Did that on a small prybar (1 foot long nailpuller). After the finishing knot I worked the end of the cord back under the wrap with marlinspike and curved hemostat pliers. Finally, put the whole thing into a breadmaking tin and poured boiling water onto it. The heat shrinks the wrap. Most likely ruins the cord, but for the wrap, it is very useful.
Thank you for the great video, wrapped 1/2 my walking stick with 500 paracord (has firestarter string and fishing line inside wrapped paracord) for survival situations.
This awesome tutorial did 5 things. 1. I Learned a new skill. 2. Gave the otherwise flat metal triangle butt stock a 1/4” inch cheek riser as I had hoped. 3. Made the metal buttstock albeit still cold how ever completely tolerable to use in cold temperature conditions as intended. 4. I also incorporated a sling loop at the end. 5. Finally as well as added some survival cordage in the event. Thank you so much for putting this out there. 🎉
I used to do a variation of this kind of thing when I was a kid except we called it "finger knitting" if we did it with string or wool yarn. It can be used for shortening /strengthening a piece of line. It made for some strong, though rather bulky line. Thank you for this excellent demonstration.
Thank you for this video! Clear and concise instructions. This wrap looks fantastic, and when tightened properly, it doesn't move. It's a little hard to start when it's all loose, but once you get a couple loops through it becomes much easier.
If you take the time to really pll each bite really tight, the wrap will not move even if placed on a slippery plastic handle. Very nice! Worked perfect for my Fiskars hatchet!
This video really helped me. I'm making a survival axe and wasn't sure if I should put a paracord handle on because I didn't know how. But this video really helped me out. Thank you so much
Thanks man!! Just got a Hults Bruk axe for Christmas and this was a nice way to add a great handle grip. After an initial subpar first try the second attempt worked perfectly. Couldn't have done it without this well made guide!!
I just did two of these after watching your video, the first one was practice (actually done on a knife sheath) and the second one turned out perfect thanks to your help!
Thank you for this tutorial. I had never done any paracord wrapping and needed something to finish a walking stick. With your help, it turned out great. Thank you so much, you really helped me out!
I have watched your video two times now. Thank you very much. It is the most usable, purposeful handle wrap, if you will. I have an axe, and I have a big camping knife, and this is the way I’m going to do it. Thank you very much again.
Your videos are the best knotting videos that I have ever seen; you work slowly without obstructing your work, display each step clearly, and follow up by positioning the cord in an orderly way to prepare for the next step. I have used your videos for awhile, not just for paracord, but for hemp and cloth, and other materials as well. Specifically, some of your work flow, greatly simplifies making these knots; anyone searching for DIY instructions on the same knots that you make will be bogged down by extremely complicated methods like using pins to secure a knot in 15 places before crossing a single section of cord and then unpinning, flipping, and pinning again. Lastly, you don't aimlessly mumble and mutter in order to extend a 5 minute video into a series of 10 videos lasting 45 minutes each. Thank you for your contribution to this craft.
Great video. Think I am going to make one of these on my old Estwing maul that used to have stacked leather handle. Last piece finally came off. Guess it done pretty good rolling around tool boxes and shop since new in 83’
I bought a Cold Steel tactical katana, but it came with an awful grip. It was like holding a chainsaw blade. I used the information in your video to warp over it with much more comfortable 550 paracord and now the sword is AMAZING and I have about 45 feet of paracord if I really need it! Thank you for your video! :D
Thanks for the instruction! First time I've tried this and your video explained it well. I've been turning some hickory and ash bats and will apply this technique to the handles. I also have some bokken (wooden practice swords) that I will try this on. Thanks again for taking the time to post this!
I didn't go way down on the comment list. Two things; One:good simple instructional. Was to the point and clear. Two:thanks for not trolling and making a stink about this man's accent. Keep it up, bro! 👍😎
Great video ive looked at plenty found them confusing left my head spinning but this video I found very informative best ive seen not rushed showing in detail great job 👍
I did this wrap on an old ax of mine and it turned out awesome! I recently picked up a new ax and I plan on doing the same with it. With the first ax (after the wrap was done) I coated the para-cord with polyurethane. It took 3-4 coats before the para-cord was completely saturated. Once it dried, the cordage was (and still is) rock hard. It makes a for a much better handle guard to protect from the occasional over-swing. The only draw-back is that the para-cord is now on the handle permanently and cannot be used for anything else... Either way I like it! Thanks for the excellent tutorial :-)
Just a suggestion, when you are doing this wrap, do the wrap so that the "knots" or loops are in line with where your fingers are going to grip the handle.
I've just made a good job of doing this wrap on a ceramic sharpening rod and here are my tips: 12 feet of cord makes a 4" wrap on a 1" diameter rod Use a piece of sellotape to hold the vertical strands in place while you do the first couple of loops Smooth jawed needle nose pliers are helpful for tightening up each loop You can pass the working end back under the wrap using a slim lacing fid and hide it
That is a nice axe and well worth putting the handle in correctly. You would need to remove the wedge first, then remove the handle, and re-insert it correctly.
Thank you so much. This is totally awesome. I am definitely adding this to my "to do "list. You make it look easy but I know I will be in for a long haul but it will be worth it. Especially if it comes out anywhere as good as yours. Thanks again. 😊
I tried it and the beginning of it was looking pretty bad, but I knew I needed practice so I kept going. By the end of was looking good, all the same. I unwrapped it and started again and totally got it! My ax handle is odd shaped so I had to push them tight, not like yours where you cab see the handle through the back side. But now the knot side doesn't look very good. Do you have a suggestion for an unevenly shaped handle? Thank you for taking the time to create edit and post your videos, much appreciated!! Just think...100 years from now someone will use your video to wrap an ax handle!
this has been very helpful! I am making my own katana handle from a small axe handle, and love this look with it! I will probably do the sheath in paracord as well!!
+Daniel Lessard That is one way of doing it. I'd personally immerse it in hot water if possible. You only leave it in for about 15 seconds and it should be good to go. Mark
Great video. I wish you had a video on how to fix a walking cane handle. Mine needs repaired and I don't want to buy a new cane because the grip on the handle is bad.
got to admit, that was harder than it looked, but I got it. she ain't pretty but I finally made a handle for my old hatchet c: practice makes perfect right? Great video and thanks. I'm definitely subbing
Howdy. This was very simple to do once you figure out how to secure the first knot....was wondering if there was a way to do it on both sides....I have a crkt kangee tee hawk and I think a double sided version of this would be perfect if I took the scales off as it would have a palm swell making the polymer stock handles kind of bunk imo....if so that would be great if you could do a video or link me to one!!
Here's a question: if using this technique for a hatchet overstrike guard, is there a benefit to whipping the axe handle area below the head first, then doing the second layer with the patterned bites?
Did that on a small prybar (1 foot long nailpuller). After the finishing knot I worked the end of the cord back under the wrap with marlinspike and curved hemostat pliers. Finally, put the whole thing into a breadmaking tin and poured boiling water onto it. The heat shrinks the wrap. Most likely ruins the cord, but for the wrap, it is very useful.
Thanks that's exactly what I'm looking to wrap
The fact that all 3 of us came here looking to do this for our prybars makes us real brothers
I did rubber bands under the wrap for hand comfort
Thank you for the great video, wrapped 1/2 my walking stick with 500 paracord (has firestarter string and fishing line inside wrapped paracord) for survival situations.
I love handle wraps. They can make something so cheap look so beautiful.
This awesome tutorial did 5 things.
1. I Learned a new skill.
2. Gave the otherwise flat metal triangle butt stock a 1/4” inch cheek riser as I had hoped.
3. Made the metal buttstock albeit still cold how ever completely tolerable to use in cold temperature conditions as intended.
4. I also incorporated a sling loop at the end.
5. Finally as well as added some survival cordage in the event.
Thank you so much for putting this out there. 🎉
I used to do a variation of this kind of thing when I was a kid except we called it "finger knitting" if we did it with string or wool yarn. It can be used for shortening /strengthening a piece of line. It made for some strong, though rather bulky line.
Thank you for this excellent demonstration.
Thank you for this video! Clear and concise instructions. This wrap looks fantastic, and when tightened properly, it doesn't move. It's a little hard to start when it's all loose, but once you get a couple loops through it becomes much easier.
It's like a japanese"katana sword"
If you take the time to really pll each bite really tight, the wrap will not move even if placed on a slippery plastic handle. Very nice! Worked perfect for my Fiskars hatchet!
im putting on my Fiskars hatchet also lovely piece of gear
Got the X7 or the black one? I just got mine today actually. How funny!
This video really helped me. I'm making a survival axe and wasn't sure if I should put a paracord handle on because I didn't know how. But this video really helped me out. Thank you so much
Thanks man!! Just got a Hults Bruk axe for Christmas and this was a nice way to add a great handle grip. After an initial subpar first try the second attempt worked perfectly. Couldn't have done it without this well made guide!!
I just did two of these after watching your video, the first one was practice (actually done on a knife sheath) and the second one turned out perfect thanks to your help!
Thank you for this tutorial. I had never done any paracord wrapping and needed something to finish a walking stick. With your help, it turned out great. Thank you so much, you really helped me out!
Thank you for such a positive comment!
Mark
That's exactly what I have planned, on the off chance you see this, how did it turn out?
I have watched your video two times now. Thank you very much. It is the most usable, purposeful handle wrap, if you will. I have an axe, and I have a big camping knife, and this is the way I’m going to do it. Thank you very much again.
Hey mark, just wanted to say thank you for all of your tutorials. You have been a big inspiration to me!
Hey!
Thank you for your kind comment! I do appreciate it!
Mark
Thanks for the video! Great instructions. Made my 1st bushcraft mallet and wrapped the cedar handle. Looks and feels great.
Your videos are the best knotting videos that I have ever seen; you work slowly without obstructing your work, display each step clearly, and follow up by positioning the cord in an orderly way to prepare for the next step. I have used your videos for awhile, not just for paracord, but for hemp and cloth, and other materials as well. Specifically, some of your work flow, greatly simplifies making these knots; anyone searching for DIY instructions on the same knots that you make will be bogged down by extremely complicated methods like using pins to secure a knot in 15 places before crossing a single section of cord and then unpinning, flipping, and pinning again. Lastly, you don't aimlessly mumble and mutter in order to extend a 5 minute video into a series of 10 videos lasting 45 minutes each. Thank you for your contribution to this craft.
Great video. Think I am going to make one of these on my old Estwing maul that used to have stacked leather handle. Last piece finally came off. Guess it done pretty good rolling around tool boxes and shop since new in 83’
I bought a Cold Steel tactical katana, but it came with an awful grip. It was like holding a chainsaw blade. I used the information in your video to warp over it with much more comfortable 550 paracord and now the sword is AMAZING and I have about 45 feet of paracord if I really need it! Thank you for your video! :D
Now that is what I like to hear!
Mark
I am doing the same thing on my Katana
i love this wrap, no feeding it through, and quick to unravel. easiest one to learn so far! i'll be using the shit out of this one
Thank you. Very informative. I just finish wrapping a hatchet. Perfect instructions.
Excellent tutorial. I’ll be making a protective collar using this method. Thank you very much.
Thanks for the instruction! First time I've tried this and your video explained it well. I've been turning some hickory and ash bats and will apply this technique to the handles. I also have some bokken (wooden practice swords) that I will try this on. Thanks again for taking the time to post this!
I didn't go way down on the comment list.
Two things;
One:good simple instructional. Was to the point and clear.
Two:thanks for not trolling and making a stink about this man's accent.
Keep it up, bro!
👍😎
Great video ive looked at plenty found them confusing left my head spinning but this video I found very informative best ive seen not rushed showing in detail great job 👍
This is my favorite so far. Using for some extra flair on my motorcycle clutch and brake levers...
Wonderful wrap. It's on the handle of my backpack and looks terrific!
I did this wrap on an old ax of mine and it turned out awesome! I recently picked up a new ax and I plan on doing the same with it. With the first ax (after the wrap was done) I coated the para-cord with polyurethane. It took 3-4 coats before the para-cord was completely saturated. Once it dried, the cordage was (and still is) rock hard. It makes a for a much better handle guard to protect from the occasional over-swing. The only draw-back is that the para-cord is now on the handle permanently and cannot be used for anything else... Either way I like it! Thanks for the excellent tutorial :-)
Just a suggestion, when you are doing this wrap, do the wrap so that the "knots" or loops are in line with where your fingers are going to grip the handle.
That is a great idea
the front of the handle, in line with the blade
Wow. So simple and looks great. Thank you.
I am impressed, simple and effective, thankyou!
Boy he's slick with these tutorials
One of the best look and serve its functuoj!easy unwrap!
Gj!
Thank you! I used this on my mtb! It looks sweet and it is functional!
Thank you very much for your excellent explanation. I will sure make this on one of my axes.
You’re very good at explaining how to do this. Great job!
Very cool. I used tape to secure the finishing loop to the handle until I wrapped down to that point.
Great tutorial, I've been looking for a new wrap for hiking sticks and I think I found it here! Thanks.
I've just made a good job of doing this wrap on a ceramic sharpening rod and here are my tips:
12 feet of cord makes a 4" wrap on a 1" diameter rod
Use a piece of sellotape to hold the vertical strands in place while you do the first couple of loops
Smooth jawed needle nose pliers are helpful for tightening up each loop
You can pass the working end back under the wrap using a slim lacing fid and hide it
That is a nice axe and well worth putting the handle in correctly. You would need to remove the wedge first, then remove the handle, and re-insert it correctly.
Used this to make a new handle on my slingshot. Thanks heaps!
This is great. Thanks. I am going to use this to wrap the handle of a suitcase I use for flying to identify it.
Great video: clear, concise, nicely composed & lighted! Thank you!
Great instructions and awesome wrap. Thanks for posting this
the music at the end is in tiny pinball game app. it took me a few minutes to recognize.
thanks for a very useful video!
Thank you so much! I've been trying to figure out a good way to wrap my hiking sticks for so long.
+Gh0sTr3C
Hey!
Glad to hear you find it useful!
Mark
the instructions on this are so clear i think ill remember how to do it when i actually have the cord
Thank you so much. This is totally awesome. I am definitely adding this to my "to do "list. You make it look easy but I know I will be in for a long haul but it will be worth it. Especially if it comes out anywhere as good as yours. Thanks again. 😊
Excellent wrap for quick paracord recovery and use !
Good instructional !
Wulfy
I tried it and the beginning of it was looking pretty bad, but I knew I needed practice so I kept going. By the end of was looking good, all the same. I unwrapped it and started again and totally got it! My ax handle is odd shaped so I had to push them tight, not like yours where you cab see the handle through the back side. But now the knot side doesn't look very good. Do you have a suggestion for an unevenly shaped handle? Thank you for taking the time to create edit and post your videos, much appreciated!! Just think...100 years from now someone will use your video to wrap an ax handle!
this has been very helpful! I am making my own katana handle from a small axe handle, and love this look with it! I will probably do the sheath in paracord as well!!
Thank u...i learn now...practice makes a man perfect
this was the first thing i tryed to do with para-cord was easy and i like how you say shrink the wrap after the video was over and im done warping it
+Daniel Lessard
Hey!
You shrink the wrap after wrapping to tighten the grip it has around the handle.
Mark
+Paracord guild so just pour hot water on it ?
+Daniel Lessard
That is one way of doing it. I'd personally immerse it in hot water if possible. You only leave it in for about 15 seconds and it should be good to go.
Mark
Ahh a tightened birds nest rope coil essentially! Ive made quick bracelets of this technique as well 😁
I did my ape hangers on my Harley! Looks sick! Almost 100 ft a side
This is awesome !! Thanks for sharing!!
Great video. I wish you had a video on how to fix a walking cane handle. Mine needs repaired and I don't want to buy a new cane because the grip on the handle is bad.
Shouldn’t the knots be facing forward to take any impact vs the side?
Saving this to make sure my axe has a nice grip for the apocalypse👍
excellent tutorial thanks for posting.
I'm going to try that on a walking stick.I think it will look good.
I plan on using this wrap on a white oak staff/halberd/2 handed axe in the near future. Just need to find/make a suitable axe head.
Very good, well done, I learned something new and useful, thank you.🖖😎👍
I love these videos! Thanks for posting
What kind of wax do you recommend and how’s the best way to apply it? Thanks for the video
mine didnt look that good but thanks to u i was finally able to do one of these
Wow no TV tonight I got some wrapping to do thanxs for the post
sell your TV..get stuff done...lol
This was nice, I just did it on my sons sword thing from the renaissance festival. Thank you very much
So THAT'S how you do that! Thanks man!
Great video.
Other than the axe head is mounted upside down on the handle,,, nice paracord wrapping bro!
+Honestreview I lol'd at this too haha
Yep it was a funny one Bro!
Great video! Saludos
Think that axe head is upside down. Great video duder, thanks for sharing!
WOW, very nice and easy!!!
Traditionell-Skills rule!!!
Never heard the hot water trick before. Thanks.
got to admit, that was harder than it looked, but I got it. she ain't pretty but I finally made a handle for my old hatchet c: practice makes perfect right? Great video and thanks. I'm definitely subbing
Interested in how you make a wrist strap for a hatchet
that's cool and pretty easy. thanx for sharing!!
Entertaining video. Great tutorial. Who mounted your axe head upside down?
Good video!!
It almost has the look of a Katana handle, very nice
I used a 10 foot piece on a 1 inch diameter handle and got about 3 1/2 inches of wrap... going to need to get some more cord..
Great work
great video my friend!
Howdy. This was very simple to do once you figure out how to secure the first knot....was wondering if there was a way to do it on both sides....I have a crkt kangee tee hawk and I think a double sided version of this would be perfect if I took the scales off as it would have a palm swell making the polymer stock handles kind of bunk imo....if so that would be great if you could do a video or link me to one!!
Very nice, always wondered how that was done.👍
Great video very informative many thanks for sharing
EXCELLENT !!! Thanks a lot for this
awesome video
Great video
Easy to follow
Thanks
Awesome vid!
Nice job
Nice, thanks mate
Very nice! Thank you for sharing!
Thanks thats what i was looking for
Here's a question: if using this technique for a hatchet overstrike guard, is there a benefit to whipping the axe handle area below the head first, then doing the second layer with the patterned bites?
Brilliant!
Beautiful wrap but the head of your axe looks a little upside down
very good video.
Tanks for posting!
これはスゴい！
カッコいいし、実用的ですね！
Thank you for sharing
Thank you for teaching that.