Sediment Problems and How to Fix it. Discolored Well Water After Heavy Rainfall. Full System Check
HTML-код
- Опубликовано: 4 апр 2024
- H2o-Mechanic Online Store
www.h2o-mechanic.com
Order Direct from Us.
This video Covers the repairs needed if you dealing with water problems after a rain fall. Along with a pressure tank replacement and Submersible pump wire repair.
There's dozens of Helpful Plumbing Videos on my Well Pump Q&A Playlist, So go check it out!
Comments are Always Live!!! Here to answer any questions you may have.
Show Support by Subscribing if you Learned Something New.
Best Water Well Plumber on RUclips!!!
Donations are appreciated!
Hwdracing@gmail.com. - PayPal
Philip-Hensley-3 - Venmo
❤️ Super Thanks - RUclips
#wellwater #wellpumptroubleshooting #submersiblewaterpump #pressuretank #pressureswitch #plumber #tradesman #homesteadadvice #plumbing #nowater #educational #welldrilling #construction #wellpump #muddywater #sediment #education
![A Boogie Wit da Hoodie - Body (feat. Cash Cobain) [Official Music Video]](http://i.ytimg.com/vi/RMT3AlAs0r8/mqdefault.jpg)
I learn something new with each video that I watch.
Fantastic video. My wife and I done our tank we piped it all in! So, I'll save this video for future reference! God bless you brother. Looking forward to see more of your videos!
Very informative video, thank you! Very obvious you know your business very well! Pun intended😂
Wire insulation doesn't go bad from just being there. It was damaged from careless removal/ installation at some point. You admitted to changing the pump in the past. If that wire was damaged before or during the time you last changed the pump, you should have replaced the cable at that time.
Very good as usual. I do miss the One s .........
Good to watch those who know what their doing .
Super knowledgeable guy!
Love these types of videos. Explaining how things works. Thank you.
Good job! One hell of a good worker
Yall fellers made that look easy.
Yall fo fine work. Keep it up buddy! Andy
Thanks for sharing your videos. I have a better understanding on how a well works Thanks to your channel 🇺🇸🇺🇸✌️
With every video I learn something new. Thanks
Great video I really enjoyed picking up knowledge on a subject that is not one covered in the UK.
I've had wire in my well for thirty years, I put my wire in 3/4 inch black poly, from top to bottom. Works great
Bedankt voor de informatie zo leer ik ook nog een beetje bedankt daar voor. 👍
Groetjes uit Holland 👋🏼🇳🇱
I love the diagnosis videos. Especially when the diag takes while to prove.
Thanks for the informative videos! I love how though you are and the details of the nuances of well systems. Please keep ‘em coming!
Thank you for the videos and teach me a lot. You are a very knowledgeable man in your trade.
I just sent you some paypal lunch money as a thank you for sharing your knowledge. You know what I mean: the tricks that the pros know that average DIY person will probably never have the opportunity to learn. I am getting ready to replace my 3rd pump, at the third house I have lived at. I thought I knew how to do it but you have soooo many tips and secrets. I pulled the pump the other day (muscled it up 135 feet) and I thought I was gonna die. Then I saw the clever rig that you made with the lawn mower wheels, which I am making an ok copy of right now. You may have saved this old man from having a heart attack, LOL. When I pulled it up a few days ago the pump checked good (its at least 13 years old) but the wires were chaffed in several places and I ended up having to use the green wire as a hot. I am going to the well supply place tomorrow to get everything new: wire, pump, snubbers, low-pressure trip pressure switch, etc. The 13 year old 3/4 HP pump is probably on borrowed time. It's total run is about 700 feet but its head is only 230 feet. The pressure tank is only 8 years old and is inside the house, but I will check the bladder pressure and listen for the ring and make sure its cycle time is correct for the size of the tank. (A 40 gallon bladder.) And all the other subtleties that you have shared. This will hopefully be the last time I pull a pump in my lifetime. But I think the static water height is about 40 feet higher than when I checked it several years ago, but the water still tests good like there isn't a ground water issue, I hope. Hmmm.
Thanks again, and enjoy lunch on me! Lloyd
Thanks for sharing, this process was very cool to learn about. Such interesting engineering involved that we take for granted.
Hi 1st time on your channel, me being in the handyman business, I like watching videos of people fixing things, I must say I was very impressed with the details of explanation that you give your viewers which keeps them watching and wanting more,
Thank you sir & keep up your good work
When l was a kid my parents had a well then when l moved out l was on city water for years and years ...about 9 years ago l moved to Florida and was on a well again...all that being said l enjoy watching what you do to drill as well as repair wells it's very interesting thank you.....one last thing please always take extra caution when working it live wires l want to keep watching your videos for years to come
Awesome and outstanding as always.Thanks for sharing and taking us along
Thanks!
Thanks for videos. Do like the way you work on well and fix's problems.
I’ve learned a ton about my well from your vids!
Excellent content, thank you!
Thank you
Keep up the good work....
Great video
nice fix!
Very informative and great to know!
I'm in the Southeast (North Carolina) sand well country...Your work looks great.. you guys def got it going on..But why on earth would you guys not dig out around the pipe, grout it in, as best you can, even if it's a few feet, and cast a 4'x4' pad/slab around that 6" PVC case?!?!?.
Just my 2 cents, but in my neck of the woods, thats the most paramount is to slab out around that casing stub up.
90% of your water intrusion from rain water, will chase the casing down the sides of the sleeve. In NC, we have to have the shaft concreted around the 4" or 6" pipe 48x48 or 60x60..
The slab leaves a nice place for a data plate too, and works as a footing for fabing up a pump house where the pressure switch and bladder tank can also live, along with that breaker shut off...then y'all wouldn't have had to work around all day with homeowners away. Shame the things we work to work around.
We do we all like that here
I'm real surprised your job well there didn't have that setup.
..
Interesting. Thanks 😊
good job
Great video.
very informative, thank you.
One of your very best videos
gr8 job very informative
Thank you for your videos! Keep up the great work!
Learning soo much, 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👀
That was allot work, very thorough.
Another good video 👍 keep up the good work !!
I learned a lot from this video...thanks!
You know your trade well, impressive 👍
Great video. It's interesting to see all the issues this one had.
I learn something every time. You’re a good teacher. Thank you. Keep em coming.
As a well driller in Australia, we deal with mud rotary as most of our land is flat coastal.
We do have afew guys with DTH rigs for the hills but mainly mud rotary around these parts of Western Australia!
We set casing from the BOH to surface with slotted casing down the bottom, gravel then bentonite chips to seal off the surface water.
I’m glad to see everyone getting work especially us when we get government work 😎😎
Great video, Keep up the diagnosing video's and all the other type too.
Have a great day
Just got done getting a new hot water tank and I remember all these well videos. cracked tank flooded my basement while at work, which was such a pain. Water is a big deal.
I like that warning pictogram on the old tank , showing it blowing up .
Multiple problems with a single cause. Well done!
Hi fruend thank you for sharing borehole water drilling good job
My aunt had that over pressure issue. Her house required a pump to pull the city water up to the house, but when there were bad storms I'm guessing the barometric pressure difference caused problems. She had this happen a couple times , her house was on top of a mountain above the town. I help her make the repairs once. The o-rings blew out on the hoses to the toilet and sinks, some times the hoses would break, the house was only a couple years old. I think she regretted building it there . The flooding happened about 3-4 Times over 6-8 years ..
FYI working with 240 volts you can wear dry leather gloves and not get shocked. 20 years as an electrician
A lot of issues on that one. Nice work
Good video…love to watch your troubleshooting. I beat you to the diagnosis of the pressure tank this time though.
Hellebore also called the Christmas Rose. We planted some 20 years ago. It spread and now we have hundreds.
Great video I always check for current draw also with a electric motor
We had a well silt in and the grit from the silt trashed the pump. Well was bad after that. We could potentially have added a bunch of gravel to act as a filter but it was a total gamble. So we drilled a new well. The well guy said ours was pretty unusual but that it doesn't take a huge amount of dirt to wear out the impellers of the pump.
Watching your videos makes me wish I took a different profession as a Young Man.
My grandpa's old well had a light wired into the pump circuit so it came on with the well. Any time that light was on when he wasn't using water and he knew he had a problem. His pump house was probably 500 feet from his house so you could only really see it at night, but it was simple and it worked. I am on a well now myself and after seeing this I'm thinking about wiring in a little led light.
My well is set up with a pumptec and a big pressure tank...I could see it getting up to all kinds of shenanigans before I knew I had a problem.
Why don't they all get set up with some kind of an indicator?
Thanks, All i can say is dam your good!
I was told that it was standard practice to replace the wires every time you get a new pump. Just in Wisconsin?
I love all your knowledge and appreciate all you show. Do you still think the well needed to be sleeved knowing now the tank was bad?
My pressure switch nipple also plugged up like that. I noticed it when the pressure release on the water heater would spray toward the end of every pump cycle. I suspect those pressure surges also blew the bladder in my pressure tank.
I was hoping you'd share your trick for hooking up live wires 😂
I think its fine to put the filter before the tank, you just need to put the pressure switch before the filter.
Hellebores hybridise themselves and the seedlings can be all sorts of colours even double ones, great plant to have but they can seed everywhere.
abought 400 where i live , for the gravel plus bentinight and glue dont know where you live but prices could be higher.
We had a municipal system malfunction in pipe line near water filtration plant and a group of houses got over pressured . The water plant feeds a city of 400k with smaller communities tapped in along the way
Love your videos. Just a thought. Why not use Chlorine tablets instead of the powder? Get 100% of chlorine to water, use less, easier to store.
A bigger concern for me with the pump not shutting off if there's no pressure relief is the bladder tank. Or a contact tank for a chlorinated system. Many are only rated for 100-125PSI. If a tank pops it could be pretty bad
You put the packer in upside down. The small ribs are supposed to be above the large ones
Did you pressure test the new tank before turning the water on?
Was wondering what would be a good filter system for a well. A couple of years ago I had a well drilled and have not been able to use it the water is muddy.
What a mess. That pump took a beating.
Thank god that guy was wearing a mask! 🇺🇦
Where did you get the wrenches to push that casing down the well
What size pump would you recommend for a 40 foot bored well?
You could line it all the way to the bottom by taking last length of pipe below packer snd drilling holes in it to let watet to the pump but keeps kt from caving in.
😊👍
I always used a ball valve and a tee to reduce down to quarter inch for gauge and could check gallons per minute and be able to close valve down to check pressure. You can dead head pump to check maximum psi or see what gpm pump is pumping at different psi
He has all that gear in another video and a complete test stand for pump verification. just not out here for this job
As a 40 year experienced general, i would always try to quot, best and worst case estimations. Giving underbid estimations by "$1,000 is a big deal for most consumers. It's always much much better to quote higher and come in under that bid!!! Exactly like time estimations, I always try to quote longer than saying i can get it done in 2 or 3 days so when 'you get it done in 2 days or less, you're the hero!!! Its a great way to get top ratings, good referrals, and more work from the same customers. I'd sometimes get tips from customers too for being on time, and cleaning up my mess 100%. Quality was always a prerequisite!
For the price of the wire you should have changed it when you had it out in 2021
Would changing the bladder tank first negated the pulling of the well pump ?
Same thing happens on a steam boiler. The pigtail gets filled with kaka and the pressuretol can't shut the boiler off because it's not seeing pressure.
Why that wire isn't black soow cable cord poly cover for that kind of work?
If you had known the tank was bad before you put the liner in would you still put the liner in?
What kind of tools was that you use to get that pvc down that hole?
Mt well has a packer, water filled the area between the packer and casing and when level went down the packer slid further down the well. How far it went, I have no idea.
You would think that there would be a way to better insulate the wire and prevent chaffing.
Why isn’t there a protective sleeve for those exposed wires?
by 2:30 I'm guessing line/fitting leaking inside the well.
which explains low pressure/volume, pump running continuous, lower current draw, warm water/well and sediment in the water from washing down the casing/bore.
wouldn't be the first time I've seen that happen and I'm not a well service, although I have done plenty.
is 2 wire better than 3?
Someone forgot the torque arrestor
😂
It wasn't forgotten
Watch his other videos
They cause more issues than they fix so they aren't used
I am wondering-how to dig a well on a mtn with a rock and slate base?? I am putting in a rain catchment but really would like a well if financially feasible..
How far does the borehole have to be from a septic tank system ???
Dang man put wire protectors on there for the customer to protect against the chaffing
How do you get lime out of your water?