After 2 hours of modding, I just realised that the lights are barely visible. Thanks to the RED eva foam that I used as the pcb foam. BROOO IM CRYING RN. I have no energy to take it apart again. Guess no lights will be fine.
Youve gotta make cutouts ,you dont have to dissasemble it foam is easily rippable even with fingers,just small portion needs to be removed for diode to be seen
you dont need to take of the switches to tapemod the keyboard jsut make sure you use masking tape or painters tape and make sure to squeeze out all of the air you can get
yes you kinda need a hotswappable keyboard keyboard or not you have to desolder it and resolder it again, you can just use tape mod, in my opinion 3 layers of tape is the best for thock, if it is too thocky put less tape, ( for me after 3 layers there is no difference) and you can put foam on your keyboards case
Waiting for my keyboard to arrive, gotta try and do this soon.
nice!
After 2 hours of modding, I just realised that the lights are barely visible. Thanks to the RED eva foam that I used as the pcb foam. BROOO IM CRYING RN. I have no energy to take it apart again. Guess no lights will be fine.
Youve gotta make cutouts ,you dont have to dissasemble it foam is easily rippable even with fingers,just small portion needs to be removed for diode to be seen
Really enjoy watching your videos ❤️🥰
thank you!
Hello Sir, I'm new to modding, is there any tips or video po kayo ma e suggest po esp. sa mga need na tools and materials? hehe
working on it! hehe saktong sakto to
Love your vids!
Which tape should i buy? Painter's or electric's
painters!! dont use electric it'll ruin your pcb
Keep it up 🙏
Thank you!
Kailangan pa po bang mag cut out ng space para sa stabilizers? Or no need na po? Using plate mounted din kagaya ng nasa video.
mas okay mag cut out bro para di mag stick yung lube sa foams
Can I also do this in my GG68?
what 's faom do you use to dampening under PCB? and How thick? 2mm?
and how thick PE foam on PCB? 1mm?
@@shineshineshineshineshineit should be at least 5mm in order to dampen the soun
@@odakuydu9067 okay thx!
pd b ung PE foam na ginamit pambalot don sa KB na nabili?
Can I use PE foam mode and add EVA foam on the PCB? Is it useless to do this?
Yesss!
mas thockier ba if pe foam lang or with pefoam and platefoam?
Sure po ako sa pe foam ilalagay sa pinakailalim po, check mo po sa yt Yung thickness of pe foam for mech keyboard para sa comparison.
0.5 mm po ba yung pe foam?
how did this affect your LED lights ? is it still visible ?
Yes, still visible.
its still visible but its a bit dimmer
Make a tutorial sir for newbie pano gawin yan
sure!
@@rigsphV2 Will wait for that sir 🥹
do you have to take out all the switches in order to put tape mod? I noticed that in rk61 you don't have to
he didnt remove the switches for the tape mod, he did it for the pe foam mod in the middle of plate and pcb
Are you holed just through the PE foam or through Tape too?
you dont need to take of the switches to tapemod the keyboard jsut make sure you use masking tape or painters tape and make sure to squeeze out all of the air you can get
Boss pwede ba toh sa kahit anong mechanical keyboard? Yung aken kase is Redragon fizz k617 red switches.
pedee bro!
@@rigsphV2 Need pa ba ng lube kahit may ganyan na sir?
do you need a hotswappable keyboard or do you have to desolder it and also i have pe foam only, do i need the other stuff?
hotswappable is easier, idk about soldered switches tho
yes you kinda need a hotswappable keyboard keyboard or not you have to desolder it and resolder it again, you can just use tape mod, in my opinion 3 layers of tape is the best for thock, if it is too thocky put less tape, ( for me after 3 layers there is no difference) and you can put foam on your keyboards case
can i still change switch after I taped mode my keeb?
yes
What is the recommended tape for keebs with rgb?
Doesnt matter
what did you use to poke hole?
its hard to poke holes with a toothpick
did you poke only the middle part?
he has geteron without pins i think so he made only middle hole
Napa punta ako dito dahil sa tiktok vids mo sir sana manalo
WOOOP WOPP LEZGO!
(2)
nice vid btw. new subscriber here.
how thick is the PE foam?
0.5 mm
The Eva foam 1mm
@@DwayneOsu can we use 5mm it will sound thicker?
@@DawarKhan01 5mm ?? way too thick
@@DawarKhan01 measure the gap between the plate and pcb and purchase the thickness necessary to fill the gap.
pwede po ba bulak? alternative for eva foam?
oo pwede polyfill rin galing sa pillow pwede rin and na try ko na it has a deeper sound