Hydraulic Press | Aluminium Foil | From Ball To Solid Piece
HTML-код
- Опубликовано: 5 фев 2025
- Pressing an entire roll (10m) of alu foil.
We made a big ball from the roll, and kept pressing it till it was a solid block of aluminium :) If we would have pressed further it only would break over and over again.
-------------------------------------------------------------------------------------------------------
Watch more of our videos : / presstube
Subscribe Here : www.youtube.com....
Our facebook page : / presschannel
Our Instagram : / presstube_yo. .
If you liked this video, please give it a thumbs-up ! :)
Equipment Used for filming our videos :
Gopro Hero4 Black Edition + Rode Stereo VideoMic Pro
Canon Eos 70D
Laptop : MSI GT72 6QD-678BE Dominator Pro
Slowmotion Camera IDT capable of 1350FPS at FullHD, 2000FPS at 720p and 60.000FPS at lowest resolutions | idteurope.eu/ (not used in videos before 6th of June 2016)
2x Manfrotto MT055XPRO3 Tripods
Contact my agent : savannah@ritualnetwork.com
Contact us directly : presstube@telenet.be
-------------------------------------------------------------------------------------------------------
Don't try this yourself ! Hydraulic Presses are very powerful and you can get harmed if you don't operate it correctly !
Enjoy !!
Outro Music By :
Country Cue 1 van Audionautix is gelicentieerd onder een Creative Commons
Attribution-licentie (creativecommon...)
Artiest: audionautix.com/
Man, this is a good press video. No clickbait, no intros or holdups. This is the epitome of quality content.
Tacticability I agree
Hands in the press in a big no no...
Use a plier
I was thinking the exact same thing.
ahhh yes the typical.. "I know what i am talking about with 0 hands on experience what so ever with presses but since watch videos and read Wikipedia I know every thing there is to know" There's nothing wrong with what he did at all.
***** Yes the blacksmith who has years of experience working with these kinds of machines and knows how they act and what they do is going to get his hand crushed like a buffoon...
+Samaia1992 because people NEVER have accidents at work with machinery right? Especially when they use them so often they become blasé to the dangers involved or get distracted by, oh I don't know, a camera they're also using to film their stupidity?
+Lammy Yup, it was moving soooo fast he just bearly got his hands outs of the way!
I guess, you could say this video was imPRESSive.
Here hold this W
+Darth Vader :D
Oh daddy,you so funny ♡.
Get out
Prassa is here!
hahahahhahahaa
Now try to unfold it
Kyle Rider never gonna work man
Wooosh
oof
Not gonna happen oh not gonna happen
TobbAnimations There's no woooosh here. Please stop.
"how can pressing foil be 5 minutes long" *watches intently the entire 5 minutes*
😂😂
Jonah Weakland done the same :-(
Damn they got me too lol
Same here. I checked the time of the vid a few times thinking "Omg, what else can happen here?"
Same buddy
Am I the only one that wants to see that get the sides grinded down nice and smooth?
Geniusboy 79 😂😂😂😂😂
Mystical Glow TV no
Mystical Glow TV no I was thinking the same
No you're not the only one I want so see if it would look like a silver plate
You replying to My Lord about his penis pumping looking like a silver plate? Oddly satisfying I'd say.
You should make it a bit bigger and make a bunch of them, then send them to Demolition Ranch to see how many it takes to stop a bullet.
That's a good idea
@@mindcap. Mr beast is a fake
MrBeast is trash
@@justinasmaciulis8524 yeet
Yes
My anxiety kicks in when he puts his hand in there while it’s still on
Agreed..
Yep
Me 2
Same
it's such a stupid thing to do.
A few more times it will make a black hole
Kidfury101 And whaaaaaaaaat
Aluminium isn't dense enough to collapse its mass onto itself, if you compress H20 a few times though. But I doubt that anyone or anything can even compress water.
Adriel Cedrick In theory anything can be a black hole.. Just have to make it "dense enough", by compressing it; working against some extreme forces..
Adriel Cedrick It's H2O and not H20. ;p
Occhublu Absolutely correct, it is called the objects Schwarzschild radius.
Straight to the point. Love it
has been done by the one and only original hydraulic press channel
+kirkb0t An entire roll, or just a sheet of foil ..... ??
Yours was better :)
How is there a one and only original of really anything?
You're the one and only original Villagers Odyssey
This one is waaaaay better....
When is less than 10 minutes you know is not going to be click bait
True 😂
Thanks for that
Ah yeah it is because you gonna pay for views and adds
@Hduf Lolly yeah really
@Hduf Lolly it seems like he didn't no that
Very original channel buddy
sarcasm everywhere? ...
Are hydraulic channels copyrighted now?
ItsMike naaah but i think people just want to see 2 videos a week instead of 20/week.... *sarcasm mode off* :)
I don't see you coming up with anything original
+T SexyRexy boi take a fucking joke
I've wanted this my entire life.
Idk Todd then you must have a sad life
GoldenShire That's ironic. It's always cool to think that you could make something decently strong out of a household good.
Who else was stressing out when his hand was in there holding the foil up!
InkBird Not me.
InkBird I thought he was actually overly cautious with how fast he pulled out his hand. The press isn't exactly slamming down
InkBird me
Me too.
I think more in his hand that paper foil.
Ezio Master Assassin!!!
The fact that the only point of me clicking this video was because I wanted to see the aluminum foil ball get crushed, and it was accomplished in the first 30 secs of the video, gets you a sub. Congrats
That man is disturbingly comfortable with sticking his hand into that thing...
Sean Martinson makes me think what other innocent hands he put in there
Sean Martinson that press should be foot pedal activated so the second he lets up pressure on the peddle it stops
Wtf...... Shut the fuck up
Spongebob Stuff delete your account
Uh, no
This is my 4th favourite hydraulic press channel
Thanks mate !! :)
Hahaha
+PressTube this is my favorite hydraulic press channel
+EveryThingOld 😂
Lol.
Turning Aluminum foil into Aluminum foil
It's actually turning foil to aluminium
Three Lui yeah so GuardianStudios is right, ur turning aliminum into much denser aluminum.
Ann Oynmous I know but turning aluminium foil into a peice of dense aluminium
Three Lui genius
Exactly
I'm really impressed at how strong the piece seems to get with each pressing. Cool.
Now turn it back into foil.
Ryan Cook howuh
XD
haha I don't know why but that sounded funny
play it backwards ;)
Ryan Cook it's still foil
You have very pretty hands!
+Chantal haha thanks !
:D
and thats how we met
hahhahaha
Chantal
But will it blend? That is the question.
せっかく最新技術で薄くしたのを敢えて分厚くしていくスタイル
But can you turn a iphone into an ipad?
Great question 🤔
best idea ever
+The Poking Guy ok...
That realy doesnt make sense. A press makes stuff smaller. So you could do it the other way around. I am 100% sure, you can press a ipad into a iphone.
David Schuster A press makes stuff wider not smaller
Hydraulic pressing a hydraulic press
If i am right There is already such a Video on youtube.
I beleive there is
I'm Orbzi GENIOUS
Johny TV i agree
I'm Orbzi YO DAWG I HEARD U LIEK HYDRAULIC PRESSES SO I PUT A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS IN A HYDRAULIC PRESS *JUST FOR YOU*
now send it to demolition ranch and have him test it to see if its bulletproof
I was literally thinking about that the entire video
It's aluminum, even 100kg solid bars of aluminum aren't bulletproof
it would still be fun to shoot!
XGamesGameplays demolition ranch is awesome, so is vet ranch
XGamesGameplays Spoiler ,it is not
FINALLY
A VIDEO THAT GETS STRAIGHT TO THE POINT!!
I suddenly understand how scrap aluminium can be used for power armour crafting in Fallout 4.
And why it breaks so easily.
lol
you win sir, you win
Haha, Mine just about broke today! Terrible stuff :P
was anyone else like "get your fucking hand out of there you idiot!"
I was like, keep your hand there and be brave!
I was scared for him , for a moment
I had the thought that'd he'd be more careful after he's crushed a finger or his hand.
Me
his hand wouldn't be crushed, otherwise it wouldn't of ended up on youtube
Finally someone has done this. Now I can sleep well.
“Honey I need a Hydraulic press machine”
“What for”
“For to press things”
Yeah dude others dream if luxury cars and 10 million dollars mansions, and i just want a hydraulic press machine :(
and now. hydraulic press a hydraulic press!
Wow finally i got it
Hydraulic Press Channel did that
Press a 1000 DEGREE HOT *FIDGET SPINNER*
hold my beer
Hydrauliception
Out of interest, what is the less fun use of this kind of press? Could you give an example of what industrial application you would use this press for?
+Kevin ‘Dark Realist’ De Vos Blacksmith ;)
are you dutch?
want ik ook
--"Could you give an example of what industrial application you would use
this press for?"
In addition to what "idii ace" mentioned, hydraulic presses are also commonly used for pressing bushings, bearings and other parts into metal bosses or housings for a tight "press fit" or "interference fit". While metal parts are often attached to each other by welding or by screws and bolts, it is also common to press a cylindrical part into a tube-shaped hole that is actually slightly _smaller_ than the part. This is called an "interference fit", and as you might expect, it requires a tremendous amount of force. Once the cylindrical part is forced into the hole, it is permanently installed and can't be removed. (If you need to remove it for whatever reason, you have to drill it out.)
Captain Quirk Thanks for the thorough explanation, I appreciate it Captain ;)
1000 times folded glorious nippon aluminium!
That may be the most satisfying video I have ever watched in my life. That’s the kind of stuff I do
did you ever try to break the world record of folding a piece of paper in half with this press?
exactly what I was thinking
mike jakob Hydraulic press channel. Duh
also please press a load of gummy bears.
yummy!
Already done by the HPC
+Casey Small , so what?
So if you press normal paper like that you'll end up with a tree!
Hahahahahahaa 😂😂😂👏👏👏
0WN3RBogbat more or Iess, yes
Yus!
0WN3RBogbat 😂😂😂😂🤣🤣🤣🤣😂😂
no because it's still paper, it has no color and can't be turned back into a log
How to fold paper more than 8 times...
Proof or u gtfo
False
@@BreadCrumbsOG you can actualy fold a piece of paper 13 time.It's in the word record book
XXXTENTACION
@@myst1k838 world*
And that's how they make iphone casings.
or maybe it's just the truth
yup,except tissue paper
Hahaha
Lol
Nah by casting that takes to long and different aluminum
few more times and it's so dense that it creates a black hole
lol
Hah...
+The Anonymous hello brother
+Anonymouse youtuber Hello my brother.
I'm pretty sure it'd only become as dense as aluminium.
couldn't you fold a piece of paper more then eight times with that?
it probably would explode.
Poli-Blog Channels the universe would implode, don't do it
You need a paper the size of the universe to fold over 8 times if you have nearly infinite energy.
Birki gts watch myth busters
They didn't fold in half every time in both direction, they folded it in half in only one direction.
My wife just asked me "Why do you watch this stuff?"
and I had no answer for her
make that into hats, the aliens will be no match for us.
@3:22 kid or young technician for God sake , never do this!!!
blooshedable
Why not? You can easily stop the press/turn it off
Pizza Sub Better safe than sorry, I suppose
i have quite a mangled arm from a machine with a huge stop bar....hitting the stop bar oddly is the last thing on your mind when a machine as smashing you up
blooshedable couldn't agree more
blooshedable its good
Is this how Ford makes their new f-150s?
This should be top comment
Rick Sanchez agreed 💀💀💀
Rick Sanchez Agreed
Should be top comment
Sure is buddy
Once again the RUclips recommended section brings us all together
so is this how the f150 is made
You must be a chevy guy hahah
savage!
If that is how the F150 is made I would love to see a Chevy get made
+SergioRC The Gamer sounds about right
lmao
Nothing like crushing an aluminum ball at 1:30AM
Hydraulic press a hydraulic press pressing a hydraulic press
Too much hydraulic pressing. Might form a black hole or a ripple in the space-time continuum.
I think there is a video about this.
This not mr beast
Pressing a hydrologic press
Hydraulic Press Channel did this!
Why am I watching this?? And also I watched the whole thing!
that aluminium foil reminded me of school recess
Mohit Saxena I have no idea why but it reminded me of school and recess too. Confused me!! Haha
The slide, same metal pattern
suddenly I felt so much pain when he put his hand under it
Larry The Lobster lol me too I was like "you uuuuuuuuu idiotic man"
Larry The Lobster hi
Sooo, you're not supposed to do that?
I'm amazed he didn't use tongs for that, he's clearly got access to blacksmith's tools.
It's not a solid piece. It's highly compressed but you would have melt it and create an ingot for it to be a solid piece.
Aluminum isn't that hard and it's very malleable, so it's possible that it isn't that far from being solid
Jota C Yes but the heat caused by friction of folding and pressing is not enough to fuse the aluminum laminations unless you press with hundreds of thousands of PSI. He is able to touch it with bare hands.
Cody Cigar as I said, aluminum is not the hardest metal out there, even in foil form it still has metallic bonds, even by folding with hard enough with your hands you make new bonds, that's why sometimes you can't unfold it back, with hydraulic press I'm pretty sure it creates strong bonds and its just a bit away from being solid because there may be a few molecules of air in there
Jota C the layer of aluminum oxide (created naturally when aluminum touches air) stops that from happening. No amount of pressing will change that, unless the oxide layer (and the foil itself) were to tear. Even still, it oxidizes quite quickly.
Ron E fun fact, it's all one piece of aluminium therefore it is solid 👌
Mad Respect for this guy jumping right into what he was advertising
That was a great video. Thanks for folding it with a hammer and pressing it again!
Why am I watching this at 12:21 at night...... lol
Aye
lol
because you gay
+mukke saar hey hey no need for that buddy.
why am I watching it at 2:35 am..?
Why do I all of a sudden want to eat aluminum foil
Lilli the greatest 22 same like wtf
Lilli the greatest 22 it's so satisfying to chew
A swede will eat aluminium foil cuz he's swede
chewing on aluminium foil is incredibly bad for your teeth and will destroy the enamel
Brhim I'll keep that in mind
THIS is why I need a hydraulic press for Christmas
why am I watching this? I have 3 tests tomorrow smh
Alfredo Mendoza - Same lol
Alfredo Mendoza I already watched it and I'm just reading the comments and I have a test in 13 hours :( What am I doing with my life
Alfredo Mendoza same
Because this is going to help you understand the nature of the universe and existence a hell of a lot better than any dumb test, and part of you knows it.
Nice even number of likes,
It would be a shame,
If someone made it odd
Never, ever stick your hand in the press area! I ran a press brake for over 20 years. Lockout/Tagout!
I agree! use a set of tongs if you need to stand it
Never really used a press before but I sort of cringed every time he had his hand in there. Some may argue that they know what they're doing and all of that but it only takes that one time for something to go wrong. They say that most accidents are preventable and I believe them!
That freaked me out when he kept his hand in. At least use tongs, although "Hydraulic Press | Human Hand" would probably get a ton of views.
Someone was split in half by a baler in a building next to my old place of employment.
I've never used nor been taught how to use a press, but that bothered the hell out of me. It was obviously a bad idea.
don't know why but this is so satisfying to watch
Right! * lol
This is a video I will see straight to the point no ads and no intro thank you
Try a Nokia phone. It'll definitely destroy the presser.
he should use nokia phone as presser
make job easier.. lol
aminluqman hakim LMFAO
Someone please take this comment seriously
@@LuqmanMal underrated comment
TOM i would be afraid to ruin my press, that’s a cursed phone.
Please don't take this the wrong way (after all, I LOVE your videos), but when I saw you with your hand in the press as the piston was going down, I almost screamed, "WHAT THE F*** ARE YOU DOING!?!?!?!"
oh yeah he better watch out because it takes 10 seconds to go all the way down, which isnt enough to take his hand out, yup
OMFG AFTER I SAW THAT I LOOKED BACK IM LIKE OH SHIT YEA
Chris Bartha Okay, you didn't see anything wrong with what he did. I've cleaned up after more than one industrial accident. It ain't pretty...
You know it sped up and this thing takes for EVER to go down its like 3x Speed xD
Viadus Oh, I understand that it's probably not as dangerous as I seem to think it is, but given that there's the distraction of making sure the camera is working, the lighting is good, and what-not, there is a risk of injury.
With this type of gear, injuries are rarely minor ones, and like I said, I have had to clean up after industrial accidents...
Thumbs up if you're watching this nonsense instead of sleeping ....
lol
Holy shit how did you know?
Too relevant
MEH
Yes.... Haha
I have ADHD.. Straight to the point and no talking... Thank you
Can you fold a sheet of paper more than 7 times with a hydrolic press?
That mine other hydraulic press channel thing did it
yap
No, it some kind of exploded.
The paper became wood
/watch?v=KuG_CeEZV6w
that thing is tougher than the new Ford body!
FatGuyWithaBeard lol
FatGuyWithaBeard thats liek an over 9 thusan cheeeeen
Can you please try to press a piece of paper? a normal sheet? to bust the folding a sheet 7 times myth
sorry but it's already been busted by some chinese guy that was bored in school
A Wild Mew xD
Alejandrobb99 the myth busters did that already
hydrauluc press channel also did it
myth busters did it
Why is this so satisfying to watch????
You will never be as popular as The Hydraulic Press channel unless you get a girl to laugh in your background as you say "Vat the fack"
+mrifeelstupid 12542 time is read this today. Did I ever said I want to be as popular as them? No I didn't ..... Have a nice day ;)
That's makes me so pissed when someone puts someone else down like where tf is your channel😡 mr you are stupid!!!!
It's not really that serious, it was only a joke. Calm down.
+PressTube I think they were more making a joke at the expense of the other channel rather than yours. It seems like they enjoy your content more.
+PressTube of course you would like to be, who are you kidding lol?
Please will you do my Xbox One Rock?
+FastEasyLifeTips Where are you from? If you send it, we'll press it ;)
Great thanks mate, I'm in Scotland. How about you?
+FastEasyLifeTips they're in Belgium lol
I will wait for this one!
+FastEasyLifeTips email them directly for where they're located. You tubers Never disclose where they're located. Seems they're in the US of A.
It seems my plan was foiled.
no
Yas
stop
Amy Loza never
Heliuz You may try to CRUMPLE or CRUSH me but it will not work
This is the most oddly satisfying video I’ve seen on RUclips in a while...👍🏻
The T-1000 had tears in his eyes watching this ;-)
T800 I think you meant
Press coins
+1
+2
+👍🏿
+3
+600
omg that noise... so satisfaying!
yes men
+Carmine TheBest hhhhhjahahahahahahahhahaha
Yes exactly
imagine bubble wrap and this together pop and crumble
How youtube silver play button were made
😂😂
Why im watching this in 3 am in the morning..
Jordan Greek how did you know? :O
Might be because there's no 3am in the evening?
I'm guilty lol
As opposed to 3 am in the afternoon?
Jordan Greek Because you can.
Here's a good one to press: A 6-pack, 12-pack, whatever-pack of shaken up soda.
Unless that's already been done. In which case, someone link it to me.
good idea
He has done the beer but not sure about the soda
he did it :D
ruclips.net/video/IXNp8aS65z0/видео.html
:D
Put a hydraulic press inside a hydraulic press
you can't the world would implode
search for pressseption
+Malarkey 1195 not possible the earth is obviously flat
Robert de Tatta ah a fellow scholar. You are correct do you think that it would just fold together like paper?
Granny Torrelli but explain night time.
Man, this video was solid
It was a solid piece the whole time. Now it’s just flat.
Mike Litorus Like earth
@@Lunko. lol naw man
Not sure you know what solid means...
@@Khepriem dude, it's either solid liquid or gas, was it liquid or gas? No. It was a thin layer of solid foil, you can bend a solid, so don't go telling people they don't know what solid is when you don't even know yourself
Taron Smith Literally the first thing that pops up when you look up solid definition.
Solid / sol-id
1. firm and stable in shape; not liquid or fluid.
"the stream was frozen solid"
synonyms: hard, rock-hard, rigid, firm, solidified, set, frozen, concrete
"the ice cream was solid"
2.
not hollow or containing spaces or gaps.
"a sculpture made out of solid rock"
So I ask you, was that ball of aluminum firm and stable in shape? Was it hard, rock-hard, rigid, firm, solidified, set, frozen, or concrete? Did it not contain spaces or gaps?
For fucks sake people, you have access to all knowledge, why do you not use it before being so sure of yourselves as to correct someone? All it would have taken is looking up "Solid" and "definition"!
"It's either solid liquid or gas" You're referring to the absolute five phases of matter, but you only said three. There are five known phases, or states, of matter: solids, liquids, gases, plasma and Bose-Einstein condensates. The main difference in the structures of each state is in the densities of the particles.
SOLID
In a solid, particles are packed tightly together so they are unable to move about very much. Particles of a solid have very low kinetic energy. The electrons of each atom are in motion, so the atoms have a small vibration, but they are fixed in their position. *Solids have a definite shape*. They do not conform to the shape of the container in which they are placed. They also have a definite volume. The particles of a solid are **_already so tightly packed together_** *that increasing pressure will not compress the solid to a smaller volume.*
So if your ignoring all other ways people determine if something is solid (like the ones I've stated above) and only going with the solid-phase definition, you'd still be wrong.
But at least we've learned something here. You DEFINITELY didn't know what a solid is, but maybe you do now. Don't feel too bad, some people believe the earth is flat.
That is now going to become a fender for the new f150
+ProgramThat LMAO 😂😂😂
"Today on How It's Made..."
lol ford sucks
I feel like I'm cheating on HPC for enjoying this
+Dion Lewis sshhhttttt I will not tell them ;)
+PressTube why is the dial in water? Or a liquid
The primary reason for gauge failure is vibration. In traditional dry gauges, delicate links, pivots, and pinions are prone to damage from vibration, leading to inconsistent performance. In a liquid-filled gauge, the fluid fill effectively dampens system pulsation, making the gauge pointer easier to read.
Likewise, humidity and moisture pose problems for dry gauges. Condensation can make a gauge difficult to read or, in some cases, can cause failure due to icing. Liquid-filled gauges, though, are sealed to prevent internal condensation, and by keeping moisture out of the system, gauge movement is protected during icing conditions.
The choice of fill fluid is based on the application, but glycerin is typically used for room-temperature applications and silicone oil is commonly used for extreme temperature applications, especially when icing is a problem. An oil with insulating properties is ideal if the system has exposed electrical contacts.
+Rock 'n Roll Daddio Ah I see, cheers mate I appreciate it
Does your daily job involve you using the press? Or do you just have it as a tool at home? I'd really like to see one of these be used for what they are intended for
Still one of my fav vids
what is a hydraulic press ACUALLY used for ?
Pressing
Fredo Now that I wanna see
putting bearings in place.
Forging
+ItzSpicy I saw a vid where someone did that, pressed all the juice out of it.
Thumbs up if you don't know why you're watching this... 😀
Mark Allen no just here for the comments
👍
Mark Allen this is illuminati
try taking a piece of paper fold it in half perfect press it fold it in half perfect a gain press it as many times as possible
+Christopher Melvin We did it! ;) The video still needs processing
the paper explodes
Christopher Melvin
Christopher Melvin wtf why would you press it after the first time
14 million views for 70 cents in aluminum foil. This is the greatest investment advice channel on the internet!
dont put your hand inside that. -.-
Monika Ciegowski really? I was about to...
There goes my plans for the day...
Taco Tacotington 😂😂😂
Yea it kind of drove me nuts that he had his hand in there when it was moving
@@tacotacotington3638 hard on vs hydraulic press.
when mom said get one aluminium cutting board !!! 😂😂😂
I feel like I could make handmade tortillas on that way easier
Nicktheclipper - Saara lyrics
Alex you’ve never made homemade tortillas have you?
So that’s how they make my schools toilet paper! I never knew you knew. Thanks for the knowledge.
Presstube, are u from the netherlands?
+Matthy Gaming Belgium ;^
PressTube press tube your n ver cease to make me happy ur videos are awesomeness keep up the good work:)
+PressTube vlaams if Frans?
Đese graffiti Vlaams :) Antwerpen ;)
PressTube ok
Damascus Aluminum. lol
LEL
KEK
damemescus
umm that's how they get tin foil in the first place a solid block is rolled under rollers till the desired width
UpsetSpy we call it tin foil in Canada
tin sometimes refers to a thin sheet of metal, like a tin roof is not made of tin
The name Tin Foil came from years ago when they truly did make it out of true Tin. Then the iindustries started to uncover more and more aluminum thus making it cheaper than tin and that's why some people still call it that. Although nowadays it's supposed to be aluminum foil, tin foil is just easier and faster to say, that's probably why it stuck around :P
We have a 200 ton press at work. The management allowed me to place my own aluminum recycle bins all around to collect all the cans. 50 people can generate a shit ton of cans. Once a week I take them all and compact them into a solid block. I take all the blocks once a month to the scrap yard and earn about a dollar for every two pounds. I am averaging 70 lbs a month so I get about $30. It's not much money, but it's something.