The hand stop was affordable? U crack me up! I just bought knights micro irons for the first time - I’m giddy with joy... and they were only 55$! I’m in love.
I got a KAC SR 30 and I have to say out side the initial gut feeling on my checkbook. I love the gun, it's better than than either my Spikes or Wilson Combat AR 15. It's like a peice of art in gun form.
Gun Porn Media Just curious why you traded out the 16in for the 14.5, Did the 16 in Mod2 not perform well suppressed or other reasons? The reason I ask is that I am looking at suppressing my 16in Mod 1.
Check out what HM Defense has done with the issue of the cam pin, and have a look at their gas block system, it’s milled out of the barrel stock, it’s not attached, it’s physically part of the barrel. Truly brilliant engineering
I have one of those and in the process of building a MOD 1 pistol. Threw on an ACOG and a mams brake. The mams brake makes a considerable difference. Also trying out a JP silent capture spring for fun. I actually prefer the QD end plate from KAC that comes with it. Mine also came with the CTR stock, swapped it for a B5 Bravo. I find the trigger to be similar to a Geissele SSA but slightly less refined. Can't fathom putting grip tape on any rifle let alone a Knights, but everyone has their own preferences. Thanks!
Hey man saw you had a gap between the rail and upper receiver. Makes me feel good because I had the URX 4 rail installed on my Colt upper and it has a gap as well. Been looking around the internet and I guess that’s totally normal due to the rail screwing on.
M Nohcho aftermarket plates are why I use gen2 over gen3. Reliability is fine don’t think you can go wrong either way. However Gen 3 seems to run better with HK and Scars
AJ R I guess if you’re gonna change out the floor plates a gen 2 makes sense. That’s the #1 reason I give away Gen 2 Pmags. Drop one on the stock floor plate and watch your whole mag fly apart.
@@doriancrayy7707 All old comments, no doubt. Quit watching gun channels once our govts corruption became so out in the open. Ain’t got the time nor the want anymore. Luckily I bought everything I care to own along with more than enough ammo before these prices kicked in. Still can’t believe the outright corruption they’ve gotten away with without us going to DC and decorating the trees with these crooks
Ryan Ilano I don't notice the magnification or the slight blue tint. It's only really noticeable if you're looking for it at home. At the range shooting I never notice it at all. For $550 with the scalarworks mount it's the best option for me.
Omar M Kac does not come staked. It's easy to remove and as far as I know it can't be staked. The wrench has a small circle pin. It's a little different.
Gun Porn Media Nah I was just wondering how the fit and finish on your SR-15 was when you got it new? Was it practically flawless or was there marks and dings here and there...off color spots, etc. Mine also had a bit of wear on the charging handle catch...basically it looked like it had been fondled with quite a bit and not exactly new. I did a bit of research though and apparently KAC is known for having shitty fit and finish
RaZeRbLaDeZ yes they're kinda like that. It comes more like a military grade rifle. My upper and lower where different colors. Part of it is it's so dry. It's nothing that bothers me because I'm very hard on my gear. But your not alone and this is pretty normal. This is my fourth one so I've got a decent idea. Don't worry about it though unless it's destroyed.
Gun Porn Media I kind of figured as much...besides that I did a little research and discovered KAC put out a bunch of blem stuff to push stock and lots of people are complaining...do you have any pictures of your rifle when it was kind of new by chance?
He means that he's jealous and wants to validate his shittier rifle. I don't own an SR-15 yet and my DD's, BCMs, and even PSA CHF's have all been great but equal to KAC they are not.
@@georgerafa5041 i own a Mod2..For the money...You can grab a bcm recce or a lwrc di and save the extra scratch to put towards a optic and accessories...The Mod2 is a great rifle but hes right its a bit over priced...I purchased the Mod2 just to see what the fuss was about..I could not tell a nickle of a difference between my recce and the Mod2..Truth be told my Mod2 malfunctioned twice at a course...My lwrc di has never stopped ..The recce has only had 1...Btw thats not a midlength gas system its a touch longer then a middi...Its a hybrid system proprietary to KAC..Nice vid by the way bro..
The hand stop was affordable? U crack me up! I just bought knights micro irons for the first time - I’m giddy with joy... and they were only 55$! I’m in love.
Keter look in gun broker. Search seller name FARFOON. Knights micro. Ur welcome...
I got a KAC SR 30 and I have to say out side the initial gut feeling on my checkbook. I love the gun, it's better than than either my Spikes or Wilson Combat AR 15. It's like a peice of art in gun form.
What a beautiful rifle!
Fudoh1 I agree. But I did sell it for a 14.5"!!
Gun Porn Media Just curious why you traded out the 16in for the 14.5, Did the 16 in Mod2 not perform well suppressed or other reasons? The reason I ask is that I am looking at suppressing my 16in Mod 1.
Jon Frauen no performance issues whatsoever I just wanted another SBR.
Check out what HM Defense has done with the issue of the cam pin, and have a look at their gas block system, it’s milled out of the barrel stock, it’s not attached, it’s physically part of the barrel. Truly brilliant engineering
I have one of those and in the process of building a MOD 1 pistol. Threw on an ACOG and a mams brake. The mams brake makes a considerable difference. Also trying out a JP silent capture spring for fun. I actually prefer the QD end plate from KAC that comes with it. Mine also came with the CTR stock, swapped it for a B5 Bravo. I find the trigger to be similar to a Geissele SSA but slightly less refined. Can't fathom putting grip tape on any rifle let alone a Knights, but everyone has their own preferences. Thanks!
One of 3 rifles that I want! It's beautiful! Congrats!
Hey man saw you had a gap between the rail and upper receiver. Makes me feel good because I had the URX 4 rail installed on my Colt upper and it has a gap as well. Been looking around the internet and I guess that’s totally normal due to the rail screwing on.
Awesome dude
$2200? I payed $2400 for my 11.5 kac upper . Ouch
That's not a bird cage lol
I’m not surprised he said that considering he swapped out the knights tube/buffer setup for a damn Voltor. 🤦🏻♂️
Killer rifle!!!
Why would you like gen 2 pmag over gen 3. I thought gen 3 was an improvement over gen 2 in every possible way
M Nohcho aftermarket plates are why I use gen2 over gen3. Reliability is fine don’t think you can go wrong either way. However Gen 3 seems to run better with HK and Scars
KAC magwells are tight. The gen 2s drop free the gen3 doesn’t
AJ R I guess if you’re gonna change out the floor plates a gen 2 makes sense. That’s the #1 reason I give away Gen 2 Pmags. Drop one on the stock floor plate and watch your whole mag fly apart.
Nice name for the channel
I really wish this channel was still alive.
Florida Man Thanks man. I wish I had more time. It’ll come back eventually
@@gunpornmedia2881
That's great to hear. There is no other channel like yours. Legit gun porn.
No doubt. No one really does knights videos. I have a kac 11.5 and I love it. I am debating on selling all my AKs and getting a SR-25
Dam. I see you commenting on a ton of gun videos ones with kac in particular
@@doriancrayy7707
All old comments, no doubt.
Quit watching gun channels once our govts corruption became so out in the open. Ain’t got the time nor the want anymore. Luckily I bought everything I care to own along with more than enough ammo before these prices kicked in.
Still can’t believe the outright corruption they’ve gotten away with without us going to DC and decorating the trees with these crooks
Excellent video. Please do a video of the rifle stripped down.
Javier Licourt how do you mean?
Kindly disassemble it. As for to clean it. Eye Candy..... Peace @@gunpornmedia2881
Great rifle
Where else can you buy that mlok grip tape?. Boltcarrier.com is out of business I guess.
how do you like using the MRO for the mod 2? i'm torn between optic choices! any real issues with the slight magnification?
Ryan Ilano I don't notice the magnification or the slight blue tint. It's only really noticeable if you're looking for it at home. At the range shooting I never notice it at all. For $550 with the scalarworks mount it's the best option for me.
BCM on a SR15, no go
Charles Bayles this problem has been fixed sir.
Just giving you shit, LOL, no worries
I use them all, I tend to use Ergo, Magpul, and Hogue the most
were you able to remove the rear sling mount with a standard castle nut wrench and did it come staked to the castle nut?
Omar M Kac does not come staked. It's easy to remove and as far as I know it can't be staked. The wrench has a small circle pin. It's a little different.
Yo how do you remove the buffer tube on a mod 2?
What handstop is that, I couldn't make out the name on it.
Appreciate the response
Hey bro can I private message or email you I have this exact same rifle and had a few questions
RaZeRbLaDeZ what's your question ? It would be good for people to read. Unless your trying to sell it or something.
Gun Porn Media Nah I was just wondering how the fit and finish on your SR-15 was when you got it new? Was it practically flawless or was there marks and dings here and there...off color spots, etc. Mine also had a bit of wear on the charging handle catch...basically it looked like it had been fondled with quite a bit and not exactly new. I did a bit of research though and apparently KAC is known for having shitty fit and finish
RaZeRbLaDeZ yes they're kinda like that. It comes more like a military grade rifle. My upper and lower where different colors. Part of it is it's so dry. It's nothing that bothers me because I'm very hard on my gear. But your not alone and this is pretty normal. This is my fourth one so I've got a decent idea. Don't worry about it though unless it's destroyed.
Gun Porn Media I kind of figured as much...besides that I did a little research and discovered KAC put out a bunch of blem stuff to push stock and lots of people are complaining...do you have any pictures of your rifle when it was kind of new by chance?
RaZeRbLaDeZ no pics really just the videos. This video was before it was fired. If your worried about resale value don't be.
>switched out the gen 3
That’s gonna be a yikes from me chief
Upper lower fit sucks, bcg rattles like crazy. I hate to say it but I won’t buy another Knight’s. Believe it or not I like my bcm better
Still overpriced
waste of money
russell what do you mean
He means that he's jealous and wants to validate his shittier rifle. I don't own an SR-15 yet and my DD's, BCMs, and even PSA CHF's have all been great but equal to KAC they are not.
LOLLLLLLL
@@georgerafa5041 i own a Mod2..For the money...You can grab a bcm recce or a lwrc di and save the extra scratch to put towards a optic and accessories...The Mod2 is a great rifle but hes right its a bit over priced...I purchased the Mod2 just to see what the fuss was about..I could not tell a nickle of a difference between my recce and the Mod2..Truth be told my Mod2 malfunctioned twice at a course...My lwrc di has never stopped ..The recce has only had 1...Btw thats not a midlength gas system its a touch longer then a middi...Its a hybrid system proprietary to KAC..Nice vid by the way bro..