2009 GMC Sierra 1500 Push Start Wiring Installation EASY!
HTML-код
- Опубликовано: 21 июл 2024
- This video is intended to be straightforward to the wiring connection. Make Sure You Like, Comment and Sub and Join the 540Gang. This Push Start System was purchased from Amazon. Link Below!
EasyGuard Push Start: www.amazon.com/gp/product/B00... - Приколы
Glad this video has helped so many people!!!! Remember to cap the wires for safety! ….also if you want you can remove the key cylinder by turning the key once and push the button at the bottom to remove the cylinder.
Nice to finally see a good video of it actually done. Makes things a lot easier. I am a one man show in my shop. Thank u kindly. CANADA EH.
thank you so much!!
Thank you for this! Worked perfect for my 2007 Silverado! LIFE SAVER! 🙏🏼🙏🏼😎
thats whats up! im glad it worked out for you
Thanks for this fam very informative
Very informative, Thank you
Glad it was helpful!!!
Thanks works great...
Thanks!
what wires did you leave from the switch
Can u do 1 with a 09 Chevy Surburban LTZ with the locks window and remote start
Thanks bro got a 09 avalanche am doing was lost a lil so u didn't have to use a chip immobilizer
does it works with you also . I have the same car i am 09 avalanche planing to do the same thing But I was told to buy additional Immobilizer bypass device ! I do not know what to do cause this guy also his car 09 should have Immobilizer . So how did it work for him without the Immobilizer bypass !
@@123heraz it work I got the key immobilizer bypass order sum key and pads from Amazon got the key cut and program the pads
@@318ryder2 Thanks brother
great! hope it worked out for you
Please tell me u didn't leave the wires electrical taped like this and there all actually soldered and done correctly
😂😂😂 no I used wire caps and went over it with electrical tape for protection of the cap
Thanks for the info, just curious. If you have remote start can you still hook this up and use the remote start on the key fob ?
yes you can just go straight from the sterring column ....has to be installed before the original start
What did you do with the original ignition did you put a key in it if so what position was it on. If not did you remove it and the ring around it
i did way with it being the owner lost their key
Would I be able to splice for example both ends of the ignition wires with the push button wire so I could use either the turn key or push start at my discretion?
Yes the key in the ignition is just mainly for the steering wheel to be unlocked if using the start
It’s the same with Silverado I’m assuming? Harness colors I’m referring to
hello, yep it;ll be the same. sorry for the late reply
What if you have a remote start truck? Will it mess with the remote start functions?
just install under the steering column as in the video
I think you can long press it to just start the vehicle without triple tapping.
ok cool!!
I got a 2013 Silverado exact same product but I have everything hooked up to where it will turn on the air and radio but still won’t turn the starter
When I hook the yellow wire to my white ignition wire it won’t even turn with they key that the only thing causing a problem
Please tell me you soldered or crimped the wire and used wire caps
Yes wire caps
What if my truck don't use a fob ? Can I still do this
yes you can still install this
Does the remote start still work if you have it stock? Do you have to have the key in it?
No key just the push button
Well this method work with a remote start aswell?
hello, yep just youll need to connect the door lock and unlock
Does this work for a suburban LTZ 2009 ?
yes
I installed on my 1999 Tahoe I go to start the car and the starter keeps going and the engine shuts off the security lights go on wtf
U need a pass lock bypass module
Are you able to start your tuck without the key in the ignition
hello, yep. this persons truck ignition was bad so we bypassed all that.
@@540tv6 how did y’all bypass?
@@540tv6 can you explain how we start the car without the key in the ignition
@@540tv6 what they normally recommend is you get a flat copy of your key made and cut or break it off with ignition turned to on/not start. Then you really the the key slot cap and install your push button over the hole.
You didn't need any relays or nothing like that?? Just basically connect the wires and thats it?
I’m super late but no relay
Do you have an immobilizer hooked up to bypass the trucks built in security?
no immobilizer was needed.
Are you close to Dallas, TX. ? I'll will need help to install it in my silverado 2011.
No, I’m in NC
What you need help with?
@@540tv6 OK!
Well, what kit you use?
I see this in Amazon: BANVIE Leather Key Car RFID Push to Start Ignition kit Engine Start Stop Button Switch Keyless Go System
What if my truck turns on after install but won’t switch gears ?
That would have anything to do with the gears.
I press the button and the truck turns on
But when I try and put it into drive it won’t budge
What about a2008 trailblazer
Wiring diagram will be different but it will work the same
Does this not do remote start
This system is for push start. But remote start connections are exactly the same
Boss that's for the video
Do your wipers work
@@damonquebeans what lol
Ok pimpin, Im trying to hook up a kill switch to my 07 sierra, what color is the ECM-Ignition wire I should tap into, and na most of these Foos tell you but dont show you shit jajaja you explained it by wire color thats whats up
Yes sir I hate those videos!! Glad it helped you
@@540tv6 appreciate it
WOULD YOU BE ABLE TO SEND ME A PICTURE OF THE BUTTON IT SELF
Unfortunately this was for a customer
Had to fast forward more than a minute cause he kept saying 540.