Great video! Can you do one on sizing for 1/12 scale action figures. Also how to sculpt a customized hand with the right size hole to be attached to the 1/12 scale action figures action figure? Thank you!
Hey I have a question, I'm designing a small (less than 3 inches) articulated dragon skeleton that isn't print in place (there's just no large flat surfaces). I normally do just PLA printing but it's not really possible for this print so I'm trying for resin. Is this print possible? What joints should I use? Looking around a lot of the joints seem to be placed on separate parts that you join together, with how thin they would have to be, I'm worried about them breaking if I do it like that. Any advice would be greatly appreciated!
@@dragonk4tz470 I would make the chain joint as thick as possible within the model. It may work with resin, but you’re going to need to play with it, especially the tolerances around the joints. I’ve actually made flexies with resin and they’ve worked out most of the time. There has been a few that have fused together at the joints. Good luck! Let me know how you make out 3D printing the dragon. 🐲 😁
A link might have been helpful and I can't take an app seriously that doesn't have a "mac" version of itself available no matter how good it is. At least I can't find one. I'd never use an ipad or Android for this stuff. If there is a mac app, then as I said, a link would have been useful as I didn't see a mac link on their site
![Autodesk Fusion [New Feature] Mesh Alignment](http://i.ytimg.com/vi/UrYGEtHCGMU/mqdefault.jpg)
Yay ball joints finally found this been looking f o r e v e r
Awesome! 😀
Sweet
Awesome that you use bambu lab and nomad sculpt as this is my exact setup aswell makes you number one for my printing RUclips channel for sure
@@SkyTaylor-w1p Thank you! I have a video on snap in ball and socket joints coming out today also if you are interested. 😀
Thanks for this tutorial!!!
@@Scheettini You’re welcome! I hope you found it useful! 😀
Great video! Can you do one on sizing for 1/12 scale action figures. Also how to sculpt a customized hand with the right size hole to be attached to the 1/12 scale action figures action figure? Thank you!
Thank you! Sure! I have a couple of video to make then I’ll work on it. 😁
Hey I have a question, I'm designing a small (less than 3 inches) articulated dragon skeleton that isn't print in place (there's just no large flat surfaces). I normally do just PLA printing but it's not really possible for this print so I'm trying for resin.
Is this print possible? What joints should I use? Looking around a lot of the joints seem to be placed on separate parts that you join together, with how thin they would have to be, I'm worried about them breaking if I do it like that.
Any advice would be greatly appreciated!
@@dragonk4tz470 I would make the chain joint as thick as possible within the model. It may work with resin, but you’re going to need to play with it, especially the tolerances around the joints. I’ve actually made flexies with resin and they’ve worked out most of the time. There has been a few that have fused together at the joints. Good luck! Let me know how you make out 3D printing the dragon. 🐲 😁
@@MakerBuildIt Alright, thank you!
how do you make a snap in ball joint?
@@jamessmallwood7448 Working on that video as we speak! Should be out in about a week or so! 😀
@@MakerBuildItyou're awesome
@@AliDraws Here you go! ruclips.net/video/Hv5AEqQ7B38/видео.htmlsi=4ZOZYcXYcmx_oine
A link might have been helpful and I can't take an app seriously that doesn't have a "mac" version of itself available no matter how good it is. At least I can't find one. I'd never use an ipad or Android for this stuff. If there is a mac app, then as I said, a link would have been useful as I didn't see a mac link on their site
It is an iPad and Android app. Many people use it for sculpting 3D Models. I added the link into the description. 😁
@@MakerBuildIt 👍🏻