How To: Whirlpool/KitchenAid/Maytag Water Inlet Valve 285805
HTML-код
- Опубликовано: 8 сен 2024
- How To Replace: Whirlpool/KitchenAid/Maytag Water Inlet Valve 285805 www.appliancepa...
Symptoms: Washer doesn't fill or takes too long to fill with water.
Tools: Flat head screwdriver, Phillips screwdriver, 1/4" nut driver or socket, pliers or channel locks.
This Whirlpool/KitchenAid/Maytag made Washer Water Inlet Valve replaces the following older part numbers on Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, Sears, and Kenmore Washers: 21026, 285805VP, 292197, 3349451, 3354565, 3360387, 3360388, 3360389, 3360391, 3360392, 3429537, 358992, 370067, 388328, 3952163, 3952164, 3955673, 8228, 868761, 99989697, W10110517.
Buy the new Washer Water Inlet Valve 285805 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros
These guys are honest people. I called them and ask to buy a part, water inlet valve.
And before the nice lady , Joyce, would sell me the part she told me to check the valve first and gave me sound advice. It worked and I didn't need the part after all. Saved me almost a hundred bucks...
Thank you.
You're welcome! We think it's more important to build long term relationships with customers who know they can trust us than to make a quick buck in the short term. Next time you have any appliance repair needs, we'll be there!
I'm a complete two left thumbed tool when it comes to tools but I was able to repair my washing machine because of this video. Much thanks. Total cost $26 and about three hours of time.
I just replaced the washer water inlet valve. I had trouble and found this video. It told me exactly how to do it. It was easy, if you can change a light bulb you can get your washer repaired if you follow this video. Pay particular attention to using a putty knife to remove the top a screwdriver will not work. Also make sure to mark the hot, cold and any electrical connectors before removing them.
Great video. This is the first time I have repaired an appliance. Thanks!!
Thanks so much for your great instruction. We fixed the washer and it works great!!! You'll have saved us a lot of money. Wonderful job!
Thanks for your help in this video. I repair myself my washer following your explanation.
Glad the video helped you get the washer fixed!
Outstanding vid! Perfect explanation and highly professional production qualities.
Thanks, glad the video helped you get the washer fixed!
Sounds like maybe the water level switch contacts could be sticking together. The motor and the water fill valve should not get power at the same time. The tub should fill, then the power is sent to the motor. It could also be in the timer. If you need more help troubleshooting this you can post your question in our repair forum and the techs will help you out.
You guys are awesome and great instructors!
thank you i was listing to my idiot boy friend and he claimed he knew what he was doing and water was everywhere so glad i looked this up ill do it my self... now to the dreadful LG dryer that keeps popping the breaker and takes for ever to dry and sometimes wont work ugh
Make sure you check the hoses and screens first, to be sure they are not clogged. You will probably have to take the front panel off and then remove the washer top. Its not hard but is more than I can explain here. Please post your question on our repair forum and the techs will help you out.
Good job on the washer! If the dryer is electric I would start with the element. Make sure you have the power off while testing!! It should have continuity.
You will also have to inspect the hose that goes from the switch to the tub. Look for any cracks or holes. If there is any damage or leaks it will not allow proper pressure up to the switch. Also make sure the air dome where the lower hose attaches is clean and free of damage, leaks. When the tub starts to over fill, not to the point of overflowing, unplug the washer, if the water still comes in it could be the water valve is getting stuck in the open position.
Awesome video! I got this !
Buenas tardes es para mi un gusto saludarlos siempre felicitarlos por ser tan tan profecinales en tan prestigiosa empresa por impartir i publicar los videos que para mi es u material valiosicimo porque se me a echo fácil mi trabajo los felicito y qué sigan sdelante
Gracias por tus comentarios. Estamos felices de haberle ayudado.
A very, VERY, excellent video. Thanks so much!!
Cameron Towner Glad the video helped you get the washer up and running!
This is great! We have a LSR7233EQ0 that recently - and only sometimes - won't fill on rinse. However, the agitator will still kick in at some point while on rinse. So at first I thought to replace these inlet valves, but I'm wondering if this might also have something to do with the water-level pressure switch/system? I'm seeing how that system works with the hose that needs integrity, etc, and wondering if that could also cause the lack of filling? Thanks!
Thanks! This was a huge help and success. Great Video
Awesome, glad you got the valve in!
Awesome video. Thank you for the help.
Thanks guys! Easy fix.
Thank you so much. Great job.
Don Budzinski Glad the video helped you get the washer fixed!
thanks a lot!, this video really helped!
awesome video, thank you!
Glad the video helped you get the washer fixed!
If it agitates with no water it could be the water level switch is stuck in the full position. Which means the washer thinks its full so it starts to agitate. Check the pressure tube for any damage or obstructions, if its all good then check out the switch itself.
How much does one of those cost water fill valve
How much does the water valve cost
water would continue to fill maytag washing machine drum to the point of over flowing, replaced the water limit switch but didn't fix problem
My 1994 Maytag clothes washer will spin but not start running water into the tub. I replaced the timer, but still only spins? Any suggestions. Thanks
Great video, I thought the issue that I had was the inlet valve at first. But now I'm starting to think I was totally wrong, because the washer will start to fill and the cold water will continue to fill regardless of the level. It will start to agitate will start running and the cold water will continue to keep running all over the flooding the floor. Then it will get stuck in a cycle and not run at all. Do you have any advice for me at all please! Thank you! Don Kain.
DON KAIN A washer that over fills usually point to a bad water level switch. Either the switch has failed or a hole in the pressure line.
The cold water on our washing machine is working but only comes out a little. Do you think this is the valve or the screen?
Oh my god thank you.
Justus Patrick Glad the video helped you get the washer fixed!
What do I do if the wiring harness connectors are stuck?
I suspect my valve has failed. No cold water going into machine. It's a stackable washer/dryer. How do I get at the inlet valve? Please don't tell me I have to take off the dryer. It's an Electrolux MEX731CAS3. Thank you
My washing machine just left the building... and it has my comforter, how do I get it so come back??
Are there anymore videos on how to remove the panel from the machine? I'm using a Toshiba AW-SD160S, I've removed 2 of the screws (visible from the outside) but can't seem to remove the panel.
We do not have any information on Toshiba washers at this time.
Does the water inlet valve affect the water level switch and water temperature switch?.........many thanks!
They all work together to fill the tub. When you start the cycle the water temperature switch tells the water valve which solenoids to open for the correct the water temperature. When the tub is empty power goes to the water valve until it fills up the tub. Once the tub is full the water valve shuts off and it starts to wash.
AppliancePartsPros Great info and videos, thank you !
How does it know when to shut off for a small load or a medium load?
It uses air pressure. The clear tubing that goes down to the bottom of the tub, as the tub fills with water air pressure goes up it to the switch. Once it gets to the correct level the contacts inside the switch open and shut the water off.
You are welcome!
I have a Whirlpool LSR8010PQ2 ... I set it to cold/cold, it runs cold water...but, then on the rinse it comes out hot, just started doing this recently.
Would the problem be the "temperature control switch" or the "Inlet Valve"?
We'd be happy to help you out with that! We offer free technical advice and diagnosis. You can give us a call at 1-877-477-7278 or you can chat us at our website: www.appliancepartspros.com/. We will need your model number to give you accurate advice, which you can locate using this tool on our website: www.appliancepartspros.com/modelnumber_locator.aspx
Thank You!
now one for small spaces where its tight to manuever
Our videos are just generic videos to give you an idea on how to replace the parts. If you are unable to access the part, you may need to uninstall the appliance to do the repair.
tengo una lavadora whirlpool que ase todo los siclos pero el esprin no lo acciona y termina como si lo ubiera accionado que estara pasando gracias buen dia
Necesitaremos su número de modelo para ayudar. Puede buscar aquí en nuestro sitio web para ayudarle a encontrar el número de modelo: www.appliancepartspros.com/modelnumber_locator.aspx
Entonces usted puede darnos una llamada en 1-877-477-7278 o usted puede charlar nosotros en nuestro sitio web: www.appliancepartspros.com/.
where did you get the parts???
my whirlpool duet sport wont allow water to enter, it went successfully through half a cycle then stopped. I was able to set it to drain and spin, but now when i set it to start a new load, it just grrrrrrrrs when it should start filling. I did have an error code of f1, which i believes indicates a short on the board. Is this generally fixable by soldering? I repaired the dryer board this way.
Samanda Most people just replace the board, if its bad. If you are trained in board repair/electronics you might want to do it, but in general they are just replaced.
What if the machine starts to agitate and the water continues to go into the machine?
I have had the part for several months but it looked like such a pain when I found out I had to pull the front of the washer off. IT WAS SO NOT HARD!!!! Women get your tools and fix the washer.
mine has 2 wires that plug to the water outlet hose
There are a few different versions of water inlet valves, you may have to take the extra wires into account!
si el problema es que el reisar porqué no activa me encontré Qué el motor tiene un problema en la velocidad por un platino que no despega le mando una fotografía
Necesitaremos su número de modelo para ayudar. Puede buscar aquí en nuestro sitio web para ayudarle a encontrar el número de modelo: www.appliancepartspros.com/modelnumber_locator.aspx
Entonces usted puede darnos una llamada en 1-877-477-7278 o usted puede charlar nosotros en nuestro sitio web: www.appliancepartspros.com/.
tengo labadora
¿Su lavadora está funcionando?