How To Build A Steam Bending Box That Uses A Simple Wallpaper Stripper

In today's video, I go through the process of how to build your very own steam-bending box that hooks up to an everyday wallpaper stripper. I later used this to steam bend window frames for a DIY camper that fit perfectly to the curvature of the van (link coming soon!)
You’ll need 18mm exterior plywood to build this steam box and will need to make the following cuts with it:
Steam Box: 4 x cuts | 150cm long | 17.5cm wide
End Cap and Door: 2 x cuts | 18.4cm long | 18.4cm wide
Steam Box Legs: 4 x cuts | 10cm long | 18.4cm wide
+ 1 x cut | 18.1cm long | 18.4cm wide
+ 1 x cut | 16.9cm long | 18.4cm wide
To support the timber once it is inside the steam box, you will need a 12mm dowel cut to the following size:
Internal Supports: 6 x cuts | 16.6cm long
Stay in touch:
Instagram // insidethewoodandwildworkshop
Facebook // insidethewoodandwildworkshop
Website // www.insidethewoodandwildworkshop.com

[@dusty_hands4972]

Yes very helpful, thanks a lot.

[@KarlRumpelstielzchen]

Danke