One way I found to let them safely move without having them twisting & flipping is just to make the stand smaller so you don't need a lot of chain, then the i-bolts being connected to s-hooks & the s-hooks to the plates. You can take a big set of pliares or some clamps & squeeze the hooks partially shut so the plate can't come off, but open enough that everything can move freely. Probably not going to be the best option for people that want to move them a lot, but it works really good for my little backyard spot. Only using handguns & rimfire, so it may or may not be viable for rifles.
Better to put a nut or two between the carriage bolt head and the rubber, then bolt it to the rubber. This will lean the plate downward, making spall and ricochets to go downward, where they belong. Thanks for posting!
I finally bought my first steel target when I sold my house. I thought the more it cost the better.... so I went with grizzly steel reactive target with the hostage spinner.. in 1/2 in steel. I've only shot it with pistol so far. The target laughs at me I don't think 9mm or 380 make the reactive react. So I'm thinking about doing exactly what you did maybe just pickup some cheaper steel targets from sportsmans warehouse or something.
I use a heavy duty shepherd's hook, a heavy duty carabiner, & hang the gong. These 3 things should last more than a lifetime. Haven't had a single problem out of this setup yet. I do like your idea though, cheap, easy, effective.
We have a factory nearby, I get scrap conveyor belt pieces. Interesting enough, conveyor belting nowadays has woven Kevlar in it. Easy to cut into strips. I have even hung squares and attached paper targets. .45 and .9mm don't go through when the hang loose. Great video
I have been thinking about this issue, thank you. My answer was to buy several gongs and a few spinners working from LT to RT on hits, so to give time from the first hit to the last target so by the time I got back to the first one it had "hopefully " stopped moving
@@KitBadger I still have ones that shake incessantly or one that books over the top and get stuck. It's completely obnoxious and I found mud flaps on yay Amazon 15 bucks for two of them so I got plenty of the rubber to do everything. I really like your idea
Hey Ivan, great videos, I love the diversity of things you are covering, and the nice settings! I was wondering if you noticed any dampening of the gong's feedback from attaching it snugly to the mudflap? Cheers
MR T - First let me say, I love your work... Sucka-Fool. (Sorry, I grew up watching the A-Team) In answer to your question, yes a little. The thing is, with smaller gongs especially, you don't really get that feedback from it. The audible feedback you are usually getting is the target jangling around on the chain. And with small gongs they take foreeeeever to reset. I use this more for pistol, so I hear a slap and have the visual as it blasts paint off.
Thanks for the reply! Haha, my initials are actually M.R.T. but I did like the A-Team too, and grew up watching as well. Did you watch Knight Rider?.... I have a bunch of small-medium gongs, but my local range that is most accessible does not allow metal targets. One of these days I'm hoping to set them up on a friend's land, but it will mean hiking them in and then either packing them back or hiding them away somewhere (it is posted but hunters often ignore the posting). I have a silhouette target that I imagine will reset faster with the weight for pistol distances. Anyway, I really appreciate your videos, I've been watching a bunch of them.
If you put a nut in between the target and the mud flap it gives a better report. Less contact to the rubber less vibration is absorbed. It does not effect the function at all. And surprising after 1000 rds hasn’t really worn the flap to bad. It does make the steel tilt a little but if anything that’s a good thing.
I got caught, but managed to get off after I told the trucker that I was looking to make a gong to shoot. He thought I said dong to shoot, and proceeded to let me have that mud flap. The experience wasnt as bad as I expected.
Found a flap at a truck stop, did this and worked out great.
Simply adorable solution! Thank you
like your humor, thanks, man!
One way I found to let them safely move without having them twisting & flipping is just to make the stand smaller so you don't need a lot of chain, then the i-bolts being connected to s-hooks & the s-hooks to the plates.
You can take a big set of pliares or some clamps & squeeze the hooks partially shut so the plate can't come off, but open enough that everything can move freely.
Probably not going to be the best option for people that want to move them a lot, but it works really good for my little backyard spot.
Only using handguns & rimfire, so it may or may not be viable for rifles.
Better to put a nut or two between the carriage bolt head and the rubber, then bolt it to the rubber. This will lean the plate downward, making spall and ricochets to go downward, where they belong. Thanks for posting!
I finally bought my first steel target when I sold my house. I thought the more it cost the better.... so I went with grizzly steel reactive target with the hostage spinner.. in 1/2 in steel. I've only shot it with pistol so far. The target laughs at me I don't think 9mm or 380 make the reactive react. So I'm thinking about doing exactly what you did maybe just pickup some cheaper steel targets from sportsmans warehouse or something.
I use a heavy duty shepherd's hook, a heavy duty carabiner, & hang the gong. These 3 things should last more than a lifetime. Haven't had a single problem out of this setup yet. I do like your idea though, cheap, easy, effective.
I like how easy a shepherds hook is, but it takes forever to reset. This is just another option.
Awesome idea.
Thanks man, it is just another way to go about it. Let me know if you give it a try.
@@KitBadger I need to create a super portable...light weight gong stand...so I can pack it out on the range by hand.
We have a factory nearby, I get scrap conveyor belt pieces. Interesting enough, conveyor belting nowadays has woven Kevlar in it. Easy to cut into strips. I have even hung squares and attached paper targets. .45 and .9mm don't go through when the hang loose. Great video
Nice, that is a great resource.
I have been thinking about this issue, thank you. My answer was to buy several gongs and a few spinners working from LT to RT on hits, so to give time from the first hit to the last target so by the time I got back to the first one it had "hopefully " stopped moving
Solid plan. :)
@@KitBadger I still have ones that shake incessantly or one that books over the top and get stuck. It's completely obnoxious and I found mud flaps on yay Amazon 15 bucks for two of them so I got plenty of the rubber to do everything. I really like your idea
@@Digitallifeconcepts nice!
You lost the ringing noise by dampening it with the rubber flap
Did this guy just tell me to go to a truck stop and steal a random truckers mudflap?
That’s what I thought he implied as well.
@@michaelsalcido3736 2:02 no he quite literally says to go and steal some mud flaps lol
Awesome idea!!!
Shout out to that mudflap from Boise ID!!
#represent
Get t T posts and a post driver. Leave the posts at your shooting spot. With t post hangers it's Easy setup and tear down.
Hey Ivan, great videos, I love the diversity of things you are covering, and the nice settings! I was wondering if you noticed any dampening of the gong's feedback from attaching it snugly to the mudflap? Cheers
MR T - First let me say, I love your work... Sucka-Fool. (Sorry, I grew up watching the A-Team) In answer to your question, yes a little. The thing is, with smaller gongs especially, you don't really get that feedback from it. The audible feedback you are usually getting is the target jangling around on the chain. And with small gongs they take foreeeeever to reset. I use this more for pistol, so I hear a slap and have the visual as it blasts paint off.
Thanks for the reply! Haha, my initials are actually M.R.T. but I did like the A-Team too, and grew up watching as well. Did you watch Knight Rider?.... I have a bunch of small-medium gongs, but my local range that is most accessible does not allow metal targets. One of these days I'm hoping to set them up on a friend's land, but it will mean hiking them in and then either packing them back or hiding them away somewhere (it is posted but hunters often ignore the posting). I have a silhouette target that I imagine will reset faster with the weight for pistol distances. Anyway, I really appreciate your videos, I've been watching a bunch of them.
Knight Rider with Kit! Haha, haven't seen that forever. Thanks for the kind words on my videos.
If you put a nut in between the target and the mud flap it gives a better report. Less contact to the rubber less vibration is absorbed. It does not effect the function at all. And surprising after 1000 rds hasn’t really worn the flap to bad. It does make the steel tilt a little but if anything that’s a good thing.
That little guy? I wouldn't worry about that little guy.
I was thinking about doing this with some radiator hose I had laying around. It appears to muffle the sound of the gong though.
Maybe try stacking washers on either side of it.
Good idea, just don't steal the mudflaps.
It’s dangerous... :)
“Big bottom, big bottom, if you like mud flaps my girls got ‘em”
Surplus fire hose works great too
I got caught, but managed to get off after I told the trucker that I was looking to make a gong to shoot. He thought I said dong to shoot, and proceeded to let me have that mud flap.
The experience wasnt as bad as I expected.
Haha, nice!
😂😂😂😂
Man inches! 😂😂😂
but it doesnt ring thats boring BORING !
Exactly why I don’t use them, they deaden the sound defeating the purpose. The less contact with the steel, the louder they ring.👍
@@alcantrell5340 visual yes audible nope :/
Ready to start a brush fire ha ?
Not the sharpest knife in the drawer.
Hahaha your gunna get someone shot stealin mud flaps hahahaha great idea but.
Danger at the truck stop...
Please tell me someone was dumb enough to think he wasn't joking about taking a mud flap from a truck stop...