Woodworking: Break-Down and Prep the Wood Like a Pro
HTML-код
- Опубликовано: 5 сен 2024
- Building woodworking projects requires understanding of how to break-down and prepare the wood, another form of "good woodworking practices"; Most wood we purchase at lumbers stores, even wood that is is kiln dried, is often only partially dried, a moisture meter will confirm this quickly; cleaning the wood before jointing and planing is crucial to keep blades sharp and not pitted and for discovering embedded metal in wood like the lead I discovered deep inside this board; Warped, twisted and bent wood needs special attention in order to get the most from your purchases and to work safely on your table saw, bandsaw and other woodworking tools, all of which makes wood preparation an important first step to making woodworking fun.
Read Full Article Here - bit.ly/3YQuY0I
*** Taylor Tools Affiliate Store - lddy.no/18zkg
*** Amazon Affiliate Store - www.amazon.com...
*** Magswitch Affiliate Store - mag-tools.com/...
*** Canadian Amazon Affiliate Store - bit.ly/3CiAFKi
*** T-SHIRTS and Fun Stuff - teespring.com/...
**** Subscribe here - / knecht105
** Like me at Facebook: goo.gl/DLgvoa
** Visit the website: www.woodworkweb...
** Follow on Instagram - / colinknecht
** Follow on Twitter: / woodworkweb
When I cut that mitre in the wrong direction on my last piece of walnut, I definitely knew what it was like to break down like a pro
LOL ... I agree :)
Colin, the forensic arborist! Outstanding video. I have a stack of pecan drying in my shed and I know where it came from since I helped harvest it. I know there's no nails in it, never thought about a bullet.
This was a first for me, but I have heard of other finding bullets, more common that we might think
Kudos for you for not going the clickbait route in your title. I can imagine a lot of other YTers with a caption along the lines of “Amazing Surprise When I Cut Open this Wood”
Thanks for the feedback
The only thing I'm a pro at is crastination but it gives me a sense of validation when I see a pro doing things that I have developed a habit of doing, e.g. removing the warped section rather than trying to plane, and cleaning the minute particles that more than likely contain rock.
You are also a pro with words, very decorous description
Thanks a bunch for all the tips, Colin! 😊
Stay safe there with your family! 🖖😊
My pleasure!
Looked bigger than a 22. Also, faulty way to age when the bullet got into the wood. The tree could have been shot later and the bullet would penetrate to that tree ring. Really like your videos.
Not saying you're wrong because I surely don't know but, I think the way the anomaly developed is how the time period could be determined.
CSI Collin.
LOL ... I wish :)
Always giving us top tips Colin, thanks👍👍👍👍👍👍👍👍👍👍👍👍🤣🤣🤣🤣🤣
Thanks Alan
Thanks 👍 Collin. I always enjoy your videos. 😊😊
Glad you like them!
Great informative content. Thanks for sharing. I’d be interested in an air monitor review for woodworking from inexpensive to best quality.
I have thought about that, but keep shying away as I don't feel qualified to give the best results, but I will re-think ... thanks buddy
Very Nicely Done!!
Thanks for the visit
Very informative.
Thanks for commenting
You left us hanging Colin with an incomplete story. I want to know how much you paid for the board - if you got a good deal at least.
Otherwise good tips and interesting forensics. I'm wondering if you could just leave the bullet in. I wouldn't think it would harm your tools and it adds an interesting story to the piece you make.
Oh goodness, I think there were only 3 or 4 boards I bought from him over 10 years ago and they have been sitting in my shop ever since, I could only guess at the cost. I was really more to help him out. About the bullet, lead is pretty soft and to be honest I am not sure what it would do so some blades, steel blades would be less harmed, but any blade or knife with carbide teeth, they stay sharp a long time but carbide is a very brittle so not sure it might have done to blades like that.
I hate to say this but if, and it sure looks like it, it's lead, you could have left it in. Wouldn't hurt the blade and the removal caused some serious damage.
I didn't realize it was lead until I started removing it, you are correct, (I think) the lead probably would not have damaged saw blade, but my planer and jointer have carbide (which is very brittle) helical head teeth and with them if one tooth chips or breaks it can cause a cascading effect on the following teeth so, not only does the one tooth get destroyed, but following teeth can also break because now they are chewing up bits of broken carbide along with the wood, and sometimes following adjacent teeth can also be affected, so in the end, I am not sorry I dug it out.
@@knecht105 Excellent thinking. Better to be safe. I don't have such tools to know about them. Thank you for the knowledge.
Wouldn't it be better to check for metal before sawing. Not only could an iron object damage your sawblade, but if the object is somewhere in the middle and you have to remove it after sawing, you might ruin your workpiece.
Yup, best to check that wood first
Wath kind jointer you have, and merci pour votre post
Its called a Rikon, and is a 10 inch helical head
Great job Carl
Thanks Michael
Colin has some bada$$ wood! ... Umm, what?
I bet it was an old .32 or .38 caliber since it goes back that many years.
It could have been ...
Well, that piece of wood is shot. Heh.
LOL ... good one !
Leave it in
I thought about that after .. I not a quick a thinker as you are :)
Mucho manoteo y poca accion
Thanks for commenting