Dustin seems like an awesome quad butt I do not like that the circuits is showing I prefer having a shell to cover that but other than that it seems like a great drone can't wait to see you test it out
Dustin, can you tell me which battery to buy, I need to buy it with some extra batteries, and a good charger if there is none provided. Can you also give me a link for a less expensive google to use, that link is discontinued? I found This one AOMWAY Commander V1 FPV Goggles - NO HEAD TRACKER , what is Head Tracker? Will really appreciate.
Hello there, pretty honwst, Nice and detailed review. But i want to ask you for your suggestion for solution of Problem with a floureon 250 that i got yesterday. The DOA display doesnt turn on properly. It just shows like few wide stripes, which have either Black color or shades of gray. Thanks for any Halp, i Really need some right now ;((
I don't know if it will be strong because if you have seen the video rotor riot did in the eachine racer 250 they crashed it into grass from about a metre and the one of the arms snapped of and was left hanging
+ivan sikaleski They were probably trying to fly it like a pro racer. This is more for beginners to intermediate. You'll see in my flight test soon... I crash into trees, grass, chain link fence and roof with no real damage :)
Dustin Dunnill and my friend had a eachine racer 250 and the range was really low it was only like 25 metres and then it fell out of the sky from about 2 metres onto grass going about walking speed and the top right arm snapped
+ivan sikaleski something must have been wrong with his. Did he spread the antennas up like o did here? I had no range problems all around the perimeter of the park 400+ feet. He had bad luck I guess. You'll see how strong mine is when I slam it ..lol. Guess if you slam it just right anything will break :)
Hi. I'm a bit confused. First you said the back motors would spin in towards the back although then you said the black caps spin clockwise. Which one is it? Thanks. Also, the switch does not turn on my lights like yours does. Also, in the included charger, cell 3 does not light up. It did when I first received it though. Now it does not. Thanks for the help.
+Dre J One rear motor will spin clockwise and one counterclockwise.. therefore a nut for each tightens the opposite direction of motor spin to stay tight when motor is spinning. Not sure on your lights..sorry.
Chris Weber Did you plug the battery in and power up the drone before putting the antenna on? If so you may have fried your video transmitter. BTW check the shipping label and make sure they did not send you one from their returns department.
I just got the rtf version. I'm trying to figure out how to charge the fpv screen? please help. + 3 of the 4 motors were DOA? when arming all but 2 motors would spin up, the 3rd motor would sometimes spin up. the front right motor is the only one that seems to be okay for now. the ring on the bottom of the motors seem to be damaged or loose. Had this for about an hour now and have been attempting to get a replacement shipped out to me. so pissed rn
+Tech on Demand There should be a charge adapter with a red just on one end. Some motors may not spin unless its actually trying to fly. Spinning motors up on ground may only spin some as it is trying to find level. Try get it up off the ground with some throttle
i have the cable that plugs in to the screen with the red plastic end. the jst calble. but where do i plug it in? on the controller? or am i missing the charger for the screen?
You should be able to get them from the site linked in description or ebay. The eachine racer 250 is essentially the same quad so you could use parts from that also.
nice inspection and unboxing ! I'm loving my floureon it's a really nice package
Awesome video. Very nice looking quad. Looking forward to the full review video.
Dustin seems like an awesome quad butt I do not like that the circuits is showing I prefer having a shell to cover that but other than that it seems like a great drone can't wait to see you test it out
Dustin just love anything Quad racer's im so big into them at the moment....Great Vid dude....
+Heath Hunter thanks Heath. This was was a blast to flight test...up soon :)
Just ordered one of these. What would be a good reliable, inexpensive battery that will fit and maximize performance?
great video sir! specially if it comes with no instructions for when I get mine. thanks
Thank you.
nice review...can't wait to see the flight review...
Yet another great revue.
+Don Mason Thanks Don!
+Don Mason Thanks Don!
Dustin, can you tell me which battery to buy, I need to buy it with some extra batteries, and a good charger if there is none provided. Can you also give me a link for a less expensive google to use, that link is discontinued? I found This one AOMWAY Commander V1 FPV Goggles - NO HEAD TRACKER , what is Head Tracker? Will really appreciate.
Dude!
Leave the dang plastic on! lol I'm one of those who keep the plastic on some of my electronics until it falls off or gets in the way.
Hello there, pretty honwst, Nice and detailed review. But i want to ask you for your suggestion for solution of Problem with a floureon 250 that i got yesterday. The DOA display doesnt turn on properly. It just shows like few wide stripes, which have either Black color or shades of gray. Thanks for any Halp, i Really need some right now ;((
is the floureon, the eachine, and the hobby people Batfly all the same thing?
hi I'm looking to buy one of these but I don't know how to charge the monitor. do you need the buy something for that charger?
I don't know if it will be strong because if you have seen the video rotor riot did in the eachine racer 250 they crashed it into grass from about a metre and the one of the arms snapped of and was left hanging
+ivan sikaleski They were probably trying to fly it like a pro racer. This is more for beginners to intermediate. You'll see in my flight test soon... I crash into trees, grass, chain link fence and roof with no real damage :)
Dustin Dunnill and my friend had a eachine racer 250 and the range was really low it was only like 25 metres and then it fell out of the sky from about 2 metres onto grass going about walking speed and the top right arm snapped
+Dustin Dunnill do you know where I could find a backpack/case for the hubsan h502s
+Joshua Phillips the link on description has a 501s backpack which should fit the 502
+ivan sikaleski something must have been wrong with his. Did he spread the antennas up like o did here? I had no range problems all around the perimeter of the park 400+ feet. He had bad luck I guess. You'll see how strong mine is when I slam it ..lol. Guess if you slam it just right anything will break :)
Mine's ESC blowed up.
Do you have a link for the 3D printed antenna mount?
Can you make tutorial how to make cheap-budget racing quad?
Not just a re-brand, it is running a different flight controller.
+Tom von Trott Your right and it fly's solid with the stock RTF tune. Had a great time with the flight review which I'll have up soon :)
+Dustin Dunnill and I think the escs are blheli 20 amp and on the eachine they are simonk 12 amp so the escs are better as well
Hi. I'm a bit confused. First you said the back motors would spin in towards the back although then you said the black caps spin clockwise. Which one is it? Thanks. Also, the switch does not turn on my lights like yours does. Also, in the included charger, cell 3 does not light up. It did when I first received it though. Now it does not. Thanks for the help.
+Dre J One rear motor will spin clockwise and one counterclockwise.. therefore a nut for each tightens the opposite direction of motor spin to stay tight when motor is spinning. Not sure on your lights..sorry.
I can't get a channel on my fpv screen. Also the tx antenna gets hot at the base where it screws into the drone? HELP
Chris Weber Did you plug the battery in and power up the drone before putting the antenna on? If so you may have fried your video transmitter. BTW check the shipping label and make sure they did not send you one from their returns department.
I just got the rtf version. I'm trying to figure out how to charge the fpv screen? please help. + 3 of the 4 motors were DOA? when arming all but 2 motors would spin up, the 3rd motor would sometimes spin up. the front right motor is the only one that seems to be okay for now. the ring on the bottom of the motors seem to be damaged or loose. Had this for about an hour now and have been attempting to get a replacement shipped out to me. so pissed rn
+Tech on Demand There should be a charge adapter with a red just on one end. Some motors may not spin unless its actually trying to fly. Spinning motors up on ground may only spin some as it is trying to find level. Try get it up off the ground with some throttle
i have the cable that plugs in to the screen with the red plastic end. the jst calble. but where do i plug it in? on the controller? or am i missing the charger for the screen?
how do you power up the fpv screen
how can record video?
Where is part 2 - he disappear?!
When charging the monitor were douse the red end go into
hi, can use 4s akkus?
Good channel☺
where do you get parts?
You should be able to get them from the site linked in description or ebay. The eachine racer 250 is essentially the same quad so you could use parts from that also.
lol, there is a lollypop on top of the drone :)
Which better,floureon or eachine 250?
+Vladimir Vladimirovič Putin
why?
Gail Raby why not?
I know this question already been asked but can someone explain how to charge the FPV screen?
Need separate battery for fpv
Chris Pearson For the floureon FPV, it comes with a JST plug but nothing to connect it to the charger. And thanks for answering
dude. floureon. like neon. not floureen. lol.
+theburg 530 lol..I know. I corrected saying it in my flight test which will be up soon.
haha it was pretty hilarous. i cant wait to see the flight video. ive been tempted to buy one on these ones.
Firs :D