You can also use 3 different pieces of 1 1/2 dowel rod with adhesive backed sand paper wrapped around . Use a "Threaded insert" in the dowel rod and a piece of "All thread" that fits. Then you have more surface area to use for sharpening. Also its not glued on when it wears out. Just change out your rods for a different grit.
@27:57 Did anyone else see the ant crawling on that strip of metal ?? Great video on DIY❤ I'm going to use 2 on my crossbow trigger grip (no high tension area). Thanx
I was reluctant at first because my own solutions would have exceeded CR's but as I continued I realized you are exactly me. Kudos for your insistence on finding innovative solutions to everyday problems
That salt you put into the bowl of water to remove the rust from the shears is a great idea number 4, cool vid - I liked it even if others did not, as other have stated their country of origin, so will I, I am from England and I approve of this video. what some folk do not seem to realise is that in hard times (whatever they may be) ideas like this could end up being very useful and practical, especially if you are not near decent realms of civilisation. I also liked the repair work you did on idea number 3.
@creationholic101 gotta watch it on a break or after a problem. That's my job. I'm a hired gun, with no gun. Just a small fortune in Fluke meters. Hey! Best wishes, and Thank you!!!!
Fantastic work and cleverness!!! #3 is just what I need for a project of mine... do you have an item list I could buy from you? I just subscribed to your channel but haven't found one. Thanks!
Thank you for subscribing and for your kind words! I don’t have a specific item list for purchase, but I can share details about the materials used in #3. Feel free to ask about any particular items you need.
First, absolutely brilliant! Binge watching your videos. Thanks for sharing them. For the battery/spark plug hack....the power adapter I have is 19 volts (the video suggests 12volts). Is that too much voltage or do you think it would be okay? And what is that aluminum looking tape you're using?
It's adhesive-backed aluminum tape (comes in several thicknesses, this one's quite thin). It's great for lining engine bays to reflect heat from more sensitive areas, or to make simple electrical connections, where stress/strain isn't an issue, or simply to 'pretty-up' any plastic or crappy-looking parts, 'cause it polishes-up to almost a mirror finish. It's also good for a hundred other things too... ... so, got any ideas? 😁
What a long wait to see a sharpener that destroys every knife it touches . I could achieve the same ragged edge with a rock from the garden. This is all bullocks
Slicing the paper the first time he was not at much of an angle…..after he was practically laying the knife on the edge…. That blade wasn’t that dull to start!!!
Sticking sand paper on the drill chuck is not safe for your palm Otherwise, the idea is good. Using 12 v battery for electrolysis method of cleaning rusty tool which I do very often but add some sodium carbonate powder into the liquid will increase reaction
8:40 Genau, man steckt das einfach mal an eine Steckdose - das ist lebensgefährlich. Und das Schleifding für Messer? Wie lange soll das halten. Die Vorschläge in diesem Video: unnötiger Aufwand und teilweise lebensgefährtlich. Bitte nicht nachmachen. Vor allem diese Schweißzündkerze kann dich tödlich umbringen.
That's OK. I didn't want to see a battery in a drill. But my SO does, so I guess I'll be looking for something tonight. i guess I shoulda gone right past it, huh?
You have to have a good cordless drill plus two types of sandpaper. The sand paper comes in packets. The leather strip coming from an old wallet isn't necessarily available or convenient. Then you also must get some scrap PVC pipe from a hardware store, a roll of Duct tape and a nut and bolt. When you put all the items together from a shopping list you'll end up spending about $65. Yet what does a good knife sharpener cost?
Gut gemacht mein Freund 👍👍👍👍👍
Glad you like them!
I am from Turkey,greetings
Greetings to you too! Thank you for watching from Turkey!
عالیه همه کارات به درد بخوره و قابل اجرا❤
ممنون از نظر مثبت شما! خوشحالم که از ویدیو لذت بردید و مفید بود.
Mckie721 🎉😂😢😮@@creationholic101
🎉 9:19
Buenísimo te vi desde Argentina, saludos
Me alegra que te haya gustado el video
οκ All!!! I'm from Greece!!!!🙃😂😉🤣😅
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Tunisie,du beau travail, n’est ce pas, bon courage et bonne continuation !
Thank you for your support! Hope you find more interesting content.
С садовыми ножницами отличная идея 👍👍👍 пойду и себе попробую 😊
Glad you like them!
Very special.
Im From Holland
Thanks and welcome
Diving in the eccentric to create the practical. Btw, that's a compliment! Amazing creativity!❤❤❤
Thank you so much 😀
love the ideas--love the way you demo
Thank you! I'm glad you enjoyed the ideas and the demonstration. Your support means a lot!
Great video, thank you!
Glad you liked it!
One of the Best diy Videos i found on RUclips..greetz from germany
Glad you liked it!
Thanks, really enjoyed these ideas!
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
You can also use 3 different pieces of 1 1/2 dowel rod with adhesive backed sand paper wrapped around . Use a "Threaded insert" in the dowel rod and a piece of "All thread" that fits. Then you have more surface area to use for sharpening. Also its not glued on when it wears out. Just change out your rods for a different grit.
Great idea! Thanks for sharing this useful tip.
Dear Mr. Patrick, please can you give me more details on your suggestion? I love to make them your way. ❤❤❤
You are amazing and I was amazed at things I never knew!
Thank you so much! I’m glad you found the ideas helpful and surprising!
Very interesting video!.. Thank you
Thank you for watching
Totally awesome. Thanks for sharing
Thanks a lot! I’m glad you enjoyed it. Is there anything specific you’d like to see more of on the channel?
Handy blacksmith.
You can draw a straight line around the pipe
with a rectangular piece of paper or use a pipe holder as an aid.
Great suggestion! Thanks for sharing! 😊
Thé trop fort ! j'y aurais pas pensé..... BRAVO ! EURÊKA !
Merci beaucoup ! Je suis ravi(e) que vous ayez trouvé cela intéressant. :)
they are all amazing.
Thank you so much! I’m glad you enjoyed them.
I was totally impressed, I don’t think the people complaining saw the same video I saw. Great welder.
Thanks 👍
@27:57 Did anyone else see the ant crawling on that strip of metal ?? Great video on DIY❤ I'm going to use 2 on my crossbow trigger grip (no high tension area). Thanx
Haha, I missed the ant! Glad you enjoyed the video. Good luck with your crossbow trigger grip project!
@@creationholic101 I'm starting it today. Thanks for the good wishes... you have a great day now. I'll let you know how it turns out❤
انا من الاردن في الحقيقة ان أفكارك مذهلة وتستحق الاحترام لان هذا بالفعل ابداع
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Génial
Thank you! Cheers!
#2 is actually useful sweet
Thanks! I’m glad you found it useful.
Your idea is very good. I fixed it in your way last time. Thank you.
You are welcome
Bạn quá tuyệt
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
9t0@@creationholic101
Nice video! For #2, what gauge of wire did you use? Watching from Southern California.
Thank you for watching! I used 2.5mm
I was reluctant at first because my own solutions would have exceeded CR's but as I continued I realized you are exactly me. Kudos for your insistence on finding innovative solutions to everyday problems
Thank you for your kind words! I'm glad you found the solutions innovative.
Creative
Thanks! I’m glad you found it creative.
That salt you put into the bowl of water to remove the rust from the shears is a great idea number 4, cool vid - I liked it even if others did not, as other have stated their country of origin, so will I, I am from England and I approve of this video. what some folk do not seem to realise is that in hard times (whatever they may be) ideas like this could end up being very useful and practical, especially if you are not near decent realms of civilisation. I also liked the repair work you did on idea number 3.
Thank you so much for your detailed feedback! I'm glad you found the salt idea useful and enjoyed the video. Your support from England means a lot!
Ganz tolle Videos, man hat alles zu Hause, man muss nur die Idee dazu haben, wie es geht,finde,das es super Ideen sind und praktisch dazu
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Damn!! A real live MacGyver. Dig it!.
Thanks! I’m glad you enjoyed the creativity. It’s fun to come up with unique solutions!
Your RUclips video was awesome! What was the green material used on the leather for the knife sharpener? I live in South Carolina, USA!
polishing wax
@creationholic101 gotta watch it on a break or after a problem. That's my job. I'm a hired gun, with no gun. Just a small fortune in Fluke meters. Hey! Best wishes, and Thank you!!!!
Çok güzel videolar
Çok teşekkür ederim! Beğendiğinize sevindim!
MANY just don't get it...but I do. Keep thinking outside of the box, man...many ideas percolate when watching your vids!
Glad to hear you’re inspired! Thanks for watching, and I’ll keep bringing more ideas!
sei un genio
Grazie mille! Sono felice che ti piaccia il video.
Fantastic work and cleverness!!! #3 is just what I need for a project of mine... do you have an item list I could buy from you? I just subscribed to your channel but haven't found one. Thanks!
Thank you for subscribing and for your kind words! I don’t have a specific item list for purchase, but I can share details about the materials used in #3. Feel free to ask about any particular items you need.
First, absolutely brilliant! Binge watching your videos. Thanks for sharing them. For the battery/spark plug hack....the power adapter I have is 19 volts (the video suggests 12volts). Is that too much voltage or do you think it would be okay? And what is that aluminum looking tape you're using?
It's adhesive-backed aluminum tape (comes in several thicknesses, this one's quite thin). It's great for lining engine bays to reflect heat from more sensitive areas, or to make simple electrical connections, where stress/strain isn't an issue, or simply to 'pretty-up' any plastic or crappy-looking parts, 'cause it polishes-up to almost a mirror finish. It's also good for a hundred other things too... ... so, got any ideas? 😁
Awesome, thank you!
👍👍👍👍
Thank you! Cheers!
O que mais gosto das suas ideias é que mostra para o que servem
Muito obrigado! Fico feliz que você tenha gostado do propósito das ideias.
👍👍👍👍👍👍👍👍👍👍
Thank you for watching
와우~ 👍💯❤최고
🌹🌹🌹3송이 남기고가니 자주뵈요 행복한 팔월되시기 바래봅니다.❤❤❤
Hello! I am glad you like this ideas. Wishing you all good things!
This is cooler than Netflix.
#4 toothpaste trick for a strop is great.
Thank you for watching
Great ideas! I was looking up if I could buy iron powder before you finished that last one! 😂 I can see that coming in really handy. Cheers!
Thank you! Cheers!
I haven't looked it up yet but did think , now where do I get that from.
6 very creative ideas, and in fact, I will learn and apply them in practical work. I think it will help save money and time. Thank you
Wonderful!
What was that clay type of thing that you used on the last segment? Thanks
I used regular modeling clay that children play with
Wonderful ideas!
Glad you think so!
hola ich schaue mir das in Paraguay an
Thanks for watching from Paraguay!
Very nice video; I'm a french electronic musician, which play concert accordion and laser-harp; all the best from france.
Thank you very much!
Ok👍
Thanks for the thumbs up! Is there anything else you’d like to see on the channel?
Please, can you tell us what is the block piece which you applied to the final step leather part to sharpen a knife, thanks❤❤❤
Polishing Wax
What did you rub on the leather
Why go to all the trouble with sand-paper ? There are many round disc sanders of various grade from fine to coarse for attachment to drills.
Good point! Round disc sanders can definitely make the job easier and faster. I’ll consider that for future projects. Thanks for the suggestion!
Cách này hay đấy em ạ,em là người Việt Nam mà sao anh thấy video của em toàn ngôn ngữ nước ngoài là sao vậy ❤
Kênh làm hướng đến đối tượng người xem toàn thế giới nên cần phụ đề sang nhiều ngôn ngữ anh ạ. Rất vui gặp anh 😊
Thank you so much for your positive feedback! I'm glad you enjoyed the video and found it helpful
Wie und woher bekomme ich die Eisenspäne?
Scheint ja genial zu sein...
Ä
You can buy or use a file to grind iron to get iron filings
나는
오래전부터
만들었어 ㅡ사용중
골아프게
호박 돌리지 ㅡ말고
3000원짜리
칼
싸다가 쓰시면
훨 ~~~훨 ~~~~
나아요 ㅡ깍 😅깔 ㅡ
Thank you for watching
Open the AA battery and found no solid core. What kind of battery has the solid core?????
Panasonic batteries or maxell batteries are available
@@creationholic101 Has to be a zinc-carbon battery, not alkaline nor rechargeable.
Super glue and baking soda will fix many plastic breaks, and just melting a zip tie into areas will help with missing small plastic sections
Thanks for the info!
What a long wait to see a sharpener that destroys every knife it touches . I could achieve the same ragged edge with a rock from the garden. This is all bullocks
I'm sorry to hear that the sharpener didn't meet your expectations. Thanks for your feedback!
@MattSChewbacca a wet stone is the choice 4 me simples
Cách thứ nhất không ổn! Trục quơ quá, không đồng tâm. Có thể lấy đoạn ống thẳng nào đó vừa đủ đường kính của máy khoan kẹp chặt thì ok hơn!
Hello! thanks for your recommendation. Wish you all the best!
Slicing the paper the first time he was not at much of an angle…..after he was practically laying the knife on the edge…. That blade wasn’t that dull to start!!!
Thanks for the observation! I’ll keep that in mind for future videos.
Sticking sand paper on the
drill chuck is not safe for your palm
Otherwise, the idea is good. Using 12 v battery for electrolysis method of cleaning rusty tool which I do very often but add some sodium carbonate powder into the liquid will increase reaction
Thanks for the tip about the sandpaper! Safety is always my top priority. I'll definitely be more mindful of that in the future.
The reason I watched it was to see the tip about the battery but it wasn't there,
pin in idea number 2 and number 4 you
It was, the insulation was stripped off and it was placed in the drill chuck.
Why not use your other sharpener you made that has 3 different grades of sharpening⁉️
I hope you didn't hurt the ant that entered the frame at the end of the video...
No worries! We made sure the ant was unharmed. Thanks for your concern!
The knife sharpening is crazy.. All wobbling and off wack !
I'd be so afraid of blowing the house up.
It's quite safe, try it and feel it, if you're worried do it outdoors
Alan esbjerg.. ok nice kanal tak. Vender tilbage,skal lige have bøffet et tændrør😮
Tak for din kommentar, Alan! Glæder mig til at høre, hvordan det går med tændrøret.
I would rather buy a new ones
Understandable! Sometimes buying new is more convenient. Thanks for sharing your thoughts.
Tôi ở việt nam
France
did he just build a welding gun?
Yes, it’s a DIY welding gun! Have you ever tried making or modifying tools like this?
I just don’t get the use of battery for sharpening? WHY??
it helps remove remaining plaque and stains
Perhaps the battery was flat😂
8:40 Genau, man steckt das einfach mal an eine Steckdose - das ist lebensgefährlich. Und das Schleifding für Messer? Wie lange soll das halten. Die Vorschläge in diesem Video: unnötiger Aufwand und teilweise lebensgefährtlich. Bitte nicht nachmachen. Vor allem diese Schweißzündkerze kann dich tödlich umbringen.
Thank you for sharing your feedback and expressing your perspective
انا من فلسطين نيت المقدس
بيت المقدس
Welcome to Creation Holic channel! Thanks so much for watching our video. Wish you all the best
Able to build a cathedral with wooden toothpicks. Spanish saying.
Great saying! Thanks for sharing this wisdom.
That's OK. I didn't want to see a battery in a drill. But my SO does, so I guess I'll be looking for something tonight. i guess I shoulda gone right past it, huh?
"It sounds like you’ve got a plan for tonight! Hope you find what you're looking for. Anything else you’re curious about?"
❤❤❤❤❤❤❤❤❤❤❤❤❤🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
Thanks for the love and support! 😊🎉
REQUIRES MORE TIME, PATIENCE AND KNOW HOW THAN i HAVE :)
Thank you for sharing your feedback. Have a good day!
Clickbait. Nothing about a battery in a drill👎👎👎
In the video there is content about the battery clamped to the drill in idea number 4
Why they do that sheet..?.?😡
😮😮
@@creationholic101l
I didn't think there would be....thanks for confirming. ..stupid shit
Es dafür wesentlich einfachere Mittel, um ein Messer zu schärfen - und dafür muss deswegen keine Brieftasche daran glauben!
Thank you! Cheers!
Looks like fun.
Looks like Iike fun stuff.
Está faltando denunciar a cumplicidade das empresas promotoras dos debates e as moderações FROUXAS. Com mais ênfase e não apenas de leve.
Obrigado pela sua opinião. Iremos considerar suas sugestões.
You won't be cutting anything else with those sizzors.
It's very effective, try it and feel it
Why?
Sorry, I didn’t quite catch that. Can you repeat the question for me please?
Ah, nope, nope, nope, nope, nope and nope.
Thank you for watching
Cela ne vas pas concurrencer😄 TORMEK
Vous avez raison, TORMEK est très performant. Nous explorons différentes méthodes pour offrir des options variées.
6
Thank you for watching
baaaaaahh.... a stone sharpener is much effectiver.
Thank you for watching
You have to have a good cordless drill plus two types of sandpaper. The sand paper comes in packets. The leather strip coming from an old wallet isn't necessarily available or convenient. Then you also must get some scrap PVC pipe from a hardware store, a roll of Duct tape and a nut and bolt. When you put all the items together from a shopping list you'll end up spending about $65. Yet what does a good knife sharpener cost?
Thank you for sharing, I used things available in the house to create it. If everything needs to be bought new, it's best to buy a knife sharpener.
Too much wasted froo froo- and show what you are making before video starts, otherwise it's annoying.
Thanks for the feedback! I’ll consider showing a preview at the start to make it more engaging.
Number 5 is a waste of time and materials. The brush of your tooth brush should always be covered or like I have mine - in Baking Soda and mouthwash
Thank you for the feedback. Using baking soda and mouthwash is an interesting idea. Do you have any other tips for maintaining hygiene?
Horsefeathers
Thanks for your feedback. If you have any specific suggestions, I'd love to hear them!
Nothing about battery...
اعمل مع الشرح اتكلم
Shukran 'ala ra'yak! Sa'akhudh bi'itibaar takhseesak fi al'ashraah.
SŁODOWY od siedmiu boleści😂
Thank you for watching
Without explanation the video is meaningless. No telling what the materials are or what the items are being made to do. Sorry it's not a good video.
❗Please enable subtitles in your language 🙋🏼♀ Thanks for watching 😋🤗😘
4.
Thank you for watching
It's all nice when you are bored to death 😅.
Thank you for watching