Hope your having a great time at the make and take. To solve your problem with lining up you can put a dot or mark where want your whole centered and punch. It would be difficult with the 1/16.
I wasn't aware of your Product Parade, but I sure am now. & I will visit.....I love this tool, don't have it yet, but its on my list, maybe sooner than later. TYFS
I punched some felt recently for a project, just using normal circle punches, and sandwiched the felt between two pieces of copy paper. It punched brilliantly. Without the paper I’d have been in danger of jamming the punch.
Hey, crafters, Maymay's Product Parade is a great channel for us! She demonstrates so many helpful and practical tips that many of us haven't thought of using in our projects. Try it out and see!
Thanks for this demo Maymay, I've been waiting for this to be released for the last couple of months but after seeing your demo I realize I don't need this. I have numerous hole-punching tools but what I love about my cropadile is the ability to set eyelets and grommets. It doesn't look like the multi-punch has that capability.
Thank you SO much for this review! I’ve needed a good hole punch and was holding off buying until you addressed this tool. BTW, I’m subscribed to Product Parade, too! 😍
Thx 4 this review, a question, perhaps it would work on the ribbons if you hold one side of the ribbon with 2 fingers and the other end with 2 other fingers and kinda stretch the ribbon, sometimes it does work like that, or do the same thing, but put a layering cardstock piecbehind the ribben and cut both... I bet that it will work much better.
Are you supposed to put the paper in the very top, match it to the line and mark the depth, then move it to the punch and slide it to the mark you made to get the depth?
I thought I was watching Product Parade. Peeps, if you like this, you need to subscribe to Product Parade! Great review, Maymay. Thanks. I love to see things demonstrated before I buy and break them. 😂😂😂 Hugs and blessings
It looks very heavy and bulky in the front.Why is it so thick under the hole area? It's not like it's a cup to hold all of the punched out hole bits. And it can't punch through any of the ribbon she tried. It looks like over priced junk to me. 🤔
It is bulky, but takes up much less space than buying separate tools for each size. I have it and love it. Like Maymay said, it cuts through everything like butter!
Thanks Maymay! Hope you are having a fabulous Open House today. Loved seeing Judi on your video this morning. I enjoy your Product Parade channel.
Hope your having a great time at the make and take.
To solve your problem with lining up you can put a dot or mark where want your whole centered and punch. It would be difficult with the 1/16.
I wasn't aware of your Product Parade, but I sure am now. & I will visit.....I love this tool, don't have it yet, but its on my list, maybe sooner than later. TYFS
I punched some felt recently for a project, just using normal circle punches, and sandwiched the felt between two pieces of copy paper. It punched brilliantly. Without the paper I’d have been in danger of jamming the punch.
Yep that is a great 👍 idea too
Didn`t know you had a product channel ! So good to know, thank you !
Hey, crafters, Maymay's Product Parade is a great channel for us! She demonstrates so many helpful and practical tips that many of us haven't thought of using in our projects. Try it out and see!
Thanks for previewing this !!!! I think it's a must have !!!!!!
Thank you MayMay. I did not know about your other channel! I went over and subscribed right away!
Thanks for video! Really helpful
I did not know about your product parade. Now that I’m aware I have subscribed. Thank you.
I love this! How awesome to have several size hole punches in 1 tool.
Thank you for the review on this product. Appears to be a wonderful tool, although I have the same concern about depth of an item.
What if you need to line up the holes next to each other? Can you see the first hole when punching the 2nd hole?
I need to buy this. It will make it so easy to make the holes for eyelets in my recipe albums. Thank you for showing this product.
Very cool! I have not seen that one yet here in our Michaels. Thank you for sharing
I just found this week. I was looking to see if you had reviewed it. Thank you
I order this cant wait to get it. thanks Maymay
Thanks for the video but I want to only buy one, so I am trying to figure out which one would do the most for me.
Thanks for this demo Maymay, I've been waiting for this to be released for the last couple of months but after seeing your demo I realize I don't need this. I have numerous hole-punching tools but what I love about my cropadile is the ability to set eyelets and grommets. It doesn't look like the multi-punch has that capability.
Hey if you mark your material to punch where you want to you can center it more easily been lining up a measurement on the machine
I follow on the product parade!!
It’s so funny because I just thought this was product parade because of thumbnail! Lol thank you Maymay
So glad u did the Not ur Mama’s Cardstock. That was the first thing I was wondering.
I follow Product Parade too!
Awesome, thanks for the review.
Awesome share I have to get one.
Wow, awesome punch. Try thin cardstock with your ribbons. Just sandwich the ribbon between the thin cardstock. Hope this helps! God Bless.
Yep I need this 👍
Could you do a video about different stamp inks and which ones do or don’t work with markers
ruclips.net/video/NA61s_cCmms/видео.html
You could use the biggest three holes closer together to punch out little snowmen on a card.
Thank you SO much for this review! I’ve needed a good hole punch and was holding off buying until you addressed this tool. BTW, I’m subscribed to Product Parade, too! 😍
OMG I need this!! Thank you for sharing
Great test :) This is super helpful. TY so very much.
Maybe if you pull the ribbon taut, it will work. I have this and love it, but haven't tried fabric yet.
Uh oh, another tool I NEED!
Cool tool!!
Thx 4 this review, a question, perhaps it would work on the ribbons if you hold one side of the ribbon with 2 fingers and the other end with 2 other fingers and kinda stretch the ribbon, sometimes it does work like that, or do the same thing, but put a layering cardstock piecbehind the ribben and cut both... I bet that it will work much better.
What chipboard weight do you use for albums ?
Wow I haven’t seen that tool before it’s awesome!!! Tfs I need to get this tool:)
Are you supposed to put the paper in the very top, match it to the line and mark the depth, then move it to the punch and slide it to the mark you made to get the depth?
Try to put the ribbon on a piece of cardstock and I bet it will punch.
Will you be carrying this punch in your store?
I can see this being used to make a solar system card and the different sizes for the planets.
I’m thinking I need this
Is the link for this in the description because I'm not finding it?
Wow this is fantastic and what space saving gadget. Can eliminate all my hand held tools.
I thought I was watching Product Parade. Peeps, if you like this, you need to subscribe to Product Parade! Great review, Maymay. Thanks. I love to see things demonstrated before I buy and break them. 😂😂😂 Hugs and blessings
Would ribbon work better if holding both ends of ribbon?
Would it work on edge of leather for lacing?
How do you clean out the collector
Great product! I'm putting this on my wish list if anyone wants to adopt me. LoL
I didn't know you had a product channel lol
Do you know where I can get a punch to make gift card holders
Like multi use tools.
Hi Maymay. I follow you everywhere! LOL
The problem is it can only go so far on your paper. Maybe an inch up. I have one that can go anywhere on the paper
Let's punch something! 😂
It looks very heavy and bulky in the front.Why is it so thick under the hole area? It's not like it's a cup to hold all of the punched out hole bits. And it can't punch through any of the ribbon she tried. It looks like over priced junk to me. 🤔
Looks to bulky.
It is bulky, but takes up much less space than buying separate tools for each size. I have it and love it. Like Maymay said, it cuts through everything like butter!