I've watched every video on RUclips about this so far. A bunch of "Turn it left 80 times, right 40 times, slap your mama and pray to God." This is the only video out of all of them that actually worked. Thank you so much for uploading this, and I will definitely like and subscribe 👍
@@applianceflipper8590 Just hoping for an answer to my issue. Mine is just like the one in the video and I've tried both resets and I get nothing. When I plug my machine back in after the two minutes, the click is very, very faint when the board or whatever is rebooted and then there is a very faint humming that starts. Any idea?
Actually, at least in the whirlpool washers (and the other brands that my dude mentioned) the manuals are placed inside the steel frame that makes up the entire washer, sometimes you have to remove the lid assembly to see it, but most commonly flipping over the washer should allow you to see it.
Thank you! I followed all your instructions. I think closing the lid 6 times fixed my machine. It defaulted back to factory reset. Thank you so very much! I wash my family’s laundry most every day for five people and I just can’t handle buying another washer at the moment. Thank you very much!!!
ONLY ONE THAT WORKED! Just like others have posted. You should add digital payment link! Love you, you just saved me $$ and made it so I have more time to spend with my son!
Sir!!! YOU ARE THE MAN!!! Thanks for giving us such a clear and easy to understand procedure for this reset/recalibration of the Whirlpool washing machine. Your machine is exactly like mine and without your help I would have been calling the repair man!! Can't thank you enough! God Bless you and keep you and your family safe and happy always!! Blessings!!! Greg and Mira in South Carolina! :) :)
I have tried to reset my washer for 2 days after accidentally flooding it by soaking too many little bathmats at once. I tried several other videos, but this one was the only one that gave such clear instructions and included what to do just before re-calibrating and what to do afterwards. My machine is finally working right!!Thank you appliance flipper!
Your video just saved us a TON of money. The service tech told us the controller was bad and we should buy a new washer. We saw your video and gave it a shot. Worked like a charm! The problem of the cycle not completing is fixed! Thank you!! 🎉❤
Thank you so much! My machine stopped completely with the lid locked and it went off. Turned it 3 times and unplugged and plugged in and it worked !! Thanks again!
Just watched this video, and you did a FAR better job of actually narrating the steps than they did in the other videos that I have seen. Clear and concise!
U saved this mum from new year's laundry mess & maintenence fees. Add a donate link or something! God bless U for this video! Clear instructions & methodical.⭐️⭐️⭐️⭐️⭐️
This was the best video on the subject. We tried to get out machine out of Wash mode for 2 days, following other videos, but they clearly left out some steps. This video fixed the problem the very first time! Thank you appliance flipper!
well this fellow is awesome , It has been 5 months and my machine is still going strong, and it is the only video that worked for me and was so so easy , Thank you sir you saved me so much money GOD BLESS YOU.
My machine hasn't worked right since I bought it. It sits and clicks and won't stop even when I unplugged it and plugged it back. This video it is the best one I have come across. And this is the second time I have had to reset it. Thank you.
Cant believe i went through millions of videos ..turning left and right .. and came upon this one .. worked immediately !!!! .. thank you so much .. thought I wasnt going to wash today !!! .. keep up the good work .. got another subscriber 😊
Thanks. Most videos only cover the process to reset and recalibrate a washer. I only needed the simple reset you provide. In a little over 2 minutes my washer was running normally.
The video was well explained and very helpful. This method actually troubleshooted my washer. I was very frustrated and wanted to call a technician however you definitely helped big time. Thank you
So I had two issues going on after cleaning out my drain line and having to flip the top back to pull out a rag that had wedged itself between the basket and washer wall- lid lock was acting up and not enough water was flowing in. This recalibration fixed both issues. This video will save you time and money if it works for your machine so def give it a try- this gentleman knows what he is doing! Many thanks!
I finally understood a RUclipsr knew how to give instructions u deserve a like follow and a sub ty from Texas keep making videos my washer dripping from inside help me 811 not 9 god bless you
This video was exactly what I needed! My washer had suddenly started having problems, could find no mechanical failures? This reset it! Thank you so so much.
U just saved my parent $800. THANK YOU. Watched 20 other videos the require a phd in washer mechanic science ( Lol ) to complete. This was was straight to the point, quick and easy! Ty!
Thank you so much! The first reset worked for me. I put extra clothes in after it was filling. Wouldn't restart. As he described...... I turned the knob 3 times counterclockwise, unplugged for 2 minutes, plugged in, and pressed the start button!
Thank you brother ✊🏾 this worked for me as well. I had to run a cycle without clothes in the basket. I was able to wash normally after. To everyone washing dont overload your washer!
Just want to say thank you and God bless you I have used your videos to fix my washer so many times you have saved me so much money God bless you and I'm sure I'll be back but I will share your video all the time
Dude! You saved me! I was ready to quit and found yours! After the 100th time with other videos yours worked first try!!!! Keep it up! I subscribed! Thank you!!!!
Mine is the same can u help me what u did bcoz I filled all his steps in the video and all lights came up and wishing 5 seconds it picked rise and green light stuck there and started filling water and then Sam e shot again and the press start button for about 10 seconds and it will drain all the water and again back to step one press start and it shows sensing light and then picks rinse and starts filling in water… what the hell is going on ? This sis in a row three times… can I get my clothes washed at all…. Bcoz it did not spin to wash I. The wash mode… it kept made that stuck up sound as if trying to pick up but not getting enough current or power or energy key doing it until I manually pressed start button and then again it released water and as I press start for 5-10 seconds it will go to sensing and jump to rinse and start taking in water….. 😡
Thank you so much at first I did exactly what you said it didn't work I thought I just left alone and it started Hallelujah!!Hallelujah!!Thank You So much and you said how to do the instructions so easy and clear to understand the other people say it to fast and hard to understand The washing machine Working Yes!!👏👏👏👏👏Thank You So Much
I just want to say thank you. I appreciate your video. I watched a few other videos on RUclips and I just wasn’t getting it and I saw your video and I got it.🎉
Thank you so much for this video. I have came back to it so many times. There has been many times my washer has been messing up and I had to reset it. I finally just replaced the belt and used this video to reset right after. Hopefully I won't have any more problems after this.!! Thank you!!!!
This worked beautifully ❤ thank you so much! I unplugged, plugged back in and did the lid lift six times then pressed the start button for five seconds. I heard a click and the lights all went off and my washer reset 😊 works great again
You are an amazing gentleman and thank you for your kindness and sharing your much needed knowledge to save us all from these disposable appliances they sell now. Thank you thank you my washer is up an running right now thanks to you 😊
Great video! I installed a new shift actuator on my washing machine. It wouldn't work correctly until I followed these simple steps to reset the washer. Thanks!
so grateful for your help, this worked when i'd almost given up. love your explanation and easy direction. my 12 year old maytag washer is running again!
Thank you so very, very much for taking your time and sharing your video. This is first time i have seen any of your videos. I assure you i will be watching all. I love the fact that you go into detail and show all the steps. Some of us need that😊
Your steps were clear and concise. I have the schematic found inside the cavity of the nobs (took the back off). It only showed the dial steps. Nothing to prepare to do it. Thanks!
Thank you! this helped. A lot of videos say to do a full 360 turn at the start not just turn it to the left once to start the re calibration on the machine. thanks!
I've had to replace the lid lock, drive motor, and the shift actuator from my washing machine after a hole busted in the drum, I don't know what caused everything to fail at once but this helped after replacing all the parts. Thanks man
God bless you Sir for posting this! After I assesed my cold water inlet valve was the problem and changed it yet still stuck on wash I went back to my former sailor ways and people thought I had fallen from Grace what with all the expletives, just kidding. You sir are my hero. God bless you and keep you.
I have a whirlpool mode WTW5000DW1, which can not re-start often lately after 5 years in service. The first two methods do not work. The last method of lifting the lid did the trick. Thanks for posting.
Fallowed his direction exactly and my machine did everything just like in the video. I have watched other videos but this one was easy to follow.
They don't want you to repair it they want you to. Get a new one App have been work for years years lasts 25 30 parts you useing not needed
Thank you for sharing this information it worked for my washer. Thank you
❤same with my machine, this man makes it simple and easy to follow through the directions on his video,
❤same with my machine, this man makes it simple and easy to follow through the directions on his video,
Yes! You are the only one who can fix it!
I've watched every video on RUclips about this so far. A bunch of "Turn it left 80 times, right 40 times, slap your mama and pray to God." This is the only video out of all of them that actually worked. Thank you so much for uploading this, and I will definitely like and subscribe 👍
LOL
@@applianceflipper8590
Just hoping for an answer to my issue. Mine is just like the one in the video and I've tried both resets and I get nothing. When I plug my machine back in after the two minutes, the click is very, very faint when the board or whatever is rebooted and then there is a very faint humming that starts. Any idea?
That's part of the reboot process.@@randibgood
@@applianceflipper8590
But it didn't reboot. Didn't work any way I tried it.
That’s why I could never get this to work. I forgot the part about slapping my mama LMAO.
I watched around 15 videos on this topic and could never get it to work. Watched you once and worked first time. Thanks!
This is so crazy. You don’t see that in any of your manuals that you get when you buy a new washing machine. Absolutely crazy thank you.
Actually, at least in the whirlpool washers (and the other brands that my dude mentioned) the manuals are placed inside the steel frame that makes up the entire washer, sometimes you have to remove the lid assembly to see it, but most commonly flipping over the washer should allow you to see it.
Thank you! I followed all your instructions. I think closing the lid 6 times fixed my machine. It defaulted back to factory reset. Thank you so very much! I wash my family’s laundry most every day for five people and I just can’t handle buying another washer at the moment. Thank you very much!!!
ONLY ONE THAT WORKED! Just like others have posted.
You should add digital payment link! Love you, you just saved me $$ and made it so I have more time to spend with my son!
Sadly no success 4 Me. I'll probably remove & inspect that control board.😒
Sir!!! YOU ARE THE MAN!!! Thanks for giving us such a clear and easy to understand procedure for this reset/recalibration of the Whirlpool washing machine. Your machine is exactly like mine and without your help I would have been calling the repair man!! Can't thank you enough! God Bless you and keep you and your family safe and happy always!! Blessings!!! Greg and Mira in South Carolina! :) :)
I have tried to reset my washer for 2 days after accidentally flooding it by soaking too many little bathmats at once. I tried several other videos, but this one was the only one that gave such clear instructions and included what to do just before re-calibrating and what to do afterwards. My machine is finally working right!!Thank you appliance flipper!
Good
Your video just saved us a TON of money. The service tech told us the controller was bad and we should buy a new washer. We saw your video and gave it a shot. Worked like a charm! The problem of the cycle not completing is fixed! Thank you!! 🎉❤
Thank you a hundred times over!! After 2 days and too many videos to count, finally , SUCCESS!!! Wish I had found this one first!!!!
Thank you so much! My machine stopped completely with the lid locked and it went off. Turned it 3 times and unplugged and plugged in and it worked !! Thanks again!
He is the only one that I found on RUclips that knows what he was talking about I followed his directions and it worked perfect
Just watched this video, and you did a FAR better job of actually narrating the steps than they did in the other videos that I have seen. Clear and concise!
Very helpful who knew a washer was so electronically annoying
I am quite handy with diag and repair but I never would have figured this out myself. saved hours of frustration and half of my vocabulary.
This guy is the only one that had it right I've finally got my washer going thanks to this video,good on you man and thank you
This really worked. Took a couple tries, lack of attention on my part. Best video I found, anyone can do it if I can.
U saved this mum from new year's laundry mess & maintenence fees. Add a donate link or something! God bless U for this video! Clear instructions & methodical.⭐️⭐️⭐️⭐️⭐️
This was the best video on the subject. We tried to get out machine out of Wash mode for 2 days, following other videos, but they clearly left out some steps. This video fixed the problem the very first time! Thank you appliance flipper!
well this fellow is awesome , It has been 5 months and my machine is still going strong, and it is the only video that worked for me and was so so easy , Thank you sir you saved me so much money GOD BLESS YOU.
My machine hasn't worked right since I bought it. It sits and clicks and won't stop even when I unplugged it and plugged it back. This video it is the best one I have come across. And this is the second time I have had to reset it. Thank you.
Cant believe i went through millions of videos ..turning left and right .. and came upon this one .. worked immediately !!!! .. thank you so much .. thought I wasnt going to wash today !!! .. keep up the good work .. got another subscriber 😊
It worked!!! Yes, I was about to pay $350 to fix my washer. Thank you. Thank you.
Thanks. Most videos only cover the process to reset and recalibrate a washer. I only needed the simple reset you provide. In a little over 2 minutes my washer was running normally.
Thank you! After 5 other videos you detail explanation, plug and door move got me back to a functiioning washer!
The video was well explained and very helpful. This method actually troubleshooted my washer. I was very frustrated and wanted to call a technician however you definitely helped big time. Thank you
So I had two issues going on after cleaning out my drain line and having to flip the top back to pull out a rag that had wedged itself between the basket and washer wall- lid lock was acting up and not enough water was flowing in. This recalibration fixed both issues. This video will save you time and money if it works for your machine so def give it a try- this gentleman knows what he is doing! Many thanks!
I finally understood a RUclipsr knew how to give instructions u deserve a like follow and a sub ty from Texas keep making videos my washer dripping from inside help me 811 not 9 god bless you
Thank you for posting this. I nearly returned my brand new machine as it seems it was never calibrated. I now works as it should
I've had to use these methods numerous times with my piece of crap whirlpool washer, it works, thank you!!!
This video was exactly what I needed! My washer had suddenly started having problems, could find no mechanical failures? This reset it!
Thank you so so much.
U just saved my parent $800. THANK YOU. Watched 20 other videos the require a phd in washer mechanic science ( Lol ) to complete. This was was straight to the point, quick and easy! Ty!
Thank you so much! The first reset worked for me. I put extra clothes in after it was filling. Wouldn't restart.
As he described...... I turned the knob 3 times counterclockwise, unplugged for 2 minutes, plugged in, and pressed the start button!
Thank you brother ✊🏾 this worked for me as well. I had to run a cycle without clothes in the basket. I was able to wash normally after. To everyone washing dont overload your washer!
Just want to say thank you and God bless you I have used your videos to fix my washer so many times you have saved me so much money God bless you and I'm sure I'll be back but I will share your video all the time
Dude! You saved me! I was ready to quit and found yours! After the 100th time with other videos yours worked first try!!!! Keep it up! I subscribed! Thank you!!!!
Very knowledgeable. Knew exactly what he was talking about. Video was easy to follow and everything that he taught worked perfectly. Great job!!!
It worked for our washer that was stuck on the rinse light, thank you so much!
Mine is the same can u help me what u did bcoz I filled all his steps in the video and all lights came up and wishing 5 seconds it picked rise and green light stuck there and started filling water and then Sam e shot again and the press start button for about 10 seconds and it will drain all the water and again back to step one press start and it shows sensing light and then picks rinse and starts filling in water… what the hell is going on ? This sis in a row three times… can I get my clothes washed at all…. Bcoz it did not spin to wash I. The wash mode… it kept made that stuck up sound as if trying to pick up but not getting enough current or power or energy key doing it until I manually pressed start button and then again it released water and as I press start for 5-10 seconds it will go to sensing and jump to rinse and start taking in water….. 😡
Thank you so much at first I did exactly what you said it didn't work I thought I just left alone and it started Hallelujah!!Hallelujah!!Thank You So much and you said how to do the instructions so easy and clear to understand the other people say it to fast and hard to understand The washing machine Working Yes!!👏👏👏👏👏Thank You So Much
I just want to say thank you. I appreciate your video. I watched a few other videos on RUclips and I just wasn’t getting it and I saw your video and I got it.🎉
Thank you so much for this video. I have came back to it so many times. There has been many times my washer has been messing up and I had to reset it. I finally just replaced the belt and used this video to reset right after. Hopefully I won't have any more problems after this.!! Thank you!!!!
I’ve Watched PLENTY Videos And Couldn’t Do It..But This My First Time Watching And It Worked On The First Try Step By Step!
This worked beautifully ❤ thank you so much! I unplugged, plugged back in and did the lid lift six times then pressed the start button for five seconds. I heard a click and the lights all went off and my washer reset 😊 works great again
Very helpful, looked at many videos and your was the best .
You are an amazing gentleman and thank you for your kindness and sharing your much needed knowledge to save us all from these disposable appliances they sell now. Thank you thank you my washer is up an running right now thanks to you 😊
definitely helped me fixed my washer problem. Couldn't find info anywhere. and u got the same washer I have in your video. Thank you for your help
Oh wow. That felt like opening a safe but it worked!
Thanks man. Watched several videos to try to get this done. Yours is the way. Thank you.
Thank you . Very accurate information with good slow paced video .
YES!!! I learn not so fast. Just what I needed to understand and fix my Maytag! Thanks! Subscribed!
Thank you! I haven't tried this way yet. There are so many different ways to recalibrate.
Thank You!!!
Thank You for taking the time and effort to produce these tutorials. You made my day. Bless You.
Great video! I installed a new shift actuator on my washing machine. It wouldn't work correctly until I followed these simple steps to reset the washer. Thanks!
thank you, sir, it was lifting the lid six times that did the trick! Have a great day!
Opening and closing lid 6 times did the trick,thanks a bunch.
so grateful for your help, this worked when i'd almost given up. love your explanation and easy direction. my 12 year old maytag washer is running again!
Your video is the only one I found with the correct clicks to recalibrate it. Got mine going now, thank you..
Omg! This really works. I’m subscribing and with the way appliances are made today I know I’ll be back!
Hopefully that issue was stuck on sensing mode like mine so i can have hope
@GodisGood941 did u solve your washer problem. The recalibrate reset methods did not work for me
@@markg37xs yeah when the repair guy came over he messed with the harness and i think that fixed it.
Thank you so very, very much for taking your time and sharing your video. This is first time i have seen any of your videos. I assure you i will be watching all. I love the fact that you go into detail and show all the steps. Some of us need that😊
This is a fantastic video. Filmed and demonstrated clearly and informative. So much better than all the others. Thanks very much!
Thanks so much, ours didn’t even want to come on. But these steps to reset and recalibrate worked. Thanks! God bless you.
Your steps were clear and concise. I have the schematic found inside the cavity of the nobs (took the back off). It only showed the dial steps. Nothing to prepare to do it. Thanks!
Thank you! this helped. A lot of videos say to do a full 360 turn at the start not just turn it to the left once to start the re calibration on the machine. thanks!
I've had to replace the lid lock, drive motor, and the shift actuator from my washing machine after a hole busted in the drum, I don't know what caused everything to fail at once but this helped after replacing all the parts. Thanks man
Absolutely wonderful the way he explained that slow so you could understand it and it really
God bless you Sir for posting this! After I assesed my cold water inlet valve was the problem and changed it yet still stuck on wash I went back to my former sailor ways and people thought I had fallen from Grace what with all the expletives, just kidding. You sir are my hero. God bless you and keep you.
Awesome video. Worked just like you demonstrated. Glad I found you.
This was easy to follow and to the point and actually fixed my problem, thank you Sir!
Best video I've watched, what a good explanation you do,easy to follow, thank you
Thank you!! the calibration and resetting fixed my issue
Outstanding !!! Your Instructions Worked, Problem Solved !!!
You are amazing. Been working since i followed your video as u said step by step
Thank you SO much! Your instructions fixed the problem.
I have a whirlpool mode WTW5000DW1, which can not re-start often lately after 5 years in service. The first two methods do not work. The last method of lifting the lid did the trick. Thanks for posting.
Echoing everyone else - I tried 3 other videos and this was the only one that fixed my issue. 6mo old machine and giving headaches
Worked immediately, can not thank you enough.
Exactly... saved me some coins
I will have to do this calibration tomorrow and see how everything goes. Appreciate your video
Sir !! You are amazing 🤙🏼 thanks. I followed your advice like 1 2 3 and just like that, it worked. Saved me so much money 💰 yes I subscribed 🤙🏼🙏🏼
It worked! Thank you! You are easy to follow along with.
Thank You so much. Saved me from buying another washer
God Bless.
Thank you! You definitely helped me to fix my problem just by unplugging, then open and close the lid 7 times. AWESOME!! ❤🎉
Thank you. Instructions were easy,and helped so much
Thank you I just changed my my control board and I couldn’t figure out how to recalibrate my washer. Thank you soo much
Best instructional video for recalibration. Thanks.
Thank you very much. Your vodio has been very helpful in getting my washing machine washing again.
This was such a great help. Thank you so much for sharing ❤️
How my God I worked totally, my washer was not starting, thank you 🙏
THank you perfect fix to get to the recalabration mode made my day
Very clear and easy to follow. Thank you so much! 😊
I was looking for a way to bypass the lid lock on the Whirlpool....I liked the calibrate process
Thanks for the videos a great video keep up the great work. I love all your videos.
Remember a time when everything was On/off, that was it.
Thank you so much! My next washer will be an old fashion, no mother board with an agitator. These HE models are for the birds.
Love your video man. So glad I watched, thank you.
Thank you so far so good. I’ve never had a washing machine like this and your video helped me a lot.
Thanks very much sir this actually worked on my washer ur a boss may God bless u
I did exactly what you said and oh my God did in my washer go crazy in a good way
same
I’m so happy this worked for so many, unfortunately it didn’t work on my Crosley machine. Peace to you.
I have the same machine. Does your sense fill work? Mine just fills all the way with water even if it's empty with no clothes.
Thank you so much! You directions were right on point!
This video is a life saver
Great advice - was able to reset after power surge