Turns out amazing brother, I keep saying this man but you’re definitely great at your craft. Even if it’s a cheap job you still do good work! I’m sure the owner is happy
Man you are the goat you inspired me so much all most to the point that I wanted to do my own you tube channel advertising speedokote products and man on a side note I was super happy to see a longer video 👍🏾
Thanks for going through the plan you had for sanding. The rough jobs like your mustang can throw us off and the job can go sideways,wasting sandpaper and waste time. Again,nice work!
@@speedokoterefinishnetwork4937 Can I spray hot rod black paint over (dupli-color paint shop paint) base coat? I know you said speedokote can be sprayed over almost anything…
how the heck did i not see this guys content. been searching these paint jobs for a good while..... not cool for the algorithm, this is an awesome channel and never once did it ever come up in my searches..... sumthin wrong here
My Dude! You knocked it out of the park even though you had issues! Curious Marco why you don't use a cheese grater on the bondo to save all that sanding? Is it a flip? This one is a top 10 !
Hey Marco I have a question about the SMR 3500 LV-Q I'm think of buying to mix with some pearl to spray as a tri coat. Spraying 3 coats and then clear will work?
I would call that one "a bit rough" Seems the cars I call Rough here in Michigan have holes you can put your hand in😅 That sealer helps every paintjob, I think. Little extra money, but it's a nice foundation Lastly, just used the SMR 42 for the first time today! Impressive shine and reflection. Of course, I got some little nibs to buff out, but that's normal. I may go ahead and wetsand it before buffing. At least the hood. Sprayed the clear with 1.3 Iwatta lv2 cap and 2 compressors running. Really like that clear! It's going on every car that fits the budget from now on! I'll still use the cheaper Speedo clear for touch up jobs, repairs, ect. But for an overall job...man, I gotta go with the 42👍wooo!
I have to agree I shot an infiniti g37 convertible this weekend used the smr42 and the dv1 gun I purchased from you a month or so ago from you and admit there is no shrinkage or reduction in the gloss after 3 days. Wanted to thank you again for being honest and helping out the DIYers!!
@@speedokoterefinishnetwork4937 just when things are going pretty darn smooth...an issue pops up. Spraying the SMR 42 yesterday and got about 3 different areas with....FISHEYES! Not something I normally see. I cleaned and cleaned, so I believe I may have had contaminants in the air line. Oil maybe? Can't be sure, but dusted myself off today, sanded the entire side,clean,clean,clean, changed desiccant beads, sprayed a lot of air out of line, basically then did a flow coat and this time, got the results I am used to. A minor buffing to remove dust specs and I'm good to go. I flow coated the hood after wetsanding as well to bury the center stripe edge. And great results except those pesky specks. I tack over and over and still get the specks. Oops. Running long on comment. Another mistake I made was trying out an unproven gun that got good reviews. Got orange peel I didn't like. Went back to what I know. Iwatta W400 lv2 1.3. I know the gun and can dial it in for clear. I use it only for clear. Any one of my other guns is capable of base.Some day when I get sum extra jingle, I will try out the mark one eco if you continue to stock it.
That little sander you were using is that a harbor freight regular sander? You dont use a DA ? It looks amazing by the way . I have alot of questions anyways thanks. If you have time I have a 2013 ebony black mustang need to paint fender and door which are those black primered replacement panels. Im a novice dont want to keep car what products should I use economical primer and clear coat also does your brand make basecoat? Can you get your base coat a different brand than your primer clear coat?
Yea hf sander. Primer not really needed if you sand properly, base coat and clear coat we sell. Send them your paint code and we can send a quart of base with reducer. Clear coat just grab the ss1210 IMO only around 100 bucks works good
Hey Marco. That came out awesome! Two questions. 1.) When you do a full respray, do you do the door jams first or afterwards? I'd think first right? 2.) What was the colour code on that base coat? I absolutely love that colour! Keep up the great content 👍
Bought a can of basecoat activator and started adding a splash of it to all my paint for a little extra insurance Do you ever add the activator? Do you think it makes a difference in the paintjob?
Hey Bro , I’m a new Subscriber . I love your work . I have a 01 Cobra . Needs some paint work , nothing crazy . Where are you located ? I’m not sure if you have different level paint jobs because I’m just starting to watch your Vids but I am Highly Highly interested. I need your shop info ( location etc..)
I'm in pa, to save us both some time it might help if you stop by a local body shop for a free quote before coming to me. That way you can compare prices
@@speedokoterefinishnetwork4937 ok , I’m not far from you . I’m in Maryland. I will check a local bodyshop but if I come to you how do I get in contact with you ?
That was a junk pile, awesome job man! I know how difficult that color can be spraying without mottling, turned out amazing. Curious how many hours you had into this project?
Sucks the cheap paint made life difficult but I love the color. I know the guys that throw down some heavy/big flake will hit it with a wet sand before they put on their final layers of clear. More work but I guess if you just had sand paper and not alot of clear that would get it done lol
Авто/Мото
Turns out amazing brother, I keep saying this man but you’re definitely great at your craft. Even if it’s a cheap job you still do good work! I’m sure the owner is happy
Dude, watching the before and afters are so satisfying! Great job 👏🏻
Man you are the goat you inspired me so much all most to the point that I wanted to do my own you tube channel advertising speedokote products and man on a side note I was super happy to see a longer video 👍🏾
Thanks for going through the plan you had for sanding. The rough jobs like your mustang can throw us off and the job can go sideways,wasting sandpaper and waste time. Again,nice work!
Man it came out amazing 🤩🤩🤩🤩.nice job.
Dude you are basically my online mentor! I watch your vids everyday. Just want to say thanks for your time and effort you put in these videos.
Thanks man!!
@speedo That was quite the change up! The color looked green inside and it's def blue in the sun. Looks great as always man! Keep grinding!
Great fun job
Fantastic video..
Very impressive paint job 👏👌 Love the color :)
Another very amazing job✊🏾💯
You really do make it look it look easy!
This transformation was amazing! Car was totally trashed. As usual you make them great again 🙂 nice job dog. I'll take the car for awhile 😉
🤣🤣🤣🤣
Sick work my man 👍🏾 that color is amazing 🤩
I wonder if adding some flip adjuster would help those metallic flakes lay down.
Another killer job man. Super impressive considering what that started out like.
Thanks!
@@speedokoterefinishnetwork4937 Can I spray hot rod black paint over (dupli-color paint shop paint) base coat? I know you said speedokote can be sprayed over almost anything…
Bro that came out insane 👍💪
Another amazing paint job
Came out amazing
I love that blue! Pretty!!!!
Thanks!
how the heck did i not see this guys content. been searching these paint jobs for a good while..... not cool for the algorithm, this is an awesome channel and never once did it ever come up in my searches..... sumthin wrong here
Looks good!
That came out great. major improvement. sound advice. well done.
Thanks!
Outstanding job Marco your the man.
Thank you!
Looks good 👍🏻
really nice budget paint job!
Looks great, I'm Trying To Save up To Get My Corolla Repainted The Roof and The Hood Need it Bad it Needs Minor Body Work but That's it!!
I'd love to have that Mustang. Very nice.
Is the sealer/primer sandable for such a smooth finish? Or did it just lay flat? Or did you do wet on wet?
You make it look so easy.
I try
Great job brother 👍
Thanks!
My Dude! You knocked it out of the park even though you had issues! Curious Marco why you don't use a cheese grater on the bondo to save all that sanding? Is it a flip? This one is a top 10 !
Top notch work as always
Thanks!
That doesn't even look like the same car! Very sweet job!
You sir have some skills. Keep it up
Thank you !
Great job on the mustang
Appreciate it
Hey Marco I have a question about the SMR 3500 LV-Q I'm think of buying to mix with some pearl to spray as a tri coat. Spraying 3 coats and then clear will work?
Nice 90s color, too! Those were the days!
Yes!
I would call that one "a bit rough"
Seems the cars I call Rough here in Michigan have holes you can put your hand in😅
That sealer helps every paintjob, I think. Little extra money, but it's a nice foundation
Lastly, just used the SMR 42 for the first time today! Impressive shine and reflection. Of course, I got some little nibs to buff out, but that's normal. I may go ahead and wetsand it before buffing. At least the hood. Sprayed the clear with 1.3 Iwatta lv2 cap and 2 compressors running. Really like that clear! It's going on every car that fits the budget from now on! I'll still use the cheaper Speedo clear for touch up jobs, repairs, ect. But for an overall job...man, I gotta go with the 42👍wooo!
The impressive part about smr42 is that IT KEEPS 100% OF IT'S SHINE days after cure. A lot of other brands shrink back and gloss dies slightly
I have to agree I shot an infiniti g37 convertible this weekend used the smr42 and the dv1 gun I purchased from you a month or so ago from you and admit there is no shrinkage or reduction in the gloss after 3 days. Wanted to thank you again for being honest and helping out the DIYers!!
@@speedokoterefinishnetwork4937 just when things are going pretty darn smooth...an issue pops up.
Spraying the SMR 42 yesterday and got about 3 different areas with....FISHEYES! Not something I normally see. I cleaned and cleaned, so I believe I may have had contaminants in the air line.
Oil maybe? Can't be sure, but dusted myself off today, sanded the entire side,clean,clean,clean, changed desiccant beads, sprayed a lot of air out of line, basically then did a flow coat and this time, got the results I am used to. A minor buffing to remove dust specs and I'm good to go. I flow coated the hood after wetsanding as well to bury the center stripe edge. And great results except those pesky specks.
I tack over and over and still get the specks. Oops. Running long on comment. Another mistake I made was trying out an unproven gun that got good reviews. Got orange peel I didn't like. Went back to what I know. Iwatta W400 lv2 1.3. I know the gun and can dial it in for clear. I use it only for clear. Any one of my other guns is capable of base.Some day when I get sum extra jingle, I will try out the mark one eco if you continue to stock it.
@@BearBudgetTurbine tune into my live video Saturday and I will be addressing everyone's questions Saturday at noon
Big Mac Marco!
Wow!!😎😎😎😎😎😎😎😎😎😎😎😎
Any discount codes you can share with us. Great paint job
I thought the paint looked really good in the shop it looked green but outside it looks blue, nice job.
Don’t care for the color but you did a great job. I wish I would’ve tried that single stage primer on my last project
Bro how do you paint with the beard doesn't the mask leak? Not trying to shave but man I want to paint my car soon
What a transformation
Do you cut and buff all your jobs?
That little sander you were using is that a harbor freight regular sander? You dont use a DA ? It looks amazing by the way . I have alot of questions anyways thanks. If you have time I have a 2013 ebony black mustang need to paint fender and door which are those black primered replacement panels. Im a novice dont want to keep car what products should I use economical primer and clear coat also does your brand make basecoat? Can you get your base coat a different brand than your primer clear coat?
Yea hf sander. Primer not really needed if you sand properly, base coat and clear coat we sell. Send them your paint code and we can send a quart of base with reducer. Clear coat just grab the ss1210 IMO only around 100 bucks works good
Its color code UA . Thank you for your help .
Okay but where do you get your paint?
Hey Marco. That came out awesome!
Two questions.
1.) When you do a full respray, do you do the door jams first or afterwards? I'd think first right?
2.) What was the colour code on that base coat? I absolutely love that colour!
Keep up the great content 👍
I like gow he gave you a thumbs up.and completely ignored your question lol..wow
Sorry extremely hard to get to all of them. I get hundreds a day
I did not think about that man.. my apologies. That makes perfect sense.
@@Will-fv3uv no it's ok.. It's just so extremely hard to get back to everyone that's why I have fb lives almost every week
@@speedokoterefinishnetwork4937 you are teaching me a lot. I appreciate your videos.
Looks killer, what would this job run parts and labor?
A job like this anywhere you go your looking between 2500-3500 cheap end of the scale
What spray gun is that? And what price you are spraying sealer base and clear?
Amazing results
My brand mark1 eco
I did NOT like that color on that new edge Mustang but the final outcome outside looks really good.
Thank you
🔥🔥🔥🔥
Hey Mark what filters do you use on those fans for the over spray?I seen them on your previous videos
EPA booth filter
Question the primer you used you don't need to sand it before applying color?
My bad is a sealer you spray on
Man u are good
I mean like good
Thanks a lot
which filler did you use on the right rear quarter panel repair ?
Speedokote
Bought a can of basecoat activator and started adding a splash of it to all my paint for a little extra insurance
Do you ever add the activator?
Do you think it makes a difference in the paintjob?
Yea it helps durability
if only i had a garage i would paint my car myself... :(
Hey Bro , I’m a new Subscriber . I love your work . I have a 01 Cobra . Needs some paint work , nothing crazy . Where are you located ? I’m not sure if you have different level paint jobs because I’m just starting to watch your Vids but I am Highly Highly interested. I need your shop info ( location etc..)
I'm in pa, to save us both some time it might help if you stop by a local body shop for a free quote before coming to me. That way you can compare prices
@@speedokoterefinishnetwork4937 ok , I’m not far from you . I’m in Maryland. I will check a local bodyshop but if I come to you how do I get in contact with you ?
@@DHeagleBBQ cash2kcars@gmail.com
@@speedokoterefinishnetwork4937 I will shoot you a email this week . We have 3 Mustangs ( 2 GTs and a 01 svt cobra ) that could use your expertise Lol
So how much is something like this for a start to finish with all of the sanding, etc.?
You will pay just about any shop across the country 2500-4500 minimum . And that's a cheap job
Nice
Thanks!
It would be nice to do a head to head ACME and Speedokote
That was a junk pile, awesome job man! I know how difficult that color can be spraying without mottling, turned out amazing. Curious how many hours you had into this project?
What color is this?
How long does it usually take you to complete a car from start to finish
1-3 weeks all depends
@@speedokoterefinishnetwork4937 okay same here. Just making sure I’m working at a decent pace
Sucks the cheap paint made life difficult but I love the color. I know the guys that throw down some heavy/big flake will hit it with a wet sand before they put on their final layers of clear. More work but I guess if you just had sand paper and not alot of clear that would get it done lol
How many gallons of paint it normally takes
1 gallon of base at most, 1 gallon of clear coat
@@speedokoterefinishnetwork4937 thanks my guy
Interesting getting paint job on my vehicle what state you located at
Pa . Please understand before contacting me these prices listed on these videos are for DIY reference only .
$400 Wow! Where are you located? Sign me up. My 01 GT needs a paint job.
Read disclaimer.
What is the that color name and code?
Not a fan of the blue-greens but it looks 300% better bro!! 🍻 🇺🇸
Thanks!
Do you have flat 2k clear
Yeas, a mustang finally ! p.s.: Marco please turn the selfie camera mirror off.... everything is backwards.
do my car next :)))
Hey bro, where you located at? & do have another to way of communication?
Cash2kcars@gmail.com
can you paint my mustang?
the clear completely failed and most spots are faded and its peeling
Yea I could get it done
@@speedokoterefinishnetwork4937
how I can contact you and talk details.
@@jdmjunk cash2kcars@gmail.com
No paint inside Doors?
Where are you located at in PA?
Cash2kcars@gmail.com
Hi, where can i contact you about the product sponsorship?
Cash2kcars@gmail.com
where did that blowup paint booth go ??
Please put in a comma!?
400$ paint, job
Good paint. Bad metal and body work
You always do great work but horrible color choice on this one
Orange peel ota
Ota?
💯 pr໐๓໐Ş๓
That rear arch looks terrible…
Thank you, I feel like a much more educated human now.
Dude you have alot of awesome comments but waste your time with this troll . You rock dude dont waste your time with haters.
@@eduardoceja8405 that rear arch is fuct...
@@zero_to_1000 _Dude you joined YT 14 years ago get a job and stop trolling old man 😂🤡_