I had those tracks on my company truck in 2009 (they still have a picture of my truck on their website). Find you a big parking lot, get it up to about 4th gear, that was on an Eaton 10 speed, and you can cut donuts in your semi!
Brutus is looking pretty tough with tracks but to be top dog he needs front wheel assist. Have you seen the hydraulic front wheel assist system/kits that get his power from your wet kit or some that add a small hydro pump after the transmission?
Blann Tractor from Hampton, Arkansas, beautiful red Pete. The Blann family has been running trucks out of Hampton before I became familiar with them in 1988 when I made a truck parts delivery there. I know of a 1949 F1 that got over-restored by folks that prefer Duesenberg car restorations. The F1 was a hay bale hauler in the Blann family. Anyone can correct me wrong on the exact year of this F1, and I remember the conversation with Big Mr. Blann while watching a tiger in a stock trailer at an indoor car show just down the road from where Little Rock Bass Pro is many years later. I was there for a model car show, plastic model cars, and the Blanns knew me through big truck parts and service business.
We run those on bed trucks in the oilfield! They work well but are hell on the truck, so much strain on everything, chalmers suspension is about the only one that can handle it
@@righttracksystemsint sorry, not complaining about them, the tracks are awesome, I’ve only ever seen one track separate while backing up onto a steel edged rig mat with a 80,000lb pump on the back! but the issues I saw were blowing through bushings and even bending axles, seemed to me that as mud balled up inside it would put added strain on everything and “pull” the axles into each other Now, this was alberta oilfields on rig moves, so 75% of all failures we’re operator abuse, 25% overweight/overloaded We’d hire Titan out of Edson if we ever needed floater support
That seems quite useful for humid areas, I don't know why it is not used. If you have seen videos of truck drivers in Brazil, those wheels would be very useful.
Hey Brutus is looking sick with them tracks on the wheels it's great too see your brother Aaron working for you now are you going too start some work on Blue Collar?
Man get with me when u come to white plains pulls again, I live 20 minuets away and have a single cylinder diesel off a military water pump the mini truck needs
Ok…… I tought the Differentials wheels move independently when each side slips….. same with 2nd axle from 3rd axle….. ill get back to you guys when i figure this out 😬 Because as of right now, i think damage will be occurred…….
The straps are supposed to go behind the rail it’s a rub rail it’s designed to keep your load from being cut loose if something was to hit the side of your trailer
Just put rc brushless motors in kiddos truck an you drive it like an rc car . Bount to be able to get reduction drives for them nowadays .Arron can surely master that conversion .
Ell... Tried the LandFinder App, can't use it from here in Canada unfortunately. I'll give some of my resume here. CDL Licensed since 2016. B-Train experience, Flat deck-Lumber&Steel/Tarping-Currently for 1.5yrs. Northern Ontario Canada 🇨🇦, Winter/Spring/Summer/Fall-Logging. And yes we have "Black-Earth" bottomless mud holes in the swamps too, 😂😅. Ice road haulage, etc. 2002-2016 Was an Underground Development Miner and equipment operator, Canada wide Blasting Certification, Ontario Mine Rescue Certification. Want to get the hell outta Canada and away from Justin Turdeau. Current employer is "OK"! But need a change since being recently divorced. Kids are all grown-up and gone. I'm free!! And want the most I can get out of life.
Damn, yall cant hit up bucees on these long road trips can ya? No trucks allowed. Nowhere better to stop for a sausage on a stick and a colossal chicken burrito, and a shit.
I had those tracks on my company truck in 2009 (they still have a picture of my truck on their website). Find you a big parking lot, get it up to about 4th gear, that was on an Eaton 10 speed, and you can cut donuts in your semi!
That thing is truely amazing! A 10 ton "half-track"!!!....a thing of beauty!!!!
I passed you on the way back down on the interstate coming back from truck. Saw truck looks so much better in person than it does on video
Really amazing country artist that I’ve grown up listening to.
Tracks on a semi so effin deadly 👍
the lifted icon is grate and i love they come stock like that we have one.
Sarge's engine sound is wonderful and that paint work my friend, wow very nice,Godspeed
When you convert the mini cab over u should get a trailer to haul people or other things like a cooler
Good to see family doing good! Nothing like having a safe day
You should have it to where smoke comes out of the stacks 💨💨💨
The track ideal is outstanding!
That is wicked to see tracks on a Peter Bilt. I look forward to seeing more of that Semi. Awesome 👍
Brutus is looking pretty tough with tracks but to be top dog he needs front wheel assist.
Have you seen the hydraulic front wheel assist system/kits that get his power from your wet kit or some that add a small hydro pump after the transmission?
Cool Video! 9:35 see Semi Track on Pavement clicking along at low speed.
I like it. Really good track
I bet those tracks would be bad a** in the snow. (Yeah, i know, Florida doesn't get any, but im just sayin) It's a HALF TRACK! 😎
That blue cab over was from a company here in California, DIRKSEN transportation, I used to drive for them. 57’ trailers
Gunner. Is cool just like his dad you rock buddy’s and nice truck😮😢😅😊❤😊
yet more new toys.....'Ol Bruce just cannot help himself
Blann Tractor from Hampton, Arkansas, beautiful red Pete. The Blann family has been running trucks out of Hampton before I became familiar with them in 1988 when I made a truck parts delivery there.
I know of a 1949 F1 that got over-restored by folks that prefer Duesenberg car restorations. The F1 was a hay bale hauler in the Blann family. Anyone can correct me wrong on the exact year of this F1, and I remember the conversation with Big Mr. Blann while watching a tiger in a stock trailer at an indoor car show just down the road from where Little Rock Bass Pro is many years later. I was there for a model car show, plastic model cars, and the Blanns knew me through big truck parts and service business.
3:09 what is the truck on the driver side of your truck
We run those on bed trucks in the oilfield! They work well but are hell on the truck, so much strain on everything, chalmers suspension is about the only one that can handle it
We haven’t had a lot of complaints on the tracks being tough on the trucks. Which outfit were you with? Did you run them with the diff unlocked?
@@righttracksystemsint sorry, not complaining about them, the tracks are awesome, I’ve only ever seen one track separate while backing up onto a steel edged rig mat with a 80,000lb pump on the back!
but the issues I saw were blowing through bushings and even bending axles, seemed to me that as mud balled up inside it would put added strain on everything and “pull” the axles into each other
Now, this was alberta oilfields on rig moves, so 75% of all failures we’re operator abuse, 25%
overweight/overloaded
We’d hire Titan out of Edson if we ever needed floater support
looks badass from behind.!!!
Gunner are sticking you hung out to all of us
Those Tank tracks are so cool
Thanks
I hadn’t heard the “mouse in your pocket” joke since I was an apprentice 🤣
Damn good job aligning them trailers together lol 👍
How does the Res hold up with those tracks on that new truck
Saw you last night and you drove off like I wasn't even there
I love your truck
Bunch of lambos in and outside 😂
That seems quite useful for humid areas, I don't know why it is not used. If you have seen videos of truck drivers in Brazil, those wheels would be very useful.
We’re selling multiple sets into Brazil and Chile right now. Using them for land reclamation and pipelines.
With the mini cabover, you should get a diesel and drivetrain from a 330 john deere lawn mower and put that in it.
You could always add a jeep dolly to Brutus. Quick change between tandem or tri-axle semi.
bruce and his many TOYS
Tracks looks sick.
Is this what OF money looks like?
i highly doubt either of them have one.
@@lukehaar9380 she did.
@@barneyross4393 no shit😂 i had no idea
Haha. There not crazy if you put them to work. About 20k for that set in the video.
Lugs? You’re definitely not a farmer 😂😂. They’re called grousers.
Just tracking on down the road ✌️❤
i like it. cant wait what the scania can do.
Где-то в Питере призадумался и улыбнулся один российский Академик!
25:40 i honestly thought it was a seagull xD
A Peter built hauling a Peter built
Wow Aaron looks like he has lost a ton of weight. That's awesome.
Hey Brutus is looking sick with them tracks on the wheels it's great too see your brother Aaron working for you now are you going too start some work on Blue Collar?
Love the content Bruce!!! Keep doing what your doing!
Great video Bruce!
Dam that's what we needed for those log trucks lol
How funny you find tracks that military made in the 50s to put on ten wheeler trucks.
HELL YAHHH BROTHEEEEEEERRR!!!
Love to be there!
Man get with me when u come to white plains pulls again, I live 20 minuets away and have a single cylinder diesel off a military water pump the mini truck needs
keep the clips coming
Why wouldn’t you put a little Diesel engine in that mini semi? That would look awesome with smoke comin out of a mini stack 😂😂
For some reason those tracks look like they were from a Forestry machine! Good and interesting addition
probably where
I thought you were going to enter a tractor pull competition or something to test them out.
Ok……
I tought the Differentials wheels move independently when each side slips…..
same with 2nd axle from 3rd axle…..
ill get back to you guys when i figure this out 😬
Because as of right now,
i think damage will be occurred…….
C12 with a super 10 from the west coast
Are you croc rockin? Lol
That's a lot of birds!
The straps are supposed to go behind the rail it’s a rub rail it’s designed to keep your load from being cut loose if something was to hit the side of your trailer
Where are you going to be at the truck show
Are you gonna be at the Mayberry truck show
When will we see it do some serious pulling
6:31 was that someone yelling your name in the background 😂?
Prob lol
So freakin awesome!
The mini cabover needs a diesel engine from a small generator or garden tractor. Roll some coal lol
Do a harbor freight predator 212 ghost motor lol then it will do 55 with governor taking off...
❤👍👍👍👍🇪🇸🇪🇸Gran video Mi like
My favorite channel!!! Keep up the good work
Just put rc brushless motors in kiddos truck an you drive it like an rc car . Bount to be able to get reduction drives for them nowadays .Arron can surely master that conversion .
Ell... Tried the LandFinder App, can't use it from here in Canada unfortunately. I'll give some of my resume here.
CDL Licensed since 2016.
B-Train experience,
Flat deck-Lumber&Steel/Tarping-Currently for 1.5yrs.
Northern Ontario Canada 🇨🇦, Winter/Spring/Summer/Fall-Logging. And yes we have "Black-Earth" bottomless mud holes in the swamps too, 😂😅. Ice road haulage, etc.
2002-2016
Was an Underground Development Miner and equipment operator, Canada wide Blasting Certification, Ontario Mine Rescue Certification.
Want to get the hell outta Canada and away from Justin Turdeau.
Current employer is "OK"! But need a change since being recently divorced. Kids are all grown-up and gone. I'm free!! And want the most I can get out of life.
Bruce where's the trailer you were having built????
Seen you on the i44 today clean
Because you didnt want to pay Daddy back
Sweet!! Those are used in oil fields correct?
No mud trucks for logging
ah i see, thx@@TheTrollingFarmer
you should some logging with the tracks
You should check out the video of our product logging on articulating trucks. Visit our RUclips channel at: @righttracksystemsint
I think the mini rig needs a paint job or wrap in blue to match the rest
Good video by the way, but those are not tank tracks😅😅
Truck Tracks 🤷♂️
W video
When you gonna make them pipes active??
Eu não falo inglês más gosto de ver suas postagens mesmo não não sabendo Inglês
Tank tracks 😂😂😂
They’re truck tracks.
I want to see the trax in the snow
Damn, yall cant hit up bucees on these long road trips can ya?
No trucks allowed.
Nowhere better to stop for a sausage on a stick and a colossal chicken burrito, and a shit.
Nevermind! Just seen yall got an rv. Thems are welcome lol. Just Aaron gets shafted 😂
Pretty much😂
Where did you find your sunglasses?
Lol yall know that gunner is the star of the show get out of his way
Make an appearance at peterbilt of Springfield
Diesel 4,39$ a gal in west TX
the offroad channels really sleep on righttrackssystems they work amazing yet I only ever see them out in the oil fields
❤❤❤🇱🇷👍😁 great job Bruce later bud
I got a little 3 cylinder diesel engine that would be perfect for that little truck…..
How much were the set of tracks total, and are they easy to install and uninstall?
They take 15min to put on & are 15kish.
@@ruger8412pretty sure they’re 20k
Where’s the truck pulling/logging videos with the tracks?
In my honest opinion it should keep all 8 wheels in tne back from undergoing wear and tear. Or at least drastically slow down the tire wear
we need a update on the orange cabover
He sold it.
Показуха , про гусли 😂
Wheres the snow?
Where's the video of them in use
Hilarious when he crashes he's going to have a face full of roof
nick carter trucking is my neighbor out of St louis Michigan
Sir u should sell those I'm sure some loggers would buy those