank you for taking the time to film and share this.
How can anyone put a dislike for this video, show us how you'd do it then ????
There's guys that have to make every complex curve from one piece hammering and shaping... Stupid
@@THIRSTYGUMS and there's also guys like Tony who help hobby DIY car owners do repairs STUPID 😂😂😂😂😂😂😂
@@simonwalters6733 Fitzee has a first name? My God................
@@simonwalters6733 you asked why someone would "dislike" his video - I'm telling you its because some guys are snobby metal working purists , they don't like piecework , everything has to be moulded and hammered into shape- THATS why they dislike' - and that's why I say "STUPID"- Check your comprehension
They are what are called "sociopaths". They get their jollies by finding a popular channel and immediately put a "thumbs down" on each new posting. They don't even bother watching the video.
Fitzee I like how you take your time and get it right.....better than NEW! no hack jobs!......
Theres a guy outta Chicago area that does the same thing with wrecked cars, even some that some other corner cutter has hacked!
better than new and safer as well that's a job well done!
I never throw any pieces away until I’m totally done. You never can remember what it looked like exactly!
You make me put my hands on my head and say "OH!, that's how I was supposed to do that!", like multiple times this video. Amazing work.
10:35 'deadly', my goodness, Newfoundland and Ireland are linguistically joined at the hip..
👍🇮🇪
@@edmondpower5722 Wonderful hybrid accent too..
Beautiful work again Fitzee! I just started a a frame off on my 57 Chevy truck last week, your videos are helping a ton! Regards, Doug
Dude! You got a big mention today from Watch Wes Work!
I heard about him from Homebuilt by Jeff in AUS. Then, more recently, from Rennch. I always think it's cool when people shout out other channels I watch!
Errybody loves fitzee
Really nice
Wow - so much learned in this video which I can apply to my restoration. I admire the way you can look at a complicated piece like this corner and make it into a great step by step tutorial. Thanks Fitzee. 👍
Nothing worse than finding brazing when you go to repair something. Makes life difficult trying to do the repair.
Not a big deal...there is worse.
Impressive work! You have special skills, with a methodical approach, one layer at a time.