This is the most clear and concise video. (I watched several beforehand that were neither!) It helped me fix my dryer for only $5! Thank you, Pappy Mike!
Thank you very much for the video. I got my dryer fixed by doing what you said. You had save me a lot of money also I am sure your video help other people too.
I replaced the Dryer Thermal Fuse and the Dryer Thermistor right next to it and dryer problems fix in 10 mins! Great How to video! Big thumbs up! (HE5t gas dryer) I bought both off Amazon under $20! Thanks!
Thank You for this. I followed the video and was able to repair ours as well. For the people wondering where to get the fuse. I used appliance part pros. put in model number from barcode inside dryer door and part was delivered in 48 hours. Happy wife, happy life
This repair of the fuse also works for the Maytag Elite Series He5 dryers, just another brand using the exact same parts and inside design for the heating and blower mechanics and electronics. Just replaced the thermal fuse following the video and it worked like a charm! Thanks for the video instruction.
PS. Would love a tip on how to disassemble the fan for better cleaning deep into the body, especially the chamber that exhausts, most videos stop at this same stage, having cleaned lint from just the front end and then focusing on the fuses.
How did you know it was the thermo fuse that needed replacement? How did you test it? Was it the first thing you tested? What else should be tested for diagnostic? I have same problem with same dryer but need to know what to test first. Thanks
Wish I would have seen this before taking off the back of the dryer. It was completely choked with lint so, I guess it works out. Thanks for the video.
On the dryer that I’m fixing the fuse doesn’t conduct electricity through it. But, when I by passed the fuse the motor turned on but then turned off in a couple seconds. Does that mean that I have a bad thermal fuse AND a bad motor?
Thanks for this video. I was making great progress until I hit the actual thermal fuse. You didn't show us how to remove the actual screw. The space is so tight that a drill or manual tool is difficult to use. How do you remove it?
In my case, I used an adjustable plier (channel lock plier?) to loosen the screw, then removed it by hand. Just the slightest of a twist is all it took. Having the right-sized socket wrench would have been the easiest path, though. As the dryer gets older, the fuse seems to be blowing out more frequently. Always have a spare at hand. 😃
Dude in my opinion you have another problem that u need to address , you fixed the ( no heat ) issue in your dryer but you did not fixed what caused the thermal fuse to blew ... That dryer needs to be completely taken apart , cleaned real good and clean your exhaust vent system ... Thats a fire hazard waiting to happen
Thumbs down because how do I know that I need to replace the thermal fuse??? You didnt show it not working and at the end you did not show us it working (flame on)!! I am just as lost after your video as before I saw it.
I made that comment more then a month ago, it took you that long to get back to me? I found the information I needed an hour later in a more informative video on RUclips made by someone who knows how to explain what problem the machine has & how to fix it and show it working.
Хобби
You were by far, the most helpful video on this particular matter.
Good job and thank you
This is the most clear and concise video. (I watched several beforehand that were neither!) It helped me fix my dryer for only $5! Thank you, Pappy Mike!
Thank you very much for the video. I got my dryer fixed by doing what you said. You had save me a lot of money also I am sure your video help other people too.
Thanks. That was very clearly, safely and calmly explained.
I replaced the Dryer Thermal Fuse and the Dryer Thermistor right next to it and dryer problems fix in 10 mins! Great How to video! Big thumbs up! (HE5t gas dryer) I bought both off Amazon under $20! Thanks!
taping off wires to their place was a great tip, thanks!
Thank You for this. I followed the video and was able to repair ours as well. For the people wondering where to get the fuse. I used appliance part pros. put in model number from barcode inside dryer door and part was delivered in 48 hours. Happy wife, happy life
En español por favor esta muy vien pero no entiendo
Honestly great video. Not sure if it’s what is wrong with my dryer, but definitely starting there. Thanks!
Great video. Worked perfectly. Repair person wanted $155 just to come to the house. I fixed it with the $5 part in this video and 30 minutes of work.
Thanks for the video , it was most helpful than the rest .
Gracias, me fue muy útil, lo esplico muy bien 😁
This repair of the fuse also works for the Maytag Elite Series He5 dryers, just another brand using the exact same parts and inside design for the heating and blower mechanics and electronics. Just replaced the thermal fuse following the video and it worked like a charm! Thanks for the video instruction.
PS. Would love a tip on how to disassemble the fan for better cleaning deep into the body, especially the chamber that exhausts, most videos stop at this same stage, having cleaned lint from just the front end and then focusing on the fuses.
How did you know it was the thermo fuse that needed replacement? How did you test it? Was it the first thing you tested? What else should be tested for diagnostic? I have same problem with same dryer but need to know what to test first. Thanks
Thank you saved me from buying a new dryer!!!!
Wish I would have seen this before taking off the back of the dryer. It was completely choked with lint so, I guess it works out. Thanks for the video.
I was thinking the same thing. I should've watched this first AND wore a Darth Vader-like face mask.
Love your video. Can you tell me where I can get a thermal fuse. Thank you
THANK YOU!!
Also note, this tutorial worked perfectly for my Kenmore HE 5.
Saved my a bunch of money!
Thanks again
I also just ordered the fuse on Amazon, next day shipping, $10. Part number is written right on the fuse for simple ordering.
Thanks for this video. What are the tools I need to purchase to do this repair?
great on changing fuse but nothing on how to get everything reinstalled in the dryer. somewhat difficult in my experience
On the dryer that I’m fixing the fuse doesn’t conduct electricity through it. But, when I by passed the fuse the motor turned on but then turned off in a couple seconds. Does that mean that I have a bad thermal fuse AND a bad motor?
Thank you very much!!! Can I know what is the part number? Thank you
I was wondering if my issue is similar to this. The burner does turn on but won't stay on. Once it is off it stays off.
I have heat from my HE4 but only on certain settings, would this be the fuse or thermostat or element?
Great video thank you. Where did you get your thermo fuse?
They added that fuse or whatever in the 80's, I believe, so they get the service-call at sears. I just bypass them.
where did you get the thermal fuse? is it available on Amazon?
Thanks for this video. I was making great progress until I hit the actual thermal fuse. You didn't show us how to remove the actual screw. The space is so tight that a drill or manual tool is difficult to use. How do you remove it?
In my case, I used an adjustable plier (channel lock plier?) to loosen the screw, then removed it by hand. Just the slightest of a twist is all it took. Having the right-sized socket wrench would have been the easiest path, though. As the dryer gets older, the fuse seems to be blowing out more frequently. Always have a spare at hand. 😃
I’m with you on that. I was feeling all hopeful and then BAM: “the magic of editing.” 😡
Where did you buy the thermal fuse ? Home depot ?
Where did you get the thermal fuse?
Where do you buy the fuse from?
Is there a part # for that fuse?
But did the fuse fix the issue?
How do you know if is a fuse or fuse?
I have HE5 dryer. I removed the 2 crews, but still can't remove the panel. Please help. Thank you.
Hung Nguyen I too have an He5 dryer. Ours has more screws. The front panel has 4 i think and the blower cover has 4 or 5.
@@jcmoney23 Thanks JC. After I asked the question, I looked under the panel and saw another 2 screws, removed those and took panel off.
buenas noches
Hola como apago el boton e control lock??
What happened if it not the fuel The dryer still have no heat
Part number??
Dude in my opinion you have another problem that u need to address , you fixed the ( no heat ) issue in your dryer but you did not fixed what caused the thermal fuse to blew ... That dryer needs to be completely taken apart , cleaned real good and clean your exhaust vent system ... Thats a fire hazard waiting to happen
lindo video yo yengp un kenmor a gas nesecito unos repuestos de argentina quien puede mandarmelos
You DID NOT show how you removed the thermal fuse. Since this is an important step in replacing it your video isn't helpful at all! Thumbs down....
Thumbs down because how do I know that I need to replace the thermal fuse??? You didnt show it not working and at the end you did not show us it working (flame on)!! I am just as lost after your video as before I saw it.
Sounds like a you problem
I made that comment more then a month ago, it took you that long to get back to me? I found the information I needed an hour later in a more informative video on RUclips made by someone who knows how to explain what problem the machine has & how to fix it and show it working.
@@lenielupian2699 thanks for not sharing that video!
@@lenielupian2699 So why didn't you post a video of you replacing it?
@@lenielupian2699 whats the video u found