Sounds Excactly correct, as my 2001 explorer had the dash indicator on until i noticed an audible 5 beeps while the light indicator has disappeared from the dash. Good Job THANK YOU
Thank you now I now how this beep beep started. It started right after my airbag light stopped work two weeks ago. Thank you so much for this info going to fix it right away before it drives me crazy!!! Lol
That's the airbag diagnostic module. It controls activation of the airbags. So yes, disconnecting it saves much annoyance. But I wouldn't recommend forgetting about it afterwards.
Mine just started doing this a few weeks ago...5 beeps and it does it 5 sets. Now, my air bags were blown 6 years ago, so, I don't really care if it disables them. Thanks!
I found out that it is a worn-out door pin switch that turns your dome lights on and off located on the inside of your door. If you replace that the dinging should stop
I’ve got this beeping after taking out the cluster gauge, I unplugged what he unplugged which is the airbag sensor and it doesn’t beep anymore thank you!!! I’ve got an aftermarket steering wheel which has no airbags so win win
What happens if you dísconnected that part? Something wrong? In My Mustang is the same beep noise, but it makes the noise after 30 minutes driving the car.
Erick Carmona Mine was the same way. I've been driving it that way for a couple months with no issues. Somebody told me that the part you disconnect is the airbag sensor, and it's like a 500 dollar part to replace. So you will be driving without airbags, but if it's beeping like that, you're already doing that anyways.
Why does your driver side air bag look different? I have an 02’ V6 Mustang and I have to say that I like the look of the one you have better than the original one. Any ideas?
The part you are disconnecting is the airbag sensor. If it's beeping like that and this fixes it, it means the sensor is faulty, and you won't have any airbags unless you replace the sensor.
I have the same beep but my airbag light is on on a 2006 crown victoria on my passanger side. There is no burned out light. So i guess my airbags are out.
Well with the beeping it says there’s something wrong with the airbag system. I would assume they wouldn’t work even with them plugged in if they have a problem but I could very easily be wrong
@@prestonbenton8063 The fix is to replace the crash sensor or sensors at the from of the car/Truck. But before you do anything with the airbag system is to disconnect the battery and let the internal charge drain.
That is not how you fix it do you even know what you’re disconnected fix it would be finding out why it’s Dean and fixing that problem not disconnected the wire harness so you do some more research and figure out why it is dinging
Okay but what happens if you disconnect that? It was connected for a reason lol.
Does this work for the 96 mustang as well?
I did a lot of research on these 5 sets of 5 beeps, and they are an indicator to let you know your Check Airbag light in the dashboard is burned out.
Sounds Excactly correct, as my 2001 explorer had the dash indicator on until i noticed an audible 5 beeps while the light indicator has disappeared from the dash. Good Job THANK YOU
How do I get rid of the noise ?
Thank you now I now how this beep beep started. It started right after my airbag light stopped work two weeks ago. Thank you so much for this info going to fix it right away before it drives me crazy!!! Lol
Thanks
@@GhettoGuapBoyzyou didnt watch the video?
That's the airbag diagnostic module. It controls activation of the airbags. So yes, disconnecting it saves much annoyance. But I wouldn't recommend forgetting about it afterwards.
@@ajconlin8525 Goodness, I'm glad he did too. Wouldn't wish that upon anyone.
Oooh, my 04 ranger had deployed airbags and I to them out and it beeps at me sometimes. I have no warning lights so I was super confused
Thanks for that info. That sounds about right
Mine just started doing this a few weeks ago...5 beeps and it does it 5 sets. Now, my air bags were blown 6 years ago, so, I don't really care if it disables them. Thanks!
That did not work for me when I pulled it out on my 04 mustang, it just disabled my airbag
I found out that it is a worn-out door pin switch that turns your dome lights on and off located on the inside of your door. If you replace that the dinging should stop
I’ve got this beeping after taking out the cluster gauge, I unplugged what he unplugged which is the airbag sensor and it doesn’t beep anymore thank you!!! I’ve got an aftermarket steering wheel which has no airbags so win win
What happens if you dísconnected that part? Something wrong? In My Mustang is the same beep noise, but it makes the noise after 30 minutes driving the car.
Erick Carmona Mine was the same way. I've been driving it that way for a couple months with no issues. Somebody told me that the part you disconnect is the airbag sensor, and it's like a 500 dollar part to replace. So you will be driving without airbags, but if it's beeping like that, you're already doing that anyways.
Why does your driver side air bag look different? I have an 02’ V6 Mustang and I have to say that I like the look of the one you have better than the original one. Any ideas?
0:31 Same thing. Does your radio and heat work? Lotta wires for that tone. I really wanna fix it. Thanks for the info
Same sound I’m getting on a Crown Vic
Mine too what did you do?
@@dylankissner5230
It was my seatbelt pretensioner needing changing … I got from junkyard and replaced myself
lol welp i was there for som ,my 99 Mountaineer also has thoz 5 beeps and the airbag light isn't on , is urs on??
Same situation with the 04-08 F150. Good to go.
Where is the plug I need to unplug???…my 04 f150 is doing this it’s driving me nuts
98 to 03 f150 as well
Mine started after taking the gauge clusters out of my 99 f150 to fix
You are awesome bud. You´re right it was really annoying. Does it affect your car in any way?
The part you are disconnecting is the airbag sensor. If it's beeping like that and this fixes it, it means the sensor is faulty, and you won't have any airbags unless you replace the sensor.
FridayLights will the airbags still work if u crash ? If u disconnect it ?
alex r
um. No.
I have the same beep but my airbag light is on on a 2006 crown victoria on my passanger side. There is no burned out light. So i guess my airbags are out.
is the air bag sensor..you need to check the a/bag fuse or module
Word✊️. I just put bkack tape over my dashboard lights😂😂jkjk. Thanks this helped
Anyone kno where the airbag connector is for 05-09 ford mustang?
It’s not fixed, it’s disconnected. The airbag sensor is still bad.
My crown vic is doibg the same
It's 5sets of 5beeps. Look up the code
Does this work with 97gt need help
Anyone know where it is in a 06 escape ?
What did you unplug? I'm sure that will cause other problems.
Air bag sensor
This happening to my 96 ford ranger
is you airbag light on??
No one knows what happens when you disconnect that?...
Riiiight??? Lol i know You know that too!
Thats not fixing it! That DISABLING the airbag system
Well with the beeping it says there’s something wrong with the airbag system. I would assume they wouldn’t work even with them plugged in if they have a problem but I could very easily be wrong
@@prestonbenton8063 The fix is to replace the crash sensor or sensors at the from of the car/Truck. But before you do anything with the airbag system is to disconnect the battery and let the internal charge drain.
That is not how you fix it do you even know what you’re disconnected fix it would be finding out why it’s Dean and fixing that problem not disconnected the wire harness so you do some more research and figure out why it is dinging
Air bag sensor
I got the same proble but on my f150 04
Me too!! 2004 f-150
Bro I need help I have 2005 E 250 econoline same beeping noice in this van can u help me