The easy way to remove old black tar linoleum adhesive from hardwood
HTML-код
- Опубликовано: 29 сен 2024
- This is what my completed project looks like: • Finished floor
Looks like Philly Floor Store has changed their name to City Floor Supply. Here is a link for the mastic removal block I used on the City Floor Supply website: www.cityfloorsu... 
Хобби
I found simply using a watering can and letting the water sit for a bit the tar will turn a grey color and scrape right up. We tried sanding first and that would've taken forever with the amount of flooring we had to do. Plus the mess 😝 seriously yall sometimes it's the simplest things 🤷🏼♀️ We restored 2500sqft of original hardwood floor in a 1900's building with a watering can and scraper ❤
Pouring water on wood floors is really not recommended though
I took up carpet, all kinds of black dust, looks like soot. Sweepable. I found out there is linoleum underneath. I will clean up the dust with caution. Is it glue, or??
May be mastic with Asbestos, so be careful. Home test it. If it’s negative, remove however works best. If it’s positive, keep wet while you remove or just seal/ prime and ad new floor over. Research it!!
First, you can get asbestos test kits at Home Depot and send them off. Results come pretty quickly. Test the linoleum AND a sample of the mastic. If the lino has asbestos, you'll want to consider either sealing and covering it or having a professional remediation. If the lino is clean but the mastic has asbestos, you have several options- seal it or remove it WET. Lots of videos on the subject.
I have tar paper as underlayment for linoleum tiles we'd like to remove prior to refinishing the doug fir floors underneath. I can attest to the difficulty of removing this paper. Those who get it up w/ diet coke (which we tried) congrats. To you who made quick work of it with steaming it off, kudos (we used a steamer and a scraper blade, come on over and finish the job). 1800 watt heat gun w/ scraper works. (How's your knees and back?). Chemicals? (*LOL). I'll look into this tool but take certain precautions like having the paper tested prior to stirring things up. There is no one size fits all answer for removing this tough underlayment and still preserving the wood beneath. The only thing that can be said with certainty is, there will always be "experts" who are long on advice and short on understanding. Thanks for the video!
For everyone saying this is definitely asbestos… not necessarily. I found the same stuff in a house this old, and thinking it was asbestos, had it tested. It contained 0% asbestos. So just make sure you test, then proceed accordingly.
You are either lying, extreamly lucky or the Lab that was used was wrong, 99% of this black mastic glue and felt back tile contained asbestose all the way into the 80s.
@@FreedomFactory3D JUST GET IT TESTED THEN!! FFS
this is the whole reason I wrote the comment, all of you people posting are just trying to be finger waging karens. I know full well that most of the stuff has asbestos, but not all of it does. I wrote in my original post to get it tested.
@@flortristanw they always want a reason to judge! Just test it, so they can shut up!
Yup. We have this flooring in our house and had a piece of it tested. 0% asbestos. So asbestos-free flooring of this type does exist. The stuff is IMPOSSIBLE to get off, though. We've tried everything. Heat gun? Laughable. Scouring pads? Nope.
Please guy, number 1, you need ventilation. 2, goggles, 3, mask. I saw all that stuff floating around there. Take precautions, work smart.
Asbestosis isn't a secret. I've seen several videos on here of idiots ignoring the dangers. Lol.
As a PSA announcement, NEVER-EVER sand off Mastic tar on a house this old. The 1960s was the height of asbestos use in construction. If Mastic tar has asbestos in it, then it could contain between 15% to 85% asbestos. In the video you can see that there are fine particles in the air. He clearly does not have good safety precautions. Also the door is shut!!!!!!!!!
Exactly! It must be removed wet!
I used a walk behind floor stripper and took the mastic layer down as far as I could get then I sprayed the floors with a 1 vinagor to 4 water and let it sit for 15 minutes then take the walk behind stripper and it comes up very easily. I tried the method this guy is using and it was a much longer process and I could see it scratching the floor up something terrible
If you look closely, you can see all the asbestos fibers floating past the camera lens
I was wonder what the heck that was. OMG NOT GOOD!
He had it fucking tested
bro its sawdust that thing is like 40 grit. he had it tested
Is this a mesothelioma advert?
Might need one.
The lining felt and linoleum were laid with linoleum paste. Wet the the linoleum backing as pull the top of top of the linoleum. Wet the linoleum backing with soapy water. Wait about an hour and a half the water melt the dark linoleum paste. It will scrape right up with a three inch putty knife.
I've never seen a murder-suicide posted to youtube before.
Exact same thing in my home. Had it tested for asbestos and it contained none. You don’t know unless you test.
Was it black in color. Where did you get tested?
@@300zxdriver I also had a black tar like this tested by an abatement company. No % shown in the tar or the vinyl. Probably done between the 50s-70s. Testing is the only way to know.
PLEASE GET YOUR FLOORS TESTED BEFORE YOU DO THIS! AND ALWAYS WEAR A MASK!!!
Hey guys, so mine is yellow dried up glue. How do I get it tested for asbestos? I have not cleaned yet! Just lifted the carpet.
I removed my black tar paper with a wallpaper steamer. I think it was safer. Your tool make a lot of dust (and asbestos), not really good for your lungs.
Yeah this guy needs to go get a lung x-ray.
I would highly suggest wearing a respirator. I understand asbestos was incorporated into many types of linoleum. I used the same tool while removing the mastic glue from linoleum in my basement. You can see dust particles in this guys video. Yes the blades will hardly wear while shaving wood. Concrete, which is what this tool is for, will wear those diamond blades. Back and forth is the correct motion.
they do have concrete versions of this tool but the one I bought was designed specifically for hardwood floors.
Your right
Wow cant believe I've been in the flooring trade for 34 years now but anyway....Rest in peace to the occupants of this home and welcome to the world of mesothelioma and asbestosis.
Where is the follow up video that shows the finished project? Maybe you should invite RUclipsrs (particularly this one) to your home to enjoy your new floors :)
DiscGolfDiver there is a link to the finished floor in this video. :)
John Doe it was lab tested as mentioned in previous comment. This was asbestos free.
Whew, I tell you guys, I fought the black mastic and the black mastic won. If they made prisoners scrape this stuff no one would ever commit a crime again. At this point I'm just going to pay the professionals to nuke it from space.
I considered that several times during this project too :)
I just had the old adhesive to get up. Goop Brand hand cleaner totally dissolved it.
video was posted in 2014 i guess he knows about the asbestos now hope he is in good health
Black glue usually is aspestos!
That snowstorm you see is asbestos fibers.... Dear Heaven Above.....
That’s what I’m saying
I have this very issue going on right now! Your video gives me hope, thank you! My floor guy isn't as optimistic however. My fingers are crossed that he shows up with this very piece of equipment tomorrow.
Hi, Since you tried this a year ago, I'm wondering how it went. Did the tar paper come off without grinding down too much of the wood? Thank you in advance.
Very informative. Thanks for posting.
Love your tips and video. As a female though I couldn't handled the weight of a big sander and found that a wall paper steamer will remove the tar paper and glue with a wide hand scraper. The steamer also kept the fiber (asbestos concern) from floating in the air. I appreciate your video though. These old floors are worth rescuing but certainly are a labor of love.
I agree, whatever works for you is the best method. This happened to be my preffered method, but i could see that the steamer method would be better for some. Especially if your mastic contains asbestos. Labor of love is a great way to describe it! :)
+sendjoelletter. agreed, labor of love!pinnacle hardwood floors coming to long island N.Y soon!look for us in macomb,oakland,wayne countys michigan.God Bless All
Try a wallpaper steamer, it worked on our floors!
I used it too last year. Take a little time but definitly worth it (and seems safer too).
How did home Depot charge u when u brought polisher back. And dimonds where gone,and gunked up. Alot huh don't lie I know they charged u atleast 350 for damage
No only 70 bucks.... its a flat fee of 70 bucks to rent that pad thing... it dont matter if u rent it for 4 hours or a week...
I do floors and was looking for another video other than the philly floors. I'm sold now, thanks!
Please update us on the comments section of your good, the last video you posted was 5 years ago.
I used a buffer like that in the Navy everyday! I'm sure it will all come back to me very easily! I just have to see if I can find one around here because I have this very issue. I have been trying to scrape and I just cannot do this floor by myself scraping like that. I need to try to rent one of these somewhere.
awesome - I just finished a job that involved removing cutback - but in many cases, asbestos fibers were added to the cutback - that was how the tar held a trowel ridge. I have heard as many as a third of cutback floors that are out there have these nasties in them. Be careful.
Check out the dust in the shot at 3:45 when he shuts off the machine...
yes you are right, a lot of cutback did have asbestos. You should definitely get yours tested before taking on a project like this. Hopefully you will be lucky like me. My cutback was asbestos free.
sendjoelletter how did you test the adhesive for asbestos?? how much did it cost? also did you end up selling yours?
+Tom Rodriguez i just googled for a local company that does asbestos testing. there were 3 or 4 in my area. it was about $20 or so.
+sendjoelletter did you end up selling the Philly floor attachment? Definitely interested if you still have it.
Tom, sorry this reply was so late in coming. I actually do still have the philly floor tool. I never seem to be able to get around to selling it on ebay. If you are still interested i will see if i can throw up an auction for it.
What a mess! I would have burned the house down and started over. My hat is off to ya.
that "felt" from the old linoleum could well have been asbestos. sheet vinyl often had asbestos backing.
You are right, flooring products commonly contained asbestos. If you are doing a project similar to mine you should have all the layers tested by a certified lab as i did. Luckily mine was asbestos free.
Thankyou for the post. Very informative for DIYers. I've been in the floor refinishing trade for over 40 years and come across this scenario all the time. Once all the linoleum has been pulled back, you're left with black tar adhesive. At this stage, it's time to use a professional, 240 volt belt sander with 16 grit paper. "Rocks on Cloth". Sander is used on a 45% angle first, and all the adheshive is ripped up, goes into the dust bag, and not scattered about. A two stage, perpindicular, 45% sanding process clears the floor of all adhesive, and creates a level playing field before "with the grain" sanding can begin. The machine that you rented is excellent, but we use the same, hooked to a vacuum, and is only used for fine screening of the floor after all major drum/belt sanding is finished. Unfortunately, a professional 240 volt drum/belt sander is not available at rental outlets for obvious reasons. Kudos to you for having the patience in restoring your wood floors, and I'm sure that the end result was spectaculor! You've got a new floor, and increased the value of your home. Cool!
+Justin Ellis Oh man I need to talk to you! I do NOT have the black stuff.. all I have is a thin layer of yellow carpet padding suck to what looks like light "vinyl" glue. (The stuff I would use if putting down a vinyl floor)..
Jerry, If you take a look at the part of the video where i tip up the sander so you can see the attachment underneath you will see it is designed for what i am using it for and it is super heavy duty, not fine mesh. I think you are right though, the 16 grit sandpaper method might be a better choice for some people. I was really happy with the method i used, and it turned out great, but everyone has different needs in their projects. Thanks for your comments!
I would bet that my method would work for the vinyl glue. if you have concrete underneath the vinyl then they have a similar tool you can rent at home depot to remove old adhesives from concrete. Good luck!
Hey Jerry I was just about to post what you just said I've been doing this for coming up 50 years now and I'll bet you were referring to a Hummel. . If that is your machine of choice Hummel has an excellent maintenance and repair program that shows how to trouble shoot and adjust the machine. When I went through the NWFA certification they had a Hummel tech as a bonus come and run a 2 day seminar which was great. It was well worth the money and time. I 'll bet also you have about eleventeen kinds of 3 and 4 prong 240 volt plugs. It sure would be great if they would use one standard size plug and in every new house with wood floors (REAL WOOD) it would be code to install a standard wood floor guy 3 prong plug in the laundry room 3 feet off the floor not behind a dryer This trade is not easy but very rewarding to see a smile on a home owner's face when they look at a 100 yr old floor restored to what it looked like when the house was first built. One advantage we have as trades men is no DAMN computer is going to come out and replace us. I tell people all the time this is more of an art than a trade.. Maybe some day they will make a sander with sand, light sand, and finish sand push buttons but they will still need some one to carry it in the house and plug it in. Have a great day..
Great video, we're tackling a similar project & you definitely saved us a lot of time. Thank you!
As far as asbestos...who should be called to test for it?
its snowing in your house bro
That’s the asbestos flying around
you must have microscopic vizion papi@@streetgainer
Asbestos alert. Both the tar AND the felt. Dry sanding it is the worst thing you can do... But I am jealous yours came up 10 times easier.
Barbara Kinzle, not all mastic contains asbestos. I had mine tested by a certified lab. Luckily it was asbestos free. Testing is relatively inexpensive (about $20 for me). Everyone should get a test done before tackling a project like this.
sendjoelletter I haven't had mine tested... but I am treating it like it's asbestos. Keeping it wet, fans on, respirators on, etc... But I'm kicking myself anyway.
He said it was from the 60s and linoleum, I doubt it was linoleum mastic, it was what they put the vinyl or linoleum on top of .
It's called cut back it has asbestos, so does flooring from the 60s and 70s.
He has contaminated his whole house by sanding.
If Home Depot told him this they should be sued.
He most likely picked up asbestos and got it in his AC system or central heat.
This is unbelievable truly.
@@1234tellmewhatyourlookingfor how do you know its not linoleum mastic?
Was that stuff really sticky? Do you think this would work on a glue residue? Someone stuck stick on tile on a hardwood floor and left a very sticky glue residue on it after I took the tile up. Thanks
There appears to be a suction hose for a vacuum hookup on the machine. Did you use this? I wonder how affective this would have been for dust control if that is its intention and also how practical to use this feature?
i tried hooking it up to my shop vac but did not seem to help with the dust, and i took it off. probably because this tool keeps it higher off the ground than most floor polisher attachements.
I`m currently dealing with tar and tar paper, I`m /We are heat gun and scraper to remove tar paper then hand planer then carbide blade on angle grinder then belt sander but the floors are worth it
The
Most if not all cut back has asbestos in it
Sendjielleter, thanks for replying... one more question, does the machine really nick the floor up badly?? How much sanding did you have to do? How far do the blades go into the floor?I am just trying to picture the machine in my head.. which I am sure I have it all wrong! Lol
Jennifer Strausser the blades don't dig in, they just work like really heavy grit sandpaper. they aren't sharp at all if that makes sense. they are very dull but have rough grit glued to the tips and you get the same amount of scratches you would get from normal 40 or 50 grit sandpaper. it's nothing you can't sand out.
I needed this 10 years ago, damn.
Thanks your stars, you just avoided the cancer bullet!
I rented the same machine with not luck. The disk underneath would not even turn and it would shuts off the breaker switch in the electric box.
bummer dude. A licensed electrician might be able to help you upgrade your breaker, or install a new circuit with higher amperage.
Old video but why didn’t you use any mastic remover liquid, this video is an example on why you shouldn’t remove mastic when it’s dry🤣
You good bro?
Thanks for posting!
We are fixing to do this again to an old floor.
I’ve done the hard way b4 slow...getting all that black mess off...
i hope this dude is alive and well
So then you sanded the floor after you used this tool? Yes? Did this tool dig into the hardwood?
Paul Bock yes i sanded the floor after. the block shown in the video was rated as 50 grit. It made a couple of dig marks in the floor but it was surprisingly great in that respect. i sanded with 60 grit, 80 grit, 100 grit, and 120 grit. You could probably get away with less though. I spent most of my time with the 60 and 80 grit. there were some deeper scratches from the 50 grit block that took some time to sand out.
thanks, i have the same issue.
I had the same problem as this floor, I heated my iron put it on steam placed the iron on a towel turned it up with the steam after a minute I pulled back the towel and scraped off the tire, it workes.
that is awesome. I am glad that method worked for you. I say whatever is easiest for you, should be the way you do it!
TSP or TSP substitute, 20mins, and mine just wiped away in a gunky slurry.
Asbestos?
He had it fucking tested
EPA sees this, you’re done.
The tar glue has asbestos in it, I just had mine tested and abated. The only good deal you having going for you is it has between 5% to 7% asbestos in it.
@Jessica James Someone replaced the original hardwood floors in my house with parquet sized solid wood tiles, glued to the concrete subfloor with that black tar mastic. It's 3/4" thick in some areas- definitely a DIY fail. Had it tested and it is the asbestos kind so it must come up wet. Estimates for remediation are between $12k and $23k. (Gasp!) Spoke to EPA, it can be safely removed if it's removed WET. Absolutely DO NOT try to grind or sand it!!! Found a low VOC chemical that's getting it done, but it's labor intensive and takes awhile. One room at a time, I'm getting it off. Kitchen is done, working on dining room. Have to keep pets out of the room while I do it. Just make sure you take it up WET. Shop vac and lined buckets help. 🙂
@@julietmurphy8637 did you remove all already? did you removed the flooring wet ?
@@leosotelo5119 I have finished 2 rooms, 2 more to go.
@@julietmurphy8637 thanks for the reply. did you get it tested before taking out the old flooring? we were remodeling our home and we took out carpet and flooring in the kitchen take hard tar mastic and under that it had thin hardwood vinyl with more mastic under that. i didn’t think it was asbestos till i went online. now i’m depressed and scare😞
@@leosotelo5119 Yes, I got it tested. I bought kits at home depot, put a sample in the container, and mailed it to the lab with payment. Results come back pretty quickly. I am using Sentinel SC-170 to take it up wet. You can find it online and look up youtube videos. Don't be scared, just be smart. And make sure whatever you're wearing to do it can be thrown away.
Thanks! How long do you think a 11x13 room room take to remove the mastic?
Does anyone know where I can purchase this product? Thank you
in macomb oakland or wayne county michigan.Call Pinnacle hardwood floors of grosse pointe!God Bless All!
God bless? WTF?
Thanks for taking the time to post, this is the solution I needed for a crusted yellow dried up carpet glue adhesive on hard wood.
How long did this take? And what did you use? I have a house built in 1840 with cheap flooring glued onto the original hardwood flooring... Trying to bring the hardwood floor back. Any and all help would be appreciated
ok...now that i am closer to wanting to get my job done and ready for renting something, i have one more question for ya... i promise this will be the last one(but i dont want to say ever, never!lol) so i decided to watch your video again, you said this was a floor polisher from home depot?? do they have the blades that you buy seperately at home depot...and how much are the attachments, thanks again for being responsive to my questions..my floor is going to look exactly like yours as i did a peek under one of the cabinets, and damn if i feel like spending a a few months, killing every weekend with a ten hr day trying to steam this crap off!! thanks again
Jennifer Strausser sorry for the late reply! Just noticed your question. Home depot has a similar tool head for the floor polisher but unfortunately it's meant for concrete (at least that was the case for my local store). The only place i could find the tool designed for wood floors was the place formerly known as the philly floor store. It's been a few years since my floor was done maybe home depot rents the correct head now. It would be much cheaper to rent than buy based on the concrete style head. If you're having trouble i can send you the exact name and model number from mine (which i still have).
sorry it took me so long to reply. I wasn't getting notifications of comments for some reason. Maybe you are already done with your project by now, but if not here is the link to the place i bought it. I used to be philly floor store, but is now called, city floor supply. www.cityfloorsupply.com/?page=item%20detail&itemcode=PFSMABUFFER15MASTIC-WOOD
the floor polisher i did rent from home depot. so in other words, buy the block sanding attachment seperately. then rent the polisher from home depot. they do sell replacement blades at the link above as well if you should need them.
This worked incredibly well; thanks for the video!
This is EXACTLY what I needed! Trying to figure out how to restore a beautiful floor (not sure what it's made of) that was covered by this and two layers of carpet.
Please do not sand or grind black tar mastic, you'll have asbestos particles in the air! It needs to come up wet. There are low VOC, pro grade solvents for this
2 layers? WTH haha
Try going slower and letting that buffer do its job
What would be best to use on stairs
There is a chemical spray that melts that tar and adhesive Its called Black Jack tar and asphalt remover. You can get it at lowes or home depot . Its made to clean your hands and equipment and tools when you do taring work on roofs. Ive used it to clean my hands and it literally melts tar away in a few second. You can use that on stairs .Just spray it on then scrape it off.
Here it is
www.walmart.com/ip/Asphalt-tar-Remover-12-6-oz-Orange-Sol-21943/45822394?wmlspartner=wlpa&selectedSellerId=795&adid=22222222227033130931&wl0=&wl1=g&wl2=c&wl3=76978220471&wl4=pla-133675673831&wl5=9012480&wl6=&wl7=&wl8=&wl9=pla&wl10=112562476&wl11=online&wl12=45822394&wl13=&veh=sem&gclid=EAIaIQobChMIuPDQ8pOu4AIVl7jACh1J-gdXEAQYBCABEgI3dfD_BwE
@@rbeck3200tb40 Thanks alot.... much appreciated!!
@@rbeck3200tb40 can I use it if the wood is peeking through the tar? Will it ruin my floors
@@ninalahy1207
I think you can use it on wood.
Mineral spirits works well on that black glue
How many times did you have to change the sandpaper?
This tool has sanding blades, not paper. Believe it or not, i didn't change the blades at all. They are extremely durable.
not helpful. i have the tar adhesive on the concrete foundation. it is sticky and need a way besides gas to remove
There is a aluminum plate that has 12 carbide bits on the bottom of it and is called a Hex Pin Plate and fits on a standard floor buffer like in the video. . It is made by Pearl Abrasives., and may be rented at Home Depot. and does a stellar job of removing adhesives from concrete. It's design keeps it from loading up like sand paper or the Dia Ma tab in this video. However once the bulk of the adhesive has been scraped off , the Dia Ma tab plate like in the video does an excellent job of polishing the concrete too like new condition. As far as the asbestos goes the fibers are encapsulated in an adhesive base not like the free form asbestos used in insulation and pipe wraps. People who have suffered from exposure to asbestos were working in an asbestos concentrated environment daily for many years. The small exposure to taking up a floor once in a life time is not going to give you lung cancer and make you die the next week. Another solution is to use a nom-flammable adhesive remover like orange citrus stripper. You pour it on the floor and leave it in a puddle for a few minutes then use a rubber squeegee and move the puddle to another section of the floor when you have removed most all of the adhesive and now you have a big black puddle on the floor wondering how to get it up , get some dry clay based cat litter or oil absorbing compound and pour it all over the puddle . It will absorb the mess and be scooped up without the liquid running all over. Any residue may be cleaned with hot water and detergent. DONOT use clumping cat litter. After the floor is dry you can over it with a sanding disc or the plate shown in the video. I have taken a lot of these floors up and as a former Instructor for a major floor covering manufacturer , 45 plus years in the floor business the methods I just described seem to work the most efficient and the quickest with least amount of clean up. Hope this helps you on your project.
captain757747 - thank you for sharing your knowledge and experience with us !
Awesome!! Thanks so much for sharing.
Did you ever sell this piece of equipment ? I want it.
I haven't yet. If i do i will comment on all those interested with the ebay posting. Hopefully i can dig it out and sell it soon. It still has plenty of life left.
U can rent them at home depo
Have you completed removal of the mastic?
+Melody Le Yes it is complete. Here is what the completed project looks like: ruclips.net/video/pYim5Ynro_U/видео.html
How did you do the corners ?
Foad Mozaffari
The corners were extra work. I rented a special hand sander from home depot that is made for corners and used a lot of 40 grit sandpaper.
There is a special scraper made to get into corners . If you can find a wood floor refinishing supply house they will have one It is made by Red Devil has replaceable blades and has to be sharpened often with a mill file. You can go the sandpaper route but with a little bit of elbow grease and this scraper you can do all the corners in a room in about 10 to 15 minutes verses hour or more with a sander, changing paper every 5 minutes. Beauty of the scraper no paper change or cost. I am a Master floor Tech been doing this for 45 plus years. Sort of got the hang of it now.
sendjoelletter hey Joel, ripped up old linoleum on a corner of the kitchen last year and my heart sank when I saw the black tar. As the floor is virgin northern hemlock (not a single blemish or knot anywhere) I’m about to dive in. House is around two hours from any town so rental would be a TON of driving. The structure is unheated in the winter and ambient temp can be around zero. Question: you mentioned that temp makes a big difference. Do you think at that very low temp a very course sander may be also effective as the tar would be hard as rock? Thanks in advance!
I would be very interested in buying this tool. I am removing adhesive from two large rooms in an old house. Let me know if you still have it. I did check at the Philly Floor Store but would prefer to get one a little cheaper if possible.
give me a couple of days and i will post this on ebay or amazon and send you the link
ok thanks
Also, did this create any dust?
Paul Bock yes it did. there was A LOT of dust and it took some cleanup after.
How much where your costs?
the tar removal tool was about $300 plus shipping from philly floor store. The tool rental at home depot was about $30.
Lay towles on the floor and pour diet coke on them, go eat a sandwich, come back and that will come off the floor like butter
Does that actually work?
@@BJ-cp8fj yes. I found it on RUclips, unfortunately i cant find the video. If you ever find yourself in this situation just grab a small towel and do just one little spot on the floor and see for yourself. I was a little exaggerated with the sandwich part......lol you should wait about an hour before you remove the towel. But this saved me much time and it wasn't that bad of a mess to clean up
@@BJ-cp8fj and it was diet Pepsi i used, not diet coke.
Your about 40 yo? You might make it to 60
did your wood scratch up or anything
Yes it did leave scratches, but... the block shown in the video was rated as 50 grit. It made a couple of
dig marks in the floor but it was surprisingly great in that respect. i
sanded with 60 grit, 80 grit, 100 grit, and 120 grit. You could
probably get away with less though. I spent most of my time with the 60
and 80 grit. there were some deeper scratches from the 50 grit block
that took some time to sand out.
have you sold this disc yet?
U rent it from home depo
R.I.P
That is what we in the flooring industry refer to as "cutback" that contains asbestos 99% of the time. I would never attempt this, after him saying the lino was from 1960, it is definitely ASBESTOS cutback! He should be wearing full PPE gear including cover alls, shoe covers, respirator as well as eye and ear protectors. You should have the entire area surrounding this masked off air tight with sheet plastic to keep from debris spreading throughout home. I feel bad for people that try to save money doing this while exposing yourself and your family to ASBESTOS! NEXT TIME CALL A PRO AND TEST THE GLUE! BLACK GLUE IS CUTBACK AND ALMOST ALWAYS CONTAINS ASBESTOS!
T
Doesn't look like it's working
the bare wood behind me says otherwise :)
Doin same. How did it turn out
Wet the surface and let it soak and it can be wiped off.
@@LUCKYLADY000000 Wipeoff linoleum glue?? Interesting..what chemical did u apply to it for this to be possible
@@FromTheHood2TheWoods no chemical. Just water. It's the soaking. I let it set for 30 min to 1hr. It turns to mush.
LUCKYLADY000000 there’s no way we were using a powered chisel floor scraper the glue is hard as a rock. U sure just water will do that. Maybe mine has a different kind of glue. It’s like yellowish orange brown
@@FromTheHood2TheWoods mine was black with a grey paper on top. You might have a different adhesive on yours.
Best to leave the floor and put new on top, or remove subfloor with linoleum and start fresh.
Um... Asbestos?
Not with mine luckily. I had it tested before starting this project. It was asbestos free.
everybody scared of asbestos, yet they probably eat carcinogenic chemical food everyday. lol
Great video. Think it would work the same on removing glue from glued down rollout vinyl?
Asbestos in that
I can literally see the asbestos fibers FLOATING in from of the camera, like are you kidding me?!?!
Yeah, that needs to come up wet.
Asbestos😰😷😬
Gasoline will take that tar right off, or charcoal lighter fluid.
CJ Laity but it would also ruin the wood :-/
@@erikness17 -- no it wouldn't. I did it on an entire bedroom floor. Didn't ruin anything at all.
Yeah, but don’t light a match!
Would kerosene do it also?
Also how would I use it please. Thank you.
The best way is to not disturb it.
Encapsulation is needed with a cement polymer based compound
John Moore Doesn’t work if you want the whole floor to be equally on the same level and flow
is that a trailer floor?
Do you still have the cut back removal block?
D Law Yes i do. Do you want to buy it? It's in great shape and has lots of life left. the floor that had cutback was only about 400 sq ft, so there is a lot of life left in the blades. I will give you a good price.
No worth it. That floor will never be any good. Take it all out and install new wood flooring.
Asbestos!
Another youtube video showed using old damp towels laid down on the floor, then pour diet Coke on the towel, let it set for 12 hours and the goo pulls right up. I tried it but could only go two hours...it worked better than expected. 12 hours might do the trick.Plan to try it this weekend for 12 hours
How'd it work out?
@@dorantana1 It doesn't.
Look at the dust particles in the air I feel bad for this guy stupidity gets you nowhere