But you don't need to! Because you can just feed the next mag in by hand even as the current mag is being fired. You'll see in our 420 vid or whatever but its super easy to have a constant stream of darts with good technique -R
Make.Test.Battle Still remember a past video of you guys testing the 22 round worker mags? And how that guy didn't buy 22 22 round mags? Yea I found it odd that Ryan didn't buy 20 20 round clips, but the more the better.
Excellent video, as always. Now that I have HPA equipment, I'm probably going to have to buy a Destiny. I didn't realize how simple the conversion was from the air bladder system. looking forward to the future war footage...
I suggest actually using a small amount of dishwashing liquid instead of soap. Wash your hands like you normally would with it and it gets rid of all the epoxy!
That would have been a great idea, but I tried it myself (with a slightly smaller air tank) and all of the air escaped through the barrel when it was pressurized, instead of building up in the air tank around the barrel.
Hey, I was wondering about a mod idea. I have a Tri-Strike and I love the rocket launcher part and I want to use it as a silly sort of secondary blaster for fun but I want to change it so it isn't powered by how hard you push the back of the stock and is instead powered like one of those air pump guns. Sort of like how the destiny is normally. I use the stock as a pump to fill it with air and then have a trigger on the launcher to fire the missile. Do you think that's at all possible, or am I just being more than a little dumb?
Boomco sells individual 40 dart magazines. They are also licensed to produce and sell the Halo MA5 rifle!!! The blaster design is similar to the Destiny. I think the only downside is you have to buy their darts. You should totally do a Halo re-shell.
Yeah I've seen the MA5 done in a similar way, but in Aus its impossible to get the mags and the darts in any quantity that would make it viable to run as a blaster -R
3:37 I know that. I have barely any fancy tools. In fact, my tools are so makeshift that people say that they are prison escape tools. My most and basically only fancy tool is a soldering iron.
Instead of mounting the QEV system to the top, how about using the space under the grip where the original pump went, if you need more space for the tank you can use the space from the original bladder. That way it would be all internal, there is still enough space to run pipes around through the rear grip and under grip space.
Since this basically has a miniscule air tank, do you think a direct air impingement behind the dart without any air tank/reservoir would work (theoretically speaking and non-correlated to the destiny)? I'm thinking about a compact sidearm, where there isn't enough space for an airtank. Love thee vid, you guys make some of the highest quality nerf videos out there.
On your "How to make a super stryfe" video, I used the product link for the LiPo and did everything exactly the same as you. I even went back through the video. No matter what I do, the LiPo will not fit in the battery tray. How do I fix this? Please respond as soon as possible.
I'm gonna be releasing Ultra Sledgefire gameplay first. The very first game with the Destiny it was having some feeding issues in the heat of battle. So it's not the most fun footage. -Justin
Us airsoft master race people can also readily modify our rifles to HPA. I'm just messing around though. If it weren't for Nerf and this channel, I wouldn't have eventually found an interest in airsoft.
"Knead it like a cat on a beanbag" I am thoroughly triggered, unslubscrebed. I don't just knead beanbags, I also knead fuzzy covers and people's laps. >:C
Hi MTB love your videos. I'm a big fan of air blasters like this. Flywheels are nice and all but air is just so much more appealing. I was wondering if you can link me on how to do an lpa system for this. I found a video by COBB(forgot the rest sorry) but it uses 1/2 inch couplings. Is there any way to adapt it to the 6mm ones you are using?
That looks SUPER doable, but the just FYI, the Destiny buy link doesn't ship to Aus, but also, where the heck should I source a pinball tank or similar and regulators?
Fair enough, was having a bit of a look already, and while I might be capable, I think cost may keep me from doing this soon, but one day, at least it'll give me time to get educated and do it right (I spent a LOT of time learning before I water-cooled my computer ;) )
Sure it is. It still fires Nerf darts. The word "Nerf" has become an internet colloquialism for foam dart shooter. When you organise a Nerf War you don't call it a Nerf/Buzz Bee/Dart Zone/Adventure Force/BoomCo War, you just call it a Nerf War. -Justin
I could, but I already have it on the bottle. It turns out that 50 PSI works just fine for the Destiny and the Sledgefire so no need for a second one -R
Great video, I have a question that doesn't really pertain to the video but it's still a mod question. I recently got a tristrike and an orange mod works spring to mod it. So I try to open it but the screws are soooooooo damn tight, like they're glued in. I'm pretty strong but I gave it to my dad he couldn't do it. Gave it to my buff ass freinds (who is like rediculisley strong) he could barely do it and they still aren't out. I've gone through to tri strike's and I'm about to get a 3rd to day. I've tried all different screw drivers along side the base sizes of #1 and #0. What can I do to get these damn screws out. If not what's another blaster I should try to mod. (sry for the long comment this is just really annoying)
I ended up going with about 50-60 PSI but realistically it will actually depend on you setup and the flow rate that you achieve as to what exact pressure you use -R
im an old paintball player and fellow engineer, and i've thought about this kind of thing for a primary, its perfect. super easy to setup. the problem is us plebians getting clips for the stupid thing. also, pro tip, don't go from tank pressure, to 65 psi, to 25 psi. instead T off the paintball tank into two branches, one at 65, and on at 25.
But then you have to run 2 regulators off the rig which gets bulky and annoying and thats all hanging on a single 1/8 hex nipple. As it turns out, the Destiny really likes being run at 50ish PSI so its perfect to run with the Sledgefire. I may investigate increasing the return springs for a bit more kick
But do you even know the difference? A Clip is used to load a mag or a cylinder. Be it detachable or built into the gun. These are mags, they have barrels/chambers and directly interact with the action. Like a Revolver cylinder, and those are loaded with moon clips. According to the Forgotten Weapons channel they are called Bars or Magazine Bars. Harmonica Rifle: ruclips.net/video/GxNcjRf0O0o/видео.htmlm49s Harmonica Pistols: ruclips.net/video/y-N1MRFnByQ/видео.html -Justin
![[Nerf Build Log] Brass Breech Mod Buzzbee Sentinel/Ultra Rapid Tek | Make Test Battle](http://i.ytimg.com/vi/O-qzBPhF1gg/mqdefault.jpg)
![[Nerf Build Log] Brass Breech Mod Buzzbee Sentinel/Ultra Rapid Tek | Make Test Battle](/img/tr.png)
First Mod of the year. Huzzah!
-Justin
I'm still waiting on your video with a *COMPLETED* pump-action shotgun. (yes, I've seen your unlisted video, in which it doesn't function)
soon soon -R
Make.Test.Battle i cant wait for that
Make.Test.Battle I remember you said somthing to moving to Norway in one stream. If you do FREKING AIRSOFT BRO!
Make.Test.Battle what if u put the pump back to pump that rocket launcher u were talking about
I approve of this.
You should try connecting 2 clips together to make a 40 dart clip....
But you don't need to! Because you can just feed the next mag in by hand even as the current mag is being fired. You'll see in our 420 vid or whatever but its super easy to have a constant stream of darts with good technique -R
"This guy, didn't buy 20 20 dart clips. " That other vid and this vid are great.
What are you on about?
-Justin
Make.Test.Battle Still remember a past video of you guys testing the 22 round worker mags? And how that guy didn't buy 22 22 round mags?
Yea I found it odd that Ryan didn't buy 20 20 round clips, but the more the better.
Oh right sorry. Forgot.
-Justin.
You guys make me realize how easy HPA nodding is, if only I had the money for it.
The problem is when you underestimate it and hurt yourself. It is easy yes, but you need to be aware of the risks and dangers -R
Crazy-awesome vid and idea guys, went live right before the clock here ticked over to my b-day as well! XD
Excellent video, as always. Now that I have HPA equipment, I'm probably going to have to buy a Destiny. I didn't realize how simple the conversion was from the air bladder system.
looking forward to the future war footage...
Lol check out Ryan being all cautious with gloves when using epoxy putty when i spent pretty much all of today using it with my bare hands. "Oops".
Tiger Foam same
I have them so I use them :P It just annoying scrubbing your hands for 2 hours afterwards! -R
I suggest actually using a small amount of dishwashing liquid instead of soap. Wash your hands like you normally would with it and it gets rid of all the epoxy!
Make.Test.Battle I know how you feel lol
Dude, you didn't sensor my goods! I'm too young to have a sex tape
"It Wasn't made for RUclips" 13:33 lol XD
I just had a scary idea, that mtb will love. Hpa drain blaster. If you put a hopper on it or shotgun shells it would be the best primary of all time
That would have been a great idea, but I tried it myself (with a slightly smaller air tank) and all of the air escaped through the barrel when it was pressurized, instead of building up in the air tank around the barrel.
Wow, ingenious! Extending the connection
Yeah... A little bit of cheating to save a lot of effort to replace or extend the hose -R
This is some next level stuff, I remember back in the day when using brass tubing and making an angel breech was serious nerf modding.
That is still serious modding. :D Longshots aren't dead.
-Justin
the war today was so good but the destiny was kinda op
>:D Just the way I like it -R
welcome to another episode of Ryan NOT WEARING SAFETY GLASSES
Safety squint -R
You're talking about the people that call flip flops australian safety boots. :P
the hell is a flip flop? Do you mean thongs?
call 'em flip flops in the US of A mate.
wierdos :P
FIRST VIEWER AND COMMENTOR OTHER THAN MTB. I"M THE BIGGEST FAN!
Battle butts!
SECOND
Third.
FIFTH!
IAmBobololo HI WILL YOU RESPOND PLS DO I LOVE YOUR CHANNEL
SIXHUNDRED AND SEVENTH!
YOUR PLAYING GOD NOW "making new screw ports" PFT
I've been waiting for this one :D
Hey, I was wondering about a mod idea. I have a Tri-Strike and I love the rocket launcher part and I want to use it as a silly sort of secondary blaster for fun but I want to change it so it isn't powered by how hard you push the back of the stock and is instead powered like one of those air pump guns. Sort of like how the destiny is normally. I use the stock as a pump to fill it with air and then have a trigger on the launcher to fire the missile. Do you think that's at all possible, or am I just being more than a little dumb?
CardTrickmedia seems possible
although the parts would cost more than the thing
CardTrickmedia it is possible but it is really hard
Boomco sells individual 40 dart magazines. They are also licensed to produce and sell the Halo MA5 rifle!!! The blaster design is similar to the Destiny. I think the only downside is you have to buy their darts. You should totally do a Halo re-shell.
Yeah I've seen the MA5 done in a similar way, but in Aus its impossible to get the mags and the darts in any quantity that would make it viable to run as a blaster -R
it finally came. praise the Nerf gods. thank you mtb!
3:37 I know that. I have barely any fancy tools. In fact, my tools are so makeshift that people say that they are prison escape tools. My most and basically only fancy tool is a soldering iron.
Instead of mounting the QEV system to the top, how about using the space under the grip where the original pump went, if you need more space for the tank you can use the space from the original bladder.
That way it would be all internal, there is still enough space to run pipes around through the rear grip and under grip space.
Cos if I mount it on the top, if can have a bigger tank with MOAR POWAH -R
There's no pleasing some people... :P
May have been said but in this hemisphere if you put teflontape on in the opposite direction it doesnt unwind itself when you screw it in.
I get it right 50% of the time :P Nah I know this, but I'm fallible and make mistakes -R
Awesome mod I can't wait to do something like this. Just have to save the money for the hpa rig.
If you wanted to make the psi higher just add stronger springs on the mech...
boys! This is a game changer!
Since this basically has a miniscule air tank, do you think a direct air impingement behind the dart without any air tank/reservoir would work (theoretically speaking and non-correlated to the destiny)? I'm thinking about a compact sidearm, where there isn't enough space for an airtank. Love thee vid, you guys make some of the highest quality nerf videos out there.
huh? I don't understand what you mean -R
Next time, we HPA a maverick.
Beret How though?
Not sure, it's their channel. But it'd be hilarious and I'd use one.
This gun is probably my favorite it got power and a really good rate of fire and is not that long to reload
yeah the reload is blazing fast cos you can just feed in the next mag as the previous one fires -R
man i need to do some hpa stuff, nice video
the sound of it firing is impressive. looks like it kinda hurt to get hit by it.
rat tat tat >:D -R
HPA Master race :D
Why the 6mm tubing and quick fittings? its what was already in the Destiny? What do you preffer otherwise economy wise or performance wise Ryan?
I want all those mags!
On your "How to make a super stryfe" video, I used the product link for the LiPo and did everything exactly the same as you. I even went back through the video. No matter what I do, the LiPo will not fit in the battery tray. How do I fix this? Please respond as soon as possible.
Makes me wonder how hard it might be to turn the destiny into a rail mounted modular piece for emergency spammage.
Not very. you can cut off 75% of the bulk if you have an air supply like this
4:10 why didnt you just take out the bottom rail tube thing and the back handle/grip out and make the rest of the back just into a stock?
Can't wait for the gameplay. what is the range on that thing?
I'm gonna be releasing Ultra Sledgefire gameplay first.
The very first game with the Destiny it was having some feeding issues in the heat of battle. So it's not the most fun footage.
-Justin
Awesome seriously awesome it's awesome
Us airsoft master race people can also readily modify our rifles to HPA.
I'm just messing around though. If it weren't for Nerf and this channel, I wouldn't have eventually found an interest in airsoft.
I wish it was legal here ;( -R
Yeah, it really sucks. There is a ton of awesome stuff, and people are less judgy.
"Knead it like a cat on a beanbag"
I am thoroughly triggered, unslubscrebed. I don't just knead beanbags, I also knead fuzzy covers and people's laps. >:C
supahvaporeon can't tell if you're being sarcastic, or being an idiot, either way, shut your mouth
Hi MTB love your videos. I'm a big fan of air blasters like this. Flywheels are nice and all but air is just so much more appealing.
I was wondering if you can link me on how to do an lpa system for this. I found a video by COBB(forgot the rest sorry) but it uses 1/2 inch couplings. Is there any way to adapt it to the 6mm ones you are using?
There should be a kit that’s made out of aluminum so it can stand a higher psi
can you post the links to where you got the hps stuff
I'd rather not. if you are curious; join the Facebook group "Nerf High Pressure Airheads" -R
That looks SUPER doable, but the just FYI, the Destiny buy link doesn't ship to Aus, but also, where the heck should I source a pinball tank or similar and regulators?
Yeah! I'd rather not post the paintball links but if you are curious, jump on the "Nerf High Pressure Airheads" Facebook group -R
Fair enough, was having a bit of a look already, and while I might be capable, I think cost may keep me from doing this soon, but one day, at least it'll give me time to get educated and do it right (I spent a LOT of time learning before I water-cooled my computer ;) )
Cool mod. How do you get your paintball bottles filled?
SCUBA stores and paintball fields -R
So you guys buy 21 22 darts mags and then you buy 22 20 dart mags, the OCD is killing me
Nathan Beck are you related to someone named Shirley by any chance?
HPA Vulcan???? using an electric ROF controller?
It ain't a Nerf mod if it's not a Nerf gun
Sure it is. It still fires Nerf darts. The word "Nerf" has become an internet colloquialism for foam dart shooter.
When you organise a Nerf War you don't call it a Nerf/Buzz Bee/Dart Zone/Adventure Force/BoomCo War, you just call it a Nerf War.
-Justin
Just wondering where you get the push connectors from?
So what pressure exactly worked the best for you? I have all the pb gear to make this myself and am curious
I run it at about 50 PSI -R
Make.Test.Battle Thanks so much! I will probably be making one of these monsters for myself now ;)
hpa a drainblaster
Will this work with the boomco rapid madness?
Those are clips I think. I don't a comment war.
fyi I call clips and mags the opposite for ironic effect -R
Lol just to trigger people !)
Could you mount a regulator in the big void where the air tank was?
I could, but I already have it on the bottle. It turns out that 50 PSI works just fine for the Destiny and the Sledgefire so no need for a second one -R
Not pumping it up I want one 🌚
Great video, I have a question that doesn't really pertain to the video but it's still a mod question. I recently got a tristrike and an orange mod works spring to mod it. So I try to open it but the screws are soooooooo damn tight, like they're glued in. I'm pretty strong but I gave it to my dad he couldn't do it. Gave it to my buff ass freinds (who is like rediculisley strong) he could barely do it and they still aren't out. I've gone through to tri strike's and I'm about to get a 3rd to day. I've tried all different screw drivers along side the base sizes of #1 and #0. What can I do to get these damn screws out. If not what's another blaster I should try to mod. (sry for the long comment this is just really annoying)
Dunno! A #1 Phillips is what you need but I've never heard of screws being glued in. That said I've never tried opening a tristrike -R
Thank you, I would love to see a mod guide😃😃
WHY DO YOU NERFERS SWITCH MAG TO CLIP AND CLIP TO MAG
I just got a destiny for myself it's great and I really want to make it better so what is the recommended psi I should use for this?
I ended up going with about 50-60 PSI but realistically it will actually depend on you setup and the flow rate that you achieve as to what exact pressure you use -R
Make.Test.Battle thanks man I'll tinker with it
Exactly. Start low and bring it up til you're happy -R
its not a mag its a clip
what is that shirt your wearing?
Which Paintball Tank did you use?
Ninja Pro V2 SLP 68/4500 -R
Do this mod with the boomco halo rifle :D
Sadly Boomco is suuuuper rare in Australia! It looks cool but theres no way I could get enough mags or even just the ammo -R
It's the same in italy
What a shame T.T
Will you use this at January HVZ
Im hoping to! -R
Can you make me one? Im too lazy. How can i get a comission?
Um click where?
We don't have the vids up so no annotations yet! -R
Would the ma5 blaster work for this mod?
Yeah definitely! -R
00:3 WTF
clip not mag
harmonica bar not clip -R
what was the final PSI?
I think I was using 60 PSI to good effect -R
thx
What psi did you end up with?
50 I think so I can use it with the sledgefire :D -R
can it use the 40 round boom co clips?
Nope
aww
where did you get the clips?
A friend knows a guy who has a contact at buzz bee -R
im an old paintball player and fellow engineer, and i've thought about this kind of thing for a primary, its perfect. super easy to setup.
the problem is us plebians getting clips for the stupid thing.
also, pro tip, don't go from tank pressure, to 65 psi, to 25 psi. instead T off the paintball tank into two branches, one at 65, and on at 25.
But then you have to run 2 regulators off the rig which gets bulky and annoying and thats all hanging on a single 1/8 hex nipple. As it turns out, the Destiny really likes being run at 50ish PSI so its perfect to run with the Sledgefire. I may investigate increasing the return springs for a bit more kick
it is a clip
it is a harmonica bar -R
Will u sell this
Nah.
-Justin
can we buy these?
The Destiny? yeah. Amazon link in the description.
-Justin
HPA Centurion. Nuff said.
Lucifer Shiroshi no, u might as well make a hpa deploy
15th comment
333 like
164th
:] I'm early
Mtb! You call clips mags and mags clips there is a difference so you know
But do you even know the difference?
A Clip is used to load a mag or a cylinder. Be it detachable or built into the gun.
These are mags, they have barrels/chambers and directly interact with the action. Like a Revolver cylinder, and those are loaded with moon clips.
According to the Forgotten Weapons channel they are called Bars or Magazine Bars.
Harmonica Rifle: ruclips.net/video/GxNcjRf0O0o/видео.htmlm49s
Harmonica Pistols: ruclips.net/video/y-N1MRFnByQ/видео.html
-Justin
I do know the difference a mag feeds a projectile into the gun blaster or whatever and a clip move with the projectile
Ok maybe you have a different definition in Australia but that is our definition in America
"a clip move with the projectile" That doesn't make sense, explain.
-Justin
A clip, like the ones in the destiny are moved so the currently stationary darts can be moved and fired. The clip is then ejected