Charge any Battery with Control Module DC 6-60V XH-M604
HTML-код
- Опубликовано: 10 сен 2024
- #electronic #solarpower
This is XH-M604 Battery Charger Control Module. This module can handle DC 6 volt to 60 volts. You can use this charging module to charge Lithium Batteries.
Get Module : s.click.aliexp...
Fork Wire Connector : s.click.aliexp...
Crimp Terminal Connectors: s.click.aliexp...
Specifications
Input Voltage: DC 6-60V
Display Accuracy:0.1V
Control Accuracy:0.1V
Output Type: direct output
Voltage Tolerance:±0.1V
Apply For:6-60V MAX 80V battery
Dimension:81*54*18mm
Use: In the setting voltage value, start button play button raised, about stop button role to down key
Settings
1. Set the start voltage:
long Press the start button, digital flashes, by start and stop button, set the start charging voltage value.
2. Set Stop voltage:
long Press the Stop button, digital flashes, by start and stop button, set the Stop charging voltage value.
--------------------- ABOUT SetNFix RUclips CHANNEL------------
This is SetNFix RUclips channel. If you are an #innovator, #DIY #lover or do not want to waste your time at home, this is the channel you should #watch. You can watch #Arduino Projects, #Electronic Projects, #Car repair #tips, #Computer Hardware and #software lessons, #iphone tips, #Android tips and much more.
Sign with this link and get 19 USD free
Contact : WhatsApp : chat.whatsapp....
Aliexpress : a.aliexpress.c...
Nano With the bootloader s.click.aliexp...
ATMEGA 328 s.click.aliexp...
100pcs 5mm LED s.click.aliexp...
5pcs Relay 12v : s.click.aliexp...
12x18cm single Side Prototype PCB : s.click.aliexp...
Buy head unit with 55% discount : s.click.aliexp...
Car Cigarette lighter connector with 15% discount : s.click.aliexp...
Car Headrest Unit Display with 16% Discount : s.click.aliexp...
2Din car radio player with 50% discount : s.click.aliexp...
Portable Car Steering Wheel Wireless Controller with 24% Discount : s.click.aliexp...
Waterproof Car External Receiver Antenna Repeater 45% discount: s.click.aliexp...
Car Dash Cam 1080P LCD Dashboard Camera 2.2" 50% Discount: s.click.aliexp...
You can follow us on
Earn Crypto Currency at home : cryptotabbrows...
Blogspot :setnfix.blogsp...
Website : www.setnfix.com
Arduino : create.arduino...
FaceBook : / setnfix
Hackster : www.hackster.i...
Reddit : / setnfix
twitter: / setnfix
kakao : story.kakao.co...
Arduino : • Arduino Projects
Electronics : • Electronics
Automobile: • DIY Car Modifications ...
If you have not SUBSCRIBED my channel, do not forget to subscribe, like and share my videos
STAY WITH SetNFix
------------------------------
Ascension by ZAYFALL / zayfallmusic
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/3ucF6mg
Music promoted by Audio Library • Ascension - Zayfall (N...
------------------------------
![[DOKKAN BATTLE] Worldwide Campaign Announcement Video Part 2!](http://i.ytimg.com/vi/JpT5Voak6WA/mqdefault.jpg)
thanks for Ur review master❤️❤️👍
So if i use this circuit there will be no issues if i will leave my charger on 24/7.. because i will be using this to power my 12 v alarm system in my vacation house...and sometimes it takes months before i visit my place...thankx
Yes. If you adjust the circuit correctly, no worries.
If i give 20v input from solar. Can i charge a 12v battery with this module? I mean, can this module step down the solar voltage?
NO, If the battery is 12v, give around 14.2 volts.
Does it also work as buck/boost convertor or do I need to supply exact voltage? May my supply voltage fluctuate? Thank you
no boost or buck. you have to use sufficient voltage are you required to charge the battery.
12V Battery directly charge by 100W 18V Solar Panel ?
Very nice , i need for 48 v to 72 volt battery how many amp can this hundle without burning up please let me know , its for e bike battery
This is for max 60V 30A
i have issue with this control module i test the battery in multimeter it shows 12.8v dc but then when i connect to the control module it shows 13.9v dc does anyone give the solution how to calibrate the display of control module?
It is normal to show the voltage is higher than the module on multimeter. But this is un usual.
Using this I could use the alternator from my car to charge a smaller battery (like one in an APC) without the risk to overcharge the smaller battery ? Would this prevent ocer discharge too ? I suppose a battery isolator is require too ?
There is no discharging system. But once the battery is fully charged the power will automatically be cut off. Therefore, there is no issue about overcharging.
So, this is 2 point charger. What is the coil good for and the IC under the heat sink?
The IC with heat sink is a voltage regulator LM 2596. The coil is used as an inductor. Those are used to pass the smooth current through the circuit. Inductors are also useful in removing noise due to their ability to keep out high-frequency AC.
Hi my friend. I have a question I hope you can give some of your good advice. If I want to use this in my solar setup, where should I connect the line for the power source? Is it going to be connected to my solar panel array? I want to use this because my battery keeps overcharging specially during high noon. Thanks
do not directly connect this with solar. This can be used to charge the battery using power supplies. Use solar charging controller and set the correct settings to stop charging voltage then the battery will not be over charged.
The LED remains light up after disconnect input supply. Also it continuesly used battery (consumes battery) when not connected to input supply. How to connect led that only light up when inserting input supply and led off when remove input supply on the module?
It is required to connect the battery with circuit to detect the voltage level. Then only the circuit can detect the voltage is lower than the minimum voltage. The LED is just and indicator, if you do not want it, you can remove it.
@@setnfix already removed it, So how to connect led in between the relay (led light up when insert input supply from charger.)
@@octamy-qn8hl use a relay for the purpose..
Can I connect adaptor first? My adaptor voltage is 19 volt.....does it decreases voltage 14v or 12.6v?
No. you can not regulate the voltage using this module.
@@setnfix then what is use of this module tell me sir...
Solar panel also gives 19 volts, then it will not decrease voltage? Then how will it charge my 12v battery?
@@setnfix We can give it 6v to 60 volt ..means it can regulate voltage
@@arpitsingh5152 This thing will only output same voltage you feed it then cuts off power when it reaches max or drops below minimum. What you need is a step down buck converter.
Can I connect this circuit with the mppt 60 ampare controller ?
yes. but limit the current to 30A
@@setnfix Thanx bro
@@rizwanahmed7236 👍👍
I don't think the circuit can handle 30amp the tracks is too thin at the bottom from the relay it will probably burn out
NO, I am using 30A power supply to charge 120Ah car battery. There is no issue.
@@setnfix I'm waiting for the next video that's charging a battery with high current..(max 30A) 😉
When i connect battery to the module. My battery is discharging quickly. What the reason?
It takes only small current to keep standby the unit. I think there may be a short .
@@setnfix Can we use the module for a lead-acid battery?
@@sridharv5969 Yes, I am also using for 120A/h 12v battery (now more than 2 years)
@@setnfix can we use led acid battery?
@@sridharv5969 same question i think
hi, can I connect the module to a dc genarator to charge the battery? is the dc generator able to charge it? thanks
It is based on the battery current and the voltage.
@@setnfix how can I increased the current of my dc generator?
Can we modify this module to charge 60v battery. , that is upto max 72v cut of voltages.??
I do not think so. Since this is a pre programmed one, we can not change. But you can hack with few modifications.
@@setnfix thank for confirmation 👍
Can i use it in 6volt lead acid battery???
Yes. you can use 6v to 60V
Will it work as under voltage protection?
You can convert it.
Does it automatically set current and voltage of charging battery?
No you have to set the cut off voltage and re charging voltage.
@@setnfix I will set a voltage limit of 12.50 volt, but what if current is 5 amps but I need 2 amps for charging?
@@arpitsingh5152 You need the 10% of current of the Ah of the battery. check this video how to control the current and voltage ruclips.net/video/9ousokeK9lA/видео.html
@@setnfixdoes this module work with Lithium ion battery?
If I use Solar panel of 50 watt then it will give 20v..
Lithium ion battery need 12.6v something to charge
Then will this module convert 20v to 12 or 14 volt for charging?
Can I use this module for AC DC fan 15 volt step ? Battery?😊
Yes. You can use max up to 60V, 30A battery
@@setnfix ni mere pass 20 ah ki lithium battery Hy 18650 wale
@@setnfix I have 30 ah lithium 18650 cells battery 12v
@@setnfix car I use this module for battery step up to 15 volt the I supply 15 volt my ac DC fan for speed up can it work for this
@@sanaimtiaz8635 you can charge your battery through a power supply.
can i use this to charge car batteries?
yes you can
@@setnfix thank you.
Is this a boost charger? If my panel is 30V, can I charge a 60V battery?
Not engouh as if you charge a battery 60v, you may need power more than 60V.
48v & 51.8v lithium battery can charge with giving voltage below 60v.👍
@@technicaldada5384 Yes
Can I charging 12v 150ah battery
150Ah battery needs 15A charger. yes you can use up to 30A
can I charge 3.7v 18650 battery with this module?
no. this module can be used minimum 6volts
Where can we find it?
s.click.aliexpress.com/e/_Dl6z5vt
12v 5 battery use Serees
60v 40ampare use battery charging is perfect?
60v battery but use perfect or no?
normally it is recommended a charger with 10% from the Ah of the battery. This relay can handle only maximum 30A. If you want more, use a automotive relay like 80A
Can input 46v solar panel directly ?
not directly, you have to use a solar charge controller.
Is the car battery 12v 80a also available?
yes, you can
Can I set 58.4 cut value in it ?
yes
and you are using it with sealed lead acid battery
You can use this for car battery as well
Good video but why use the A I voice over. It's now hard to understand. I wont be subscribing. It sounds like I'm listening to British Telecom. Press 1 for this press2 for that etc. The visual part was very helpful though.
Yes I know. In order to add voices, I have to get some more educements. Else, the sound will not be clear. I am trying to buy a good mic. Thank you. :-)
Schematic
This is a complete board.