Our Customer's Yanmar Kept Blowing Head Gaskets
HTML-код
- Опубликовано: 12 ноя 2022
- Want a sticker? jamsionline.com/jims-automoti...
A quick video on a three cylinder Yanmar that was brought to us after the customer kept experiencing head gasket failures...
Shop Engine Parts at www.jamsionline.com
Instagram: @jamsionline
Facebook: JAMSI Online
TikTok: @jamsionline
Website: www.jamsionline.com
Amazon Affiliate Page (Commissions Earned)
www.amazon.com/shop/jamsionline
Want to support our small business? Shop for engine parts, engine rebuild kits, and more on our website, eBay store, and Amazon store!
Website: www.jamsionline.com
eBay Store: www.ebay.com/str/jamsionline
Amazon Store: amzn.to/3swIJQG (Commission Paid Link) 
Авто/Мото
Thank you all for watching this quick video! 😊
I threw a few stickers up on the website! 😬 Check it out! jamsionline.com/jims-automotive-machine-shop-inc-jamsi-online-3-x-2-sticker/
New sticker looks good!
>
for a moment i thought why so fine tollerances in automotive maschining - then i remembered you use banana dimensions and 1/1000 for you is only a rough dimension of 0.0254mm
im working in QC - producing dosing and packaging equipment for medical and food industry as well as purpose built fine mechanics - with maschines like the newest DMG Mori and KERN-CNC
positional tollerances of 0.02mm and finer for holes and diameter tollerances of + - 0.0025mm Roughness RZ of 0.15µm (micrometer) on parts with up to 6tonns - ever had to let a work piece acclimatise back to exactly 20° between milling work steps to be within tollerance and needing to leave it in the maschine to not have a reset error? tension relieve glowing after rough milling
Hey Jim, just out of curiosity what are the materials that the seats are made out of?
I build street performance air cooled engine's and Stellite is what's used for our applications both intake and exhaust.
Would you do a little tecumseh h50
Outstanding boys.. thanks by the way for doing this.. at 70 now I had to give up my auto repair work ( personal not pro shop) 4 years ago. My body can't take it any more.. But my love of motors, which started when I was 12 years old rebuilding lawnmower engines through the 60's and 70's hot rod phase, up to just general restoration/repair help for friends and those that needed my help. I really enjoy seeing the old stuff happening still.. I miss it a lot and now can get a bit of a fix through you guys.. Carry on and thanks again..
Danm man,get back in it 70 is the new 30,just turned 70 and racing stand up jet skis......
@@zeke2566 Zeke, wish it was that easy.. But my body is now paying for my adventurous youth. The mind is willing but the body is done already.. But carry on brother.. it is good to hear some of us survived.. But not to many regrets.. I have a full, active and kick ass life..
Dad is 70, still rolling around under cars. He's got a mate who's 73 with hands so bad with arthritis its amazing he can feed himself, He rebuilt a grader last year. Get back at it, doesnt have to be cars or graders, motorcycles are excellent too
Well said.
@@Prebbets Thanks my friend.. I appreciate that.
Im a drag racing guy and wanted to say: Damn buddy your videos are excellent to watch..very informative!
Thank you!
Appreciate it! Glad you enjoyed 😁
Really like the hi-res camerawork in your uploads. Especially on the close-up shots. These type of videos look amazing in 4k
More crank grinding please. Always enjoy watching the "employee" run that machine.
Of all the people to grow up on the prairie, I think you are one of the luckiest ones. Outside looking in, you have a great dad who built a solid business. Credit to you for appreciating it and taking advantage of your situation! I live in cos and next time I need machine work I will be making the drive!
Your narrative during the work on the engines in the videos are priceless, I’ve been a jet mechanic trucks , dozers, and outboards mechanic for many years. I’m totally impressed ! ❤️👍
Fascinating. Even as a 30+ year tech/shop owner.
Love watching these videos
🙏🏻🇺🇸🙏🏻🇺🇸🙏🏻🇺🇸🙏🏻
Compliments from a non mechanic like me are undoubtedly unimpressive to a professional but I thoroughly enjoy your videos and will continue watching.
Very nice. It is a good thing to see how you work. Take as little as possible and not replace serviceable parts. If you were close you would get my 2000 Jeep 4.0 when I tear it down. Thank you.
A bit over 3 years ago I quit work, more repair than overhaul though I did some of that 20 years ago. I love this stuff still. Its always amazing to see true craftsmen (or women) do this. I appreciate the do what is needed as cost is a factor in many repairs and getting 85% does the job and is practical and I always practice Reality Based Maint!
Nice work! Those Yanmar engines are excellent. I’ve worked on hundreds of them in marine transport generators. I’ve seen them last 30,000 hours with oil changes every 250 hours.
Looks like a good motor, I just don't like the open deck design. Not much support for the cylinders. I'll take a perkins instead
Where are they made?
Never heard of them before.
@@Midnight_Rider96 the newer ones aren’t open deck.
@@dukecraig2402 Japan.
@@jeremykamel9655
Remember back in the day when stuff from Japan was junk?
Now it's the good stuff and all the junk comes from China.
Great video! I'm not a mechanic or racer but always heard the terms and explanations. It's great to see a video to actually see the process!
I love your videos. You and your parts washer do an excellent job. You're fortunate to have a great dad to learn the business from. And he's fortunate to have a wonderful son.
Great job, not only with the machining but the description, and not forgetting the right way to do the job, re cut check, cut, check etc
Nice job! You found his head gasket failure reasoning pretty quick. Looks beautiful. Thanks for sharing! 👍
I can't stop binging these videos. They're so satisfying
Donj't just bing them...bingeing them is so much better...
I love the process, but the explanation was the best part. Very well done sir.
gee as an apprentice I, in the 60,s did all that by hand except planing, honed with a drill, triggering the drill to spin slow, cutting the seats by hand reamers, and grinding with a suction cup and paste, good vid nice tools you have
Another interesting and satisfying video! You do a great job explaining and shooting your work, I daresay you'd make a fantastic teacher. Thank you for sharing your work, we appreciate it
I agree he is a fantastic teacher! He is teaching the world via RUclips. Now get your pencil out, pop quiz. 😊
These videos are intoxicating to me. Thank you.
I don’t know much about engines but from the videos I’ve watched about engines and valves my wife could not believe me when i told her about the tight tolerances on valves and pistons.
There is something interesting about the precision that goes into engines and this video beautifully demonstrates it.
Thank you.
I used a portable Sunnen hone, which you adjust at the stone holder and run in a SnapOn drill. I do aircraft jacks strapped to a table with a 1" DeWalt drill on a custom plate. I measure my barrel and then put vice grips for my start and stop and use a piece of hard 12mm plastic and bend it into my I-beam and cut new pistons on my Monarch lathe. I hate doing everything by hand, but it's always worked for me for aircraft tolerances! 👍
Nice job. Too many people who fix cars have no idea how much work is required to operate the boring machines.
Love the content. I work in a hyundai engine plant as maintenance. We machine 1200 rough casted cranks, blocks, and heads. To fully assembles running engines in 24hr. Its a lot of automation, but it's amazing how true your work is by self setups. I watch the gauges. Amazing work
the plant that had the recall from sloppy manufacturing?
@Brad Haines I can't discuss that recall. I know more than I'm supposed to. but I can say our tolerances are tighter than the big 3.
@@chrissmith2744 Fingers crossed as I got a remanufactured engine from that. Good to know that workers have faith in their work though.
Another good one and great breakdown on the issues and solutions. Way too much clearance to stop blowing HGs without resurfacing both like you did. Completely agree on the valve seats. They'll last more than past another rebuild if it ever needs it.
Great video. I was especially impressed by the 'softly, softly' approach to skimming the block. Whilst you touch on the subject of replacement versus renovation cost I would love to have some idea of job prices.
I used to work for a thermoking dealer. We had a lot of problems with these motors over heating and blowing head gaskets.Thermoking took yanmar to court but lost.They tried an updated head gasket and torque setting and some times this worked, however if the problem reoccurred a second time they replaced the motor. eventually they found that the water pump was the problem,it was causing hot spots at the back of the head. An updated water pump cured the problem.Side note, the engineer who sorted this problem had the same problem in boat engines in his previous job. Hope this is of help.
What year did Yanmar upgrade the water pump? I have one of these engines in a 2011 John Deere.
@@mro4440 I no longer work for the dealership but it was a few years back now. You should talk to the spares manager at a TK dealers, they should be able to help.The problem was always at the flywheel end of the head caused by hot spots , these motors ran at two speeds only high and low in this application [thermoking unit]
@@phil6506 Thanks Phil. I considered your point that the application the engine was operating in was contributing to the problem. Probably 🤞not an issue for the most part with an ag tractor.
One of the things I've noticed over decades and hundreds of engines. Is that some engines are more sensitive for the need for retorquing, after the installation of a new head gasket. Some engines you can get away with not retorquing. Others if you don't it's just a matter of time before they fail.
That was awesome bro I loved watching every bit of that and that's a nice little three cylinder engine
Man I thought this was going to be an update on the model a... but I still enjoyed it. Thanks
Gorgeous work
Truly fascinating. I always wondered how the piece to be machined is fixtured accurately
You’re shop is awesome!!👍👍
Excellent video, short and to the point.
Good calls and great work.
It's too bad that the majority of your work is not seen other than in videos, awesome work. The videography and voice over is great...Mike
I agree. I'd like to see more. If you visit the website you can see some of the items they offer. I would imagine, based upon their selection in their store, they do a lot of engine teardowns and scrapping.
@@amcargltd9784 00
Great video... fantastic information given to machine the block/head...👍👍
You are very informative and very enthusiastic thank you for the video
I absolutely love these videos. Keep up the good work.
It funny to see these old yanmar engines as i currently work at yanmar so i see the new engines every single day
Outstanding! Enjoy your approach to find a solution👍Wow! 😎
Excellent as usual...! Makes me want to join you!
Quality work as always
Great work man! I‘m just working on a Yanmar 3TNV82 and the engine needs a rebuild too. Unfortunately many operators don‘t clean out their radiators and these engines fail fairly quickly. Hopefully that engine will be up and running in no time! Keep it up😎👍🏽
Love the channel, just wished I was closer to have you guys do my machine work.
That was an excellent video as usual. Very informative.
block/etc all looks good real proffessional work!!!
Thank you! 😁
so satisfying, and nice to know the owner will get a reprieve from endless r and r's
Wow great video and explanation Sir. 👍👍👍
i wish you made longer videos they are very well done just wish you showed more machining and building.. your dad built a very nice business and its nice to see you learning and taking it up. oh sorry not your dad your parts washer!!!! LOL
Very Interesting.
Very informative. Especially the "not replacing everything despite rebuilding most of the engine".
I nuked the entire suspension and steering save the rack on a Toyota bought. In hindsight, the ball joints were still okay despite 145,568 miles on the clock. But the cost was about $24.00 each aftermarket circa 2018.
Great video as always!
so awesome. This kind of stuff interests me so much
Ah, another fix of JAMSI, brilliant!
3:02 I agree to this. It's harder than boring liners. It has multiple flaws, sometimes finishing stones are breaking, sometimes it's tight on the top but already loose on the middle.
Awesome work guys!
That coolant jacket looks like the Ecoboost Ford engine that has head gasket problems.
Thats one beauty engine now dude. I love it
I have installed these 3 cylinder Yanmar diesels in new off road vehicles and they start really easily, I can only say that to warp the block and head that bad was a loss of coolant unoticed, maybe the customer should have a temp alarm as it's cheaper than a rebuild...
Love the work been around machine shops for years Steve Ashworth
Like the video. Also liked that it didnt drag on for 20 minutes
Man this is so cool. I'd love to know more about these machines and what it takes to do this for a living.
Same minus the doing it for a living part.
Showing up on Time and everyday your supposed to work..and getting dirty and tired doing Man's Work is how you do it for a Living .. the machines are normal Machine Shop equipment that you apprentice or go to Trade School to use... this kind of work was normal decades ago when engines got rebuilt not " replaced " ...how old are you?
@@garymallard4699 32 but I've never worked in a machine shop before. I'm a draftsman but I still like to learn about other trades.
Nice work!
Awesome video great job
In the good 'ol days of Nascar, they would obtain a well used truck engine that had been well seasoned from the countless heat/cool cycles. The warped block would then be machined to a concentric tolerance for flatness where gaskets met and the crankshaft bores checked for uniformity.
Surprised that the crank bore trueness wasn't mentioned here.
This warpage of the block and head is described as core shift and is very common. Almost everything fuel driven is this way to some extent.
Thanks from all us couch captains
My oh my at that crank. Another enjoyable video... I bet your machine work is better than factory original.
As always, well done ✔️ 👍
Thanks for sharing 👍
Thanks for watching! 😊
Thank you for your knowledge and video's USA 🇺🇸
Great videos!
Would it be possible to do some videos of setting up the equipment? How do you make sure everything is mounted flat, the cylinder honing machine is center in the cylinder, etc
I know you measure everything but I'd love to see it.
As a carpenter I found this very interesting, thanks.
I really like the use of the Dykem Blue, for you not necessary, but for the viewing audience its fantastic.
its not as great as you'd think, you have to put a lot on or it'll rust under it
@@bradhaines3142 ummmmmmmm ok.
So talented!!
Very impressive
Well done
Great job. This video went by really quick thanks for the great content cheers from Canada 🍻
Awesome 😎 as always....
I'm retired as a farmer/truck driver. This type of workmanship has always fascinated me. I wish my hands and fingers had the same level of skills that my mind believes i have! I enjoy each of your videos.
Hey Just subscribed excellent video
Never seen such a thorough job on such a relative small engine.Usually patched up with silicon,thicker oils,etc .Must really be proud of yourself and your work.
Now for the thing,if i may ask: What is total cost?Engineering works,parts,labour.....?
That machine is going to run better than it ever has
Looks like a 3 Series Deere Engine . Nice job sir
Good video dude
Talking to my buddy who was pulling a head on a three cylinder air cooled drill motor, sitting on top of one of the pistons was the backbone of a single edge razor! Blade was ash.
Very bloody cool.
Un très beau exemple
Great work! the Yanmar now have 12 to 1 compression and put out 250 HP! chuckle
Better than new.
I have a three cylinder marine Yanmar. 27 years old, 4,000 hours, no problems. Didn’t realize it is an open deck design
Amazing results and knowledge
May i ask what brand are the new valves?
Also did you ever use Amc brand valves? Amc is a spanish company which sells heads ,valves etc
out of curiosity. When machining the head, why do you surface before you work on the valve seats? I remember in your model A video you were talking about the valve seat machine using the the valve guide as a reference, or do you tram in the deck on the machine first? Because if you surfaced the valve seats first all to consistent depth, then you could deck the head to ideal valve recession clearances. Or is my thinking completely wrong? Thanks for the videos, really interesting stuff.
Nice job.👍🏻👍🏻👍🏻
Want a set of Starret metric torque-release vernier calipers in METRIC? Only used lightly, original case etc? Think of all the conversions you'd save! Thanks for the good work and nice editing.
Phil 650
4 months ago
I used to work for a thermoking dealer. We had a lot of problems with these motors over heating and blowing head gaskets.Thermoking took yanmar to court but lost.They tried an updated head gasket and torque setting and some times this worked, however if the problem reoccurred a second time they replaced the motor. eventually they found that the water pump was the problem,it was causing hot spots at the back of the head. An updated water pump cured the problem.Side note, the engineer who sorted this problem had the same problem in boat engines in his previous job. Hope this is of help.
Good stuff!
good stuff.
one more thing ; with about .011" removed total , INJECTORS may nee shimming if direct injection . if indirectpower , precup , extra compression will be nice
I had to take my car in to be repaired years back as it was not running correctly. I left it with the mechanic and went off to do some chores. It must have been about two hours later I returned and was told that I had blown a seal. I was furious and told the mechanic that I would never have done such a thing to a poor defenceless animal.
I'll get my coat.