@@itsamedaniil5976this is the first tutorial I saw without lubing the switches. Did you lube your keyboard, plus how is it holding up? I have access to the foam and tape, is it worth it modding the keyboard with only those two
@@willy7968 it will make your keyboard sound so much better you should definitely do it . but try doing 2 or 3 layers of tape, also keep in mind that the foam will reduce brightness of the rgb.
@@fatiqraza514 oh thank you so much I really appreciate, I don’t think I want to lose the brightness of the keyboard now, will definitely do it in the future
thank you so much for the tutorial, I just finished doing this in my gk61 with gateron yelows as my first bigger keyboard mod and a couple things went wrong but its fine. I did a before and after sound test and it's so much better now
Just modded my keyboard like this yesterday and you're right. Although I used pva foam and it looks so good when I cut it really well, it looked like it was factory made. I also applied 2 layers of tape as people said 1 was ok but not quite enough.
with the music and the editing, i felt like i was watching one of those toys videos my little cousins watch, and i realized this is the equivalent of those silly toy videos and kids videos
Love the vid, but I find with the tape mod it often works better and gives a deeper thock with more layers of tape I did it on my Rk61 and it sounds much better and I used 3 layers of tape thats all you really need but you could probably add more if wanted.
Yeah for sure! From my experience, it made every switch sound similar so for the 2 boards that I tape modded, 1 layer is enough to preserve some switch personality haha
Tape mod is fucking trash. It doesn't "give a deeper thock" is just makes the keyboard sound waterlogged. It sounds like you chucked your keyboard in saltwater and then took it out and started typing. Godawful mod.
I think 2 or even one layers are enough, having more eliminates the sound u originally look for with tapes, which is the vibration of the bubbles of air between the pcb and the tape aswell as the tape itself, think of the tape as a really wide string or stretched cloth, when plucked it makes that poppy noise
for anyone who still wants to do this but cant find pe foam, tissues work great. Just make sure you get clean tissues with no moisture (i would wash hands, sanitise and dry) and then just lay the tissues in as flat as possible, as many layers as you would like just so you can fit the PCB back in, and it works just the same.
Great video. I'll try it on my keychron next weekend, wish me luck. First MK and first modding experience, hope i get it done. Thank you for the tutorial, thumbs up!
Should check out silicone pour too. I ordered a Q1 also and am planning both mods but also a thin layer of silicone to reduce the hollow aluminum sound.
Thanks for the help! My keyboard sounds really nice now. But I had a bit of a problem because I use a different one and it was the positioning of the stabilizers and then I realised I didn't need to poke the holes but anyways thanks!!!
The tape my be conducting electricity somewhere or if you take the tape off and it still don’t come back on then you probably got static in it and killed the leds so try using electrical grade tape and if that don’t work than you fucked up
Great tutorial. However, I don't know if this will work on optical boards. I just tried it on my Tofu 60 with optical tangerines. And now it won't turn on.
so apparently i have a razer Blackwidow 2019 and it does not sounds bad at stock it actually performed really well yet i soon get bored of the clacc sound afterward and so i search up how to make a clicky keyboard thocc and yet i do what you did in the vid, its just that i actually accidentally apply 2 layers of foam making 1cm thicc and yet i have to use a plier just to have the shroud back onto the keybaord and now it just sound like a diy keyboard! I just wanna say that this video changed the way i live with my keyboard! great content bro
I'd use a thicker piece of foam than that in the video, usually the foam that comes from packaging tomatoes, you can get some from your grocery store or restaurant when they're throwing it out; one layer for the face and 3 for the back (one will be taped down to the base of the case with double side tape); then I'll tape the same foam inside the space bar, shift, and enter keys; now the keyboard makes a nice quiet thocking noise .... but it's nothing compare to the Logitech k70 (the first batch that came out, not the later batches that came out years later) that was near silent, it only got squeeky after 13 years of use, and the plastic became to brittle to risk taking the keys off and lubing the sisscor switches. .
Is tape mod safe? I just dive in this keyboard moding world, so do u recommend to do it ? I just add the pe foam to my keyboard and its already sound more marbly, im about to do the tape mod but its kinda risky right? What do u think ? Lov your vid btw ❤
if you are not careful, you may break the switch or the connection connector (for example)but otherwise you just need a keyboard with the ability to change switches, otherwise everything that the author of the video has done is safe to do
I modded mine, took hours and the result was great, but the foam might be too thick because I have to press extra hard on some switches to get to working again, and messed up the alignment a few stabs too when unscrewing, and when I’m done the rbg stopped working, gonna have to open it up again sometime to get it fixed
@@草っているる花 idk if thisd help but push your switches and plate together the pins might not be touching pcb, if that doesnt work switches are bent probably
@@leo._.vincent lmao mine wasnt even proper foam just some paper shit that i found and was still too thick so i had to only put like one small piece in a part of the case that dips slightly lower :D i also just lubed my stabs and doesnt make a big difference
So, i've got the Yunzii KC68 Pro keyboard (which is a rebrand of some other brand i don't really remember). Anyways, it has a pretty thick foam thing pre-installed between the PCB and the plate... so i'm unsure if this mod is needed. I really wanna get the sound you get when doing these mods but again, my keyboard already has some kind of foam pre-installed and i have no idea what that foam even is for.
I'm planning to build my 1st moded keyboard. Is this recommended as well if your keyboard has a battery in it or this is only suitable for wired keyboard type? I will N75 pro keyboard. Then for the keys, planning to use akko purple lavender pro, I want to achieve a thock sound as much as possible. Any recommendations will be greatly appreciated. ❤
If im not wrong, the N75 pro has a thick layer of silicon at the bottom, which will separate the PCB from the battery. If so, you can do all of these mods without worrying your keyboard catch fire. The Akko lavender is great, or you can try the piano one if like linear.
Love the video! Im just wondering im new fo the modding scene and i have a wired full size mechanical keyboard , would these mods couse any shorts or hazzards? My case sound really hollow :)
It could if you use conductive materials. Im sure there are methods of checking if it is on youtube :) Ps: I didn't check the PE foam I used and its worked on all 3 keyboards
I’m still getting into mech boards and sorry if this is a stupid question but what keyboard cable is that? I’ve seen other vids of the 67 lite and the cable is diff. Is that cable custom or sumn? Oh and dope video bro this helped heaps
Hey brother, the cable I have is a custom made from a DYI kit purchsed from custom KBD. I bought the white sleeving from Aliexpress to ge the white look. Hope that helps :)
Can i have some advice from u ? I just bought a beautiful mod( pc75b plus) from akko, but my J button doesnt work, do you have any software or anytips for me that i can fix it ? I just opened it and that switch doesnt work, peace
Search up keyboard tester on google and test your J button. If that doesn't work try plug in a different switch. If a different switch doesnt work, try using a tweazer or paper clip and contact the holes where the switch pins go in. If that doesn' work, your hotswap socket might be defected. Just have a look around the socket and see if there is anything burnt or loose. Its a bit hard to trouble shoot over text but I hope this helps you
@@killakeyboards1945 thank you so much for replying and i just got into the hobby i wanted to ask you can i use krytox205g0 to lube the springs to save money and i have time or should i just get a oil based and bag lube them?
I feel like in such tape mod videos people should be recommending the right type of tape. If you buy the wrong type of masking tape you will absolutely destroy/fry your board. You need one that's not conductive. And unfortunately there is very, very little information about which ones are and aren't conductive. I want to do the tape mod on all my boards. But I'm not sure what tape to use. And even hipyo uses tape that's slightly conductive and might ruin your board. Something that he keeps telling people while he keeps using the same tape.
great video, I was wondering though would it work if you put foam below the pcb, instead of putting tape there ? my keyboard sounds quite metallic, i'm guessing because there is some empty space in it, so i was wondering how something like that might work, or would the tape just be better? thank you
yep, people use to use PE foam as case foam also. Although it might not be the best material, its better than nothing. Perhaps look into using poly fill
The difference between masking tape and painters tape is painters tape can easily come off but masking tape sticks a lot and is harder to remove if I I so this I might use painters tape because if I don’t like it can be removed easily
PE foam MOD alone makes those marbly sounds , ( like the spray can shaking motion makes ) that is the sound I love.
that's probably the best example of how "marbly" sounds. Im actually surprised no one has made that analogy yet.
I'll never unhear it now lmao but this is exactly what I want too. Gonna try to get a super thock spray can shaking sound haha
spray can shaking, posca markers or those sharpie markers... mMmM
I can tell you are Vietnamese by this quote "Oh man, that's sound so good, how do you do"
hehehe
@@killakeyboards1945 lol
lol, that nice
Ae VN ở mọi nơi 💪
@Phan Lê Bình Minh 12A13 THPT MĐC indeed
I just finished modding mine and its sooooooo good, very simple explanation!
Great to hear!
underrated channel this was such a good video! really appreciate the excellent sound tests and easy to follow instructions
Killer video. As far as tutorials go this is one of the best I've seen in the space.
That motivates me more to make tutorials. Thanks for the kind words!
Т
I just finished building my first keyboard. Thank you so much for the tutorial it made my custom sound SO much better!
I'm not sure if you did the tape mod from other videos but layering it three time gives the best results
@@Willy_Gee I did
@@itsamedaniil5976this is the first tutorial I saw without lubing the switches. Did you lube your keyboard, plus how is it holding up?
I have access to the foam and tape, is it worth it modding the keyboard with only those two
@@willy7968 it will make your keyboard sound so much better you should definitely do it . but try doing 2 or 3 layers of tape, also keep in mind that the foam will reduce brightness of the rgb.
@@fatiqraza514 oh thank you so much
I really appreciate, I don’t think I want to lose the brightness of the keyboard now, will definitely do it in the future
Diggin' the upbeat music in the background. A nice change to the usual soft jazz I hear (not hate on those videos btw, just a comment).
thank you so much for the tutorial, I just finished doing this in my gk61 with gateron yelows as my first bigger keyboard mod and a couple things went wrong but its fine. I did a before and after sound test and it's so much better now
Im glad the mods worked! Link me the video
@@killakeyboards1945 the video is very scuffed, bad and on my other channel :P ruclips.net/video/AGZVa0LBdlU/видео.html
@@killakeyboards1945 what switches are those? I am using Akko Rose Reds but I want mine to sound like yours
@@minimule4582 lube
is yours optical or mechanical? I have the optical version but idk if I can also do it lol
Thank you! I did this on a RK61 and it sounds much better.
Thanks for sharing!
@@killakeyboards1945 what is the filmof the kbd67 lite
Just modded my keyboard like this yesterday and you're right. Although I used pva foam and it looks so good when I cut it really well, it looked like it was factory made. I also applied 2 layers of tape as people said 1 was ok but not quite enough.
just tried this on my gk 64 with ktt roses. went from delicately quiet to fairly loud in the nicest way possible
thats what I like to hear
thats what you call poppy
@@killakeyboards1945hey, can you please share the link for that desk mat?
Love how it sounds seller and thockier after the mod. Also appreciate the lengthy typing recordings with words screen. Thank you for showing us. ❤
with the music and the editing, i felt like i was watching one of those toys videos my little cousins watch, and i realized this is the equivalent of those silly toy videos and kids videos
For having no mods on it, that's the best fucking keyboard I've ever heard.
Congratulations: It sounds exactly the same!
it does not
I knew it! I didn't do the pe foam mod correctly my stabs still sound bad thanks alot for this tutorial
Man, I did this to my Keychron K2 and it made a huge difference.
Did you ever have any problems with static?
Subscribed. This channel's so underrated, geez.
Love the vid, but I find with the tape mod it often works better and gives a deeper thock with more layers of tape I did it on my Rk61 and it sounds much better and I used 3 layers of tape thats all you really need but you could probably add more if wanted.
Yeah for sure! From my experience, it made every switch sound similar so for the 2 boards that I tape modded, 1 layer is enough to preserve some switch personality haha
dam it i added 2 layers of tape only
Tape mod is fucking trash. It doesn't "give a deeper thock" is just makes the keyboard sound waterlogged. It sounds like you chucked your keyboard in saltwater and then took it out and started typing. Godawful mod.
I think 2 or even one layers are enough, having more eliminates the sound u originally look for with tapes, which is the vibration of the bubbles of air between the pcb and the tape aswell as the tape itself, think of the tape as a really wide string or stretched cloth, when plucked it makes that poppy noise
Add more? XD hahahah
Thank you so much! I did this on a GK61 and it sounds so much better.
for anyone who still wants to do this but cant find pe foam, tissues work great. Just make sure you get clean tissues with no moisture (i would wash hands, sanitise and dry) and then just lay the tissues in as flat as possible, as many layers as you would like just so you can fit the PCB back in, and it works just the same.
yes!
Great video. I'll try it on my keychron next weekend, wish me luck. First MK and first modding experience, hope i get it done. Thank you for the tutorial, thumbs up!
Let me know how much difference it made! goodluck
Should check out silicone pour too. I ordered a Q1 also and am planning both mods but also a thin layer of silicone to reduce the hollow aluminum sound.
@@SmartFool24 Yeah I passed up on Q1 because of the hollowness
@@killakeyboards1945 I think it can be modded out somehow at least I’ll have fun trying to anyways lol
I love the music! haha
Great video. Very clear and easy to watch. I'm going to try the PE foam!
Thanks for the help! My keyboard sounds really nice now. But I had a bit of a problem because I use a different one and it was the positioning of the stabilizers and then I realised I didn't need to poke the holes but anyways thanks!!!
“you can get some at your local Bunnings”
gday fellow aussie
YEAHH NAHHH MATEEE :D
half of my keyboard stopped lighting up 😭😭
The tape my be conducting electricity somewhere or if you take the tape off and it still don’t come back on then you probably got static in it and killed the leds so try using electrical grade tape and if that don’t work than you fucked up
😂
The RGB LEDs on like 2 or 3 keys were malfunction after the tape mod ,I fixed it by resetting the keyboard
Ahahahah, congratulations! Another "happy" ovner of mechanical keyboard 🤣
I bet you ordered a new one in the past of 5 months 😂
really well put together, respect.
Bro I love your accent, it went from Asian ( I think don't flame me if I'm wrong) to Australian, and a little bit of American.
good quality will be watching more of this channel
man the difference is unnoticeable, your keyboard sounds like thunder
I love your accent, great video too! Saving this for when I open up my keyboard for new switches and keycaps.
To skip all the talking for sound comparison:
Before: 6:44
After: 8:05
the quality is super good! keep up the work
That mousepad looks pretty cool. Where did you order it from?
From dailyclack!
@@killakeyboards1945 Awesome, thanks!
@@killakeyboards1945 do you know the name of the deskmat
i did tape mod on my keychron q1 yesterday, removed it today and it sounds much better. you only need PE foam!
Thanks for sharing!
how did you make that hologram type thing when you did the typing test?
Thank you, very helpful! 👍What mod mat are you using on your desktop?
Clear and helpful video, thanks 👍
I used a thin and sort of elastic anti-static bag from a motherboard box and it sounded amazing lmao
Great tutorial. However, I don't know if this will work on optical boards. I just tried it on my Tofu 60 with optical tangerines. And now it won't turn on.
Thanks for sharing
The board may have been too high in the case which means the usb c port wasn’t functioning. Could also be hat you may have used a conducting tape.
You can trace the PE foam using the switch plate.
Woww. This sound relieves my pain when my biscuit falls into the tea😌😌
so apparently i have a razer Blackwidow 2019 and it does not sounds bad at stock it actually performed really well yet i soon get bored of the clacc sound afterward and so i search up how to make a clicky keyboard thocc and yet i do what you did in the vid, its just that i actually accidentally apply 2 layers of foam making 1cm thicc and yet i have to use a plier just to have the shroud back onto the keybaord and now it just sound like a diy keyboard! I just wanna say that this video changed the way i live with my keyboard! great content bro
Im glad to hear that, thanks for watching!
can you pls name the mousepad it really cool like this video :)
This guy seems like somebody that would a thousands of subs.
thanks to your guide. i`m planning to enter into world of keyboard mod.
I'd use a thicker piece of foam than that in the video, usually the foam that comes from packaging tomatoes, you can get some from your grocery store or restaurant when they're throwing it out; one layer for the face and 3 for the back (one will be taped down to the base of the case with double side tape); then I'll tape the same foam inside the space bar, shift, and enter keys; now the keyboard makes a nice quiet thocking noise .... but it's nothing compare to the Logitech k70 (the first batch that came out, not the later batches that came out years later) that was near silent, it only got squeeky after 13 years of use, and the plastic became to brittle to risk taking the keys off and lubing the sisscor switches. .
if your using wirelesss keyboard i recomend opting for electrical tape instead of masking tape to reduce the risk of zapping your pcb
The foam goes over top of the stabilizer bar? Other videos I’ve seen they tuck the foam underneath of them.
Is tape mod safe? I just dive in this keyboard moding world, so do u recommend to do it ? I just add the pe foam to my keyboard and its already sound more marbly, im about to do the tape mod but its kinda risky right? What do u think ? Lov your vid btw ❤
if you are not careful, you may break the switch or the connection connector (for example)but otherwise you just need a keyboard with the ability to change switches, otherwise everything that the author of the video has done is safe to do
I modded mine, took hours and the result was great, but the foam might be too thick because I have to press extra hard on some switches to get to working again, and messed up the alignment a few stabs too when unscrewing, and when I’m done the rbg stopped working, gonna have to open it up again sometime to get it fixed
perhaps the issue for the RGB having stopped working is because the PE foam has anti-static properties. did you ever resolve this issue?
Same with the extrra-force on certain keys, did you fix it anyhow? it would be of help to know.
@@lylacfps it just fixed itself lo
@@草っているる花 idk if thisd help but push your switches and plate together the pins might not be touching pcb, if that doesnt work switches are bent probably
i only did the tape mod and my keyboard sounds way better and it feels way sturdier as well thank you so much
oh man the sounds so goood. How do you do
Your mouse pad Is fantastic, where I cam find that?
I don’t deserve watching this video, the sounds are too good for me.
Just did the most painful tape and "foam" mod on my ducky one 2 mini, and it was more difficult than it should have been.
I did it on my Anne pro 2 and it's so botched lol I eyeballed the foam
@@leo._.vincent lmao mine wasnt even proper foam just some paper shit that i found and was still too thick so i had to only put like one small piece in a part of the case that dips slightly lower :D i also just lubed my stabs and doesnt make a big difference
very good totorial!!!👍
And about the static electricity caused by the foam, couldn't damage the PCB?
Nice video, my man.
Just one question: what deskmat is that?
CYBERPNK - Black
@@killakeyboards1945 Do you know who is the fabricant? Couldn't find with this name
What is that black keayboard mat? It's beautiful 🤩
Oh sheeet, thank yu man. I've moded my keyboard with pe foam but I didn't cut a piece below stab and it sound like wtf, I will try it now
Where did you get that dope desk mat from?
I loved the nk65 purple keycaps, is it posible to get them like separately?
6:05 what the name this programm?
So, i've got the Yunzii KC68 Pro keyboard (which is a rebrand of some other brand i don't really remember).
Anyways, it has a pretty thick foam thing pre-installed between the PCB and the plate... so i'm unsure if this mod is needed.
I really wanna get the sound you get when doing these mods but again, my keyboard already has some kind of foam pre-installed and i have no idea what that foam even is for.
bunnings was mentioned
Nice tutorial bro!
Thank you!
on a sidenote i really like your deskmat, is there a link to it? 😂
Hiiiiii may i ask for the link of the keycaps and do they have 1 for 84layout? thanks ❤
so nice to have aussie doing contents from time to time
Hey man im wondering how to do the PE foam mod with plate mounted stabs, could you show me
Hey what kind on key switches do you use? They sound so good and the mod you did sounds awesome!!
how did this affect your LED’s ? light is really important, did you make holes for the led’s too ?
That's optional imo. You can , but it takes a lot of time
My led just reduces brightness like 5 10% so it doesn't matter for me
I feel the tape mod like chokes out the PE foam imo but idk maybe use like 2 layers of tape
I'm planning to build my 1st moded keyboard. Is this recommended as well if your keyboard has a battery in it or this is only suitable for wired keyboard type? I will N75 pro keyboard. Then for the keys, planning to use akko purple lavender pro, I want to achieve a thock sound as much as possible. Any recommendations will be greatly appreciated. ❤
If im not wrong, the N75 pro has a thick layer of silicon at the bottom, which will separate the PCB from the battery. If so, you can do all of these mods without worrying your keyboard catch fire. The Akko lavender is great, or you can try the piano one if like linear.
great vid! once you have added the tape what do you do? is it just poking holes for the switch holes?
I wonder how this mod will end on a blue switch. my keyboard is old and they sound more like a brown than the blues they were brand new
Lube it...
Love the video! Im just wondering im new fo the modding scene and i have a wired full size mechanical keyboard , would these mods couse any shorts or hazzards? My case sound really hollow :)
It could if you use conductive materials. Im sure there are methods of checking if it is on youtube :) Ps: I didn't check the PE foam I used and its worked on all 3 keyboards
This the first time I will try to mod a keyboard, wish me luck.
i just added the tape and used poly fill and it sound *AMAZING* (clacky too!)
I don't understand, is this to make your kb sound poppier(louder) or quiter? I wanna make mind less clicky
I’m still getting into mech boards and sorry if this is a stupid question but what keyboard cable is that? I’ve seen other vids of the 67 lite and the cable is diff. Is that cable custom or sumn? Oh and dope video bro this helped heaps
Hey brother, the cable I have is a custom made from a DYI kit purchsed from custom KBD. I bought the white sleeving from Aliexpress to ge the white look. Hope that helps :)
Can i have some advice from u ? I just bought a beautiful mod( pc75b plus) from akko, but my J button doesnt work, do you have any software or anytips for me that i can fix it ? I just opened it and that switch doesnt work, peace
get a new switch ig
Search up keyboard tester on google and test your J button. If that doesn't work try plug in a different switch. If a different switch doesnt work, try using a tweazer or paper clip and contact the holes where the switch pins go in. If that doesn' work, your hotswap socket might be defected. Just have a look around the socket and see if there is anything burnt or loose. Its a bit hard to trouble shoot over text but I hope this helps you
hello Killa can u tell me what is the film of the KBD67 lite? thank u
KBD67lite this is the r3 ?
This is r2!
@@killakeyboards1945 thank you so much for replying and i just got into the hobby i wanted to ask you can i use krytox205g0 to lube the springs to save money and i have time or should i just get a oil based and bag lube them?
Love the mousepad, where can I get one like this?
Is there significant changes in the led light? Since the pe foam can cover the led light? Planning to mod my keyboard this way
With the KBD67 lite, it is slightly dimmer but still visible
btw you can use non-static pe foam so you dont run the risk of getting a shock. haven't tried it out myself yet. idk tho
hey is your keycaps compatible with redragon fizz k617?
Thank you my mechsnical keyvoard sounds good and btw what is the name of your keycap?
GMK Red Samurai
I feel like in such tape mod videos people should be recommending the right type of tape. If you buy the wrong type of masking tape you will absolutely destroy/fry your board. You need one that's not conductive. And unfortunately there is very, very little information about which ones are and aren't conductive. I want to do the tape mod on all my boards. But I'm not sure what tape to use. And even hipyo uses tape that's slightly conductive and might ruin your board. Something that he keeps telling people while he keeps using the same tape.
have u found the right tape yet cause im thinking of tapeing and using pe foam
can u use masking tape/painters tape for wireless keyboards or should u use electric tape?
great video, I was wondering though would it work if you put foam below the pcb, instead of putting tape there ? my keyboard sounds quite metallic, i'm guessing because there is some empty space in it, so i was wondering how something like that might work, or would the tape just be better? thank you
yep, people use to use PE foam as case foam also. Although it might not be the best material, its better than nothing. Perhaps look into using poly fill
@@killakeyboards1945 thanks, will look into it
any reason why you used a red ballpen instead of black when tracing? just kidding mate! good stuff! I am trying this to my keyboard soon
What mousepad do you have or from where
Is that Orochimaru in the left-hand corner at 6:21?
Yessir
Love the bgm music
The difference between masking tape and painters tape is painters tape can easily come off but masking tape sticks a lot and is harder to remove if I I so this I might use painters tape because if I don’t like it can be removed easily
How did you manage to make the PE foam mod? My switches are not working properly if I try to do that on my kbd67 lite r3
See if your switches have penetrated through the pe foam when inserting them in. They're more likely to bend if you don't have it straight
What do you think about doing these mods and paper mod on my th80 pro with gateron baby kangaroos?
what’s your deskmat? looks noice
Thanks! Its the CYBRPNK - black from dailyclack