This does work! JR brought this to my attention with the first release of this video. I have since bought the required obdlink adapter and tried it out. My observations are that this is not for everyone, it is experimental software that is still evolving. I found LsDroid to be a great program for reading, writing, and cloning gen 3 pcms. It can now even do segment swapping. I have used it to clone a pcm I had already tuned with HPT to use in a mates LS conversion, it worked great and cost nothing! (for those wanting to know you can’t clone a hpt custom os tune) Tuner pro requires XDF files for each pcm os you wish to tune, at the moment there are only a couple of these available severely limiting the pcms you can tune. Also as JR says at the end of the video you can not flash the pcm when it is in the car, if there are other units talking on the serial data bus, or if your battery voltage dips down too low, you will almost certainly brick your pcm! A well built bench flashing setup is required. This makes tuning with tunerpro time consuming as you can not flash changes without taking the pcm out of the vehicle. For tuning my opinion is HPT or EfiLive are still the best options. I don’t like handing my hard earned $$$ to these companies but sometimes it is necessary to get the job done.
As I was watching this I was wondering if this would work on my s10 4.3 and you mentioned swapping an s10 ecm to use in a v8 application! Thank you for all the infortation you always give! Keep up the great work!
Hey Bro...i was looking for this..not sure why you took it down... Glad it's up again.. I've learned so much I would be willing to share... I can share it on your fb group.... Thanks for the help
Duude I need help. I am in the process of building a 5.3 lm7 for my caprice wagon. I want to do cam and springs. Do I just Google sloppy stage 2 cam and pac 12 18 springs and let it RIP? Or is there more to it then that?
@@TheDrivewayEngineer Yes I know there is a device to order, but the app I found is called OBDLink (OBD car diagnostics) in the app store by OBD Solutions, LLC. I guess this is not the correct app then.
THANKS VERY MUCH ! Trying to get some help , or a link to info/reflash or modify the 6l80e electronics to live behind a 99-07 5.3 . Sir your videos are incredible ,, again thanks .
Hey man I went ahead and bought all that shit went and got an ECM out of the junkyard and I can't get it to work man did they put a stop to it already or did I just get a bad oddlink lx ? Thank you in advance for your advice
For the PCM checksum I found them here. If Im not mistaking this Pete is the one who created LS Droid. If Im wrong please say so. ls1tech.com/forums/pcm-diagnostics-tuning/1921596-ls-droid-tunerpro-maf-scaling.html
He can continue to be dumb I guess, I have no moral obligation to honor his wishes, even if they made sense. As you can see in the video, and it's always been there, I always gave the A-hole credit. He just couldn't bother watching far enough before he made his little judgement.
Thanks for putting it back up, you are doing the lords work 😂
This does work! JR brought this to my attention with the first release of this video. I have since bought the required obdlink adapter and tried it out. My observations are that this is not for everyone, it is experimental software that is still evolving.
I found LsDroid to be a great program for reading, writing, and cloning gen 3 pcms. It can now even do segment swapping. I have used it to clone a pcm I had already tuned with HPT to use in a mates LS conversion, it worked great and cost nothing! (for those wanting to know you can’t clone a hpt custom os tune)
Tuner pro requires XDF files for each pcm os you wish to tune, at the moment there are only a couple of these available severely limiting the pcms you can tune.
Also as JR says at the end of the video you can not flash the pcm when it is in the car, if there are other units talking on the serial data bus, or if your battery voltage dips down too low, you will almost certainly brick your pcm! A well built bench flashing setup is required. This makes tuning with tunerpro time consuming as you can not flash changes without taking the pcm out of the vehicle.
For tuning my opinion is HPT or EfiLive are still the best options. I don’t like handing my hard earned $$$ to these companies but sometimes it is necessary to get the job done.
Thanks for the reupload. I watched this the first time but there's a lot of details I couldn't remember.
Hey guys. This works! Turn off Vats, Clone your working ECU in case the original gets fried. Worth the price of admission.
What if I told you this is a cool vid?! Thanks for the re-upload and info.
As I was watching this I was wondering if this would work on my s10 4.3 and you mentioned swapping an s10 ecm to use in a v8 application! Thank you for all the infortation you always give! Keep up the great work!
Eureka! TDE does it again! Man you just keep delivering! I love this channel.
If you push and hold your finger on the Bluetooth icon on any Android it will bring up the Bluetooth menu:) works for the wifi too
Never knew it.... Thanks man!
Great step by step setup. Thank you for taking the time to post. 👍
JR love the intro.
Hey Bro...i was looking for this..not sure why you took it down... Glad it's up again.. I've learned so much I would be willing to share... I can share it on your fb group.... Thanks for the help
Hmm very cool, now you got me thinking. A much cheaper alternative
Thank you for putting this back up
A lot of people are interested in the info, it's a shame to hold it back from people and I don't see the point really
It has helped me greatly and saved me alot. I appreciate your contributions to our community.
Great Video, Filled With All Kinds On Information.
Ok I see it in the post thanks
thanks big dawg. your the goat
Does this thing delete vats as well ? Also I notice you said it doesn’t work on 6.0 / 80e
I believe they are recoverable just have to open the pcms up pull the eeprom and flash it with like a tl866 or something
You can also short one of the header pins to ground.
I had been using the 2.0 and not bricking any. But it made me upgrade and I have bricked 2. I haven't changed anything
Nice desk mat, where did you get it? i've got identical xdm but 3.8
It's been quite a while, I think off Amazon
After you cloned the ECU did hp tuners work like the original? In other words 2 ECU's same hp tuners credits?
Great Question.
Yes
Love the glock deskmat
Very cool.
You're like the Edward Snowden of the LS swap world. The whistle blower for all the over priced bullshit. Lol. Keep it up.
😂
I don't want to live in Russia 😂
Duude I need help. I am in the process of building a 5.3 lm7 for my caprice wagon. I want to do cam and springs. Do I just Google sloppy stage 2 cam and pac 12 18 springs and let it RIP? Or is there more to it then that?
That's all you need
I keep reading something about the torque converter. I am just putting all this behind the 4l60e
And I'm going 8707 summit cam and pac 12 19 springs
Just ordered the parts
Did the app change name? I couldn't find LS Droid but found one called OBDLink. Is this the same app?
Obdlink is hardware, not software, look in the description
@@TheDrivewayEngineer Yes I know there is a device to order, but the app I found is called OBDLink (OBD car diagnostics) in the app store by OBD Solutions, LLC.
I guess this is not the correct app then.
Sorry. I'm an idiot. I jumped ahead on the video. I just assumed you got it from the app store.
JR, do you know of any repositories where tunes are available? Pay included.
Finished tunes? No.
@@TheDrivewayEngineer I know there is a big followers dream for it. Maybe in the near future!
Pete, the creator, has talked several times about establishing a repository, but it hasn't materialized yet.
THANKS VERY MUCH ! Trying to get some help , or a link to info/reflash or modify the 6l80e electronics to live behind a 99-07 5.3 . Sir your videos are incredible ,, again thanks .
It's not going to happen in a 24x crank trigger.
HAHA nice, wondering if this will work on an android tablet to make it easier hmmm. Thanks for the upload J.R.
Tuner Pro needs Windows, other LS Droid doesn't care.
My problem is the device registration. Do you need to have Bluetooth connected and plugged into your obd2 port for it to register?
Yes
Hey man I went ahead and bought all that shit went and got an ECM out of the junkyard and I can't get it to work man did they put a stop to it already or did I just get a bad oddlink lx ? Thank you in advance for your advice
I just used it last week and it was working fine
Right on Man I'll go threw my wiring and maybe try another ECM and see if I can figure it out thanks again
Does it work on e38 ecu??
Account access denied gearhead efi does anyone know how to post thread on website or have the bin files i need lq9 dbw please help.
Can delete vats ?
💪🏾💪🏾💪🏾
Can anyone tell me what bin and xdf mean? Never tuned before just curious to see how they do it.
Bin is the file type for the tune on the PCM.
XDF is the interface to tune in Tunerpro
@@TheDrivewayEngineer ok thanks for the clarification.
Wont let me open up the file on the gearhead website
I don't have anything to do with Gearhead or how they operate.
For the PCM checksum I found them here. If Im not mistaking this Pete is the one who created LS Droid. If Im wrong please say so. ls1tech.com/forums/pcm-diagnostics-tuning/1921596-ls-droid-tunerpro-maf-scaling.html
"No Credit" Tuning?
NICE
how about e38
How's it going... I need help with some lifters called T.S.P for some lifters no luck on the LS7 Lifters Any recommendations besides stocks?!?!
Raja Ayyad I got delphi ls7 lifters from Brian tooley racing a while back think they were around 100 bucks
I’ll sign up
Can I use with iphone
No silly, All the info says android.
✝️🇺🇸👍
Hell yes sign me up please!!!!!
I thought the guy that made this was being dumb?
He can continue to be dumb I guess, I have no moral obligation to honor his wishes, even if they made sense. As you can see in the video, and it's always been there, I always gave the A-hole credit. He just couldn't bother watching far enough before he made his little judgement.
@@TheDrivewayEngineer as long as you present it as information and not instruction.... fuhgetaboutit
What do presidents have to do with this? EPA isn't evil, don't do shit that pollutes. I tune and also have legal cats and pass emissions.
🍪🍪🍪
this shit does not work, ive torn my hair out trying to get it to work
Works for everyone but you, spamming my videos is a great way to get help with it
The Driveway Engineer it actually was, good looking out